Conflict LVlib

Similar Questions

• labview deployment project has conflicts

  I'm having a problem with a deployment of teststand (2013 Teststand, LabVIEW 2013)

  I have a deployment that deploys my project LabVIEW that contains all of the drivers (classes and lvlibs) for use in my sequences.

  During deployment (LabVIEW options), I uncheck "exclude vi.lib", "exclude user.lib" and "exclude instr.lib" because the deployment should also work on a PC that has only some runtimes and an operator interface.

  The build is complete without errors, but I can't open the deployed project...

  --> not on a development PC because it detects conflicts (XNodeSupport and some in vi.lib picture.llb of the vi)

  --> not on lifetime PC (file not found)

  Else you have noticed the same behavior?

  He works with LabVIEW and TestStand 2010.

  Thanks in advance for your help, advice and tips :-)

  (Cross post, also on Lavag.org: here )

  NEITHER of the spirit together, we have identified the problem.

  The GDS (suite Goop development) causes conflicts.

  The problem is identified, the solution is underway.

  See you soon,.

  Wim

• 'Clone' of the project library (.lvlib)

  We have a study on sound localization - move us a speaker with a robotic arm, play sound through the speaker, ask our subjects to point a laser where they perceive the location of the sound and press a button.  We can also turn on LEDs and lasers, adjust sync settings, even to move the sound source.  The various tests are "programmed" by entries into an Excel workbook with columns for the timing, healthy situation, sound settings, etc.  In addition to the Excel workbook, we generate 3 output files - a header file XML that describes the configuration of the recording (analog and digital channel names and scales) and saves the settings of each trial as it is executed, an XML event which records all of the events of "point-in-time", such as Messages, status changes, or modifies the digital I/o, and a file of examples that contains N (usually 16) sampled analog and digital channels sampled at 1 kHz.  We control all of this a LabVIEW Real-time project, which also includes routines to study, manipulate and analyze data of output files.

  The project evolves (slowly) - we are currently at Version 2.0 (Version 1.x was developed in LabVIEW 7.0, this is the complete rewrite 2012/2014, "start from scratch and do it right, or at least better").  We are contemplating adding the ability to study the sounds delivered via stereo headphones (vary the volume from left to right or by adding a small time gap between channels) and calls this Version 2.1.

  To try and prevent "Version hell", we intend to do "backward compatibility" Versions - we will Add some new columns to the workbook Excel for new parameters in headphones, but put in place LabVIEW code to simply "do nothing" (with headphones) if he reads a Version 2.0 workbook where these parameters are lacking.  This allows us to code of Version 2.1 allows to make a Version 2.0 experience.

  We are faced with one of the problems are to know how read and analyze or manipulate data files resulting.  For example, the header file contains specific sets the version of the data, which are analyzed by the XML parser and converted directly into a Cluster of LabVIEW.  Thus a Version 2.0 file must be read by the code who "knows" a Cluster of Trial Version 2.0, whereas a 2.1 file needs a trial 2.1 Cluster.

  When I read the header file, the first thing I encounter is the Version number (2.0 or 2.1).  Knowing this, I could, in principle, use a Case statement to call a Version 2.0 or Version 2.1 analysis routine.  But I am trying to 'avoid a mess', and libraries in the project seems a good way to do so, if I understand how to use them properly.

  [For now, I have to say that I tried a little experiment: I have created a new project, built Library1 in a folder with a 'Hello' and 'Test' Library1, built the library 2 (inside the folder library 2) with 'Hello' and 'Test' (different) and called the high-level.]  Worked well.  I then "took a shortcut" and copied the folder Library1 (outside of LabVIEW) on the menaces3.  When I said that the project to add 3 library, I had a mess of conflicts, which I couldn't resolve.  And I "broke" LabVIEW - even after removing all the .lvlib and the .lvproj files, I couldn't create a project and make a folder to add (Snapshot) without a missing file error to appear.  I did the experiment using LabVIEW 2012 - this problem has affected not only LabVIEW 2012, but also 2013 LabVIEW and LabVIEW 2014, but not LabVIEW 2011.  I spoke with the support of OR, which are also puzzled.  I am currently working in a new virtual machine until I can get LabVIEW "repaired"].

