Configure the firewall to allow VPN connections to a remote site

Similar Questions

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• Since the upgrade to the latest version of firefox, I don't get the padlock when it is connected to a secure site. Is this normal?

  Since the upgrade to the latest version of firefox, I don't get the padlock when it is connected to a secure site. Is this normal?

  The lock has been replaced by the site identity button, for details on use, see https://support.mozilla.com/kb/Site+Identity+Button

  If you want to add a padlock icon in the address bar, you can use the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon/

• Configuration of the router to allow VPN traffic through

  I would like to ask for assistance with a specific configuration to allow VPN traffic through a router from 1721.

  The network configuration is the following:

  Internet - Cisco 1721 - Cisco PIX 506th - LAN

  Remote clients connect from the internet by using the Cisco VPN client. The 1721 should just pass the packets through to the PIX, which is 192.168.0.2. Inside of the interface of the router is 192.168.0.1.

  The pix was originally configured with a public ip address and has been tested to work well to authenticate VPN connections and passing traffic in the local network. Then, the external ip address was changed to 192.168.0.2 and the router behind.

  The 1721 is configured with an ADSL connection, with fall-over automatic for an asynchronous connection. This configuration does not work well, and in the local network, users have normal internet access. I added lists of access for udp, esp and the traffic of the ahp.

  Cisco VPN clients receive an error indicating that the remote control is not responding.

  I have attached the router for reference, and any help would be greatly apreciated.

  Manual.

  Brian

  For VPN clients reach the PIX to complete their VPN the PIX needs to an address that is accessible from the outside where the customers are. When the PIX was a public address was obviously easy for guests to reach the PIX. When you give the PIX one address private, then he must make a translation. And this becomes a problem if the translation is dynamic.

  You have provided a static translation that is what is needed. But you have restricted the TCP 3389. I don't know why you restricted it in this way. What is supposed to happen for ISAKMP and ESP, AHP traffic? How is it to be translated?

  If there is not a static translation for ISAKMP traffic, ESP and AHP so clients don't know how to reach the server. Which brings me to the question of what the address is configured in the client to the server?

  HTH

  Rick

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• Cannot configure the firewall using vSphere client (access to ESX 4i)

  I can't acess the firewall by using the client vSphere connection to a host of 4i ESX.  I select the host & gt; configuration & gt; Safety profile & gt; and it flashes firewall briefly, but then watch as services (two) (VMware vCenter Agent (arrested) and NTP daemon (started).

  Clues?  I restarted services (and the host itself).

  ESXi should be behind a firewall because there is no firewall integrated its own.

  If you find this or any other information useful or appropriate, please consider giving points.

• Is there a way we can configure the oracle database to accept connections from particular type. For example, we may limit Server Oracle don't not to accept applications for connection to the JDBC thin driver?

  I have an oracle server which is our recovery server disaster. When I switch my application of the primary site to secondary site, we have a window of downtime during which it must implement the secondary site. When setting up the application on the secondary site, I am getting below error please take note that primary and secondary are always synchronized. The application uses the thin driver JDBC to connect to the database.

  java.sql.SQLException: ORA-01017: invalid username/password; logon denied

  
  

  However when I use the same user name and password to connect to the SQLPLUS it connects successfully. When I use the sqldeveloper or any other jdbc connection, it fails with the above error.
  

  
  

  Can someone please advice what may be the setting on the oracle server that limits connections jdbc or any setting related to jdbc on the oracle client

  
  

  Concerning

  
  

  Pierrel
  

  Post edited by: user11093423

  For others this has been resolved with

  This is the setting in sqlnet.ora

  SQLNET. ALLOWED_LOGON_VERSION = 12

  later, commenting on the above setting and restart the listener. It worked.

  Thanks for all the answers

• VPN connects but no remote LAN access

  Hello

  I'll put up on a PIX 501 VPN remote access.

  When I try to connect via VPN software, I am able to connect but I am unable to access LAN resources.

  I have pasted below part of which seems relevant to my setup. I'm stuck on this issue, could someone help me? Thanks in advance.

