Configure AnyConnect (Mobile) on ASA5505
I found some tutorials and guides on how to Setup on an ASA5505 AnyConnect, but I wanted to check before to make sure I was going to the right direction.
Installation program:
I have a very simple installation and the basic objective. I have currently just a laptop on my ASA5505 E0/1 and then the ASA is configured with a static IP connected to the Internet. I have ASA correctly configured and you can browse the web through the laptop.
I also AnyConnect and AnyConnect Mobile licenses as well.
Objective:
I want to configure on the ASA5505 AnyConnect and simply to establish a successful connection to a device mobile android running AnyConnect necessary software on the market.
===========
There are plenty of guides for specifc set ups, but as described, I want to keep it is as simple as possible.
It would be a good guide to complete this?
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080972e4f.shtml
Also, I am more comfortable with the CLI. Is it easier to use the ASDM Assistant for this?
Thanks in advance.
Hello Joffroi,
Please check the question as answered so future users can learn from your own resolution
Kind regards
Julio
Tags: Cisco Security
Similar Questions
-
AnyConnect Mobile and Premium SSL free licenses
Hello
I currently have a pair of ASA5510 HA, if I understand the 2 free premium licenses can be used by the mobile client, as long as the ASA has the license for mobile clients?
Can someone confirm that my interpretation is correct, or I have to buy a separate license to the premium one long with the license mobile client to enable this feature?
Thanks for your time.
Hello
That's right! I did the same action on an ASA5505. In this case, you only need the anyconnect mobile license.
Please mark answered for useful messages.
-
Installing AnyConnect Mobile licenses
I want to clarify how exactly a Cisco AnyConnect Mobile license is applied to an ASA. Does as a PAK and then a license key is created? Y at - it a separate to enter specifically for the mobile command?
The mobile license was delivered as a PAK who was converted into a license key.
But today, you buy the mobile license more, instead you buy 4 AnyConnect more or APEX which includes the mobile service.
If you already have Essentials or premium, you can get the license migration until the end of the year.
-
Question about the license of Cisco's AnyConnect Mobile
Hello
I was reading on anycconnect, and I have a doubt,
Do I need Cisco AnyConnect mobile license if I establish a vpn with the ASA windows desktop using the anyconnect client?.
or these licenses are needed only when I use anyconnect on mobile platforms (iphone, ipad, Android)?
hope someone clarify this point for me,
Kind regards
Juan Pablo Hidalgo
It is useless to AnyConnect Mobile licenses for users who connect from a Windows desktop computer. These permits are only required for users with mobile platforms.
-
Disable/remove Anyconnect mobile on SAA license?
Hello
Recently installed the Anyconnect mobile license to allow users of iPhone/iPad to connect to our SSL VPN from Cisco ASA. However, we want to turn this feature off. Is it possible to remove or disable this license or may not allow users to connect successfully to our Cisco ASA Apple iOS environment?
BR!
Patrik
To remove the license, keep a copy of the current activation key you have. In this case, you want to reactivate the AnyConnect mobile license, then you can just reactivate using the current activation key.
To actually remove the license activation key AnyConnect, send an email to [email protected] / * /. Include a copy of 'see the version' and advise them that you want to get an activation without the AnyConnect Mobile license key. Once they provide you with the new activation key (which excludes the AnyConnect Mobile license), you can enter this new key on the SAA.
-
I'm trying to configure Anyconnect for the 1st time through the graphical interface, even if I'm comfortable with the command line if necessary. I am familiar with IOS and PIX before 8.3 so this is my 1st time with newer versions. My equipment is in a lab at the moment environment, but will be put into production soon. I get the following error when you try to establish an Anyconnect VPN connection with the local account on the ASA. Here is my config
ASA 1.0000 Version 2
!
hostname TOR1PLXSD01
activate sxZETAvnsVuPSnUc encrypted password
FomDbcd6ujnk.spR encrypted passwd
names of
!
interface GigabitEthernet0/0
Description management
Speed 1000
full duplex
nameif inside
security-level 100
IP 172.21.20.1 255.255.255.0 watch 172.21.20.2
!
interface GigabitEthernet0/1
Speed 1000
full duplex
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/1.20
Data Plexxus description
VLAN 20
nameif data
security-level 50
IP 172.16.18.1 255.255.255.0 watch 172.16.18.2
!
