Configure administrator for unit accounts

Similar Questions

• How can I configure an existing for simply accounting file

  I have a file created in the accounting program, accounting simply.  When I try to open all the files, I have been informed that the files are incorrectly configured... What must I do to fix this?

  It is certainly a question for simply accounting support. It is not a product of Ms.

• I just changed the administrator to standar account now the Dungeon of computer on request for the password that I continue to put the one I use to have but nothing happens whats rong whit this

  Just change the administrator account for standar now the computer keep on asking the password I continue to put the one I use to have but nothing happen how to find the password, usted an i have I removed it now what?

  Hello

  see if that can help you with this status has changed for the account

  worth a try

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  http://support.Microsoft.com/kb/940765

• Profile of user runs as an administrator for the daily work and this account is corrupt and switch every time on a portable temporary file is opened (created)

  User profile runs as an administrator for the daily work and this account is corrupted and switch every time on my laptop, just open a temp file (created), I downloaded a driver to run my cell phone as a modem while he is on vacation. and the problem started after downloading this software,

  Hi johnnyroque

  Thanks for posting on Microsoft Answers.

  Try to use the following steps to enable the built-in Administrator account and further, then the steps and links to fix a corrupted profile.

  Please start on the mode of the Windows recovery environment (WINRE).

  -To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.
  -When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.
  -Select the language by default, click Next.
  -Select "repair your computer".
  http://www.Flickr.com/photos/freeed/363935713/in/set-72157594490796701/
  -Select command prompt, and then type the following commands:

  NET user administrator / Active: Yes
  NET user {user account name} {new user password}

  Note: Please enter the user name and the password without the braces of the flower.
  
  -Restart the computer normally.

  //////////////////////////////////////////////////////////////////////////////

  To fix a see corrupted profile link below:
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please post back and let us know if it helped to solve the problem - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A security reason to use the 'user account ' instead of the 'administrator' for your personal PC account?

  I need to perform regular tasks in week and maintenance tasks on the weekends, there is no problem if I login as administrator for the week and the weekend.

  If I create 2 accounts: user (weekdays) and Director (weekends), then I run in question switching between the 2 accounts.

  I would like to know what security advantage using user account during the week instead of the administrator account.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  I support of many PC, win7 & win8 they all default admin win and a second account with administrator privileges. By default, they all start on the win by default admin account.

  Touch wood I never had no problems, over several years, (some systems are used by children)

  One piece of malware in several years. No installed family safety, children have been educated.

  Some are enterprise systems running 24/7 as they treat the various procedures "out of hours".

• How to unlock the administrator for windows user account 8

  I am trying to download a program, and he says he has to be run by administrator.  My account is the only one who is entered into the computer, as I bought it just yesterday.  So, how to become the user administrator?

  Your user name is almost certainly already an administrator.

  Confirm it through accounts of Items\User control Panel\All Control Panel.

  Remember these tips.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right-clicking on the program real .exe, and then click the Compatibility tab.  Observe the area of privilege level down to the bottom.

• Administrator log - on: can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default

  Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges?  How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles?  Please write to * address email is removed from the privacy * for your answer.

  Steve

  Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges?  How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles?  Please write toEmail removed privacy for your answer.

  Steve

  Let me soce entry details:

  1. all computers need to have at least one administrator account. It will not work without it.
  It does NOT, however, create a profile For YOU defaultAdmin. It belongs to the user or the owner to create and decide who is Admin, and who is a regular user.
  2. even an admin account will not get to install and change the settings automatically. UAC (user account control) always appears to ask for confirmation of the task by clicking on continue, or by typing the admin password.
  3 be the main user is not to be an administrator. It is up to the user/owner of the computer to be configured as such.
  That said, now my question... How do you know that you're not an admin?

  t-4-2

• You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

  Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

  Karima,

  Applicable to Windows 7.

  The following steps require administrator credentials.

  • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
  • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

  Good luck.

  James

• Cannot save settings: unable to create a configuration file for the required configuration object

  When I try to open the application in the administrator account it say - could not save the settings: unable to create a configuration file for the required configuration object

  Thanks for the reply.i think that a virus changed I scan my computer and discovered C:\users\jason\AppData\local\temp\low\temporary internet files\content. IE5\TLIFXGRH\ why is Task Manager disabled people [1]

• How to reset the password for the system administrator for Time Capsule?

  I need to do a system restore to 2008 MacBook my wife of my 2014 Time Capsule, and I'm stuck at the system administrator password prompt. It does not accept the password to base such as revealed by the Airport utility station > base station > show passwords on my MBP, which is able to save and enter Time Machine, even if the TC is configured to use individual accounts rather than a single disk password. I'm nervous about any base station reset option in case I spoil my backup. How can I me?

  Although TC is configured to use individual accounts rather than a single disk password

  You must use the right of the user and the password in this case. NOT the password from the drive.

