Configuring the additional server ports

Hi, if I use 2 ports per chassis of the server and want to add another 2, in addition to plug the cables and the settings, on the interconnection ports to "Set up as a Server Port" y at - it something else which is necessary and there is no interruption of traffic?

Hello David,.

If the links between IOM and FI server ports are individual links, then you will recognize the chassis to initialize the new links. This will cause disturbances of the network for a few seconds.

There is no need to re - recognize the chassis if there is a channel of port of fabric between the IOM and FI.

http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html#concept_5D3D88341BFB43468B62B5A77876C67B

HTH

Padma

Tags: Cisco DataCenter

Similar Questions

  • Can not activate sharing / "unable to configure the workstation server.

    Everything was going well until I made the mistake of upgrading to 12.1.1 build-3770994 12.0 (?)

    For some reason any sharing became disabled after upgrade.

    I can't activate the sharing, I get "unable to configure the workstation server.

    Seems every time I've upgraded to VMWare Workstation, something breaks

    I had to moce the VMs shared virtual machines 'normal' so I could run them.

    I fixed it, uninstalled and reinstalled and still the same failure.

    I took a look at the downloaded files and datastores.xml is empty, which is a little weird.

    Hostd.log, he crashed during the analysis of the datastores.xml file:

    2016-05-26 T 10: 11:07.572 - 07:00 verbose spend [08848] [sub Originator@6876 = Hostsvc] StorageNativeProvider: inventory filepath is C:\ProgramData\VMware\hostd\datastores.xml

    2016-05-26 T 10: 11:07.573 - 07:00 panic pass [08848] [Originator@6876 sub = default] error: class Vmacore::Xml:XMLParseException(not_well-formed_(invalid_token))

    2016-05-26 T 10: 11:07.580 - 07:00 panic pass [08848] [sub Originator@6876 = Default] backtrace:

    You may try to remove the config files during uninstall Workstation, and then reinstall the workstation.

  • How to configure the print server on multiple machines?

    Hello

    Can you get it someone please let me know the installation process of print server on multiple machines?
    That's what I thought.
    1. install Ghostscript on all machines.
    2 configure the print server on all machines.
    3. I guess I should point the IP address somewhere as a final step?

    Thanks in advance
    PM

    The steps you mentioned is correct.

    When you configure the print service, you can set the URL of the web application server financial information in .properties and this file will get stored in the HSS registry (this is the step where you run the FRprintserversetup.cmd). So when you run Setup of each print server there will be created for this purpose in the HSS registry entries. Then, there will be an internal logic that will work on what server should take what process.

    THX

  • How to configure the SMTP server for the osb 10.3.1

    Hi all

    Anyone can share information on how to configure the SMTP server for the osb 10.3.1
    and then how to send an email to OSB 10.3.1

    Thanks in advance!

    See this url:
    https://blogs.Oracle.com/christomkins/entry/sending_an_email_from_oracle_s

  • Print file .rep directly on the printer, configure the application server

    Hello

    I spent several hours on this forum and unfortunately not found a solution yet so hoping someone has an idea that can help me solve this problem.

    Using forms/States of oracle 11g with a linux application server, we develop on windows machines. Printing reports using compiled .rep files.

    We have a network printer sharing (HP) that is configured on the application server, and we can print on the correct printer directly on the application server.

    Problem is when I try to print a report when executing the forms of oracle on my machine of development directly to the printer.

    I tried:

    SET_REPORT_OBJECT_PROPERTY (l_repid, report_destype, printer);

    SET_REPORT_OBJECT_PROPERTY (l_repid, report_desname, 'APPSERVER_PRINTER_NAME');

    When I put the report_desformat in 'pdf' format I can see the reports to enter the print queue, but they do not reach a 'State' order ' print file empty. "

    When I remove report_desformat, he sends in eps and as I understand it, it prints, but with bad formatting (I work remotely and run by what their colleagues say.)

    CUPS 1.4.2 reference printer queue tab.

    The report generates in the browser if I change the destype to produce and use web_show_document to display it as we usually do.