interface GigabitEthernet0/1.25
DMZ description
VLAN 25
nameif DMZ
security-level 25
no ip address
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
nameif outside
security-level 0
IP address XXX1 255.255.255.224 x.x.x.2
interface GigabitEthernet0/5
STATE/LAN failover Interface Description
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
boot system Disk0: / asa861-2-smp - k8.bin
passive FTP mode
DNS domain-lookup data
DNS server-group DefaultDNS
Server name 172.16.18.21
Server name 172.16.18.22
network of the OBJ_INSIDE object - HOSTS_172.21.20.0
172.21.20.0 subnet 255.255.255.0
network of the OBJ_DATA object - HOSTS_172.16.18.0
172.16.18.0 subnet 255.255.255.0
acl_outside list extended access permit icmp any one
acl_data list extended access permit icmp any one
acl_inside list extended access permit icmp any one
acl_dmz list extended access permit icmp any one
pager lines 24
Enable logging
Within 1500 MTU
data of MTU 1500
MTU 1500 DMZ
Outside 1500 MTU
management of MTU 1500
IP local pool vpn_pool1 172.16.22.5 - 172.16.22.250 mask 255.255.255.0
IP local pool vpn_pool2 172.16.23.5 - 172.16.23.250 mask 255.255.255.0
failover
primary failover lan unit
LAN failover failover GigabitEthernet0/5 interface
link failover failover GigabitEthernet0/5
failover interface ip Failover 4.4.4.1 255.255.255.0 ensures 4.4.4.2
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any privileged
ICMP allow all data
ICMP allow all DMZ
ICMP allow all outside
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
!
network of the OBJ_INSIDE object - HOSTS_172.21.20.0
NAT (inside, outside) dynamic 68.71.198.102
network of the OBJ_DATA object - HOSTS_172.16.18.0
NAT (data, Outside) 68.71.198.102 Dynamics
acl_inside access to the interface inside group
Access-group acl_data in the interface data
Access-group acl_dmz in DMZ interface
Access-group acl_outside in interface outside
Route outside 0.0.0.0 0.0.0.0 68.71.198.97 1
Route of data 172.16.5.0 255.255.255.0 172.16.18.3 1
Route data 172.16.10.0 255.255.255.0 172.16.18.3 1
Route of data 172.16.13.0 255.255.255.0 172.16.18.3 1
Route of data 172.16.14.0 255.255.255.0 172.16.18.3 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 172.21.20.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Telnet timeout 5
SSH 172.21.20.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
No vpn-addr-assign aaa
No dhcp vpn-addr-assign
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect essentials
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect enable
internal AnyConnectClientPolicy group strategy
attributes of Group Policy AnyConnectClientPolicy
WINS server no
value of 172.16.18.21 DNS server 172.16.18.22
client ssl-VPN-tunnel-Protocol ikev2
plexxus.ca value by default-field
the address value vpn_pool1 vpn_pool2 pools
dmradmin 1ZwOzoVS5TWIvR0h encrypted password username
type tunnel-group AnyConnectClientProfile remote access
attributes global-tunnel-group AnyConnectClientProfile
Group Policy - by default-AnyConnectClientPolicy
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:659360d147ccf882ab6cbb6e170ca8d2
: end
TOR1PLXSD01
ASA 1.0000 Version 2
!
hostname TOR1PLXSD01
activate sxZETAvnsVuPSnUc encrypted password
FomDbcd6ujnk.spR encrypted passwd
names of
!
interface GigabitEthernet0/0
Description management
Speed 1000
full duplex
nameif inside
security-level 100
IP 172.21.20.1 255.255.255.0 watch 172.21.20.2
!
interface GigabitEthernet0/1
Speed 1000
full duplex
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/1.20
Data Plexxus description
VLAN 20
nameif data
security-level 50
IP 172.16.18.1 255.255.255.0 watch 172.16.18.2
!
interface GigabitEthernet0/1.25
DMZ description
VLAN 25
nameif DMZ
security-level 25
no ip address
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
nameif outside
security-level 0
IP 68.71.198.100 255.255.255.224 watch 68.71.198.101
!
