Configuring updates stage 3 of 3 0% complete reboot keeps to this page

I have a hp laptop which has vista. I downloaded updates for. He said 14 were successful and 8 failed. After having their downloaded, he went to the screen that shows the configuration of updates do not stop computer. He is said to 3 of 3 0% complete and turns off. When it restarts it comes back on the same screen and then stops and comes back to this same page. I tried to go into safe mode, but it stops said this in safe mode. I hit f8 and tried to make something out of this screen. When I hit the choice of remedy, it asks for a password. I've never had a password. It doesn't let me do anything without him. I was the only one to have this laptop. I'm completely frustrated by this. Can someone help me with this?

Forrest,

Let us know if that helps.

http://support.Microsoft.com/kb/949358

Tags: Windows

Similar Questions

  • "Configuring updates: stage 3 of 3-0% complete.". Do not turn off your computer. "Todays automatically. Update on a Vista 64-bit machine

    The message "configuration updates: stage 3 of 3-0% complete.".  Do not turn off your computer. ' is on my screen for more than 2 hours.  OS 64 bit Vista with automatic updates on the value.  What should I do?

    Hello

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

    How to do a startup repair in Vista and Windows 7
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the system - Vista Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    This tells you how to access the system - Windows 7 Recovery Options
    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to do a system restore in Vista and Windows 7
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a disk of Vista or Windows 7.

    Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
    x 64 64-bit.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • Configuring updates stage 3 of 3 0% complete problems

    Configuring updates stage 3 of 3 0% complete...
    apparently a lot of people have the same problems.  Are tired of looking for the forums to help you, so far without success.  I did the following steps:
    in the middle of the loop of reboot, F8 and tired safe mood ... no luck
    F8 last good known Configuration ... no luck
    Virtually all F8 sections... no luck
    I did finally have access to my office using the startup disk and did a system past recovery.  However two days after I stop my computer and when I started it again once I had the same problem again.  Again made the boot disk and I noticed the windows update icon in the lower right and he strove for 11%, and I can not any respones on that in law or by clicking on the left.  I'm sure that if I reboot this system its going back in the loop of udated.

    P.S. I have the same problem on another laptop I have

    Hi esprad,

    First of all, let us rename the Pending.xml file and check if it works very well.

    Use the system recovery options to rename the Pending.xml file and edit the registry:

    Start Windows Vista and go to system recovery options:

    Insert the Windows Vista installation disc in the disc drive, and then restart the computer.

    When you are prompted to restart from the disc, press any key.

    When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.

    In the page install Windows, click on repair your computer.

    In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next.

    In the System Recovery Options page, click command prompt.

    Type cd C:\windows\winsxs, and then press ENTER.

    Type ren pending.xml pending.old, and then press ENTER.

    Type regedit and press ENTER.

    Select HKEY_LOCAL_MACHINE.

    On the file menu, click on load the hive.

    Look for the following folder:

    C:\windows\system32\config\components

    When you are prompted for a name, type Offline_Components.

    In the registry editor, locate and then delete the following registry

    subkey:

    HLKM\Offline Components\AdvancedInstallersNeedResolving

    HKLM\Offline Components\PendingXmlIdentifier

    Exit the Registry Editor:

    At the command prompt, type exit to quit the registry editor.

    Press ENTER.

    Click on restart.
    WARNING:

    Alternatively, you can follow the underside of article that speaks to rename the Pending.xml file:

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

    http://support.Microsoft.com/kb/949358

    I also suggest you to go through these steps in the links below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/d3a62a86-f1e0-4D58-9bb5-c64fb8913091

    http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/71bb4057-66ae-4EC2-a675-10c3471573b8/

    Let us know how it works.

