configuration wireless and adsl2 + Cisco 857w

Similar Questions

• Configuration wireless and Bluetooth on HP Pavilion p050sq-15 Notebook PC

  Hello, I just bought a laptop computer (Pavilion 15-p050sq). I am using windows 7 ultimate x 64.

  I want bluetooth and wireless drivers for my laptop.

  And a second question is, wich turn wireless button or wich order fast for example fn + f12 (btw it does not work)

  I need help to set up the wireless network...

  Sorry for my English guys...

  Hello:

  Here are links to the drivers you need...

  Wireless:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.TPST=swdMain&s...

  Bluetooth:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405371&SP...

  SM Bus controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131822-1&cc=us&DLC=en&LC=en&OS=4063&product=7265072&sw_lang=

  PCI Simple Communications controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131838-1&cc=us&DLC=en&LC=en&OS=4063&product=7265072&sw_lang=

  ACPI\HPQ6007:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137939-1&cc=us&DLC=en&LC=en&OS=4063&product=7265072&sw_lang=

  ACPI\INT33A0:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131840-1&cc=us&DLC=en&LC=en&OS=4063&product=7265072&sw_lang=

• Cisco ACS 5.3 selection of service needs for RADIUS PEAP wireless and 802. 1 x Port Auth

  I use ACS 5.3.0.40.8 with GANYMEDE + maintenance device AAA and RADIUS maintenance the Cisco Wireless to access user AD environment. How can I implement 802. 1 x with the current implementation of RADIUS with users without distracting current thread or am I prevented due to the EAP - GTC used with PEAP via RADIUS?

  Sent by Cisco Support technique iPad App

  In general the EAP type is determined by the supplicant and the server

  so if you have configured for EAP TLS and client cable configured wireless client

  for PEAP MSCHAP v2, you shouldn't have any problems if you have access

  RADIUS service and handling the two types of active EAP and identity

  political as well as the authorization is right to the same target and the level of access.

  See you soon

  -------------------------------------------------------------------------------------------------------------------------

  Please don't forget to rate correct answers

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• my computer does not have an installed and configured wireless network adapter

  I just installed a new hard drive on my computer of dell inspiron 1525. I am not very computer but I managed to do it and it works. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However, I can't connect to the internet. He always tells me that I have not installed and configured wireless network card. When I go into computer management, there is no network adapter. There are "other devices" which device base system list three times with properties that say that the drivers for this device are not installed (code 28) but it won't let you not reinstall drivers and to be honest, I don't even know what the "other devices". There is also an ethernet controller that says the same thing. A network controller and the properties say he has not configured corr. (code 1) but won allow you to install because windows cannot find the driver for the device. He says that if you know the FAB of the device, you can visit the site Web-manufacturer of this device? As you can see, I'm not very computer. So, how can I connect to the internet. I have Verizon wireless at home. Thank you.

  well, I think that I thought about it. I right click on each of them separately, and I think I can have it now.

  Thank you

• Wireless and wired router, DHCP and "visibility".

  Okay, it's a bit complicated, but I'll explain better than I can.

  I have a wired Linksys RV082 router. It works very well but is not wireless.  I have a Cisco/Linksys E2500 wireless router for my wireless devices to use.  the RV082 is the network of 192.168.1.x. The E2500 is the network of 192.168.0.x.  Cable Internet goes to the RV082 Wired, and a line out from there to the wireless router.  This all works fine except for a few disadvantages.

  I have an iPad that connects wireless and some of the apps offer a http:// option, so I can transfer files to this application.  I also have a network printer connected to wired and wireless devices do not.

  I have 2 problems:

  (1) in order to transfer files from my laptop (that I hung on the cable network most of the time), I disconnect the wire, wireless, then I can transfer files.  Œuvres, but it's embarrassing.

  (2) I want a netbook that I have on the wireless connection to print on my printer wired network.

  It seems that the 2 networks do not see each other.  Here are the things I've tried:

  (1) I disabled DHCP on the wireless router.  My thought is that requests for an IP address to the wireless router has sent will be transmitted along my wired router... NOT.  On my iPad and Wii, they could no longer connect wirelessly. Strangely enough, with the disconnected wire and wireless connection with my laptop, I've still was getting a 192.168.0.x IP address, even if the DHCP service is disabled on the wireless router.

