Configuration of version of the highway X8.2.1

Similar Questions

• . "I came with an InvalidOperationException: the form doesn't start, load t. ' error is: mixed mode assembly is built against the version of the v20.50727 and cannot be loaded in the 4.0 runtime without additional configuration information.

  Dear Sir.

  If you could please tell me where these options are specified and what additional information is required, I would greatly appreciate your good advice.

  Thank you kindly.

  I use VB2010 and Windows 10

  Hi jeffreykap123,

  Looks like you are using an earlier version of the .NET Framework in your project code while the project is configured to use the 4.0 Framework. I recommend you take a look at the following articles from Microsoft about a similar behavior. They should resolve this error message.

  https://blogs.msdn.Microsoft.com/jomo_fisher/2009/11/17/f-scripting-NET-4-0-and-mixed-mode-Assemblie...
  https://msdn.Microsoft.com/en-us/library/bbx34a2h.aspx

• Configure the Jar Versions at the site level using OSGI

  Hello

  We have a utility class deployed as bundle OSGI which is used in two different sites, now I need to update this useful for a single site and the other site should not be affected by this change. How can I configure the version of the POT to the site/component level to achieve this?

  Concerning

  Deepika

  Let's say that your package exports the com.myco.util package. You have two beams export this package, one with version 1.0.0 and the other with the 2.0.0 version.

  You want to use the version 1.0.0 on Site A and version 2.0.0 on Site B.

  In the package containing the servlet used on Site A, you would incorporate com.myco.util; version = [1.0.0,2.0.0). In the package containing the servlet used to Site B, you would be important com.myco.util; version = 2.0.0

  Note that this will not work for scripts. All scripts use the same dynamic class loader no matter where the script is contained.

• WSN NI 9792 safety 1.2: initial configuration? By default the username and password?

  Hello

  With NI WSN 1.1, using a 9792, I can click on the button set the permissions, and if none had been defined would simply ask me a new administrator password.  Now with NI WSN 1.2, when I click on the button set the permissions he takes me to the web interface of the 9792 and said "nobody is connected or you don't have permissions to view/edit users, groups, and permissions.»  When I click on the "connect" button, a box opens and asks me a username and password.  I scoured the notes version of the help files and the internet, and it seems there is NO documentation on how to set up the first name of username/password combination, or it indicates what combination of username/password default username there might be.  I also tried a brand new 9792 straight out of the box and load of 1.2 to this subject and it has the same problem.  Is there something obvious that I'm missing?  How a person initially configure security on the 9792?

  Hello, Garrett,.

  Thanks for your post!

  Looks like you're having need for information on how to find the information of your 9792 newspaper. When you use NEITHER-WSN 1.1 allowed us users to define the initial password and this is still the case for the 9791. The 9792 is a gateway OR WSN node and a target time LabVIEW Real-time. Its default log in information or lie in a (KB) Knowledge Base using LabVIEW or helping MAX. You use LabVIEW 2009 SP1 or LabVIEW 2010?

  The default name of the user and the password is the following:

  user name: admin

  password:

  KO

  By default the username and password for the newspaper in a real-time controller

  http://digital.NI.com/public.nsf/allkb/14D8257A7724BE85862577F90071B73F

  Help of LabVIEW

  Start > all programs > National Instruments > xx LabVIEW > LabVIEW help

  Then go to... Fundamentasl > working with egalitarian and target > how-to > control and configure a remote device from a Web browser

  Help MAX

  Open MAX > help > MAX Help (can also press F1 if open MAX)

  Then go to... Help MAX remote systems > LabVIEW Real-time targets Configuration > Device Configuration > logging into your system

  The help link above LabVIEW is called in 9792 under Related Documentation start guide that directs you using LabVIEW.

  NEITHER Wireless Sensor Network Getting Started Guide

  http://www.NI.com/PDF/manuals/372781c.PDF

  Is the information you were looking for? Please indicate if there is something else we can do.

  See you soon

  Corby

  WSN PES OF R & D

• Version of the firmware OR VST

  How to query the version of the firmware of a NOR-VST module (more precisely, the SMU-5646R NI) a C application?  I see the firmware version in MAX, but this module does not support the functions niRFSA_revision_query or niRFSG_revision_query.

