Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.

Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.  I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor

Hello

HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.

This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1

If you can't make it work, you must decide between a new card or another router.

Personally, if it's new and I could return it, I'd get a different router model. But YMMV

------------

My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • How to configure the router Linksys DD - WRT for WVC54GCA E4200

    I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

    I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

    http://tzodns.com/support/tutorials/188

    http://tzodns.com/support/tutorials/190

    Hi Majekho,

    Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

    In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
    In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

    http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

  • Help to configure the router Cisco 1941

    Help!

    I just bought a router cisco 1941, I understand, it came with the Cisco CP, but I don't know how get you to the part where I can use it.

    Also, how can I connect to the router directly without using the HyperTerminal console, all I want to be able to do is configure the address IP of the ISP and my IP address so I can use it for surfing the internet.

    Help, please.

    Hello

    Thanks for the screenshots and show the output! You will need a few lines of command for CCP to work:

    Configure the terminal

    username username privilege 15 secret PASSWORD

    IP http server

    local IP authentication

    Sent by Cisco Support technique iPad App

  • Please help to configure the router for internet connection 871W!

    Hello world!

    I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

    I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

    ISP IP: 76.114.54.255

    SUBNET: 255.255.248.0

    GATEWAY: 76.114.48.1

    DHCP: 69.252.97.4

    DNS: 75.75.75.75

    75.75.76.76

    If you can, please help! Thank you!

    Hi david,

    Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

    you could ask your ISP to perform a reset/clear MAC add and try again?

    also, kindly post lastest "show run".

    Edit: just to see you've updated your screenshot. could you add command under 4

    Mac-add 0001.4af9.8b83

  • Cannot access Internet even if the router USB adapter Wireless G made the connection and

    Hello, I recently bought a Wireless-G USB Network Adapter with SpeedBooster model WUSB54GSC to go with my Wireless-G Broadband Router model WRT54G2 and I can't access the internet.  The laptop tells me I am connected and that force is Excellent, but when I open my browser, I can't access any site at all. When I try to add the laptop to my network magic on my computer, it tells me that it cannot connect with the laptop.  My Nintendo Wii and Itouch work perfectly with the router so I think it's my browser settings, but I can't understand it.  Thank you!

    Hey, thanks for trying to help out.  It turns out that my firewall did not allow the laptop to access the internet.  I made a few adjustments on my firewall settings and it all worked out great.

  • I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

    Connected to the new router, but locally only.

    Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
    BASICALLY,.

    I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

    I can connect if I use a cable, but its disadvantages.

    I can connect wirelessly with my PC and Ipad. and Internet access.

    I TRIED:
    Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

    Thank you in advance and we hope you can answer this soon!

    I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
    Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

    Hi Bryyaan11,

    You can check out the link to HP support and try to download the drivers for your wireless card updated:

    Support HP & drivers

    For more information, you can also consult the following article:

    Updated a hardware driver that is not working properly

    You can also check the following items and try the steps:

    Windows wireless and wired network connection problems

    Solve problems, find wireless networks

    Hope this information is useful.

  • How can I turn off the xbox 360 controller wireless for pc

    How can I turn off the xbox 360 controller wireless for pc

    Hello!

    I made a small application for this! It is called XboxExt (Manager of the Xbox 360 controller). There is no way to disable the controller in a failure to properly on PC. With the Games Games for Windows Live you can press the GUIDE button on your controller, and you can turn it off.
    So my app is doing the same thing, but not only with Games for Windows Live games. So you can use it anywhere, anytime.
    Best regards
    Parker
  • I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

    I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

    Check the liquid Indcator of Contact.

    Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

    Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

  • I have HP DV6-1256tx, I want driver for my laptop compatible with the next operating system Windows 8...

    Hello. I have HP DV6-1256tx, I want drivers for my laptop compatible with the next Windows 8 operating system. How to download, can somebody help me please...

    Give me the link or something where I can download the drivers...

    Thank you

    Edriss Dave

    HP does not currently have drivers for Windows 8. You probably won't need them. Windows 8 is not coming. It's here!

    Just do the installation on a spare hard drive and bring the original HARD drive to a safe place.

    . Windows 8 has drivers built in for most laptops and desktop computers. I did have to look for a driver in two facilities. One was an HP mini and the other was a Toshiba laptop.