interface GigabitEthernet0/5
STATE/LAN failover Interface Description
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
boot system Disk0: / asa861-2-smp - k8.bin
passive FTP mode
DNS domain-lookup data
DNS server-group DefaultDNS
Server name 172.16.18.21
Server name 172.16.18.22
network of the OBJ_INSIDE object - HOSTS_172.21.20.0
172.21.20.0 subnet 255.255.255.0
network of the OBJ_DATA object - HOSTS_172.16.18.0
172.16.18.0 subnet 255.255.255.0
acl_outside list extended access permit icmp any one
acl_data list extended access permit icmp any one
acl_inside list extended access permit icmp any one
acl_dmz list extended access permit icmp any one
pager lines 24
Enable logging
Within 1500 MTU
data of MTU 1500
MTU 1500 DMZ
Outside 1500 MTU
management of MTU 1500
IP local pool vpn_pool1 172.16.22.5 - 172.16.22.250 mask 255.255.255.0
IP local pool vpn_pool2 172.16.23.5 - 172.16.23.250 mask 255.255.255.0
failover
primary failover lan unit
LAN failover failover GigabitEthernet0/5 interface
link failover failover GigabitEthernet0/5
failover interface ip Failover 4.4.4.1 255.255.255.0 ensures 4.4.4.2
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any privileged
ICMP allow all data
ICMP allow all DMZ
ICMP allow all outside
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
!
network of the OBJ_INSIDE object - HOSTS_172.21.20.0
NAT (inside, outside) dynamic 68.71.198.102
network of the OBJ_DATA object - HOSTS_172.16.18.0
NAT (data, Outside) 68.71.198.102 Dynamics
acl_inside access to the interface inside group
Access-group acl_data in the interface data
Access-group acl_dmz in DMZ interface
Access-group acl_outside in interface outside
Route outside 0.0.0.0 0.0.0.0 68.71.198.97 1
Route of data 172.16.5.0 255.255.255.0 172.16.18.3 1
Route data 172.16.10.0 255.255.255.0 172.16.18.3 1
Route of data 172.16.13.0 255.255.255.0 172.16.18.3 1
Route of data 172.16.14.0 255.255.255.0 172.16.18.3 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 172.21.20.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Telnet timeout 5
SSH 172.21.20.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
No vpn-addr-assign aaa
No dhcp vpn-addr-assign
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect essentials
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect enable
internal AnyConnectClientPolicy group strategy
attributes of Group Policy AnyConnectClientPolicy
WINS server no
value of 172.16.18.21 DNS server 172.16.18.22
client ssl-VPN-tunnel-Protocol ikev2
plexxus.ca value by default-field
the address value vpn_pool1 vpn_pool2 pools
dmradmin 1ZwOzoVS5TWIvR0h encrypted password username
type tunnel-group AnyConnectClientProfile remote access
attributes global-tunnel-group AnyConnectClientProfile
Group Policy - by default-AnyConnectClientPolicy
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:659360d147ccf882ab6cbb6e170ca8d2
: end
I'm glad to hear that you fixed
Please see this:
network of the VPN_POOL object
subnet 192.168.1.0 255.255.255.0--> adapt this to your real IP address range
!
the INTERNAL_NETWORKS_VPN object-group network
object-network 192.168.2.0 255.255.255.0---> that corresponds to the internal network, you want to achieve through the tunnel.
!
NAT (inside, outside) 1 static source INTERNAL_NETWORKS_VPN INTERNAL_NETWORKS_VPN static destination
VPN_POOL VPN_POOL-route search
It's pretty much the NAT exempt 8.3, 8.4, 8.6...
Additional information:
ASA Pre-8, 3 8.3 NAT configuration examples
Keep me posted.
Thank you.
Portu.
Please note all useful messages.
-
iPad, AnyConnect Mobile license question
Hello
I'll put up an ASA5505 allow a VPN with the certificate of the Client AnyConnect Secure Mobility Client (iPad)
However I get a message 'not of License"return of the ASA on the iPad - Anyconnect.
I remember reading that the ASA5505 came with two licenses. Or am I wrong?
Thank you for your help
Edward
No, the mobile AnyConnect license allow only ASA accept the SSL of the mobile client connection.
If you want to use the certificate as authentication, then you will need to purchase the certificate from a CA. OR, you can configure the ASA as the CA server and it can produce certificate for the client.
Alternatively, if you require a certificate, such as authentication, then CA certificate is not necessary at all.
-
AnyConnect mobile license, help
Hello
I'm a little lost with licensing
I have an ASA 5510, and I would like to be able to use mobile devices (Android/iOS) with anyconnect.
See below my "sh worm":
================================
Cisco Adaptive Security Appliance Version 8.2 software (1)
Version 6.4 Device Manager (9)
Updated Wednesday, 5 May 09 22:45 by manufacturers
System image file is "disk0: / asa821 - k8.bin.