  It is indeed the case, thanks broading the scope of the question, I was able to locate this example of community for you:

  https://decibel.NI.com/content/docs/doc-41906

  This example uses the System Configuration is actually NEITHER MAX, this is to say that these VI communicate with MAX OR hardware/software information.

• When configuring activesync, I get the error "network unavailable synchronization." I am able to access OWA

  I use Samsung Corby mobile phone. When I'm trying to set up active sync, it gives me error like "network unavailable synchronization." I am able to access OWA on my PC. I checked and there is no problem on the mobile Internet, because I'm able to visit other sites. Few details may help you to answer the question:

  Mobile model: Samsung Corby

  Model number: GT-B5310

  ISP: AIrtel

  This is the 1st time I'm trying to configure activesync.

  I visited a few items and they reported similar problems from other models of Samsung too. I visited the link: http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=02a84b0b183aa54a&hl=en

  Does this mean that I have to change the handset or samsung is not recomnmended for Activesync?

  Hi Sandeep Singh,

  1. which version of the operating system is installed on your computer?

  2. what version of ActiveSync are you using?

  ActiveSync application is used for faster file transfer and synchronization of photos via Outlook are available for Windows Mobile 5.0 powered devices.

  I suggest you to consult the following link to learn more about Active Sync.

  http://www.Microsoft.com/download/en/details.aspx?ID=15#overview

  I suggest you to contact Samsung support for more information.

  http://www.Samsung.com/us/support/#

• Updated OEM 98 to XP. XP becomes a full version, with the possibility to move to another computer?

  I upgraded an old computer Gateway for Windows XP Home(It had Windows 98 from the manufacturer).  When I built a new computer some time ago I moved the upgrade Windows XP to the new computer.  Is it legal under the terms of the license or is it not because I upgraded an OEM version?
  The reason why I need to know that it's because I'm going to buy Windows 7 on this computer and I have to buy a Family Pack or a full version, according to the licence proves to be.

  Just to note, I no longer use the copy of windows 98 (obviously).

  In fact, you are not in compliance with the EULA. Strictly speaking, the installation disk of Win98 gateway you used as support of qualification was OEM and thus related to the original gateway computer. Once again, strictly speaking, it could not serve as qualifying media for upgrade XP on another computer. Of course in real Life (tm) that you've discovered - it worked.

  I suggest that buy you a full version of Windows 7, even if it's more money. Plenty of retail versions do not come with restrictions and are therefore much more flexible. Make sure that your computer will support Windows 7 first, with the required and hardware configuration. Here are some links that you may find useful:

  Upgrade paths - http://technet.microsoft.com/en-us/library/dd772579%28WS.10%29.aspx
  Excellent how-to for upgrading to Windows 7 - http://lifehacker.com/5385127/prep-your-pc-for-windows-7
  What Windows 7 is right for you? Excellent comparison by CNET reviews - http://reviews.cnet.com/8301-31012_7-10379487-10355804.htmlStop
  Windows 7 system requirements - http://windows.microsoft.com/systemrequirements
  Windows 7 Application Compatibility - http://technet.microsoft.com/en-us/windows/aa905066.aspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• How to know the version of the 8500 a firmware

  I have a 8500 Premium A910N printer. How do I know the current version of the firmware?

  If I do the following when I complete step 5 it flashes and returns to the main screen where I started.

  1. on the Control Panel, I touch right arrow.

  2. press Setup.

  3. press on the configuration of Web Services.

  4. press on the updates.

  5. press on Check for Updates.

  Hello

  Printer firmware version can be known by the impression that self test report.

  To print the self-test page

  Press Setup > reports > Printer Status Report

• Version of the operating system incompatible with Startup Repair tool

  I'm trying to reimage dell inspiron 1525. Operating system is Windows Vista. Error received halfway through restoration. Has been reduced to system recovery options. Startup Repair has chosen to be tell version of operating system incompatible with Startup Repair tool. Now I cannot do anything else.

  Hello
   
  1. you use the correct version of the Vista disc to run Startup Repair?
  
  2 you also all error messages /codes when you startup repair?
   
  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.
   
  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.
   
  a. Insert the Windows Vista installation disc.
  b. restart your computer.
  c. If prompted, press any key to start Windows from the installation disc.
   
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
   
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. on the System Recovery Options menu, select the memory diagnostic tool.
   
  Once scanning is complete, check to see if the problem is resolved.
   
