Configuring updates 3 of 3 remains at 90% for hours, and then finally my computer starts. How can I solve this problem?
When I stop my laptop and reboot I get the text next message on my screen of configuration updates to date 3/3 0% then it goes straight to 90% and stay like that for at least 6 hours. So, I'm on my login screen. I have a laptop Acer Aspire 2920. Then when I log in there is not problems that all programs work correctly.
Hello
It happens every time you start the computer?
If this is the only time where you received this message, then it is because updates is installed on the computer and gets set up when you start the computer.
If this happens every time that you start the computer, and then follow the steps below to solve the problem:
Method 1: Try in safe mode.
Step 1: Try to boot in safe mode and check if the problem persists:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not persist in safe mode then I suggest that you put the computer to boot and see whether incompatible software:
http://support.Microsoft.com/kb/929135
Note: Configure the computer to normal startup by following step 7 from the link above.
Method 2: If above method does not resolve the issue, I would say that you are running the commissioning, repair and check if it helps to fix the problem:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
Tags: Windows
Similar Questions
-
I can print a range of documents, and suddenly, without any change in what I do, the printer & computer simply decide that they do not communicate with each other. Then, this problem will persist for days. Then, one day, it works again. What is going on?
Hello
You could try to turn on the "print spooler"...
This is the start must be set "auto"...
You can also to ensure that the "bidirectional support' is turned on.
The 'print spooler' can be found in the Panel... Administration tools... Services.
To find the bidirectional Support, right click on the printer in devices and printers, select the printer, PORTS tab properties and it will be near the bottom...
I don't know why it would work, leave, then work again, except perhaps for a problem of connection of some type.
-
MY phone is 6 and my phone using the last update (9.3.2) when I type the time massges is stuck... (VIber, imassge, wts place) How can I solve this problem?
Now its all ways stuck not only type
-
I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?
Hello grandpa_bill,
Thank you for your participation in the communities of Support from Apple.
If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.
For more information, see get help using iCloud for Windows.
All the best.
-
Since the update to El Capitan my AOL Desktop for Mac crashes. How can I solve this problem?
is not not a dick but its 2016. Why do you still use AOL for nothing?
-
Since a recent update of silverlight, I can't watch videos in fullscreen on my mac. How can I solve this problem?
Hello
Since you are faced with Silver light question on Msc, you can ask your question on the Forums of Microsoft Silverlight to get help.
You can also get in contact with Apple support.
-
When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?
http://support.Microsoft.com/kb/946414
«"Error when you download updates using Windows Update or Microsoft Update: 8000FFFF"»
Follow the information given in the above link to solve your problem.
See you soon. Mick Murphy - Microsoft partner
-
I'm not able to install automatic updates. How can I solve this problem?
I get an error message when I try to install the automatic updates. It says "some updates could not be installed in the header of the message. In the retail box, it says "the following updates were not installed". Just below this is the list of updates that might not be installed.
Update to filter junk mail in Microsoft Office 2003 (KB974771)
Update of security for Microsoft Office 2003 (KB972580)
Update of security for Microsoft Office 2003 (KB974554)
Update for Microsoft Office 2003 (KB973705)
How can I solve this problem? Thank you.Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?
I'm not that computer literate and do not understand what needs to be fixed.
This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.
I use ESET Antivirus Node32 software.
Hello
1. What is the error message or an exact error code?
2 have you made changes on the computer before this problem?
3. you try to check the updates?
I would suggest trying the following methods and check if it helps.
Method 1:
Reset Windows Update components and then try to download the updates.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756
Method 2:
File system scan tool checker and then try to press Ctrl + Alt + Delete and check.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):
http://support.Microsoft.com/kb/310747
Please respond with more information so that we could help you more.
-
I do automatic closing his day, the computer has not been connected in recent years. 46 updates downloaded, when I turn it on it tries to configuire updated and fails. He then returned back. How can I solve this problem?
Hello
What is the accurate and complete error message?
Method 1:
You can see the knowledge base article and check if it helps:
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358Method 2:
You can stop the automatic update and install an update at a time and restart the computer to verify the update is causing the problem.
Check out the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-offYou may need to temporarily disable the antivirus software updating.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks -
Program does not start. Error message "could not start because its side-by-side configuration is incorrect." How can I solve this problem?
Program does not start. Error message "could not start because its side-by-side configuration is incorrect." How can I solve this problem?
Solved!
-
Dear Sir, our creative cloud need updating, but always after 70 or 80% update, update stopped creative cloud - (display an error - 184 fetal. How can I solve this problem. Please help me...
Please visit get the following message appears when you try to install Illustrator 2015: Exit Code 184
-
Adobe update PHP to Muse to 5.6? How can I solve this problem?
Hi, my provider warns that my Muse site must be updated for php 5.6 because of security problems, how can I solve this problem? I have no knowledge on the scripts.
