Conflict of class during import

I have the ugliest ever created VI (and not by mysself) that I was tasked to maintain and modernize.  It's a quagmire, but it's a quagmire that works with a few minor exceptions.  It was written using LabVIEW 7.0.  One of my todos is to make it work under Windows 7.  To this end, as well as several bug in LabVIEW 7.0 that are well beyond the point of waiting for someone to maintain, I tried to import it in LabVIEW 2010.  I have a ' wire: class conflict "errors when the automatic upgrade that I can't figure out how to fix.  This is a reference to a tab control that is connected to an insertion in table VI.

Detail: You have connected a refnum of one type to a refnum of another type and both are members of a hierarchy of classes, but it is no a simple font or type cast between the two classes.

WARNING: the attached VI is the worst collection of screws which is not - do I care.  I'll remove it as soon as I solve this problem, because the pure embarrassment.

I thought about it myself.

1. create a constant to insert in table VI

2. use a constant as target to more specific class class VI

3. use the original property node as reference to the more specific class VI

4. disconnect the constant created in step #1, connect the output to more specific class VI

Huh, not alter or delete the original message.  Well.

Tags: NI Software

Similar Questions

  • Import and renamed photos during import in Photoshop elements 13

    Hello

    I have a bunch of photos and photo on my computer folders, in bulk inside a folder "images". Many of them renamed by myself (by hand, with texts of ads..) before making the acquisition of PSE13.
    I did the acquisition of PSE13 in order to restore order in all of this.
    My question: is it possible to import all this mass of photos and during import, rename pictures with, instead the name: the shooting date and time (yyyy. Mr JJ HHhMMmSS)
    I would also like to be able to put my old names of photos in the metadata in the "comments" box


    You have an idea how I could do this? And if PSE13 is able to do this?...

    Thanks in advance for your help,

    Good day!

    gaialyssa wrote:

    Hello

    I have a bunch of photos and photo on my computer folders, in bulk inside a folder "images". Many of them renamed by myself (by hand, with texts of ads..) before making the acquisition of PSE13.
    I did the acquisition of PSE13 in order to restore order in all of this.
    My question: is it possible to import all this mass of photos and during import, rename pictures with, instead the name: the shooting date and time (yyyy. Mr JJ HHhMMmSS)
    I would also like to be able to put my old names of photos in the metadata in the "comments" box

    What you want is available only if you are importing from a card reader, not your drive.

    -You can rename the model YYYY MM DD or more personalized in the advanced import dialog box. Scroll down completely to access the models 'custom '.

    -by default, the original name of the file is stored in the metadata (check that the box is checked).

    -You can even import into a date-based folder tree (folders named YYYY MM DD).

    So, you could fool the Organizer by copying your folders present on a large map and import from "camera or card reader.

    Creation of a date based folder tree is possible at the same time. You can import in several batches if the card is not large enough.

  • I've just updated to LR 6.2.1 and now I cant access the subfolders during import subfolder, hope that they address

    I've just updated to LR 6.2.1 and now I cant access the subfolders during import subfolder, hope that they address

    Hi Crobadus,

    Yes, this will be fixed in the next update.

    Until then, you can go back to Lightroom 6.1.1 if you need to have the same workflow

    Instructions to restore an earlier version of update

    Kind regards

    Claes

  • CC Lightroom is suspended during importation in early phase of construction Standard previews.  Blocks also up to 30 minutes during importation in early phase of DNG conversion.  Installed new CC LR there is less than a week.  Mac OS 10.9.5 help

    CC Lightroom is suspended during importation in early phase of construction Standard previews.  Blocks also up to 30 minutes during importation in early phase of DNG conversion.  Installed new CC LR there is less than a week.  Mac OS 10.9.5 help

    Thanks for your detailed post!

    You might consult import photos Lightroom CC | Adobe Photoshop Lightroom CC tutorials for a preview of the new import process.

    Here's a Thread that deals with the same Re: creation of previews from Lightroom 6 CC takes forever

    ~ Assani

  • How can I recover the function "back up photos during import" in Lightroom

    The function "back up photos during import" in Lightroom 5 suddenly disappeared. How can I recover this feature?