  Access the link below to learn more about Windows recovery options in Windows Vista.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem
   
  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.
   
  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.
   
  You can also contact Dell support and check if you need to replace any hardware.
   
  Aziz Nadeem - Microsoft Support

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to install the version of the windows license, so can I have a windows license, I have install windows 7 with this key?

  I have the windows product key 7 with my computer dell laptop. in recent years my brother using the pirated version. now, I want to install the version of the windows license, so can I have a windows license, I have install windows 7 with this key?

  Original title: windows 7

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Multiprocessor Configuration does not support the installation of Windows 7 64-bit.

  I'm going as a joint discussion on the multiprocessor Configuration not supported during the installation of Windows 7 64-bit. I have a HP with a motherboard HP xw6200 workstation. The Machine has dual Zeon 3.20 Ghz. the procesors are identical. There bus 800 MHZ front. It has 6 gigs of 400 MHZ DDR2 Ram. I've updated to the latest version of the bios a few months ago. It has worked very well in dual boot with the last pack of 64-bit XP and Vista 64-bit SP1 for a long time. I tried to upgrade using a clean 64-bit Windows 7 installation when I got the error Stop Multiprocessor_Configuration_Not_Supported: 0X0000003E. I tried to upgrade to Vista and XP with the same error message. I also installed a new unformatted disk and tried to install the operating system again through the CD and got the same error.

  Hi ITCoreTeam,

  Welcome to the Microsoft Answers community.

  Test the material under test once, by contacting the manufacturer. The problem is caused due to hardware.
  Cause: This situation can occur if the incorrect processor packages are used or if the BIOS incorrectly allows a processor erratum.

  Download the update available in the link below and install it. It may solve your problem.

  http://support.Microsoft.com/kb/973879/

  I suggest you have a look at the similar problem and the troubleshooting steps by visiting the link below.

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/b993c1f9-A1E2-4023-bc7a-0507189a1b8c

  I suggest you to contact the manufacturer of the computer to update the chipset drivers as you have updated the BIOS of your computer.

  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• MS15-029 (KB3035126) does not apply but the version of the file does not match the KB article

  I have a small number of Windows 7 x 64 workstations that will not apply the KB3035126 patch, but they always show as having older versions of the WMIPhoto.dll file.  This would mean that they still have vulnerabilities that are specified in the article, correct?

  WMIPhoto.dll version on my computer which does not apply the update:
  6.2.9200.16440

  WMIPhoto.dll version after you apply the hotfix in KB article:

  File version size file name Date time file platform
  C:\windows\system32\wmphoto.dll 6.1.7601.18742 392 192 4 February 2015 03:16 x 64
  C:\windows\system32\wmphoto.dll 6.1.7601.22949 392 192 4 February 2015 03:46 x 64
  C:\windows\system32\wmphoto.dll 6.2.9200.17254 465 920 4 February 2015 03:16 x 64
  C:\windows\system32\wmphoto.dll 6.2.9200.21371 465 920 4 February 2015 03:46 x 64

  KB article:

  https://support.Microsoft.com/en-us/KB/3035126

  I'm deploy the patch with Configuration Manager 2012 and it came out to the majority of customers successfully.  Configuration Manager does not show the other guests as requiring even the patch, so I think its not required, but the associated dll files show always as old.

  I looked for any other reports of this issue, but nothing comes back.  For any idea or suggestion is appreciated.

  Hello

  
  Thank you for visiting Microsoft Community.
   
  I suggest you to post your query on our TechNet Forums social as this question right here.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information helps.

  Thank you.

   
  Sincerely,
  Ankit Rajput

• "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

  Hello

  I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

  Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

  Hello Rdforbe,

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
  System opened by clicking on the button start , by clicking on the Control Panel, click System.
  Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Identify the Version of the Firmware

  My HP Officejet 6500 a Plus has the version of the firmware CIP1FN1206AR installed (as shown on the network configuration page information). The latest firmware from the website is OJ6500_E710n-z R1206A.exe dated 09/05/2012.

  How can I determine if the installed version is the same or different from the version of the site?

  My operating system is Windows 8.1

  Welcome to the MRW500 forums

  You seem to have the same Firmware version as stated on the hp Web site. I took a page for you to see.

  Source

  

  I hope that helps! Have a great day!