The configuration file to the startup was "startup-config '.
api03 - in 29 days 4 hours
Material: ASA5510, 512 MB RAM, Pentium 4 Celeron 1600 MHz processor
Internal ATA Compact Flash, 256 MB
BIOS Flash M50FW080 @ 0xffe00000, 1024 KB
Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
Start firmware: CN1000-MC-BOOT - 2.00
SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04
0: Ext: Ethernet0/0: the address is 0022.90fe.14c4, irq 9
1: Ext: Ethernet0/1: the address is 0022.90fe.14c5, irq 9
2: Ext: Ethernet0/2: the address is 0022.90fe.14c6, irq 9
3: Ext: Ethernet0/3: the address is 0022.90fe.14c7, irq 9
4: Ext: Management0/0: the address is 0022.90fe.14c3, irq 11
5: Int: not used: irq 11
6: Int: not used: irq 5
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 50
Internal hosts: unlimited
Failover: disabled
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 0
GTP/GPRS: disabled
VPN SSL counterparts: 50
The VPN peers total: 250
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect for Linksys phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
This platform includes a basic license.
================================
My cisco contact told me: 'you must only ASA-AC-M-5510.
can anyone confirm? I would like to be sure before buy you.
Best regards
Nicolas
Yes, that is absolutely right.
Since you already have the AnyConnect Premium license for 50 users (SSL VPN peers: 50)
, then to connect mobile devices, all you need is the ASA-AC-M-5510.
-
Cisco Anyconnect mobile licenses
Hello
We need to buy 1200 anyconnect Apex licence, I read the ordering guide
for anyconnect but he's confused, I have to mention that we have 2 ASA 5545 - X in cluster mode,
I don't know how to order. It's the way that I think is true, but I'm not sure.
part number Qty
----------------------------------------------------------------------
L AC-APX-5 YR-G AC-APX-5 YR - 1 K - S 1
L AC-APX-5 YR-G AC-APX-5 YR-100 S 2
Thank you.
It would be OK for a 5 years AnyConnect Apex for 1,200 users license.
Note the Mobile feature is included with Apex or Base Anyconnect 4.x licenses.
-
Hello
I have 2 questions about the mobile Anyconnect license?
1. Why is there a mobile separate license for mobile devices for SSL VPN on an ASA firewall in addition to the regular essentials license, but when using the SSL VPN on the latest IOS routers, that a license is required? (I can connect to the IOS router with our mobile devices without error message)
2 is supported for setting up Cisco IOS ssl vpn on demand router? (Trying to implement access remote jabber)
1. it is a business of Cisco and just something we implementers should work with. For what it's worth, AnyConnect 4.0 is licensed differently and do not require a separate mobile license.
2. I don't know about that one.
-
Maybe that is not an existing function, but I imagine that there is a setting for that somewhere in all: config. I want pages on my mobile to open in default drive mode, so that the player display button is pushed to turn this mode off, rather than on.
I want to do this for two reasons: first, so that the pages will not load not all ads (I'm particularly concerned about video ads) that sap resources from my phone and increase my use of data; and second, so that pages that are not optimized for mobile devices (which is a pretty large majority of pages that I tend to visit) will open in a more readable format.
I'm on a stand with a pricing plan based on consumption for data, so I want to use as little data as possible when you're away WI - FI. How can I view default drive Firefox Android opens pages to?
Mode reader must download the entire page before being able to analyze. It does not reduce the bandwidth used. An extension like adblock or uBlock hangs the content before it is downloaded.
-
Bluetooth configuration between mobile phone and Tecra S3
Hello
Is it possible to have a Bluetooth between the toshiba tecra S3 and mobile sony ericsson W300i?
Thanks in advance for your response...
Kind regards
If both devices have BT, it is certainly possible. If you need assistance please write again.
-
Configuration AnyConnect helps Juniper SRX
Hello and thanks for reading.
This is a new Setup and I need support. I have not supported in TAC, but it has not proved effective.
Internet - > Cisco ASA-> Juniper SRX-> extreme L3 SW-> APC
What I've done so far is to install the latest images AnyConnect - anyconnect-macosx-i386 - 3.1.09013 - k9.pkg
and running asa916-6 - k8.bin
Please help with the Setup, with the IP space indicated, I have the last byte available for space public.184,.185, I drew the network in question. See photo.