    "

    Do you have accidentally hide you the file management section... right click on any header (i.e. the renaming of files) and management of files is checked.

  • Receving error during import

    I do a full export in 8.0.6.0, and try to import in 8.1.7.4. When I start to import, I get this error. I exported using the SYSTEM user.



    Connected to: Oracle8i Enterprise Edition Release version 8.1.7.4.1 - Production
    With the partitioning option
    Jserver version 8.1.7.4.1 - Production release

    Export file created by EXPORT: V08.00.06 by conventional means
    import in WE8ISO8859P1 NCHAR character set and WE8ISO8859P1
    export server uses the NCHAR AR8MSAWIN (possible ncharset conversion) character set
    IMP-00017: statement failed with error ORACLE 4068:
    "BEGIN SYS. DBMS_REPCAT_MIG. PRE_IMPORT; END; »
    IMP-00003: ORACLE error 4068
    ORA-04068: current state of packages has been abandoned.
    ORA-04063: package body 'SYS. DBMS_REPCAT_MIG_INTERNAL"contains errors
    ORA-06508: PL/SQL: called program unit is not found
    ORA-06512: at "SYS." DBMS_REPCAT_MIG', line 95
    ORA-06512: at line 1
    IMP-00000: Import terminated unsuccessfully


    Please advice what is the problem.

    Thank you

    Recompile the said object and import

    You can use resumeable = y as to correct the error during import

  • Auto check all applications during import

    During a long import iTunes comes up with several issues that need to be automated.

    Examples

    (1) wma files are not imported. Instead, iTunes asks you if it should turn them in to m4u. So, after 3 hours of the import, the import stops at halfway, and I have to click Yes to import products. It's embarrassing. Of course, once it finished, I copy the converted files m4u (now 6 x size), throw the original of the AMM and replace them with the m4u, so it will not happen again. (if probably applies to other types of file, also, perhaps wmv, etc, I don't know)

    (2) Audible files are not imported without writing the email and password individually in each file. I've now separated all sound files out while this happen dozens of times in the middle of an import. This can be automated by adding an email and a password somewhere in iTunes from where he might catch the details, instead of asking for it.

    Yes, there are somewhere in the settings where I can disable these applications? Or automatically agree to each of them (Yes to all requests or something)?

    Or, as happens in the Solution Explorer, after upgrading from Windows XP to Windows 7, all requests are pushed up to the END of import, instead of dot as they turn to the top?

    THX

    Marmoset500 wrote:

    Yes, there are somewhere in the settings where I can disable these applications? Or automatically agree to each of them (Yes to all requests or something)?

    Or, as happens in the Solution Explorer, after upgrading from Windows XP to Windows 7, all requests are pushed up to the END of import, instead of dot as they turn to the top?

    N ° as with your audio content, a solution might be to organize your files .wma outside of the folder you are importing. Then import your .wma files at a later date. MediaMonkey is a nice tool called Auto organize files which, with the right settings, can be used to move a subset of your media to another path, but always organize sensitive artist & album folders. Alternatively, iTunes shows the folder where you have control over which of the formats of files are imported. Also note that when iTunes offers to convert .wma files imported it will do by using the currently selected import settings. If you have 128 k WMA, you probably want to choose 128 k mp3 or aac format target to avoid unnecessary bloat.

    See also the reflections on organizing your multimedia library where you need to use more than one player to support various formats iTunes & Windows Media Player to play well .

    TT2

  • can not find size_t during import a dll and calling a labview crash function

    Hello, experts

    I need to use FingerLakeInstrument DLL (see attachment) within Labview for talking to a CCD camera. It is built from microsoft visual studio C++

    I unzip FLI dll in my D:\proj\...\linfli-32 and import the dll from there. created a c:\FLIDBG.txt FLI dll must write the debug message on it if are called the FLISetDebugLevel() or others.

    During the import of the dll, the first thing I got is (IE size_t) could not be found. I installed the free version of microsoft visual studio C++

    but can not find 'typedef unsigned int size_t;

    in the end, I just added

    typedef unsigned int size_t;

    in the libfli.h. Having done this, I am able to import all the functions in Labview and have a library of user called libfli.