  I'm nervous about any base station reset option in case I spoil my backup. How can I me?

  Reset complete... It will not damage the backups somehow... It simply returns to the default values.

  Let me recommend to you if you want to continue using the TC in this way... (useless IMHO). Please do an export of the configuration before factory reset you.

  

  With the help of user and passwords in the TC is near useless. It only affects the side of the router...

  If you need more security using encrypted backups... but the reality is... the security more you add less useful the backup is likely to be. As you have now discovered... When you need it... you need as clear and clear as possible.

• Use the server to the account administrator or standard account?

  Having just bought a Mac Mini to use as a server at home for our Macs.  I'm not sure if the server program must be run in an Admin or a standard account.  Advice please.

  Roger

  Admin account.

  Create an account no separate administrator for your normal daily use.

  C.

• Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings.

  I had a few actual creation difficulty one Hotmail account for my daughter.  I'm using Windows (newer) 8.  I have created an account for it, but can't make it work.  Everytime I try to sign into his Hotmail I get the following error:

  "Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings.  Click "Access the parental control settings" to complete the process and access your account. »

     Needless to say I went to family safety settings on our PC and the Security Web site for the family repeatedly to change the settings that might seem to apply, but it has only settings web for her, no setting of Hotmail to update me at all.  Am I missing something, or is this a problem?

  I've seen one or two similar posts...

  Thank you

  David

  Hi BigDcdn,

  For us, in order to better afin de mieux aider help you with this issue, please send us screenshots of what follows:

  • List of child accounts on https://familysafety.microsoft.com
  • Settings for the computer of the child concerned on the site of the family safety (the page where it shows queries, e-mail notifications, etc.).
  • The list of the user accounts on your computer

  I have sent you a private message for instructions. After you download it, please let know us in this thread.

  Thank you.

  Okay, so I thought about it and it's ugly and not intuitive.

  The REAL CAUSE of the ROOT of this error is that you CANNOT add a new kid in the Family Safety (FSS) Web site.

  But as a solution, you can add a new kid on the Section of the Windows Phone website My family.

  FIRST STEP remove account the offending child of family on the site of the FSS under the management of the list of the members of the family section. Once this has been completed, follow the workaround below.

  WORKAROUND

  1. Then from the sign of site Web of Windows Phone with your Microsoft Account (MSA) (parent).
  2. Hover over your name just below upper right of the search box and you will get a context box.
  3. In the context box, select My Family.
  4. In the Section My family, you will have two lists. PARENTS and CHILDREN, and especially an ADD A KID to the right of the list headers.
  5. Click on the link. Now, you will get a login screen of the MSA.
  6. Register your child or have them enter login and password. They will appear as a kid under the section of your Windows Phone my family. Even if they do not have a phone you can add.
  7. Ask them to connect in hotmail\outlook.com with their MSA will complete the configuration of security for the family.

  REAL SOLUTION

  There must be a link on the site of the FSS for KID A ADD (add a child would be more enjoyable unless of course you are a family of goats) identical to that of the Windows Phone my family section. Seems like a logical place to have this option?

  I hope this helps anyone else having this problem.

• Delete user for unknown accounts profiles in XP Pro SP3

  I've got profiles user for unknown accounts in XP Pro SP3.  In the past, I've deleted then recreated with the same account name administrator accounts.  I have observed that no active administrator accounts have the same size and modification date user account unknown profile.  Can I safely delete the profiles of unknown account or delete profiles delete profiles of active account?

  Hello

  The unknown user account can be a corrupt user profile. As there is no data to this account, it is safe to remove it from your administrator account.

  To delete the user account, follow the steps from the link below:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/lsm_delete_user.mspx?mfr=true

• Cannot install windows live photo gallery, it says I have to sign as an administrator for the download to work

  Original title: Windows Live Photo Gallery problem

  I used to have Windows Live Photo Gallery on this computer and it was working fine.  For some reason, he took off.  I tried to download again and get a message that says I have to sign as an administrator for the download to work.  When I check my user account, it is said that I AM the administrator.

  What should do?  Thank you

  Try to create a new administrator account and see if you can install the program. If you can, your profile is corrupt.

  See the following link: http://support.microsoft.com/kb/811151

• I got my windows vista ultimate administrator standard user account.

  I got my windows vista ultimate administrator standard user account. Now whenever I try to update or install "User Account Control" is constantly asking me to (type an administrator password, and then click OK). The problem is that I can't do this because OK is disabled (grayed out) and no place to type the admin password or the other. How to restore this administrator account or even to enable the local administrator account by default here?

  Hello

  If you have another administrator user account on your computer then log in and change the account to standard user for the administrator account.   If not, then follow the steps from the link and check if that helps: how to use system restore to log on Windows 7 or Windows Vista when you lose access to an account http://support.microsoft.com/kb/940765/en-us