    Kind regards

    Yama - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Configuring updates: stage 3 of 3-0% complete" start-up cirque. CANNOT BOOT TO THE DESKTOP

    Hello there,
    I desperately need help... I don't want to have to reload Vista Home Premium and all my software and get all authenticated (which total galley is the procedure!) once again. I installed the latest Java today from Java.com and everything seems to work very well. Latyer on I started the installer of my software to sync Western Digital and after that I said which files to sync to my removable drive from the hung computer. I thought that after 1/2 hour It sinply would not go anywhere, so I used Ctrl-alt-del to cancel then restarted and Western digital software.

    Now my computer is going in circles. It goes like this:

    -power on
    -beep system
    -Microsoft animation line starts
    -screen goes black
    -Orb appears
    -"Curtain" screen comes on saying:

    Configuring updates: stage 3 of 3-0% complete
    Do not turn off your computer

    -system reboots

    And it just happens again and again and again. He never at my office. I tried starting with the last start of 'good', safe

    mode and I went to my vista cd and made routine repairs, but all without success.

    Can it be fixed without having to do a major resettlement me?

    Thanks for your help.

    Hello

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.
    http://support.Microsoft.com/kb/949358

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

    I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

    • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
    • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
    • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
    • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
    • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
    • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
    • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
    • When I click on startup repair: it says "Startup Repair could not detect a problem.
    • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
    • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

    Hello

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.
    http://support.Microsoft.com/kb/949358

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • My laptop is stuck in a loop - "Configuring updates: stage 3 of 3-0% complete." Do not turn off your computer"appears.

    My laptop is stuck in a loop - "Configuring updates: stage 3 of 3-0% complete." Do not turn off your computer"appears.
    So going to "Shutting Down". The computer shutsdown portable & restarts, then shows the message "Configuring updates...". "once again,.
    before stopping again and so on. Can anyone help please?

    The link below has options to solve your problem of loop.

    http://support.Microsoft.com/kb/949358>

    UTC/GMT is 03:43 Tuesday, September 27, 2011

  • OS Vista - configuring updates: stage 3 of 3-0% complete. Do not turn off your computer.

    My laptop ACER Aspire 5610 in a loop of update configuration for three days now.  Don't have a Vista installation CD as provider did the installation.  Have tried all the safe mode restarts without success.  The display is still in phase 3 of 3 endless loop.  Ideas to fix/repair or recover data from disk hard 160 GB I need to keep?

    I want to thank everyone for friendly advice and assistance information.  After a few days (of frustration for me) and your continuous encouragement, I have finally overcome this "infinite loop".

    What worked for me was downloading neosmart.net for work properly CD/DVD burner.  I tried initially using my office old CD drive, but I forgot that it was a device to read-only and wouldn't be able to burn a copy of the restore CD.  I found a DVD burner work to correctly copy download neosmart.net.

    It took several boots cold on the laptop with the recovery CD as well as access 'shift F6', then quickly by "any key" for the necessary recovery menu.

    On Google, I noticed that this "configuration updates: stage 3 of 3-0% complete." has been on Vista for 2008.  It is almost of 2012 and it always creates problems?

    America happy Thanksgiving!

  • locked "Configuring updates stage 3 of 3 0% complete".

    More about recent updates to Vista, my laptop is blocked "Configuring updates stage 3 of 3 0% complete. I tried to restart in 'safe mode' but this doesn't seem to work. Any help please. Not too technical if you please

    Hello

    I suggest you to follow the steps from the link and check if it helps:

    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

    Reference: The problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • Update fails with the message "configuration updates stage 3 of 3 0% complete. Do not turn off your computer "

    Before closing my lap top, I did 8 automatic windows updates. The next day I had turned on the lap top and other 3 automatic updates had started to download, but when configuring the update a prompt indicates "configuration updates stage 3 of 3 0% complete. Do not turn off your computer ". A few moments later, the laptop restarts and then returns to "configuration updates stage 3 of 3 0% complete. Do not turn off your computer "and restarts again, this continues each time. I'm unable to advance in the journal on stage. Can you help me?

    Best regards Mrs Neil Dowdeswell

    Hi Neil,

    Method 1: Please try last known good configuration boot

    (a) restart the computer.