  What I want to do is identify all Version-specific routines in my folder of analysis and include data in this case TypeDefs for the Version-specific parts.  I would then "wrap" all this in a project library Version 2.0.  The code "on the outside" would have its own copy of TypeDefs (she could use the "Latest Version", as external routines are supposed to be 'backward compatibility'.

  So here are my questions.

  1. Suppose that I restructured my project so that I have a record, both "Real" and "Virtual" (in the project) parsing, and it contains a subfolder called Version 2.0 that contains the Version-specific TypeDefs and most of parsing code.  Is there an easy way to transform the Version 2.0 to Version 2.0 Library folder so that when I call functions in this library, they use Version 2.0 of the TypeDefs of the library, regardless of the TypeDefs declared in the main routine?
  
  
• Assuming that I have a folder of Version 2.0 of work and the library, is there an easy way to "clone" to make a folder of Version 2.1 and the library?  If so, all I would need to do the "work" for Version 2.1 of the code would replace TypeDefs of Version 2.0 in the file of Version 2.1 with the "correct" TypeDefs, and (b) add any additional analysis code is required for the new features in the new Version.

I apologize for the long-winded nature of this issue.  I look for tutorials on libraries of the project (there are), but none covered this topic.  To pay for your patience, I am happy to write and submit to the OR for a future white paper on libraries of the project - which would speak?

Bob Schor

PS - Moderator - if it belongs to another Forum, feel free to move it.

On the money Bob!  Save under... Duplicate the hierarchy to the new location (requires that the new library offers a new name)

To convert a virtual folder to a lvlib just to create a new lvlib in the project and move the project members want in the new lvlib Project Explorer does the rest of the book nitty gritty on registration of the members of the lvlib with the new property information.  (You will be prompted to save the members when the composition is changed)

And Yes, it's the kind of mistake you don't do twice.  And, believe it or not, I had this type of issue used to justify not using projects! "they are too much hassle when you mud round in windows Explorer ' then I asked them if the never borrowed the car of their father and did not him tell you parked above on the next Street.  They now use projects.

• lvlib way: change the path of screws included in a pilot lvlib

  Hi all

  I downloaded a driver LV for my device OMICRON CMC256 + on the Web site of NOR.

  This driver is administered by a lvlib. This lvlib is designed to be installed on the folder.

  For the sake of versioning, I don't want this driver must be installed on my file, but to be part of my current dev. So I saved the lvlib and the files in one of my project folder.

  This creates conflicts in my project, and try the driver files to be loaded from .

  How can I specify a new path for these screws / lvlib?

  After trying several solutions, if found one that works.

  The lvlib must be saved in a project file. It will be geenrate conflicts.

  Then, you will need to open each VI calling one another VI in the library itself.

  The good idea is to start with the VI tree (when it is available) and then continue with the examples.

  Each of these screws, opening for each VI figure you will be prompted to choose between 2 ways: the current path of your lvlib and the path where is expected to be. Choose the right path and mass compile it (CTRL + SHIFT + arrow Run), save it.

  OMICRON C256Plus library is big of 100 screws. It contains 1 VI tree and 5 examples. You can imagine the number of times wherever I had to redirect the screw to the right path! It took 10 minutes just to redirect everything to the right path!

  lvlib must refer to their screws relatively in its own way!

• Conflict loading two LLBs

  Hey,.

