configured printer / connection

I just bought a hp - Laserjet pro m1536dnf (HP) printer, that has no connectivity wireless.

Currently, I use a (WR) wireless router to access the internet at home.

Q1: Can I use a network cable to connect my printer the WR, without using the usb cable provided in the box to connect the printer directly to my laptop and print documents?

Assuming that the answer to Q1 is Yes, I want to better understand:

Q2: while the WR transmit internet (wireless) signal to my laptop, the WR will also transmit printer signal to my laptop? This is why I am able to print from my laptop without direct connection to usb cable from my laptop to the printer?

Hello

Connect the printer via a wired ethernet cable or wireless makes no difference.

As long as the computer and the printer connected to the same network (an any of them can be connected either wired or wireless) you can install the printer on the PC and enjoy its functionality.

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

    How to fix error code 105-100003

    I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

    Hi, Jimmy.

    Make the printer and model would be useful.  Thank you.

    Try the following:

    If your printer is connected via a wireless network:

    1. Make sure that your printer is turned on. (Start button / stop is turned on).
    2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
    3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
      • If the error ' printer does not "occurred while you have been setting up the printer:
        1. Open Software Center.
        2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
        3. Follow the on-screen instructions to set up the printer.
        4. Try to use the printer again.
      • If the error occurred after you completed the roll-out of your printer from Home Center Software:
        1. Make sure that the print queue is online.
        2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
        3. Click on your printer.
        4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
        5. Try to use the printer again.

    If the error persists:

    1. Remove the printer from your computer.

      1. Select start > settings > printers and faxes.
      2. Right click on your printer, then click on remove.
    2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
      1. Select start > Control Panel.
      2. Double-click user accounts.
      3. Click turn user account control on or turn it off.
      4. Select the check box use user account control.
      5. Click OK.
    3. Configure the printer again.
      1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
      2. Follow the on-screen instructions to set up your printer.
    4. Try to use the printer again.

    If the error persists:

    1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.

      1. Select start > run.
      2. Type services.msc in the box, and then click OK.
      3. Locate and right click on the Hello Service and select Properties.
      4. Since the "Startup type:" drop-down list, select Disable.
      5. Click OK.
      6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
    2. If you configure your printer, run the KODAK printer setup utility.
      1. Select start > programs > Kodak > KODAK Printer Setup Utility.
      2. Follow the on-screen instructions to set up your printer.
    3. Select the Hello Service.
      1. Select start > run.
      2. Type services.msc in the box, and then click OK.
      3. Locate and right click on the Hello Service and select Properties.
      4. Since the "Startup type:" drop-down list, select automatic.
      5. Click OK.
    4. Try printing from the center of renovation again.

    If the error persists:

    1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.

    NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
  • Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
  • Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.
  • NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

    If the error persists, contact us.

    http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

  • I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

    I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

    Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

  • Aspire One D255E don't look for a printer connected to the USB port

    My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

    It should be.  Try these steps and results reports:

    When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

    If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

    If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

    If you still have problems after return the exact error with photos if possible.

  • Shows printer connected locally as offline on Windows 7

    Hello.

    I downloaded the latest drivers and tried all the usb ports on my laptop. However, the printer can not connect and does not 'online '. The USB ports are all working well.
    How can I change from 'online' to the ' offline '?
    It will be a case of the cable being spoilt?
    Yours sincerely,
     
     
    Original title: Canon MP 496 'offline '.
    Hello
     
    Thanks for posting your query in Microsoft Community.
     
    You may experience an error in offline mode, if you have activated the offline of your network printer. More recent printers come with a built-in button that activates the offline mode. If you have pressed this button, you printer goes offline. You can also face a printer offline error, if you do not connect the printer correctly. If you must check whether the cables and connectors you used to connect to the printer are firmly in place.
    In order to understand the question, better we need additional information:
    Last changes made on the computer prior to the question?
    You can see the following and check:
    Hope this information helps. Please reply with the status so that we can help you.
  • HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

    My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

    I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

    It will then not connect.

    Print the summary I have says that it passes all except:

    No filtering = Fail

    Connected = do not run

    Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

    Other networks detected matching your network name (SSID) = No.

    Summary says:

    Network Name (SSID) altnet (correct)

    Address IP = not applicable

    Configuration source = not applicable

    Communication mode = Infrastructure

    Authentication type = open system

    = 64-bit WEP encryption

    I have NOT activated the mac address filtering

    Any ideas?

    Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

    We will do three things:

    1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

    2 reset the default settings on your printer network (configuration > network area).

    3. attach to the router in this way:

    Sometimes the DSL providers have more control over the router like the printer.

    -Unplug the phone line from the router
    -Cut the power to the router, wait 30 seconds, then turn on the power.
    -Go through the normal process of the printer connected to the device (wireless configuration wizard)
    -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
    -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Let the white gateway and DNS
    -Finally, connect the telephone line, restart the router and the test.

  • Laptop computer connecting to the printer connected to the Airport Extreme

    I will soon buy a MacBook Pro laptop and I'm interested in the way in which I connect to the printer connected to my iMac through my Airport Extreme.

    Unfortunately, you don't specify how the printer is connected to the iMac, but let's guess that's via USB.

    On your iMac...

