Conflict between WXP and Installation CD of BT USB stick

Hello
I admit it - I'm a bit slow with some of these new gadgets but that's...
I recently bought a Bluetooth Dongle, which describes itself as a "TOSHIBA BLUETOOTH STACK FOR APACHE BY CSR.
Installation instructions say not to connect the dongle until the software is installed, however in the middle of the installation you must plug the dongle into a USB port.

The installation continues, but XP decides that it has detected new hardware and tries to install it, is so all I get error messages when I try to put in place. I then "uninstalled" and let XP its own thing. It is detected as a generic and same dongle if he recognizes a mobile telephone and allows the two match - I can't transmit data between the two. They just do not connect? Should I install the correct software on top? Ideas / advice please.
Thank you
Mike

Please do not install the original Toshiba Bluetooth stack, because it's for Toshiba Bluetooth hardware only.
Remove all batteries-BT out of your system. Install the BT stack, that came with your USB BT adapter. Don't care
Windows XP Home edition. Your BT stack will install on top. Your BT-stack is very probably an OEM version of the Toshiba BT - stack, so it should behave very similar. So advises on the following Web page should also be suitable for you:
http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/FAQ/bluetoothnotworking.html

Tags: Toshiba

Similar Questions

  • Printer J4680 and G4050: conflict between g4050 and J4680

    I just bought a new computer and before I have to charge the HP G4050 Scanner slide, I wonder if anyone has had this problem. I already have installed jet J4680 printer.  When I tried to install the G4050 besides the J4680 would not. They seemed like they confilict.  Any help would be good. Thank you

    I just wanted you to know that I installed the slide G4050 scanner and loaded OK. I think I have the Windows 7 resolved the problem of conflict between the two. Thank you.

  • Portege 4000 conflict between WiFi and Bluetooth on Windows 2000

    I recently replaced XP with Win2000 on my Toshiba Portege 4000. I also downloaded the latest drivers from the Toshiba site, using pref to Win2000 and Portege 4000.

    When you start the Bluetooth Stack V4.00.30 he wiped out the wireless LAN feature. I know that it is not possible to use Bluetooth and wireless at the same time.

    However, it is a permanent disability. During the uninstallation of the Bluetooth stack V4.00.30, wireless comes back to life.
    Is there someone who has a fix to this problem?

    Thank you!

    Hello

    Just a question: can use you the FN + F8 key combination to switch between WiFi and BT connection?

    AFAIK it's between possible and turn on both devices at the same time. In this case, he's shown great caution with content to follow:

    Devices Bluetooth and WirelessLAN function in the same radio frequency range and may interfere with each other. If you use Bluetooth devices and WirelessLAN simultaneously, you can sometimes meet optimal network performance or even lose your network connection. In this case, always stop a Bluetooth connection or your WirelessLAN

    As I said using the FN + F8 key combination, you should be able to switch between WiFi and BT connection.

  • Conflict between McAfee and Microsoft Security Essentials?

    I installed Microsoft Security Essentials on a system that had McAfee.  I thought I had the features on McAfee off the coast.  I started a full scan with MSE.  He locks up in Microsoft/Installer, which is where McAfee says that he kept finding three horses of Troy, ZeroAccess.ee, ZeroAccess.eh and generic.DX!12536d125737.  I finished the scan, but now at startup, Windows says that it has identified a problem and you need to restart in one minute.  I discovered that when I made off McAfee, it was only 15 minutes, therefore, it was still running when MSE was running her scans.  Now all McAfee services are turned off, but the problem persists.  I guess that both programs are in conflict.  The one minute message that the computer will be restarted lights Mode safe as well.  I did a restore (Vista) system and still have the problem. I guess I should remove one of the security programs but do not know what should be my plan of action.  Any help?

    Repost - See the post from Stephen Boots and run one of these "hot" spares and potentially eliminating your malware problems: http://answers.microsoft.com/en-us/protect/forum/protect_scanning/apparently-got-a-virus-wednesday-discovered-it/a1c1f188-8895-4391-90ac-f3d4c2d76418

    Alternatively, if Malwarebytes could not find try TDSS Killer or Hitman Pro. But one of these rescue disks might be the best...

    Make sure that you have a good processor and 4 GB of RAM preference if you install Win 7.  If you reformat / reinstall the OS which should also remove the malware.