    (b) press and hold F8 while the computer starts up, which helps you to go to the Advanced Boot Options screen.

    (c) use the arrow keys to highlight and select the last well known configurations and press ENTER.

    This mode will take the last point restart managed computer that helps your computer to boot to the desktop.

    Method 2:  Please see below the article mentioned which may help you in the matter of fixing.

    http://support.Microsoft.com/kb/949358

     

     

    Hope this information helps.

  • How can I get my pc from freezing while configuring updates: stage 3 of 3-0% complete

    • How can I get my pc from freezing while configuring updates: stage 3 of 3-0% complete

    Hello

    • That you update you are installing?

    You can use the following methods that can help you solve your problem:

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

    I suggest you follow the method 1,2 in link above.

    Note: The article applies well to an another update, it should help in this case also.

  • Have Windows Vista on laptop. Windows does not... message is received. "Configuring updates: stage 3 of 3-0% complete" and then nothing

    Windows Vista will not charge in my laptop.  Receiver of message, "Configuration of update: stage 3 3-0% complete" and "do npot disable competitor."

    This message stays on 2-3 minutes then disappears and screen becomes white., after a few minutes more the restart process restarts and crosses th same process again, again and again.  Ant suggestions?

    Hi Francis,.

    Try the following and see if it helps.

     

    Method 1:

    Rename the Pending.xml file, and then change the registry.


    Note:
    serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) how to back up and restore the registry in Windows)

    To rename the Pending.xml file, and edit the registry, follow these steps.


    (A)
    start Windows Vista and go to system recovery options:

    1. Insert the Windows Vista installation disk into the disk drive and restart the computer.

    2. When you are prompted to restart from the disc, press any key.

    3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.

    4. on the page to install Windows, click on repair your computer.

    5. on the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next.

    B) use the system recovery options to rename the Pending.xml file and edit the registry:

    1. in the System Recovery Options page, click command prompt.

    2 type cd C:\windows\winsxs, and then press ENTER.

    3 type ren pending.xml pending.old, and then press ENTER.

    4. type regedit and press ENTER.

    5. select HKEY_LOCAL_MACHINE.

    6. on the file menu, click on load the hive.

    7. look for the following folder:

    C:\windows\system32\config\components

    8. When you are prompted for a name, type Offline_Components.

    9. in the registry editor, find and delete the following registry subkey:

    HLKM\Offline Components\AdvancedInstallersNeedResolving

    HKLM\Offline Components\PendingXmlIdentifier

    C) exit the Registry Editor:

    1. at the command prompt, type exit to quit the registry editor.

    2. press ENTER.

    3. click on restart.


    Method 2:

    Refer to the steps in the following Microsoft article.

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    Notes:

    Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

    When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    Hope that the information provided is useful.

  • Configuring updates: stage 3 of 3: 0% Complete do not turn off computer

    For 3 days, the laptop's display screen above to turn off.  How to break this vicious circle?

    Hello

    When you try to install updates from Windows Update on a computer that is running Windows Vista or Windows 7, you may receive the following message is displayed:

    Configuring updates step 3 of 3. 0% complete

    After you receive this message, the computer restarts, and then you receive the same message again. Windows will not start and the computer continues to restart and display the same message. The update is not installed successfully.

    Method 1: Start Windows with installing Windows disk and then use the repair feature

    Starting up Windows:

    1. Insert the Windows Vista installation disc in the drive and restart the computer.

    2. When you are prompted to start from the disc, press any key.

    3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.

    4. on the next page, click on repair your computer.

    Select a restore point:

    1. on the System Recovery Options page, click the version of the Windows operating system you want to repair, and then click Next.

    2. on the System Recovery Options page, click System Restore.

    3. on the System Restore page, click Next.

    4. Select a restore point during which you know the operating system works, and then click Next.

    The restore point should be a date that precedes the first time you experienced the problem described in the Symptoms"" section. To select a date, use her choose a restore different option and click Next.