  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  test.local domain name
  name 10.0.2.0 inside
  name 10.0.2.13 MSExchange-en
  2.2.2.2 the MSExchange-out name

  outside_access_in tcp allowed access list all gt 1023 host 2.2.2.2 eq smtp
  outside_access_in list access permit tcp any host 2.2.2.2 eq https
  outside_access_in list access permit tcp any host 2.2.2.2 eq www
  inside_outbound_nat0_acl 10.0.2.0 ip access list allow 255.255.255.0 192.168.235.0 255.255.255.192
  access-list 101 permit icmp any one

  3.3.3.3 exterior IP address 255.255.255.0
  IP address inside 10.0.2.254 255.255.255.0
  IP local pool vpn_pool 192.168.235.1 - 192.168.235.15
  IP local pool vpn_pool_2 192.168.235.16 - 192.168.235.40

  1 3.3.3.4 (outside) global
  NAT (inside) 0-list of access inside_outbound_nat0_acl
  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
  static (inside, outside) 2.2.2.2 10.0.2.13 netmask 255.255.255.255 1000 1000
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 3.3.3.1 1

  RADIUS Protocol RADIUS AAA server
  AAA-server RADIUS (inside) host 10.0.2.3 * timeout 10
  AAA-server local LOCAL Protocol

  Permitted connection ipsec sysopt
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto-map dynamic dynmap 10 game of transformation-ESP-3DES-MD5
  map outside_map 90-isakmp ipsec crypto dynamic dynmap
  card crypto outside_map the LOCAL RADIUS client authentication
  outside_map interface card crypto outside
  ISAKMP allows outside
  part of pre authentication ISAKMP policy 20
  ISAKMP policy 20 3des encryption
  ISAKMP policy 20 md5 hash
  20 2 ISAKMP policy group
  ISAKMP duration strategy of life 20 86400
  vpngroup signal address vpn_pool pool
  vpngroup dns-server 10.0.2.3 signal
  vpngroup default-field test.local signal
  vpngroup idle time 1800 signal
  vpngroup max-time 14400 signal
  signal vpngroup password *.
  vpngroup TF vpn_pool_2 address pool
  vpngroup dns-server 10.0.2.3 TF
  TF vpngroup default-domain test.local
  vpngroup TF 1800 idle time
  vpngroup max-time 14400 TF
  TF vpngroup password *.

  Kind regards

  Joana

  Very similar to the question of the configuration of the switch. You should check if there is no specific roads on the switch outside the default gateway. The switch should route the subnet pool ip to the firewall (10.0.2.254).

• Not able to connect to a remote site to the Windows XP computer.

  Original title: need help for the remote Office of information...

  .......... A storm disabled the remote site.  This site is now running, but my laptop refuses to connect to the remote site.  What should I do?

  Hi BarbaraAnnH,

  1. you receive any code or an error message when you try to connect to the remote site?

  2 are. what remote you referring?

  You can temporarily disable all security software and check if the problem persists.

  Note: Later, enable the security software after checking.

  Reference: Remote Desktop: frequently asked questions

  Hope the helps of information.

• Can not communicate with the server, BUT I CAN CONNECT SUCCESS TO "MANAGE SITES"

  I do NOT see the server in dw cs6 files, so I can't download or not communicate with the server, BUT I CAN CONNECT to SUCCESS OF "MANAGE SITES"... EH WELL THERE WHERE THE PROBLEM?

  

  

  In the view of the file context menu, click Remote Server

  

• VPN clients cannot access remote sites - PIX, routing problem?

  I have a problem with routing to remote from our company websites when users connect via their VPN client remotely (i.e. for home workers)

  Our headquarters contains a PIX 515E firewall. A number of remote sites to connect (via ADSL) to head office using IPSEC tunnels, ending the PIX.

  Behind the PIX is a router 7206 with connections to the seat of LANs and connections to a number of ISDN connected remote sites. The default route on 7206 points to the PIX from traffic firewall which sits to ADSL connected remote sites through the PIX. Internal traffic for LAN and ISDN connected sites is done via the 7206.

