Configurations of lost and extensiions after update to version 19.0.2

Similar Questions

• I still have the issue of permission after update latest version of LR

  I still have the permission problem after update latest version of LR even I already did what you suggest in the other discussion.

  I found the solution.

  You must follow the steps below:

  • Open Finder
  • Choose the menu go to, select go to folder
  • Type in ~/library and click go
  • Open the Application Support folder
  • Give full read and write permissions for everyone to the Adobe folder
  • Similarly, you have to give all the permissions file to Adobe location: Macintosh HD/Library/Application Support/Adobe

  I can made the order wrong earlier.

  Thank you all

• nik software/filters have gone after update from version 2015cc photoshop?

  nik software/filters have gone after update from version 2015cc photoshop?

  Hello

  Must copy CC 2014 Photoshop plugin folder and replace the file in Photoshop CC 2015.

  In windows, please go to C:\Program Adobe Photoshop CC 2014. Copy the plugin folder

  and paste the folder inside the Photoshop CC 2015

  In Mac, please go to application. There will be a folder of Photoshop CC 2014 inside it will be a plugin folder and copy it and replace the same folder in Photoshop CC 2015.

  Let us know if this helps

  Thank you

• I lost my sound after updating my audio and video drivers

  After the download and installation of updates of my audio and video drivers, I lost my audio device. My Volume mixer, I get the message "no audio device is installed". At this point, I am really confused and frustrated after sent to websites other than Microsoft to get answers. Any help will be greatly appreciated.

  I have updated drivers AMD and ATI Radeon, neither of which are on my task bar more as they were before the update.

  I use "Windows Vista Home Premium Service Pack 2" at the moment.

  Model: HP Pavilion dv7 Notebook PC
  Processor: AMD Turion (TM) X 2 Dual-Core Mobile RM-72 2.10 GHz
  System type: 64-bit Operating System

  Hello

   
  I suggest you to follow the steps in troubleshooting section and check if it helps:
   
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  
   
  Also, follow the steps from the link:
  Don't fix no sound or Audio problems in Vista
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00833257&tmp_track_link=ot_recdoc/c00898606/en_US/c00833257/loc:1 & cc = us & dlc = en & lc = en & Printable = yes & product = 18703
   

• Windows 7 Home locks up and sunk after update

  I just did a update on my Win 7 64 bit HP Pavilion HPE system that crases the system and is unrecoverable. Locks system for 20 seconds at the beginning of the start screen continues and then crashes hard after four pulses of the windows logo. I tried using the repair program, but it does not work. I tried to restore to a previous restore but point that fails with unspecified error. I have rebuilt the system four times since the recovery partition and a set of recovery disks, but the problem returns as soon as an update is done. I even went so far as to rebuild the system with Win 8.1 and which seems to work fine but I hate Win 8 and it consumes 90% of my ability to drive so I reinstalled a fresh copy of Windows 7 and did all the updates of 180 with all that appears OK until that last reboot when the system locked again.  The generation recovery clean failed for an unspecified error (0 x-8000ffff). How can I get control of my system back and disable the update which is the origin of all this? I can't keep the reconstruction of the system and use trial and error to find the wrong update in this life.

  What you reinstall?

  Having correctly installed March 2015 updates now?

  Configuring Windows Update system never proposed update driver?

  The USB 2 cable connects to the computer on an external drive? (Windows Update will download the installation programs of updates on the drive with the most available space).

  • USB 2.0 cables can be used with 3.0 ports but the transfer rate will return you 2.0 flow and power limitations. CF. http://www.usr.com/en/education/usb-30-peripherals/

  Answers to the questions below:

  I reinstalled Win 7 Home from the restore hard disk partition.

  All updates are current and installed successfully.

  I disabled automatic updates (although windows seems to change this return on its own to update automatically).

  I understand that a USB 2 device will only work at speeds of 2 even when connected to a USB 3 port USB but it should work and does not cause the blocking system. The device I had connected to port USB 3 was an Extender port with nothing else hooked up behind her, no disk or anything at all.  It should not cause this problem.  I have a backup disk connected to another USB 3 port, but that has not changed with that between blocking and so successful startup which can not be a contributor.