  I'm having a problem call two separate LLBs of TestStand within the same performance. If I create a file of sequence and call other LLBs execution can operate without problem. If I create a file of sequence and call LLBs of both LLBs loading will fail and forms will give this error message:

  

  I made sure that all the screws that have been created in each project are only appointed so that they come into conflict during loading. But I'm not aware of what other possible conflicts that may exist or a method for the diagnosis of what is at the origin of the conflict. I know that the LLBs both contain some common XNET Subvi another common Subvi, but they should be the exact same Subvi and I didn't have a conflict with the other LLBs in similar circumstances.

  So, I'm not really sure where to go here to solve the problem. Any help would be greatly appreciated.

  Thank you

  Kevin

  Hey Kevin,

  This looks like a problem with namespace for me. Even if the components of VI are named differently in the LLB, it would probably still a problem. LLB does not prevent name collisions.

  I recommend actually change how you distribute your components VI as. LLB is a little dated and have some drawbacks. My recommendation would be to manage your LabVIEW code as libraries in the project (.lvlib) or packaged the project libraries. The last post of this thread by user Jervin Justin actually brings up some really good points about it,

  http://forums.NI.com/T5/NI-TestStand/what-are-the-advantages-of-using-LabVIEW-projects-in-TestStand/...

  Based on this thread (and the information contained in this white paper on libraries of the packed project) I probably recommend a packed library project would approach for a solution to what you are looking for.

  Here are some additional documents that you might find interesting:

  TestStand Help: Libraries of the LabVIEW project: http://zone.ni.com/reference/en-XX/help/370052K-01/tsdeploysystem/infotopics/lvprojectlibrary/

  With the help of LabVIEW with TestStand (page 7-7): http://www.ni.com/pdf/manuals/375070b.pdf

  Honestly, I would try on implementing an approach to project packaged for your test from VI library as opposed to the. LLB. If this is not feasible for you, however, we can try to address the problem in a different way. Let me know.

  Have a great day!

• Resolution of conflicts of LabVIEW

  Hello

  I recently converted to labVIEW 2012, and I'm trying to clear up the conflicts in my project.  The problem that I am running is that when choosing a conflict that is not no options to remove the project item.  In addition, conflicts are dependencies and are not physically on the C drive. Any advice on how to proceed are appreciated.

  -Bob

  Let me share a few screenshots:

  The first of several conflicts is the conflict of Agilent 86100 Series.lvlib as shown in the Project Explorer window.  The path indicates that the file is located on the C: drive.  In fact, the file does not exist in the specified path.

  

  Then using the dialog conflict Resovle I get this screenshot, which shows the conflict is the same file on the T: drive as well as the C: drive.  The file is indeed on the T: drive, but not on the C: drive.  The problem is that I have no options for the elimination of the reference to the C: drive in the project.  All options are not there or grayed out.

  

  Thanks for the help.

  Sometimes it takes to solve "high conflict" (for lack of better term) in order to resolve other conflicts.  Your screenshot, it seems you can resolve some of the conflicts.  Once you get those resolved, maybe you can solve the others.

• Y at - it something to pass classes without causing conflicts to project?

  I am using OOP for a few months, but I was frustrated a handful of times trying to move classes. With other files, I just go in file display and click 'Move to disk', which has always worked very well.

  But if I try to move a folder that contains several classes or classes nested in subfolders, the FREAKS outside project. It of almost like LabVIEW moves the files one at a time, but not updated to other classes on new locations of methods, dependencies, etc. Then she moved something out of use and then all the classes that is supported on this monster file out, ask yourself where the file went.

  Then, about a thousand warnings pop up, and I can't reject them both. In addition, the resolution of conflicts does not work because LabVIEW confused on the point where the files loaded into memory are now located on disk.

  I had to source control returns to my workspace set to return to a State of operation. Then I usually move the classes on one at a time, which is a desperately slow and painful process.

  I'm doing something wrong here?

  I ran into similar questions before. Project files and library are just text. I moved things and edited the paths in the project/lvlib file. Can also use a backup as the library file. Your move is transformed into a copy and rename operation.