It must be done in a month... I think the only used php's in a contact form (?) that I don't know... Can someone help me?
Traore say it runs php 5.4 or 5.5 and 5.6 could be but I don't know how to change it.
Adobe Muse doesn't install PHP on your server. It download some PHP files for forms of contact who will use is some version of PHP on your server.
If your host tells you that you need a newer version of PHP, they also say they will update for you, or they can provide instructions for how you can switch to the newer version.
-
Windows Update
Error (s) found: code 80070645 windows has encountered an unknown error.
I had before the shock of two antivirus this proven system restoration started but no help.
Fix it to charge microsoft, but has not helped any.How can we if this problem, so I can install the updates I need?
Hi Wyattsdaddy,
Thanks for posting your question.
Step 1: Check if Windows update-related services are set to automatic and started.
Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.
Check the above services below:
(a) Background Intelligent Transfer Service
(b) cryptographic service
(c) Windows UpdateStep 2: Rename the Catroot2 folder
To rename the Catroot2 folder, follow these steps:
1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
2. at the command prompt, type the following commands and press ENTER after each line:net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output3 remove all tmp*.cat to the following folder:
% systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.
Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
Step 3: Reregister DLL files that are associated with Cryptographic Services
To register .dll files that are associated with Cryptographic Services, follow these steps:
1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
2. at the command prompt, type the following commands and press ENTER after each command:
regsvr32 /u softpub.dll
regsvr32 /u wintrust.dll
regsvr32 /u initpki.dll
regsvr32 /u dssenh.dll
regsvr32 /u rsaenh.dll
regsvr32 /u gpkcsp.dll
regsvr32 /u sccbase.dll
regsvr32 /u slbcsp.dll
regsvr32 /u mssip32.dll
regsvr32 /u cryptdlg.dllregsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 mssip32.dll
regsvr32 cryptdlg.dll
outputNote: Click OK if prompted.
Restart the computer.
Step 4: Empty the software distribution folder
1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
2. in the Services (Local) pane, click Automatic updates and then click on stop.
3. reduce the Services (local) window.
4. Select all the contents of the Windows distribution folder, and then delete them.Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
6. in the Services (Local) pane, click Automatic updates, and then click Start.
7 restart the computer, and then run Windows Update again.Item appraised: http://support.Microsoft.com/default.aspx/KB/822798
Step 5: Disable the security software
Note: You can enable it later.
Step 6: Scan Run SFC
Please follow the steps below to the auditor of the filesystem as the first steps:1. Click Start and type cmd in the box start the search.
2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
3. at the command prompt, type Sfc/scannow, and then press ENTER.Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
http://support.Microsoft.com/kb/949104/Step 7: Components to reset Windows Update
http://support.Microsoft.com/kb/971058Let us know if that helps.
Kind regards
Clement Kumar.Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.
-
I received a prompt on my Ipod touch 5th generation yesterday, that there is a new update of the Messenger application. So I tried to update, however, the app is now stuck on the phase "Waiting."... "and the logo has been disabled. I still get notifications of new messages from the app, but I can't open. I tried to remove and then reinstall the application but the application did not and the app store think that I always opened it. How can I fix this or return to the previous edition that worked?
Thank you in advance!
Hello cfossum,
Looks like you have problems with a third party on your iPod touch app, since the Messages belongs to iOS and you would receive separate not quickly update.
The resources below will provide some troubleshooting steps for the problem you are having with the Messenger application.
If an application you have installed unexpectedly closes, unresponsive, or does not open
Take care.
Maybe you are looking for
-
I have a new 64 GB AppleTV. With my old AppleTV (antique), view pictures in a slide show was easy. With my new AppleTV, can I access Photos with my Siri remote, and I get a message saying "no network available. Search the Internet and try again. I h
-
Disable Touchpad HP Envy Windows 8
I have a pen and press who confuses the computer and think I'm using the touchscreen. Sometimes I do, so I don't want to turn off the touch function. However, when I go on change something, like writing an email or a search on google, the touch keybo
-
problem with the game "serious sam"
I have w7 home top, I try to install the game "serious sam 3 hd" and nothing happens. The application does not setup.exe. is obsolete game. I did the upgrade direkt x, I also tried to run on older versions of w, but nothing.
-
How can I transfer DVD to my computer to a Tablet?
Just bought a Playbook of Blackberry tablet. How can I transfer DVDs to use my Tablet by computers DVD player. Mike
-
Media CD/DVD disc unreadable (ATAPI-iHAP222 8)
Hello - any CD or DVD I insert in the drive cannot be read. The computer says there is nothing on the disc. I have an i/o Magic 22 x DVD internal /, product id #IDVD22DLS that I bought about 2 years ago. I ran fixit from Microsoft, but it says the dr