    Good luck...

  • Conflict between IE8 and Adobe Flash Player

    Hello

    I am running Windows XP Pro SP3, IE8 and Adobe Flas Player 12.0.0.70

    On some WEB sites when it is opened with the Information IE 8 bar (yellow) opens with a message

    "An add-on for this Web site has failed. Check the security settings in options Internet of potential conflicts.

    After cheking modules are so dissable

    Shockwave Flash Object name
    Publisher Adobe Systems Incorporated
    Enabled state
    Date of the file yesterday, 21 February 2014, 16:27
    Version 12.0.0.70

    Then IE does not worning.any the information bar more.

    Reinstalled IE 8, also playing with the security settings, reinstalled Flash player, but without success.

    Imidiatelly after activating the shock wave, information on some websites bar appears again.

    For egzample like this:http://www2.staseraintv.com/

    Please me advice what to do to avoid this inconvinient.

    http://support.Microsoft.com/kb/318378

  • The conflict between UnicodeString and FilePath linker

    I am trying to include ai::FilePath in my project using its two files "IAIFilePath.cpp" and "AIFilePath.h"; However, it seems to be a contradictory function, each defined by check_result (AIErr) Sub which is defined in both static, so I get linker errors.

    Any ideas anyone?

    Thanks in advance.

    Jeremy

    Very strange. Sound does not complain about AIFilePath.h, he complains about IAIUnicodeString.cpp, which DOES not define check_result (line 54). Although both are static, so why would they be in conflict I have no idea. Two functions with the same name shouldn't matter as long as they are both static. Heck, if even one is static, it shouldn't happen. I'm trying to reproduce this error here and I can't.

    And this is a mistake of the linker? C2084 is a compiler error, not linker error. C2084 is the error that you specified, but I can't actually get a compile error, no matter what I do; If I get the 'static' at the same time I get "LNK1169: one or more multiply defined symbols found. From the looks of the aid, the only way to get C2084 is actually set the function in the CPP even twice.

  • conflict between Reader and Acrobat, read aloud

    I installed Reader 9 on a pc. Read aloud worked well. Then install Acrobat test. Now ROL in does not. Try to read the text, it produces sounds without meaning, as if the software became Dyslexic.  Any ideas?

    Thank you

    Installation of Reader and Acrobat is not recommended. If I were you, I remove all traces of both and reinstall the one I want to keep.

  • Conflict between Javascript and Amazon

    Using Safari 9.0.3. This week I started problems ordering from Amazon (Amazon pages of gel). It turns out if I turn off Javascript, the problem goes away. Community support Amazon shows a lot of customers with the same problems. No help from technicians of the Amazon. My question is, is this Javascript, Safari or Amazon?

    Morgan R,

    I almost had to laugh when I saw your post.  There is at least one thread that is old more than twenty days and 5 pages long, so far.

    Please go here for a "definitive answer"...

    This could be the cause the dervishes ball or freezing page in Safari (most often in the Amazon)?

  • Conflict between cubase and adobe audition? -Cubase rereads - hearing does not work!

    Hello

    I have recently reinstalled software on HDD SSD after the original fried.

    Previously all worked without problem. Same operating system with the same versions of software and driver etc. The

    only difference is that I have installed Adobe Master Collection 6 before Cubase.

    Someone knows if that might be or was a problem before you start to uninstall stuff. ?

    DOH! Apologies - Audio mapping is not as should have been.

    Everything works as should be.

  • Conflict between CS6 and CC on my PC.

    When we were about to buy Photoshop, I downloaded and installed the demo of PS - CS6.  Right at the same time, CC has been launched, and we have subscribed to that instead.  When I open PS, it says CC.  Even if I click on the CS6 icon which is always in my program menu, it opens in the CC.

    Other Adobe products, however, believe that having CS6 only.  I tried to install a new action for CC table and received a warning that said I couldn't go forward because I had not installed CC.  Instead, I installed the version of CS6 table and Adobe Extension Manager is allowed only.  Once I opened PS, however, the new action table is not installed.

    Thus, it is not possible for me running CS6 on my machine and CC works perfectly, but the extensions Manager think I don't have CS6 on my machine.

    Thank you.  Photoshop is still the largest program ever created.

    Hello, what version of the extension manager you have? for CS6, have you tried in the start menu if you are on a PC?

