Configure the satellite on picture Information mode

Similar Questions

• Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

  Hello

  I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

  Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

  My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

  Thanks for your help!

  p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

  I don't know where are these properties.

  Hello

  It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
  It could be that the button is not named as mine, but it must be identical.
  After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

  I think that you will make it, but I'd like some feedback from you.

  Welcome them

• Configure the email with incorrect information, please check.

  Original title: I recently bought a new computer with Windows 8, I've implemented with an incorrect email address!  Ho I change and stop getting invited to check the erroneous information that I have initially?

  I recently bought a new computer with Windows 8, I've implemented with an incorrect email address!  Ho I change and stop getting invited to check the erroneous information that I have initially?

  Hi Ian,

  Are you referring to Microsoft Account?

  If so, please try the steps below to change the main pseudonym of Microsoft Account.

  a. drag from the right edge of the screen, tap settings, and then tap Change PC settings.

  b. click/click on users on the left side.

  c. click/click on the link more online account settings at the top of the right side.

  d. If this computer or device is not a device of trust, then you will be asked to enter and submit a cryptogram sent to your phone or your secondary email address.

  in Internet Explorer or default web browser, click/click on the link Add or modify aliases under the pseudonyms of accounts.

  f. click / tap Rename under your (aka primary).

  g. click / tap on Rename Yes, my first alias.

  h. connect to your Microsoft account with your new email address and the password. You can close the web browser when you are finished.

  i. Select address (dot) use an existing as your primary alias email address, type in the email that you want to use and click / tap rename primary alias.

  j. check your email. You will receive a notification by e-mail to the youralternate email address in your profile Microsoft Account informing you that the change has taken place.

  k. click/click on OK.

  If the above steps fail, you can try to create a Local account and change it to Microsoft Account. After that, you can remove the Microsoft Account with incorrect e-mail address.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  To change an account Local to Microsoft Account, I suggest you try the following steps.

  a kick in the right edge of the screen, tap settings, and then tap Change PC settings.

  b in the left pane, tap or click on users.

  c tap or click switch to a Microsoft account and follow the instructions.

  See the article for more information.

  User accounts: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/user-accounts-frequently-asked-questions

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Cannot configure the fields to fill in Mode "to prepare the form." Please help :)

  Hello Adobe community.

  Here is a video link to explain my problem, there is also some text below explaining my problem too:

  Questions of implementation of the fields to fill in Adobe Acrobat.webm - Google Drive

  Last week I published a PDF file in Acrobat and added to fill fields... everything worked very well.

  This week, I'm doing the same thing.

  -J' open the PDF file in Adobe Acrobat (CC)

  -I'm going to "prepare the form."

  -J' I 'add a text field.

  * Now at this stage, everything worked fine. But now... I add the text field and I can't change it at all. I can't resize the text box, select it, nothing. I can even add a default in its properties, and nothing will be displayed. What is going on? I tried troubleshooting this online and I can't find an answer. In addition, I just did this last week, so I know it's possible lol.

  Any help would be greatly appreciated

  Levi Koenig

  It is a strange...

  First of all, thanks for the video, it's so much easier to understand what is happening when I see how things do not work.

  From what I see, I guess that it is something that is specific to this particular document. Have you tried to add form fields to a whole new document? You can do by ensuring that no other document is open in Acrobat, then Cmd-Shift-T to create a new document with a blank page in it. Now select Tools > prepared form - because this is a new document that was never recorded, Acrobat invites you to save it. Once registered, try to add a form field. It work? The form field is the way that you expect it to behave?

  If this isn't the case, then it is very likely that there is something wrong with the installation of Acrobat. The first thing I would try is to select help > check updates, make sure that you are running the latest version of Acrobat DC. If this does not help, I uninstall Acrobat and install again a new download. You can download Acrobat here: download Pro or Standard versions of Acrobat DC, XI or X

  If the problem is specific to your document, we will know why this is. It is possible that the document is corrupt. There are several ways you can try to recover from some alterations: the first thing I would try is to do a "save under" to save a new file name. Does it work or you get an error message? If you can save as a new file, the new file shows the same problems? If so, then try to extract just one page in a new document. To do this, open the thumbnail on the left, then select the page, right-click and select Extract page. This sill to create a new document with just one page in there, save it and try again.

  If you are still not able to add form fields that behave properly, it gets a bit more complex. How was the file created? Application used to create the original file and what application was used to save the file as a PDF file? Would you be able to share this file?

• Need some information on the Satellite A100-474 screen refresh rate

  Hello.
  Good time of day.

  I try install asp linux on my laptop. To configure X Windows I have to configure horizontal and vertical refresh of the screen (Toshiba TruBrite WXGA TFT).
  Any ideas how I can find these values?

  With respect and graditude, Raven.

  Hello

  Unfortunately, I found that the information the Satellite A100-474, which belongs to the PSAA9E series has been delivered with the 15.4 screen "and max. 1280 x 800 WXGA resolution.
  As far as I know it is developed by Samsung and it is a part number: LTN154X3-L06-H0A.

  Did you look in the user manual? I think that the manual provides some useful information under Schedule A; Technical characteristics.
  It should be for information about the video modes as the resolution of the CRT screen, color depth (bpp), and refresh rate (hz).

• How to configure the BIOS to boot USB on Satellite A50-110?

  Hello.
  I own a Toshiba Satellite A50-110 and I have a USB bootable Flash drive, but I don't know how to boot from the USB key.
  I guess I need to access and configure the BIOS. How can I do? Where can I get information on this subject? What are the steps to perform this task?

  TIA

  Hello

  As far as I know in the BIOS cannot be configured anything. As much as I now on this old notebook you can use just USB floppy for boot drive (U key at startup), but not the USB flash drive.