    Open the preferences system (gear on the dock icon)

    Open the share

    Enter a check mark in the box next to printer sharing

    Close the window

    Now, do the same for the MacBook Pro

    Then, open Preferences system again on the MacBook Pro

    Click on printers and Scanners

    Click the + to add the printer to the MacBook Pro

  • want to 5540: can I leave my printer connected 24-7? Does go in mode "sleep"? I print every day!

    Can I leave my printer connected 24-7?  Does go to sleep mode?  I do not see every day or week necessarily!

    According to the manual (HP Envy 5540 all in a manual series) on page 22, it goes into powersave mode after 5 minutes of inactivity. You can change this time in the control panel if you wish.

    After 2 hours of inactivity, the printer will automatically turn off, and you have to press the power button to restart. This auto off function is not active if the printer has wireless or WiFi Direct features turned on. Or if she has a fax, Ethernet, or USB connection. This info can be found on page 23 of the manual linked to the previous paragraph.

    -dave

  • Tecra A8: Problem with the USB printer connected to the Port Replicator III

    Hi all

    I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

    I called the technical support of my country, but her is not recorded similar problems.

    A person with similar problem? Some help would be very appreciated.

    Thanks in advance.

    Hello

    Seems like a strange question... Already done the standard procedure in the event of such errors? :)

    The standard procedure is somehow similar to the following:

    -Update your BIOS
    -Update all the drivers for your machine
    -Update your printer drivers
    -Update your operating system

    If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

    Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

    I'd be happy to hear feedback from you on your situation...

    Welcome them

  • OfficeJet Pro 8600 Wireless Configuration - print is in the queue, then disappears. Do not print

    I just got the Officejet Pro 8600 as a gift and burden of implementing software and it on my wireless network.  When I try to print an e-mail or a coupon, the command changes to the printer and indicates in the queue. Then after a few seconds, the print queue (work) disappears without printing the document.  This command goes to the HP ePrint feature or the Officejet Pro 8600 network?  It shows the HP ePrint as being on USB.

    I have run all the Diagnostics, downloaded all the new software, software packages and updates.  I spend several hours trying to get to the printer.

    Thanks for any help you can provide.

    Hi @bksechols

    Welcome to the Forums of HP's Support.  I understand that when you send a print job to your printer Officejet 8600 to printing to the queue, then disappears without the printing of the print job.

    To help you, you please provide additional information?

    I look forward to hear from you.

  • Add on your HP printer connected account failed

    I had to send my first HP printer rear print quality was defective.

    So, I get a new printer and have not been able to set up properly.  Sometimes, he says that it is offline, but very clearly.  I deleted all the software and tried to reinstall, who got running initially.  Today, he said that he had no connection with my computer.  Yet once you remove all the software to try sorting.  It gets to a certain point and then said

    Add on your HP printer connected account... successful

    When I implemented the second printer in the fact that I tried to put the address printers, but he said he was already in use.  I think it is all confused...

    Help, please...

    If you talk about your account (email address) ePrint, you can not use it again that it is already used.  You must start over and get a new address of email ePrint.

  • problem the printer connection

    After having my computer reinstalled, I can't have my printer photosmart work 6510
    I don't really know to much about computers. can you please help...
    Thank you peter West

    Hi Peter,.

    I understand that you are facing difficulty to the printer connected to the computer.

    1. what operating system you are using on your computer?
    2. do you get an error message when you connect the printer to the computer?

    3 do you have the printer installation problems or you have problems printing?

    I suggest refer you to the article following if you have problems installing the printer.

    (choose the right operating system)

    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=81984&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5058336

    I suggest refer you to the following articles, if you have a problem with printing and check if it helps.

    Solve printer problems


    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    You can check the items below that explain how to install a printer in Windows 7.

    Install a printer


    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    Find and install printer drivers


    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    Let us know if the steps provided above helped to solve the problem. If you still experience the problem, answer and we are here to help further

  • printer connects to the computer, but the two are connected to a wi - fi connection

    Printer connected to wi - fi and laptop works fine, but when I try to install the printer to computer keep getting installation failed

    Hello

    1 have had any changes made on the computer before the show?

    2. do you get an error message? If Yes, what is the full and exact error message?

    3. what operating system is installed on the computer?

    Method 1:

    Check the link and try to run the troubleshooter to check if it helps.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    Check the link and see if it helps:

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    If the problem is not resolved, please provide more information to help you best.

  • When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

    original title: WiFi

    I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

    Hi AshleyHenley,

    1. Did you the latest changes on the computer?
    2. When was the last time it was working fine?
    3. You have security software installed on the computer?

    See the article and run the Fixit tool available, check if it helps.

    Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

    http://support.Microsoft.com/kb/871122

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702

  • How to share printer connected to the Windows XP with Windows 7 computer

    Original title: printer problem

    I have a HP USB printer connected to a PC running XP.  My wife has a laptop and connects to my Internet connection through a router.  Is there a command in XP that will access the printer even though it is not wireless?  The laptop is running Windows 7 and using Microsoft Home and Business 2010, and therefore the PC.   I was told that it is a command, but can't find it.

    Hi BudRamey,
     
    Share the printer from Windows XP for use with Windows 7 as well.
     
    See this link for more information on this operation:
     
    Additional reference on:
     
    Once you share the printer from the computer Windows XP, select the wizard file sharing and printers in Windows 7 as well.
     
    Refer to the section "to turn on network discovery, file and sharing, printers and files public sharing under Windows 7" from the link given below to do the same thing.
     

Maybe you are looking for