    5. If you are prompted to choose which disk to restore, select the hard disk on which the operating system is installed, and then click Next.

    6. on the confirm your restore point page, click Finish.

    7. when the restore process is finished, click on restart.

    Note: To avoid this problem in the future, see the steps in the "More information" section to manually install the update for Windows.

    Note: For more information about how to use the system recovery options, see the Microsoft Web site at the following address:

    Startup Repair: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    For more troubleshooting steps and for more information about the problem you are having you can refer the article below.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Let us know if this helps

    Concerning
    Anthony.

  • Stuck on "Configuring updates stage 3 of 3 0% complete

    I have a windows Vista x 32 on a Dell portable system.  He was fully functional when I finally stopped him.  I just started to find the Stage 3 the page shown growth of 0% of Windows Update, then it restarts. Stuck in this loop.  Have tried using F8 to boot into safe mode, to get the last proper installation and prevent automatic reboot, without success, she keeps just reboot.  Also tried the systems repair, but with my drive encrypted, it doesn't seem to work. What can I try?

    Windows Vista keeps restarting after an update

    Hello
    You can try the troubleshooting provided in the link below steps to fix the problem.
     
    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
     
     
    Note: If above does not work, you will need to check with the manufacturer of origin.
  • Configuring updates: stage 3 of 3-0% complete - system reboot

    OK ive tried a whole bunch of these responses on already and nothing is really bad with computers to work im and it's just insane for me why should I pay money for something that dosnt work? not only it doesn't but it cannot even solve the problem if tried if tried safe mode f8 and repair ive tried the last config of work known. I feel like ive tried eveything why are there so many stupid problems with this? I fell like go out and buy a mac because it's bullshit... I have to use another computer to check this, because my laptop mute is stuck in this mode aaaaaany help would be nice or a number to call or something

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your falls into the above category: download the ISO on the provided link and do a repair of the disc.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Window Vista Home Basic__Configuring updates: stage 3 of 3 0% complete - do not turn off your computer.

    Ideas: Insert an error code or give a brief description of what you're trying to accomplish or difficult.
    I started my Dell laptop and it displays a message to update ~ configuration updates: step 1 of 3 then 2 of the 3 then the last 3 of 3 starts and the last message I see before it stop yourself. Configuring updates: stage 3 of 3 0% complete - do not turn off your computer. This he stops only to start up in the last window... step 3 of 3 0% complete. How can I fix?
    How can I get beyond this update to get into my computer?

    See as a guide on options:

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    When you try to install an update from Windows Update on a computer that is running Windows Vista, you may receive the following message: Configuring updates step 3 of 3. 0% complete
    After you receive this message, the computer returns to the screen that displays the same message. In addition, the update is not installed successfully, and the computer restarts.
    TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for

  • Groups and tabs disappear on the launch of the browser

    Hello! I have 5 or 6 groups of tabs, each containing 2-10 tablets inside. Generally, everything is ok, but twice, I closed (ALT + F4 or CTRL + SHIFT + W) Firefox and found no group, no tabs on the next launch. What's wrong? It happened in version 6.0

  • Folio 100: warranty issues

    Hi all I open this thread, to raise questions about the Folio 100 tablet. As many of you know, Folio 100 forum was closed, son have disappeared and guarantee was denied. I was one of the unlucky ones, facing a broken screen because he had jumped out

  • The logic using Soundflower audio recording system

    Let's start with the agreement that I must be a fool. I found tutorials on the net for logic audio recording using sound flower and it seems very simple. I actually have to make what I want sometimes. For the life of me I can't recreate my past succe

  • EqualLogic FS - SMB 3.0

    Hello are there plans to implement SMB 3.0 peripheral Equallogic?

  • Cannot run the installation of the software for Photosmart C4580 with 8.1 (64)

    I deleted all the software my computer HP running Windows 8.1 (64-bit) and tried to reinstall the drivers and clean software for both my Photosmart C4580 and for my Scanjet G4010, but when the installation starts after downloading, I get an error for