  In all cases, the problem is now resolved, and that I won't just plug a USB 2 device into a port of St.

• lost organize bookmarks after update 4.0.1

  It doesn't seem to be a part of the tab for organizing bookmarks!
  This after updating to 4.0.1

  "Bookmarks > organize bookmarks ' has been renamed to"show all bookmarks"in Firefox 4.

• BlackBerry smartphones lost my Memopad after upgrade to version 4.5

  I've recently updated to version 4.5, and after installation, I noticed that a lot of things were missing, so I did a restore to my last backup.  After restoring my backup, I always noticed that my memopad is missing.  When I look at my list of files in the backup, it shows my memos as unavailable because they have been configured for a wireless or wireless backup sync and are read-only.  Is there a way to fix this and restore my notebook and memos?  Any help would be much appreciated!

  Thank you

  Seems that you have not ' check the box for her when you went into the application loader process.

  Simply plug back application loader to and run again and check all the boxes.  It will install the missing apps.

• After updating to version 31, Firefox can no longer connect to the web.

  After updating Firefox to v31 and I reworded Firefox is no longer can go to any Web site, while Chrome and IE continue to work properly.

  Steps, I tried:
  -restart Windows
  - https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a & as = aaq
  - https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating?esab=a & as = aaq
  -from Firefox with 'Disabled Modules' (Safe Mode)

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission get full and unrestricted, access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• I can't delete cookies after update from version 9.0.1, also the opening, I have 2 new cookie files that disappear at the close of FF.

  I have uninstalled/reinstalled 9.0.1, is the same thing. Check my profile, cookies.sqlite is if FF is closed or uninstalled. When installed and opened, I have 2 new files, wal - cookies.sqlite and cookies.sqlite - shm, as well as of cookies.sqlite. Is this the reason why I can't delete cookies? Also, I and enabled AdBlock Plus and the navigation of private life. After update, I can't post anything in support of FF (this is my 4th attempt, Safari finally used to post) and files under Tools, as clear history are accessible, I shouldn't have a history to remove.

  (1st edition)
  Ok. I reinstalled FF 9.0.1 Safari, but not directly from Mozilla. I used CNet, now things work as they should. I have no cookies listed, except those I want. Private browsing does not work correctly. However, I still have these 2 additional cookie files; -wal-shm.

  (2nd edition)
  I spoke too soon. After accessing sites that I frequent, the 'ad' cookies are back (adbright, realmedia, 247realmedia) and cookies from the site are eliminated, only not here, spent. Now I can't connect to anything and am back to Safari to access the Support Forum of FF. Have I not a bug? Someone please help, I'm desperate, I hate IE, Safari, Chrome, etc. They have neither the level of ad and pop elimination - up that Firefox has; and they don't have the level of customization that Firefox has. 2 additional cookie - wal-shm files, are always there when FF is open and disappeared again the closure of FF. One last thing, I noticed, I have a request of support for Chrome file in my library. The cookie file Chrome could interfere with the FF cookies? I do not think, I have Safari, as well, and no browser has ever interfaced with each other before.

  (3rd edition)
  I have uninstalled/reinstalled FF, all my modules and also tried to delete the cookies.sqlite document in the FF profile file, nothing happens. I counted, there are 14 sites listed in preferences > privacy > pane show Cookies (no pun intended) and they are all sites of "ad". These sites are also listed as sites blocked in Adblock Plus. Until a person pick up, I give up, I don't know what else to do. He there was that the only time that cookies were gone pane show Cookies, every other time I have uninstalled/reinstalled anything, they were still there. So, until someone can help me, I'm stuck. The only thing I did is removed altogether-profile file. It's the last thing I want to do, unless I can save my favorites somewhere to return after reinstalling. If this is not corrected in the next few days, I can just try, too.

  I think I solved my problem. I activated the safemode, then activated each Add on, one at a time, reboot FF between each activation. I don't have the add-on TACO. I hope this is the end. Thank you for your response. I appreciate it.