  (2) thinking I would put manually the wireless router on the 192.168.1.x network, instead of saying things to get an Internet connection IP dynamicaly, I manually the IP value is 192.168.1.245.  Serious mistake.  I couldn't connect at all anywhere then.  The only way I could fix it was to hang on to my laptop computer, assign a static IP address to my laptop on the same network as the router, then I was able to get to the configuration page and to put things like he was.

  Another thing... Even when I'm connected only plugged on my laptop and wireless is disabled, I ping 192.168.0.1 (the wireless gateway) and it returns a value. But, when I try to go in a browser, I get a "page not found" error

  So, how can I get these two networks to play well and see each other?

  Thank you

  Jesse

  Put the router E2500 'bridge' mode and it will transmit the RV082.

  Assign E2500 DHCP, an IP address for itself of thje RV082, it will just be for access to the web administration E2500. System powered via the E2500 wired or wireless IP addresses will be obtained from the DHCP server on the RV082, and these will all be on the same subnet as designed to be plugged into the side of the RV082 LAN.

  Should allow you to do exactly what you want to do.

  I have a similar setup here works well with an E4200V2 right now.

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• Hub BT 1800 HG wireless and card PC Laptop/1060

  Hello

  I have a portable S2410-304 Toshiba without a Wireless LAN mini. I connected the laptop to the BT Wireless Hub via the Ethernet connection without no problems whatsover, and the broadband connection is great. However, I tried to get the BT Voyager 1060 portable Wireless PC Card to work with no joy either.

  The laptop has Windows XP SP2 and wireless broadband is via the supplied software, rather than through Windows XP. The laptop recognizes the card in the PCI slot, but for some reason any does not have a signal coming through the router.

  I have another laptop and I have the Ethernet connection and wireless LAN works without any problem. I've uninstalled and reinstalled the software, swapped the PCI slots and (as I have two cards) even tried the other card (and they both work in my notebook to another). I contacted BT and they told me to try uninstalling Norton and make sure that the Windows Firewall has been turned off and re - install. Still no joy.

  Does anyone have any ideas as to why the router and the map don't communicate wireless, and yet they're fine an Ethernet cable?

  Thank you

  Steve

  [Edited by: admin]

  Hi Lim

  If the card is recognized and installed properly there must be a problem with BT card settings and configuration of the card. The only thing I can recommend is to check all the settings, especially in the Center BT wireless.

  Good bye

• HP Photosmart D110 - wireless and wired to installation - at the same time

  PLEASE READ CAREFULLY THAT NO MATTER HOW MUCH DETAIL I SAY QUESTIONS. IF ALL OF THE OTHER INFO. IS NEDDED IT PLEASE LET ME KNOW.

  Hello community I am undergoing, step by step, how can I set up my printer to a network via Wired and therefore any other device connected to that network can print from it.

  I used to have my printer connected via connected to my main PC, but it soon came the need to print from other places in my house and I remembered that my printer has this great ability, so I wanted to know how, step by step. I tried to put in place by myself, but I couldn't, I myself helped with the HP Solutions and Guides, and somehow, I missed something.

  Details:

  OS main PC: Windows XP 32-bit (it has the latest updates)
  Printer: HP Photosmart D110 one
  Router: Time Capsule from Apple

  I uninstalled the printer from my computer, so don't be any errors.

  Here's the deal, I want to connect my printer to my main PC via Wired (cable), once correctly installed, I want to connect this printer on my wireless (Network Time Capsule), so any other device connected to the network can print from it.

  If someone can take the time to tell me how to do, step by step, with links from HP information. etc if necessary.

  I already know how to set up a static for my printer IP address and all the stuff in IT, so don't worry, everything you say me that I understand it, all I need to know is what to do exactly, but the case is when (step by step).

  Thanks in advance.

  Hello, I noticed that you said 'Network via Wired' and then he said "wireless. I will be happy to help you. Just to let you know, you can't be WIRELESS and NETWORK CABLE (Ethernet). You can be wireless and plug the main PC into the USB cable. So, here are the steps to download the drivers and the connection to your PC (USB) PRINCIPAL and others (wireless).

  Connection to MAIN PC wired (USB)
  1. connect the USB cable from the printer directly to the main computer.
  2 download the drivers from the Web site (http://goo.gl/BVOOg), or if you have the CD.