    What version of photoshop is it? 14.2? (help > information system...)

  • A link problem, conflict between hyperlink and textframe

    Hi all

    I noticed erratic behavior after the creation of a hyperlink text in a textframe. Although the link seemed ok when previewing (both in Muse preview mode, as in a browser (Chrome) Preview), she had abruptly changed his State when I was about to click on it. After a few perplexed attempts, I noticed that the hyperlink is transformed into the 'pointed' state once the mouse is over the textframe containing the link and not the link itself. When I click on the link, the behavior is as expected, but moving out of the textframe and reintegrating gives the same effect. Somehow the textframe intercepts the mouseover, instead of the link event. Is there a way to disable this behavior and the target of the hyperlink instead? Thanks in advance. (I searched this question in the forum and had similar problems with menus, but not with executives of related, if I forgot an answer, my apologies in advance.

    Hello

    Please select the text frame and click the States window and let me know what you see. It would be better if you can share a screen like this,

    Kind regards

    Abhishek Maurya

  • conflict between 10g and 10g express edition

    Hello guys... I got in my system oracle 10g Enterprise edition and then I installed oracle 10g express edition... and the problem is that if m trying to connect via the sys account then he gets login in the express edition of 10g and m not able to access my 10g database... Enterprise edition so

    My question is how should I get login in my enterprise edition 10g using the sys... account so please help me out

    Thanks in advance

    How do you try to connect from the command prompt? I do not use XE, but if you try the command prompt, what happens when you issue.

    c:\set oracle_sid=
    

    After that, try to make the connection and post your comments.

    HTH
    Aman...

  • Is there a conflict between IE8 and Flash when updating?

    I have Flash Player 10.0.22.87, Internet Explorer 8 and Windows XP sp3. When I try to update Flash 10.0.32.18, I get an error message: the instruction at "0x130a0068" referenced memory at "0x130z0068". The memory could not be "written". (I notice that the two numbers are the same). Clicking on Debug does not help. I'm unable to click on the message at the top of the screen to make IE allow the add-on. Some games are not displayed correctly since I updated to IE8, which is why I thought that a Flash update is necessary. Any advice would be welcome.

    Hello

    This forum is for discussions of the questions in the forum. Your question is better suited for Flash Player forums.

    Please stay as I move this thread to the appropriate place.

    See you soon... Rick

  • Start-up and installation of Windows 8 USB result in a black screen, followed by a blue screen.

    Hello.

    I help my friend who has a problem with his computer running Windows 8. It started with his computer, gel and should it reboot.
    After the restart, he is greeted by a black screen for about 30 minutes, followed of a BSOD flashin (the smiley one). No error code.

    I made a bootable USB key with Windows 8 on it, downloaded from the Microsoft Web site. After the start of it, I am presented by Windows 8 logo, a circle of rotation, but then it goes black and after 5 to 30 minutes I am getting the same BSOD.

    I tried to disable all I can in the BIOS. The BIOS detects all hardware in the computer.

    The computer is a portable computer. ASUS X401a.

    I hope someone out there has an answer for me!

    Thank you.
    / Carl.

    Carl

    The first thing I would do is to try to boot from the victory 8 dvd.  (if you don't have it get a).  If your problem of computers is what associated USB then start on a USB key will cause a BSOD.

    If this does not help in pulling the HD to put in an envelope and try another computer can help if this does not work on the other computer it can point to the HD as the question.

    I would also try vi USB boot using win PE (Google for download site)

    IF all of the above do not help it is time to bring it to a professional or to the room if it is under warranty

  • Conflicts between the 'Éléments' and 'CC '.

    When installing CC, I came across serious problems. The German support he blames to my network, but this was not true. My admin has discovered that there is a conflict between 'Photoshop Elements' and CC. As a precaution, we also uninstalled 'First 11 Elements'. After the installation of CC has worked well.

    There is of course no need to have 'Éléments' as well as 'CC Photoshop"on a single computer, but for my a few videos YouPorn 'Premiere Elements' was quite enough. Anyone know if it is possible to reinstall 'First Elements 11' on the same computer with 'Photoshop CC' and "Lightroom CC"?

    Thank you and best regards.

    Normally, there is no conflict between different adobe products and versions (except acrobat).

Maybe you are looking for