  Enter BIOS settings with the ESC key at first upward and check that all listed bootable devices.

• When you configure synchronization how sync manages information on two computers? It merges the information?

  When you configure synchronization how sync manages information on two computers? It merges the information?

  Hello!

  Yes, how Sync is that it brings together all the bookmarks and pushes them to all your devices. Same thing with the story.

  You will lose all the information in one of your computers.

• Satellite A200-08J: how to configure the command buttons

  I read many posts but nothing seems to make sense.

  Why Toshiba would put these buttons here if they are so difficult to configure? or not able to be configured?

  FYI same Windows Media Player does not meet any of them.

  I use Vista Business 32...

  I would like to configure all the 6 buttons next to the button On / Off (internet, media, play/pause, stop, previous/next.

  Thank you...

  Hello

  To my knowledge, not all keys are configurable. The buttons like pause, play, stop, etc. cannot be configured with different functions.
  It is not possible.

  But you can use the key Toshiba control utility to configure the buttons such as Internet and CD/DVD.
  You can find this tool in Toshiba Assist-> optimize

  There you can assign new applications to these buttons.

  By the way; Satellite A200-08J seems to be a model Canadian that is why it would be desirable and recommended to use the drivers & tools from the Canadian driver page.

  See you soon

• How to change the display in landscape mode on the Satellite

  Please help me!
  One day the Satellite screen strted in horizontal mode. No longer in vertical mode.
  What is whrong?
  How do they return to a vertical mode?
  Sorry fo my English!

  Thank you for an answer!

  Hello

  Something similar had happened on my desktop computer. I accidentally pressed the keys Ctrl + Shift + R key and the position of the screen has changed.

  I remember this option, you can use it on NVIDIA graphics cards. What laptop do you use?
  It would be very interesting to know what exactly your unit name.

  But as I said, try to use the combination of keys, or you can also try to change these settings in the advanced properties of graphics card

  Good luck

• Dual channel mode is not enabled on the Satellite P50T-B-10V

  Hello

  I recently bought a laptop by Satellite P50T-B-10V.

  Everything works fine, but I saw in the software helped that it s not activated for 1The memory channel mode, although the chipset support this mode.

  How can I solucionate what mind?

  + Memoria driver +.
  + Type Dual Channel (128-bit).
  + Modo Activo single channel (64-bit) +.

  I hope that your answers! Thank you!

  Dual channel mode can be activated manually.
  Mode dual channel will be activated and used automatically if all of the requirements be fulfilled.

  What does that mean?
  Well, to use the two channels, you need two memory modules and both modules need to support dual channel.

  The Satellite P50T-B-10V seems to be equipped with a module of 8 GB RAM
  http://www.Toshiba.PT/laptops/satellite/satellite-P50-b/satellite-P50-b-10V/

  This is why the double channel does not appear to be used.

• My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

  My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

  To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

  I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!

  Thanks, Ben

  OK, I found how to fix this problem.

  Go to this site download and buy the repair for Vista disc. Burn it to a disc.
  This link will guide you in burning instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  Start your computer with the disk and follow the instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

• I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?

  I have the 5.7 Lightroom version and download the new version of CC. When I open the CC version, in library mode, choose a picture and then go to the develop module, I get a screen empty blue with no photo. Why?

  Please try the steps mentioned in the Adobe Photoshop Lightroom help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  You can check 6 Lightroom displays a blank blue screen with an X through it in the module development for all the photos of my reference.

• Launch the app on iPad picture frame mode DPS?

  Hello

  Is it possible to launch my app DPS 'Picture Frame' mode on the iPad?

  Laughing out loud

  Neil

• trying to create an ESXi data store on the local drive.  Configuring the host error: unable to update the disk partition information

  I'm a newbie on ESXi and don't know what it takes to get ESXi correctly partition my drive SATA 500 correctly.

  I will implement a laboratory unit to carry out tests for ESXi and ESXi is not quite correctly the disk partitioning or do not see a good partition in order to create a data store.

  This system was able to correctly identify and configure a data store on a small 80 GB seagate SATA disk, however, this isn't quite enough storage so I swapped the hard drive and tried to re - install ESXi on the new hd.

  I use a USB boot ESXi since and it is launched and configures the card intel pro1000 pci ethernet correctly.  also correctly the id of the cpu and memory.  everything seems fine and he is even able to see the hard drive.

  Here are some screenshots of the process that I go through to make my data store...

  on this photo-sous the column titled 'available' is 'none', also said, under the title 'san identifier' he said 'not applicable' - I guess that's not quite right?

  

  

  

  

  and disappointment - failure?

  

  I tried to go into the bios if there are some settings I need to do to get this hard drive set up... I don't understand enough about ESXi to find out why the drive is not found and configured correctly.  is this a bios problem w / my system or a problem of ESXi?

  pls help!

  You have generally not, but it might be interesting to start with something like a Linux live CD and then using gparted or other to wipe all the top partition information.

• Satellite Pro L550-199: how to configure the touchpad + activate WLan in Win 8.1

  Hello

  I can't find any driver as Windows 8.1.
  Is not so bad, if I have an idea, how I can turn on and turn off the WLAN (FN + F8 key) module and how do I configure the touchpad.

  I would like to disable the click of the surface of the Panel.
  Click on should only be mouse button "" on the touchpad.

  Cheers, Mike

  Hello

  _Touchpad options: _
  Press Windows + X
  Then choose Control Panel. Then click on mouse.
  Here you change to the device settings tab
  Click on the settings button and you will get the settings of the Synaptics touchpad where you can change all the options.

  _WLan on / ignore
  Press Windows + C
  Charm bar click on laptop-> network settings