  Note: whenever you download the software and drivers on the site. Be sure to choose the SOFTWARE from FEATURE COMPLETE.
  1. Select software and drivers
  2. type in the name of the product (click Search)
  3. choose the operating system (click Next)
  4. choose Download (scroll to the bottom for the SOFTWARE of FEATURE COMPLETE)
  5. After downloading the software, it will PULL
  6. it will give you an option on how you want that it connected
  7. you choose USB to the PC of the hand

  WIRELESS NETWORK connection
  1. go into your printer settings
  2. Choose Network
  3. Select wireless CONFIGURATION WIZARD
  4. it will search your router (if wireless). Choose your router and configure the printer wireless upward.
  5. go to other computers and follow the steps above to download the drivers.
  6. when it comes to SELECT connection, choose (without wireless/network)

  In this way, you can print from your main PC via USB (wired) and the other wireless computers.

  If your ROUTER is not wireless, and you can only use a wired (Ethernet) network, then you can print only by plugging the cable ETHERNET router to any PC of your choice print from the moment. Also to plug another cable from the router to the printer.

  I hope this helps, if you need more help please ask, thank you.

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.

• Can I configure wireless mg3122 without installation disc printer?

  I recently moved and have lost the installation disc for my MG3122 printer. Can it be configured without it to use wireless without it or where I can get another copy of the installation disc? Any help would be greatly appreciated. Thank you

  Hi glass9711,

  The printer can be configured wireless using the latest drivers on the Canon USA site.  So we can provide you with instructions to download the drivers for your computer, please answer with this operating system you have (Windows or Mac OS X version).

  We look forward to hear from you!

  If it is a question of time-sensitive, additional support options are available to contact us.

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

• Windows Vista not installed or configured wireless adapter.

  In windows Vista, after a new new installed, I can connect is the internet.

  Windows cannot find any networks to connect, if I can connect to internet with my other computer.

  When I ask to "Diagnose why Windows cannot find any network" he said that this computer does not have an installed and configured wireless network adapter.

  The wireless worked well until I reinstalled windows.

  I could use another computer to download all software/drivers related to WIFI from the Web from Toshiba site after entering in my specific computer, and I installed it all. This solved my problem. Thanks for the help.

• SRW2048 and a Cisco 1841

  I am trying to Setup VLAN between a 2 and a Cisco 1841 router SRW2048 switches. I have ports that connect the 2 switches to the other and the port that connect to router as junction ports. I set 2 VLANS. VLAN 1 is just the vlan by default everyone runs and vlan will be the area demilitarized. I have no configuration of access control lists to block traffic, but when I assign vlan 2 on the port that the server is, I can not ping to the gateway. I don't know what is happening, see below for the cleaned configs.

  1841:

  Current configuration: 4282 bytes
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime localtime show-time zone
  encryption password service
  !
  hostname QCSLOLURTR01
  !
  boot-start-marker
  start the system flash c1841-advsecurityk9 - mz.124 - 25B .bin
  boot-end-marker
  !
  logging buffered debugging 8192
  !
  AAA new-model
  !
  !
  AAA authentication login default group Ganymede + local
  the AAA authentication enable default group Ganymede + none
  !
  AAA - the id of the joint session
  clock timezone CST - 6
  clock to summer time recurring CDT
  IP cef
  !
  !
  property intellectual auth-proxy max-nodata-& 3
  property intellectual admission max-nodata-& 3
  !
  !
  no ip domain search
  IP domain name qcsupply.com
  !
  !
  !
  user name x

  Archives
  The config log
  hidekeys
  !
  !
  x IP ftp username
  x IP ftp password