• El Capitan: Conflict of file Finder? Suddenly deleted files

  It happened now on three different occasions: I did nothing in particular on my Macbook Pro (El Capitan 10.11.5; 2.7 GHz Intel Core i5, 8 GB RAM, SSD 256 GB DDR) in collaboration with some files in a folder, when suddenly the folder containing these files was empty.

  For example once I was renaming a folder and then open it and print a pdf in this folder. After successfully printing file, I closed and switched back to Finder - to meet the folder above to be empty and the file printed pdf just disappeared, as well as all the other files which are used to be in this folder. Then I noticed that the folder was suddenly his previous name (one than what it used to be before I changed it). I found the files missing in the trash and lost in the folder files superior (to the strange abnormal behavior) with 'conflict' and a long series of numbers preceding its actual file name.

  More tips: the first two times it happened, was when I had open Parallels running Windows 10. The third time, Parallels did NOT work.

  I couldn't find someone who described such behavior, the web or on Apple's site to research. What is wrong and, above all, how can I stop this behavior?

  Your car could be at fault. Avoid any race condition that you can induce the wise software you use that would result in the disappearance of files.

• Software conflict

  Hey fam... I have a serious problem. I think that the last updated OS (10.10), he created a software conflict somewhere. When I connect it goes into perpetual search mode, and then my machine just stops. If I sign up in any accounts or the comments of my children it opens fine. And to top things off to something which arrived at my back upwards as well drive. I just need to make my files. Can someone out there tell me how I can access my files.

  Thank you...

  Stop

  Disconnect all external devices

  start in safe mode and log on to the account

  Try safe mode if your Mac does not end commissioning - Apple Support

  Open utility disk (macintosh utility HD/applications/utilities/disk)

  Select the boot hard drive, click on repair permissions (if you misrepresented your last "10.10" instead of El Capitan 10.11.x OS then it will not be available in disk utility.)

  You can also start on the child's account and access your account files by changing the permissions that should not be taken by chance and probably not tempted until find you what the problem is with your backup. If you want to specify to include the details in this thread.

  In any case, that you can target your mac to another computer on disk and access the drive from another computer.

  Share files between two computers with target - Apple Support disk mode

• Address conflict IP TC and iMac

  Is back from vacay to an IP conflict on my mid 2007 iMac error message. My TC Airport caught the iMac IP and will not let go. Any other device on the network wireless can enter an IP address. We have AppleTV, iPhone, iPad, even a G5 which are humming and I'm dead in the water. Cannot use a static IP address to circumvent the problem, as I previously for other problems. I'm under El captain now 10.11.5 I rebooted all dozens of times, even deleted my AirPort Extreme Extender to eliminate as a possible source of problems. My ISP don't touch anything Macintosh, but they confirmed with other devices running, it must be the iMac. I tried to change the password on the TC so that any unauthorized connection would fall, but failed. Do I have to reset the TC? If I do I will lose my backups? The iMac and the G5 were both using the TC for backups.

  My TC Airport caught the iMac IP and will not let go.

  Try the following to release and refresh the IP address provided to your iMac to the Time Capsule (TC):

  • System Preferences > network > Wi - Fi > advanced > TCP/IP tab
  • Note the value for the IPv4 address
  • Click on the button "renew the DHCP lease.
  • Again, check the value of the IPv4. It changed?

  You should not have to reset the TC to solve this problem... but if you do, any of the types of discount to zero (soft, hard, or default) will erase all the data on the internal drive of the TC or any drive connected to its USB port.

• Conflict of appearance of Firefox

  Evening everyone.

  I've recently been tweaking my general theme to the Windows 7 desktop. I found a theme that I really like, but I seem to have a conflict with only Firefox. The theme is darker, with a clear background to help read the words. However, the default theme of Firefox, a kind of light background and foreground, make it almost impossible to read the tabs, but also to encroach on the window at the top function keys on the right. I'm trying to understand if there is a way to give the control of my theme in this application or if there is anything that I can to remove this conflict.