    I understand there are solutions using a java bean or involving the installation of the software on the client computer, but my employer is unwilling to go to that direction. We have only a handful of reports that require the ability to print directly to the printer.


    That someone has an idea of what the problem might be or help provide additional steps, I can take to solve problems? I have no idea how to do to configure printers, our IT Department managed this and they say, it's good so I don't know if there is a problem with what I'm doing or there was something installation related rate with this network printer.


    Thanks in advanced for any assistance!

    I have given up trying to use a report_desformat of pdf and paste it with the default value of the eps, after review, it seems pretty close match that generates pdf format and despite the fact that the queue on the application server throws a misprint even with the eps format it actually always draws for the good enough for now. Would be nice to know what happened here, but the problem has been resolved.

  • Configure the remote server and test

    I installed Dreamweaver CS 6 and 10 CF and MS SQL server on the same computer.

    I use Dreamweaver CS 6 to create a test web site and to set up the remote and testing server.

    Dreamweaver invite me to enter the host name and the full directory.

    I would like to know what I need to enter information?

    hostname is localhost?

    complete diretory will C:\inetpub\wwwroot or C:\ColdFusion10\cfusion\wwwroot?

    Your information and your help is much appreciated,

    Kind regards

    iccsi,

    Iccsi,

    Yes. Host name to the title of "Test Server" is the hostname of the server test - in your case, since you're using CF, it must be the path in which CF works. It will be localhost:8888 or something similar - depending on what port you have configured for the webroot when installing CF. you could check in CF dashboard. Or, you could start CF server, open your browser, enter localhost. If the loading of the page Web of the CF by default, it's just localhost. If this isn't the case, add the port number.

    The remote server is your real Web server. It may be http://www.somesite.com or if you run it in a separate folder within your main site, it will be http://www.somesite.com/test - depends on you want to download the files of remote work.

    The complete directory under local configuration is the place where your files are located on your local system. Still, if you use CF, you can thus use CF webroot to create / store files - this way, you don't have to make copies of files in 2 places since that you configure the same folder as your test server too.

    -ST

  • Configuring the ACS server on windows server

    Hello

    I started to prepare my CCNA security and tried to configure AAA using ACS 4.2 on windows server 2003.

    I have configured the router to use the AAA authentication with the laboratory of cbtnuggets from ACS server.

    I checked the accessibility of the ACS server to client router and vice versa and also configuration.

    The problem is I'm not able to authenticate using ACS server, the router uses local authentication and I have no why the router communicates not eith ACS server.

    Help PLZ.

    Configuration of my router from AAA.

    ===============================================

    AAA new-model
    !
    !
    AAA authentication login default group Ganymede + local
    exact AAA authentication login group Ganymede + local
    AAA authorization exec default local

    RADIUS-server host 192.168.1.25 single-connection key ciscoacs--> (192.168.1.25 ACS, the key configured on the ACS server server is also ciscoacs)

    line vty 0 4
    exact connection authentication

    ================================================

    I created a user on ACS server and I believe that when I'm trying to telnet to the router I should use the user name and password configured on the ACS server.

    When I try to use, authentication fails, and also if the router accepts locallly configured user details then I think there was no communication between the router and the other GANYMEDE ACS server + will be used for authentication and if no communication between the router and acs server then only it should be the responsibility of local user

    Please help me.

    reports and activity--> passed authentication

    reports and activity--> failed attempts

    Rating of useful answers is more useful to say "thank you".

  • Configure the application server after you change the database

    Dear all,

    We use ORACLE EBS R.12.1.2. Database: 11.1.0.7. 2 RedHat linux servers.

    We are validating failover scenarios keep oracle database data.

    Scenarios is that; We fail on the primary database and primary database role has opted for sleep.

    Should what changes we make on the Application Server?

    Should we change configuration of application server to connect to the new database (name, address of db server... etc). and how?