  !
  !
  crypto ISAKMP policy 1
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  ISAKMP crypto key QCSLOLU address x.x.x.x No.-xauth
  !
  !
  Crypto ipsec transform-set esp-3des esp-md5-hmac ts1
  Crypto ipsec transform-set esp - esp-md5-hmac ts2
  !
  VPN-map 10 ipsec-isakmp crypto map
  defined peer x.x.x.x
  Set transform-set ts1
  match address 101
  !
  !
  !
  interface FastEthernet0/0
  Description QCSL OLU INTERNET CONNECTION
  IP x.x.x.x where x.x.x.x
  IP access-group denied-hack-attack in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  No cdp enable
  card crypto vpn-map
  !
  interface FastEthernet0/1
  no ip address
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1.1
  encapsulation dot1Q 1 native
  IP 10.60.90.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  interface FastEthernet0/1.2
  encapsulation dot1Q 2
  IP 10.60.89.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  interface Serial0/0/0
  no ip address
  Shutdown
  !
  Router eigrp 100
  Network 10.60.89.0 0.0.0.255
  Network 10.60.90.0 0.0.0.255
  No Auto-resume
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 x.x.x.x
  !
  no ip address of the http server
  23 class IP http access
  local IP http authentication
  no ip http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  IP nat inside source map of route-nat interface FastEthernet0/0 overload
  IP nat inside source static tcp 10.60.89.10 80 80 extensible x.x.x.x
  IP nat inside source static tcp 10.60.89.10 expandable 443 443 x.x.x.x
  IP nat inside source static tcp 10.60.89.10 2021 x.x.x.x extensible 2021
  IP nat inside source static tcp 10.60.89.10 6100 6100 extensible x.x.x.x
  IP nat inside source static tcp 10.60.90.13 80 80 extensible x.x.x.x
  IP nat inside source static tcp 10.60.90.13 expandable 443 443 x.x.x.x
  IP nat inside source static tcp 10.60.90.13 1494 x.x.x.x extensible 1494
  !
  deny-hack-attack extended IP access list
  allow udp 0.255.255.255 x.x.x.x any eq snmp
  deny udp any any eq snmp
  deny udp any any eq tftp
  deny udp any any eq bootpc
  deny udp any any eq bootps
  deny ip x.x.x.x 0.15.255.255 all
  deny ip x.x.x.x 0.0.255.255 everything
  allow an ip
  !
  record 10.10.5.30
  access-list 23 allow 10.10.10.0 0.0.0.7
  access-list 99 allow 10.0.0.0 0.255.255.255
  access-list 99 allow x.x.x.x 0.0.1.255
  access-list 101 permit ip 10.60.90.0 0.0.0.255 10.10.0.0 0.0.255.255
  access-list 101 permit ip 10.60.89.0 0.0.0.255 10.10.0.0 0.0.255.255
  access-list 105 deny ip any host x.x.x.x
  105 ip access list allow a whole
  access-list 111 deny ip 10.60.90.0 0.0.0.255 10.10.0.0 0.0.255.255
  access-list 111 deny ip 10.60.89.0 0.0.0.255 10.10.0.0 0.0.255.255
  access-list 111 allow ip 10.60.89.0 0.0.0.255 any
  access-list 111 allow ip 10.60.90.0 0.0.0.255 any
  SNMP-server community no RO
  map of route-nat allowed 10
  corresponds to the IP 111
  !
  !
  RADIUS-server host x.x.x.x
  RADIUS-server key x
  !
  control plan
  !
  Banner motd ^ C

  x

  ^ C
  !
  Line con 0
  line to 0
  Modem InOut
  Discovery to automatically configure modem
  autohangup
  Speed 2400
  line vty 0 4
  location * Access Virtual Terminal allowed only from internal network *.
  access-class 99 in
  privilege level 15
  transport telnet entry
  line vty 5 15
  access-class 23 in
  privilege level 15
  transport telnet entry
  !
  Scheduler allocate 20000 1000
  end

  SRW2048 #1:

  Port 1: Trunk (to the router)

  Port 2: Trunk (SRW2048 #2)

  Prot 24: VLAN 2

  SRW2048 #2:

  Port 1: Trunk (of SRW2048 #1)

  Any ideas?

  Because the SRW is now part of Cisco Small Business, it would probably be best to ask the Cisco Small Business support community. You find people from Cisco over there.

  For SRW configuration, you added the two VLANS to your trunk ports? Configuration of a port in trunk mode adds automatically that all configured VLAN to the trunk.

  The server has a static IP address in the DMZ LAN?

• RE: router wrt310n - need help for configuring wireless security

  I can get wireless if the router is not secure, but cannot configure wpa and wireless security.  Instructions followed on linksys tutorial but still connect wirelessly if I select wpa security.   In addition, I can't find a way to change the ssid, the pages of router do not match documentation.  The version of my router is v1.  Is this obsolete, I know that there is a v2.  Any help will be appreciated.

  Please follow these steps to configure the wireless settings and try to connect to the wireless network.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  IF YOU ARE NOT ABLE TO CONNECT TO THE RADIO