  Example: http://i.imgur.com/QYMsj3J.png (also attached)

  Thank you!

  Clinton Bogacki

  said jscher2000

  What is the name of this theme and if you downloaded it, where it comes? In case, someone has desire to try to get the 'practice' with her.

  I've since changed themes to test different variants, but the theme was VS steam I think. Of Deviant Art. This problem occurs with all the themes I've used. I think I solved the problem, however, by opening a command prompt and using the command: sfc/scannow

  The command only runs all the system files and restores all handles the files in their original state. I have handled my ExplorerFrame.dll at one point leading to this problem.

• Does conflict ghostery add-on, and what is the difference?

  I installed ghostery, but now Firefox tells me "add-on" is available. What is the difference and they will come into conflict?

  As far as I KNOW, Ghostery and Lightbeam match a little at work. What a difference I know that ghostery have some features integrated to block or whitelist of Web sites you visit.
  While lightbeam just likes to Watch supervisors and tell you graphically about third-party connections.
  so, if you use ghostery then it can useful for a faster loading Web sites because you block unusual food extracted from Web site, while lightbeam cannot do something with the site.

  Firefox is add-on cause reviews of >'s done it with our great
  developers, completely understand the part of the user experience.
  > because it is nothing to do with the Web sites, so a Web site owner perspective, you can display ads on your browser, without the authorization of changes external.
  Monitoring and privacy framework.
  Take a look at https://www.ghostery.com/en/ find out about Ghostery and Lightbeam is accessible via https://www.mozilla.org/en-US/lightbeam/ .

• 4 Apple TV on my office network, get conflicts of IP addresses between them despite being assigned to the reserved addresses.

  4 Apple TV on my office network, get conflicts of IP addresses between them despite being assigned to different addresses reserved in DHCP

  Although it seems that they realize and correct this means my network notifify me of the conflict and that can mean more than 30 emails per day... and on a long weekend which means 90 more e-mails to remove after it making sure it is the same 4 mac address having problems... How can I do that, go away

  Given that you are reserving DHCP addresses, I suppose that you have set the ATV to get automatically addresses. That should work.

  Are there opportunities that they are waking up on WiFi and Ethernet switching? On may switch from one WiFi network to another?

  Do you really need fixed IPs?

  The alternative to the reserved addresses would be to reduce the size of the DHCP pool and set the address, staticly ATV.

  Just by the way, have you given the names of different ATV? This is necessary for the Apple protocols.

  Can you identify the versions of your ATV, see identify your model of Apple TV - Apple Support?

• iPhone 5 s upper half part replacment could cause conflicts

  Hey guys,.

  I just replaced my phone i 5 s screen the whole screen (including the button "home", the front-facing camera, etc.) with another form of half original part another iphone 5s, broken for touch ID, I know that each ID contact could only work on original iphone, so despite Touch ID, could all thing in my iphone will have problems as the conflict could damage the logic boards and either Incidentally, I restored the iphone by itunes with the latest IOS and everything recognized in well except Touch ID

  I'm sorry. Your phone is unbearable now that it's been tampered with.

• Firefox is in conflict with pxhlpa64.sys

  (1) installed firefox 25 and auditor of race and got the 1st BSOD pxhlpa64.sys

  (2) installed run fix automatix and fix all clicked again.

  (3) restarted with the Auditor, got the 2nd pxhlpa64.sys BSOD

  (4) automatic fix does not resolve pxhlpa64.sys.

  (5) Firefox uninstalled, run the checker no. BSOD

  100000% sure for my conclusion that firefox is in conflict with pxhlpa64.sys.

  With firefox installed, two of my discs were read and write, but not safe for writing perfect.

  Fix it please I run win7 64 bit, registered.

  http://www.SevenForums.com/BSOD-help-support/295136-BSOD-restart-watching-DVD-incomplete-start-11.html#post2611617