Configure Windows Update 51% do not turn off your computer.

Similar Questions

• My computer says updated configuration failure, recovery changes, do not turn off your computer... I left on three days and he said that

  My computer says updated configuration failure, recovery changes, do not turn off your computer... I left over three days, and he said that. Does anyone know how to get that back in Windows so I can use my computer. It is a laptop Windows 8.

  Do a Startup Repair:

  Auto repair - run in Windows 8 - Windows 8 Forums

  Let us know if it is not resolved

• Problem of multiple windows. Windows update 0% complete, "ready to set up Windows. "Please do not turn off your computer", etc.

  Hi all, I have recently experienced some of the problems reported here: - Windows update doesn't work (stuck at 0% for the hours) - Windows cannot stop ("preparing to set up Windows. Please don't turn off your computer") - MSE is out of date - I can't unzip files - some programs no longer work - I just can't stop some services (like Windows update). It times out. etc... I have Win7 X 64, and the last update that has worked with success has been about 3 weeks ago. Thanks for your help!

  Very well.

  Given that the 'MemTest... returned some mistakes,' contact the manufacturer for support under your warranty or Service contract. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Watch "updates were not correctly configured. Revertingchanges. Do not turn off your computer.

  When I turn on my laptop this message "updates were not correctly configured.  Restoration of the changes.  Don not turn off computer. "Have not been able to go beyond that?  Any help will be appreciated.

  Hello

   
  You have security software installed on the computer?
  
  I suggest you to try the steps in the following Microsoft article and check if this may help.
  
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/949358
   
  Hope the information is useful.

• Windows 7 - configuration constantly at startup 'do not turn off your computer, updates configuration"

  This is a computer that is less than four months old.  It works very well - install updates and shut down.  Now I get the same message, but it seems closed - the morning I get the message yet configuration and never completes the process.  What is the problem.  I called the store where I bought the computer and they tried to tell me to Geek Squad, it's something I have to pay for.  I got a service contract, but he says it's to my hard drive, or anyone, that it is not covered.  Is there a fix I can do myself.  From what I've read it's not like this is an unusual problem.  Is this correct?

  mlpotast,

  Although you will see a message at the top of the page that article applies to 'use a different edition of Windows than the one you', he applies to Windows 7, then download andSave the Fixit, please -How to reset the Windows Update components?

  Then, read How to configure Windows 7 to the clean boot.
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native Windows 7 firewall is now on.

  With the system connected to the internet, run MicrosoftFixit50202.msi and choose the default mode.
  Restart the system once the Fixit ended.

  Open Windows Update in Control Panel. Run a check for updates now.
  If the system can search for and detect the necessary updated now, Cancel the Clean boot steps and see if the system can search, detect, download and install the necessary updates now.

  MowGreen Services update - consumer safety

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

  Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

  When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

  I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

  It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

  Any solution please?

  Thank you

  Hello

  I'll get you the link and restore your computer to a previous working state.

  http://support.Microsoft.com/kb/949358/en-us

  Please reply with the status.

• Stuck on the screen "Please wait" or "Configuring windows. Do not turn off your computer.

  I'm under 64-bit Windows 8

  Apparently, I scanned my system with a complete analysis of the system (AVAST) and my computer left thinking that it would take several hours. When I came back, my computer automatically shut down because it was left idle for about 4 hours. I don't know if the scan is finished. When I try to start, the screen becomes screen stuck on "Please wait" or "windows setup. Do not turn off your computer.

  I already tried to go on the System Recovery Options screen, then will solve the problems, then Advanced Options, but I tried everything what it and the problem persists even when I tried to start in safe mode. I tried to go to the command prompt, and then type sfc / scannow, but he says he cannot parse now. I also tried chkdsk / R, but it said the same thing. I don't know how to run cmd as administrator from the System Recovery Options.

  So now I tried to use system restore, but I'm stuck on the logo of windows for about 1 and a half hour. I don't know if I have to wait for it or it is already blocked. In other forums I've read, they were using only the Group of drive 'C:' connected with system restore. Should I do this?

  I think to delete AVAST or turn it off somehow.

  Please help me.

  Problem solved

  I would like to share how I solved the problem. I was able to start using the windows 8 cd and in the window that asks you the language of the windows 8 needs to be installed, you can see below "computer repair".

  After clicking on it, it automatically prompts me for advanced boot parameters. First I tried the auto repair, but it says the same thing, '.. '. can't fix right now... »
  So I tried the option "pc refresh. I waited a few minutes to cool to do and after the process, it is more hung please wait screen when starting.

  Once connected, I installed programs have been removed. In the local disk files, there is a new "windows.old folder ' showing all programs that I have the old system. Re-install program is easy and the best thing is that I have my computer back.

  My deep gratitude to those who helped me. Thank you!

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• Cannot install windows update, error: configuration of updates. Step 3 of 3. 0% complete. Do not turn off your computer

  Original title: My laptop has frozen all by installing a Windows Vista Automatic Update

  My Samsung R70 was installing an update when it stuck on a screen saying, "Configuring Updates. Step 3 of 3. 0% complete. Do not turn off your computer. "After several hours, I turn off my laptop and since then I tried to open safe mode. I removed the battery and let the power drain before restarting and I also tried to startup, Samsung II of the recovery and restoration of the system repair. Nothing works! When I start I get the same "Configuring Updates" screen and I can't get in front of her.

  Someone at - it ideas? Thanks a lot in anticipation!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  Hope this information is useful.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• Default configuration Windows update restore changes do not turn off your computer.

  I'm running 64-bit Windows 8

  Guard saying default configuration of folds by using Windows Update

  Hi Cris,

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to start the computer successfully after following article provided above, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

  OT: Windows Update failure 8.

  I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

  Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

  Thank you!

  -me15prg9926

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• Default configuration updates window to update. returning from changes. do not turn off your computer

  I, too have this problem, however, it's on my new Lenovo Thinkpad 2 and the endless loop is going for 4 1/2 hours. I'm crazy! I only had it for 4 days. Can someone please help?

  Hello

  Welcome to the Microsoft community.

  I understand that you are unable to install the Windows updates and receive an error message.

  This must be due to the corrupted Windows Components update or conflict between third-party applications or external devices.

  I suggest you perform the steps below in the Microsoft Help article:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note:

  1. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  2. Please do not perform upgrade in-place or reinstalling Windows.

  3. after the boot minimum troubleshooting step, read the sections "How to reset the computer to start normally after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  Hope that it can solve the problem. If the problem persists, please answer us, we will be happy to help you.

  Thank you.

• Failure to configure Windows updates, changes to restore, do not turn off your computer.

  I had this problem for about 3 hours now.

  I have a laptop called Lenovo G580, before it all went past, he had to restart while I was navigating apps send me 14 minutes to prepare.

  And then it goes up to (15%)? Then gave me the problem "configuration of the windows updates failed, restore changes. Do not turn off your computer "

  It took a while, so I had to turn it off, but he returned to the screen, same problem all the time. It does change a bit.

  It restarted once but it comes back to the same problem

  I'm not sure what I can do, I just leave and wait until the early morning hours or y at - it a specific solution for this or anything like that?

  Help please!

  Start here: http://support.microsoft.com/kb/949358