  Little puzzle, this particular post was not the first in which I posted this question. However, it is the only one that I thought was actually posted on the forum. The first two attempts, I thought had not displayed. Today, there are all the posts with the same problem. So, I really thank Mozilla for their patience and all the people who have taken the time to read this and the other two positions. I apologize for the repeated messages. I really didn't know that they had been posted because I couldn't find their afterwords to edit with my attempts to fix this problem.

• Access of BBM cannot BBM shop after update to Version BBM 10.5.13.14 since beta Zone

  Phone = Z10STL100-3

  BB10 = 10.2.1.3337

  After the update to BBM beta area to the last official version 10.5.13.14 I can't access BBM shop. The BBM app shows a screen with a blue header that says BBM Shop with a message in the center of the screen that says "cannot open BBM store" with a button "Try again" message below.

  Of course, I tried the button try again without success, I did the equivalent of a battery pull because I needed to pass an empty battery with a charged battery.

  At the suggestion of a friend BBM I had tried to change the time settings and time zone and tried to access the BBM shop and even tried after set time settings and TZ return to the original settings.

  I also tried a traction battery after a hold button close and still can't access BBM Shop.

  I understand there are very few others who have the same problem.

  Thank you for your help and wait until the full version is an OK option.

  10.6 just releaased and can now access the shop with her again

• No support .m2ts after update to version 9.0.2

  I've been using After Effects CS4 to work with my Canon HF10 .m2ts files without problems so far.  I just applied the last update, the version 9.0.2 and now I can no longer work with the .m2ts files.

  When I insert a project that uses .m2ts files, he treats the files as missing assets.  If I try to replace the images with another .m2ts file, an error window appears immediately when you select the file:

  After effects error: could not import the file "myfile.m2ts":

  type of file not supported or extension.

  ( 0 :: 1 )

  If I try to create a new project and import a new .m2ts file, I get the same error message.

  What happened to .m2ts support with this update?

  We have found the following case:

  http://blogs.Adobe.com/toddkopriva/2009/05/after_effects_902_update_red_r.html

  There is a known issue with a specific update scenario:

  If you have downloaded the trial after effects 9.0, and then updated to After Effects 9.0.1 and then activated the application with a serial number after purchasing a license (all in exactly in that order), then the After Effects 9.0.2 update will fail to update your content to third parties, such as the Cycore (CC) effect plug-ins. It seems that uninstalling the third-party content and then restarting the application will cause third party content updated to install correctly.

  If this does not work for you, please let us know on the forum users of After Effects, and we will try to help you through it. There is also contact information for Adobe Technical Support on the homepage of this forum, and you can get free assistance with many installation problems.

  See the after that Effects 9.0.2 Date of issue for other known issues.

  Under windows, you will have an entry in the panels of control/programs and features (at least on Vista, not sure the equivalent XP more). On mac, it will be in the applications/Utilities/Adobe installer.

  -chris

• MacBook Pro keeps freezing and timing after update to El Captain 10.11.15

  I have a MacBook Pro, which was previously executed on SCF 10.11.14 2013. I began to see problems before my laptop even turned on! When it is restarted after installation, I got about 60% of the way down the front loading apple bar it has completely stopped. I waited quite awhile (maybe 20 minutes) but no progress on the charge. I did a reboot hard twice before he finally finished (sidenote: both times I restarted, instead of starting at the beginning of the load bar as it should, the load bar would start in the place of 60% that he is stopped at the first time).

  It finally comes and I had to open iTunes, Photoshop and Safari so it was very laggy. After working on my laptop for five minutes, the song that I had started doing these breaks, and Photoshop as well froze upwards. I tried to go on Safari, and that's where the beachball replaced my mouse arrow. I tried to use my MB with the only window open (photoshop), but even force weren't no longer works. It just seems to be freezing for longer periods of time.

  I ended up doing a hard reboot once again and only with the help of Safari, but this does not work. Hard restart once again tried only using Photoshop and encountered the same problem. This last time, I have Photoshop open, but for some reason, the tools are not answer at all. For example, when you use the Paintbrush tool, you will see a circle in the placement of the classic mouse arrow when you are in the photoshop window. Well, the arrow of the mouse remained and everything I clicked on, as well as two fingers/output action zoom did nothing. Nothing does in Photoshop anyway.