On the certificate, you can browse to your ASA outside interface and, using your browser ability inspection certificate, download the certificate to your local host. You can then import this certificate in the trusted root certificate authority (CA) store (or the equivalent on the non-windows hosts) and it will be not reliable for future connections. This may or may not be feasible by the technical knowledge of end users. For this reason and others, most enterprise deployments choose to use a problems of certificate by an established CA.
For the issue of the domain, you must add your local domain if you / them to be added to the DNS suffix search list when a VPN connection is established.
-
After you have configured Anyconnect using the client of the wizard is unable to connect to Internet
Hello
I have a small Setup w/8.4 ASA - 5520. Outside goes to Internet, the inside is 172.17.0.0/16 network and management is 172.17.2.0/24. VPN IP pool is 172.17.8.0/24.
After that I configured webvpn with the wizard, I have VPN into a fine, ping other IP switches and routers (ASA is running EIGRP and distributing its static route to the internet to its neighbors). I have Setup nat to allow for Internet access from the inside to the outside, use off interface as the translated source.
After I VPN in, I am assigned a correct address for my pool VPN (172.17.8.21 for example). I can't ping or connect on the Internet however. Newspapers reveal nothing, I don't see any rejected packets. I can't reach the management either network. The management network is a switch that has all the ports of the management of the different switches, faders load, etc on this subject, but I can't access it.
I wonder what type of NAT configuration, I have to do here and how to I'm to deny access to the Web interface and management, but nothing appears in newspapers despite debugging setup and open the firewall until completely bringing all traffic.
The security level is 90 for the Interior and 0 to 100 outside management. The possibility of allowing equal security level interfaces pass traffic is selected. I got inside and the management to 100 before and it did not work with VPN.
Please help, I do not have my config ASA handy ATM, but I will by hand in a few hours.
I was wondering if anyone has recommendations on the use of NAT so I can get access, I need.
Thanks in advance
Patrick,
Do not have access to an ASA myself so the commands below are not soundproof.
But I guess if you're missing config NAT, it would be the document describing:
https://supportforums.Cisco.com/docs/doc-11640
To access the management, good show use some newspapers :-)
show xlate det | I have IP_ADD (for source and destination IP)
Show logg. I have IP_ADD (make sire logging is enabled for buffering on the level of information and to do for the source and destination)
Marcin
-
My client is eager to update the store on its Web site to a BandPage widget integrated page. There the 700px width value on their site, but when I copy and paste the code in Muse & publish, it displayed only as a narrow mobile version (link hidden sample: http://www.griffinanthony.com/storewidget). We contacted BandPage to make sure everything is set correctly at their end; They assured us that it is. We cannot figure out why it doesn't in Muse - should be as simple as many other widgets we places throughout its site?
Here is the generated code BandPage: < script src async = "/ /www.bandpage.com/extensionsdk" > < / script > < div class = "bp-extension' data-bandpage-bid ="453666329342337024"> < / div > " "
.. Set to a presentation of the grid (attach'd).
Any suggestion would be appreciated. THX!
FYI - I found a way around this by dragging the handles on the border of the code; He automatically jumped to the width that it was supposed to be (attach'd). Hope this trick helps others when they are faced with a similar dilemma.
Maybe you are looking for
-
Problems installing Satellite Pro 4600 wireless network card
I have a Satellite pro 4600 since 2002. I've never been checked his internal wireless network card. Today I'm trying to use it, but I am unable to even install it. 1) there is a little left switch of the laptop. I do it ON the switch but it didn't no
-
Swim with the sport of Apple Watch 38 mm
Hello Nice day. I bought a Apple Watch 38 mm sport. I want to know I can wear to swim in the pool? Pls answer me by e-mail. Kind regards. Edmond
-
How to install xp on a partition using cprompt, without using a floppy disk in windows 7
I want to install windows XP in one partition of my hard drive and I tried to install using windows XP CD whenever I get to the installation of windows environment a blue screen will come telling me that windows has stopped to prevent the HDD to harm
-
Impossible to update and use Dell V-313
Original title: USBScan problems I havea V-313 Dell all-in-one printer. I could not update via express update of microsoft because of a usbscan.exe file needed a windows x / p service pack 3 cd which I don't have.i not would be as an alternative to e
-
How to get Roxio Creator Business Edition for T60 with Win 7-64 bit
I have a T60 (8744-5BU) which came with Win XP Pro initially and has been upgraded to Win 7 Ultimate 64 bit. While under XP, I've made use of multimedia for offers to think: Sonic RecordNow Audio/data/copy and Drag2Disc. For Win 7, the only option