    Thanks in advance,

    Shareef

    PL see Section 6 in MOS Doc 1545920.1

  • Translation in MAX problem when you configure the SSH server on a cRIO-9068

    Hello

    In my view, that there is a problem with the German translation of the remote switches max on the new cRIO-9068. When you look at the English Version, you see "Enable Secure Shell Server". In the German Version, you see "Secure Shell Server deaktivieren" which meens to disable the SSH server. The box did the same features, so after you disable SSH in can access. This it seems that it is probably just a translation problem.

    I have attached two screenshots.

    Andreas

    Thank you Andreas.

    This has already been supported in Nov 2013 and should be fixed soon.

    Marco Brauner NIG.

  • Configure the FTP server using the command line

    After IIS FTP server on Vista (or XP) starts the "default FTP Site" has only "read permissions".
    How can I set the FTP server to the CONTROL LINE HELP, to allow 'write' also.

    I believe that access is denied is possible if,
    the law is already assigned has.)
    you do not have administrator rights (b.)

    Anyway, you can avoid the prompt (Y/N) by the presence of echo on the batch file
    echo y | Cacls filename /g username :permission

    Refer to Microsoft KB on How to Use CACLS.EXE in a Batch File .

    -----------------------------------------------------
    Remember to Vote as helpful for others and accept the the proposed Answer if it is relevant to build KB in this Forum.

  • Cannot configure the tomcat server instance

    For tomcat when I set up the parameters of jmx in hyperic I get the message below.  When I check via jConsole there is no java.lang.OpenFileDescriptorCount.
    How can I fix it, and why it stops the server to save the configuration and for allowing me to see what values are stats that exist?

    The configuration has not been set for this resource due to: invalid configuration: error recovery value: attribute not found [java.lang:type = OperatingSystem:OpenFileDescriptorCount]: javax.management.AttributeNotFoundException: no attribute: OpenFileDescriptorCount

    Hello

    This is caused by the metric "Open File Descriptor Count" is enabled by default.  You can disable this metric via Administration-> follow-up by default is-> Apache Tomcat and by placing a check mark in 'Open File Descriptor Count', then clicking on disable Collection.  This setting is disabled by default because it is not always available.

    You cannot save configuration because there is an error when checking and so the configuration is considered valid.

  • Configure the web server and application server deployment hangs in 11.1.2.2

    Hi all

    I want to install Hyperion 11.1.2.2 with Oracle 11.2.0.1 database. I installed all the modules successfully.

    At configuration time, I set up the Foundation Hyperion Essbase, planning and reporting with success.

    But the question, when try to configure HFM and FDM EMP Configurator crashes, in HFM Web server configuration and application Web of FDM configure FDM.

    I installed IIS, Oracle 32-bit and 64-bit, the Clients, and also configured DCOM.

    What comments can you do on this point, if any body faced the same question.

    See you soon,.

    Mady

    Hi all

    We reinstalled hyperion again

    then it works fine.

    Kind regards

    Mady

  • to connect to the management server port is bad, always. Why?

    I do not understand why it is still wrong, I reinstalled everything, the VC also, SSO fixed.

    always the same question.

    Serengeti > Connect - host BigDataMGMT.lab.ts.com:8080

    The port is incorrect.

    Serengeti >

    Why?

    In earlier versions of Serengeti and data Extensions silly the correct port is 8080.  With BDE 1.0 and later versions, the correct port is 8443

  • Configure the SMTP server in Essbase 11.1.2.1 for financial planning

    Hello

    While reports EN planning, I need to send mail to the State. But I am not able to add the SMTP in frconfig.cmd MBeans as accessible option in writing is "false". Tried to change this option to "true", but this does not change.
    It will be great if you could provide any solution to add details of the SMTP here?

    Thank you
    Jean

    It can also be configured in the EPM Configurator under common components.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • How to enable the print report or configure the print server

    Hi all.

    Currently using latest version of Apex (4.1.x) with 11g XE.

    Where can I find info, example etc to allow printing of the report? When I access this section of the attribute, I get a red warning message saying there is no impression servver not set up.

    Best regards, Luis...!

    Here is a white paper which should answer your questions...

    http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/configure-printing-093060.html

    Thank you

    Tony Miller
    Dallas, TX

Maybe you are looking for