  Could someone please, please help me? I'm a photographer and I have a project due to my clients in the morning, and I can't afford this issue right now. I write this on my MB Air, which runs on CBS 10.11.13. I'm afraid to try an install of update on this one!

  If nothing can help, can someone tell me how easy and on an empty stomach to downgrade to the previous version of El captain? Thanks a bunch!

  There is no easy way to downgrade. He must erase the drive and then reinstall OS X. First, you need a good backup. Or you can try the following:

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  Boot to HD recovery: restart the computer and after the buzzer, press on and press and hold the

  Command and R keys until that Menu Utility screen appears.

  3 repair the hard disk and permissions: restart the computer and after the buzzer, press on and hold down the command and R until the Menu Utility screen opens.

  When the Utility menu, select disk utility, and then press the continue button. After loading disk utility select it

  indented (in general, Macintosh HD) entry of the list to one side.  Click first aid button in the toolbar. Wait for the operation

  is over, then quit disk utility and return in the Utility Menu.

  4 download and install updated Combo OS X El Capitan 10.11.5.

  5 reinstalling OS x: reboot of HD recovery Select reinstall OS X in the Utility Menu and click on the continue button.

  [Exclusive to use the foregoing authorization to theratter by khati.]

• LaserJet M1132: LaserJet M1132 deleted and could not be installed after update latest version 10 of Windows!

  3 days ago 10 Windows installed in my computer suddenly updated. After the update and reboot my PC, Wndows 10 deleted my laserjet m1132 system completely! And now I can't install it again, cause Windows 10 says that my printer driver is 'suspect' and it will be disabled instalation! Auto-detection of the companions of the local HPSupport site do see no printer connected to my PC completely! And PC does not say that all the new devices were connected. WHAT SHOULD I DO?

  Hey @fliperUA,

  Welcome to the HP forums!

  I see that your Laserjet M1132 will not be installed on your PC Windows 10. I can help with that.

  To install the drivers, we will do the following:

  1. If you have the USB cable connecting the printer to your computer, then remove it.
  2. Uninstall all the software your system associated with the printer.
  3. Disable all firewalls, antivirus, ad-blockers and similar programs on your PC.
  4. Download the latest drivers for your printer by clicking on this link.
  5. If the installer asks you to insert the USB cable then plug the cable at the time.

  This should allow you to install the drivers for your printer. If it does not then please let me know what error messages you see now and I should be able to help more.

  I hope this helps and I hope you have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Problem blackBerry Contacts application launch Smartphones and tasks after update of the device on the air.

  Hello

  I have problem launching Contacts and applications Taksks on my BB Bold 9900 after OS updated on-air 7.1 Bundle 2508 (v7.1.0.912, platform 5.1.0.641).

  The Contacts app is crash after trying to launch it's and not display anything (previous armored content is displayed). I have to press to close the application and return to the screen notrmal.

  The tasks app isn't launched and display error message: Eception exception: context of entry has a component of input null - apparentely focusGained has not been called by UiEngine.

  It's not disappear, even I reboot the device, remove the battery or wipe it.

  Can someone help me?

  Kind regards
  Artyom.

  HM, if I try to start tasks app with English as the language of current entry - this app has started without problem. Current developments in Russian language - prevent to start this application. Also if I delete files from Russian support of device using desktop - contacts and tasks soft application works ok without problem. May there are Russian software bug in support files.

• Portege R600 - no noise and webcam after updating the Mesangere Live

  I just upgraded my Live Messenger to the latest version (version 14.0.8064.206) and I discovered my webcam and sound system are no longer recognized - I get the message "unable to run audio and video Setup."
  I came across the message that the Chicony webcam may not work under Vista, but that this had been set under Vista SP1, I installed it, so this seems to be a new problem associated with the latest version of Live Messenger.

  Someone else you have this problem? All solutions becomes apparent?

  Interestingly, the video and sound work fine in Skype.

  Hello!

  Try to update the driver for the webcam and sound like said Garrett. You can find updates on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  What happened if you install the older version of Live Messenger? It works with her webcam?

  Good bye