  Very good and works very well.

  When a user connects remotely using their VPN client (connection is interrupted on the PIX) so that they get an IP address from the pool configured on the PIX and they can access resources located on local networks to the office with no problems.

  However, the problem arises when a remote user wants access to a server located in one of the remote sites ADSL connected - it is impossible to access all these sites.

  On the remote site routers, I configured the access lists to allow access from the pool of IP addresses used by the PIX. But it made no difference. I think that the problem may be the routes configured on the PIX itself, but I don't know what is necessary to solve this problem.

  Does anyone have suggestions on what needs to be done to allow access to remote sites for users connected remotely via VPN?

  (Note: I suggested a workaround, users can use a server on LAN headquarters as a "jump point" to connect to remote servers from there)

  with pix v6, no traffic is allowed to redirect to the same interface.

  for example, a remote user initiates an rdp session for one of the barns adsl. PIX decrypts the packet coming from the external interface and looks at the destination. because the destination is one of adsl sites, pix will have to return traffic to the external interface. Unfortunately, pix v6.x has a limitation that would force the pix to drop the packet.

  with the v7, this restriction has been removed with the "same-security-traffic control intra-interface permits".

  http://www.Cisco.com/en/us/partner/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

• I need to connect my Captain el to my old station of Airport extreme use. I need to get the software to allow this connection

  I upgraded to El captain in my notebook.  Now my airport extreme base station did not get recognized for my connection to printers and the mini

  is there any software to install so I can get this laptop on the network?

  The software is available, but you need... or power borrow for 10-15 minutes... a former Mac running Leopard (10.5.x), Snow Leopard (10.6.x) or a PC with the utility AirPort 5.6.1 for Windows installed on the device.

  Sometimes users ask to see if the software is available from another source. Software not allowed is available on the Internet, but it is written by an 'unknown' author to Apple, which will provide no. help or support if you have problems with your Mac. In addition, the installation of the software without permission will require that you change (lower) some of the security settings by default on your Mac.

  Apple will not post the link to the software on this forum, even if you are willing to assume the risks of trying to use it.

• Configure the firewall on the esxi host 4

  Team Kia Ora

  I built an esxi host 4 on a piece of the material I had to hang around, as you do!

  I'm eager to open ports in firewall on the host.  I can't tick all the ports incoming and outgoing, I need tab of safety profile VC client (configuration of the host), and then select Properties.  Also the esxcfg-firewall command is missing, even when I use a UMA VMware to place orders RCI to the host, there doesn't seem to be available.   ?:|

  See attachment "... - nzwlg - stack - 1.png".

  On esx 3.5 or esx 4, I use the host configuration SecurityProfile tab, select Properties, click on the appropriate ports and in and facts. This feature seems to have moved/missing?

  Also, strangeness, is that I have another esxi installation 4 which has the parameters display correctly under the Securityh profile | Properties tab. ?  (attachment "... - nzwlg - pile2.png")

  Any help greatly appreciated and have a great week! =)

  ESXi have exhibited extensively in terms of services. All software tools to use must specifically support ESXi.

• How to configure the public ip address to connect to all computers

  Hi all!

  IAM using Internet broadband and in this regard, I want to use the internet connection in other systems also. So what I have to do here? should I buy router or switch will work to set this up?

  Concerning
  Fahad

  Hi Fahad Md,

  Thanks for posting this question in the Microsoft Community.

  If I understand correctly, you want to know how to share the internet connection.

  You can go through the steps in the article and check if it helps. Here is another article on internet sharing in Windows XP.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

• Configure the router for wifi mutiple connections

  I have a laptop connected to my wifi router which States (private network) and I want connect an extra, but my new laptop cannot see my network

  Hi glynjohn,

  ·         Which antivirus program is installed on the computer?

  Method 1: Check to see if the following is useful.

  How to set up a wireless network (WLAN) in your home

  Method 2: This article should provide you with the help you need.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2