  • What is the latest version of Firefox for my laptop from August 2011?

    I'm running Windows 8 (xp) and you plan to switch to Firefox. I would like to know what is the latest version of Firefox for my laptop?

    Do you mean IE8? Windows 8 was not released.

    You can use the latest version, Firefox 5.0.1. Look at the system requirements carefully to be sure that only what is necessary, especially the Pentium 4 processor and enough RAM since many XP systems came with only 256 MB. Right-click on the 'My Computer' icon on your desktop and select properties for the basic information about your system in the 'General tab '.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • All my coming on my site through my contact form is sent by the email I signed up for my account creative with cloud.  I want to send through my gmail account

    All my coming on my site through my contact form is sent by the email I signed up for my account creative with cloud.  I want to spend to send through my gmail account, how can I do this?  and no I'm not just talking specify how email is attached to the contact form, I don't know what e-mail is sent to the email specified in the contact form.

    I want that he sent to [email protected] and because my business catalyst account is set up with yahoo, he tries to transmit the request to the gmail via the yahoo email address and the email of yahoo always returns a mailer damon saying he could not send the message to the gmail account.  I want to jump the middlemen and just connect my gmail account.

    any help would be appreciated

    Login to your Admin site > Site Manager > system email > Set Default "From" E-mail > add the gmail account

    Thank you

    Sanjit

  • bought photoshop elements 11 year last for windows and use it in my office. The office is now crashed and not usable. So I bought iMac now. Is it possible to make the trade more to change the license in version iMac for a small fee. If not, can I partitio

    bought photoshop elements 11 year last for windows and use it in my office. The office is now crashed and not usable. So I bought iMac now. Is it possible to make the trade more to change the license in version iMac for a small fee. Otherwise, I can partition the hard drive in the iMac and install windows and also photoshop elements? What is the best alternative? Why?

    A license of Photoshop Elements is good for Mac and Windows, it should be just a matter of download the Mac version and using your serial number to activate it.

    PES 10: 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

    If you have any problem with the activation contact Adobe support using cat... Start here  If after selecting the relevant answers, you are unable to find a solution, choose "still need help? Contact us. "and the contact Chat option.

  • If my laptop came with Vista installed on it, but it crashed and I currently have installed linux, can I still switch to 7 for $30?

    If my laptop came with Vista installed on it, but it crashed and I currently have installed linux, can I still switch to 7 for $30?

    original title: moving from Linux to 7

    Hello

    Unfortunately, you cannot switch from Linux to windows operating system 7, but you can upgrade from Windows vista to Windows 7.

    Because you are unable to upgrade Linux, I suggest you perform a custom installation of Windows 7.

    http://Windows.Microsoft.com/en-us/Windows7/help/performing-custom-installation-Windows-7

    Also see the link below for more information on purchase or price details of Windows 7.

    http://www.microsoftstore.com/store/msstore/list/CATID.44066800/parentCategoryID.44066700/CategoryID.50726100

    Hope this information is useful.

  • have xp backup file of the old pc would like to put on new pc with vista, how can I do?

    have xp backup file of the old pc would like to put on new pc with vista, how can I do?

    Vista backup and restore tools are distinguished by the backup program provided with Windows XP and if the backup files would be incompatible.

    Perhaps you should look at is:

    http://Windows.Microsoft.com/en-us/Windows-Vista/demo-transferring-files-and-settings-from-another-computer
    You can transfer files and settings from one Windows computer to another by using a calledWindows Easy Transfer tool. To use this tool, your computer must be runningWindows 2000, Windows XP or Windows Vista, and your new computer must be Vista runningWindows.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

    I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

    I can't get a secure boot or anything. are there secret shortcut keys or anything like that? !! ??

    Dear klh76

    You need a USB FLASH DRIVE, you can transfer the files from the Recovery Console Windows Vista from any other pc or laptop running Windows Vista, go to the backup and restore on the other computer and click on create a drive recovery system on the file menu. Once done, insert the usb key into the laptop, you want to fix, start by using selected peripheral USB device as MBR, follow these steps on screen, you can repair a corrupt Windows Vista it or restore to a previous restore point.

Maybe you are looking for