    However, as soon as I start to call a simple function in a test.vi, as FLIGetLibVersion (char * worm, size_t len), which consists of nothing else the library, the labview crash.

    I created a simple C test.exe who calls a lot of functions with no problems

    any suggstion?

    concerning

    Xiaofeng

    You don't have not shown us how the LabVIEW code looks like. The size_t setting refers to the length of the buffer, in that you spend. In this case you pass a string. So, presumably, you created a buffer zone in LabVIEW to a string of sufficient size, and set the parameter "len" to the length of this string. You also have to make sure you use the correct calling convention?

  • First Freezes / crashes during import & consistent - all better workarounds out there?

    Since the last CC update for the first I had the SAME problem on five different machines. During the import will freeze first, and I have to force quit smoking (mac) and reopen in order to correct. Sometimes it works, sometimes it doesn't - little matter HOW to import (media browser, file/import, and then drag from the finder etc...)

    Also, while in line first will freeze or hang on a clip and I have to save/restart so that the process pick up, where she had stopped. If I try to access the clips for confirming I'm risking clips (MP4 of C100 or of the C300) lack of large gaps in the audio.

    Finally. Once I am able to do import / in line, when editing, I'll open the files to see that many will not be load clips and show "media disconnected" when I try to play them (even if they show the poster frame when still. By opening and closing the first solved instantly.

    These questions don't are NOT material related such as the material has not changed on any computer. It is a software and it is the first which is the origin of the problem. They need to fix immediately. Our workflow is suffering of many man hours lost because of problems which do not arise until set CC to update the software.

    I tried to roll back and some questions were better, but others above were still visible. That save and reboot the software almost always solves the problem until the next time, there arises, makes me confident that it is a software problem. I ask first to do the same thing several times the same way, and sometimes it works, other is not.

    Someone has a workaround that is better than constantly economy/forcequitting/restart the software?

    OK - I figured out how to install the 2015.3 version. Under 'Find additional apps', I changed 'filter the apps' 'previous versions' and was able to select. It installs now - will update if it helps at all.

  • First crashed during import + ingest

    Hello
    I'm running the 2015.3 new and Premiere Pro crashed during the import process.  Media Encoder has been running in the background, but since he crashed, when I re - open the project, imported files are not in my browser because it crashed until I could save it after 'import' of the files.  I just want to know how I will bring to these files and make them properly related to the proxy file that encoder is already done?  I don't want duplicate proxies.

    Thank you

    It is a very good question - here's what I did.

    Disable (uncheck) interfere in the media browser.

    Import the main elements in the program Committee.

    Once imported, selected clips and a right click and the menu drop down choose Proxy > attach Proxy.

    When the pane to open, Proxy I sailed on the proxies and fasteners, and now the clips are with attached in the column metadata Proxy and work correctly.

    However I had to fix a clip proxy at once, for some reason any (I could have been hurt) reedit automatically, others did not.

    MtD

  • black screen appears during import file have?

    black screen during file import have

    Disable the GPU acceleration in preferences.

    Mylenium

  • Do not take into account the specific content during import?

    File > place > Windows (select "Show Import Options") > customize Style Import > Style mapping... >

    [MS Word Style: title 1 > > > Style InDesign: title 1]

    Question: How do I configure the resulting "InDesign Style: title 1 ' so that the CONTENT is either:

    (1) no imported in InDesign

    (2) deleted during the import process.

    (3) completely ignored by InDesign?

    Is this possible?

    If not, is there some type of script that could handle this, and where that might be?

    Thank you.

    Go in Edition > find/replace. Let the Search and change empty fields, click on the icon next to the section to find Format (circled in red in my screenshot) and when the Parameters of Format to find window appears, select the paragraph style. If you click Search, you will find the first bit of text style with this style. Click Edit, so this will change the text to what is entered in the field of the currency , which is nothing, it will remove the text. You can use any combination of find, find next, change, change all or Change/find to control what is selected and deleted.

  • Java Objs differ when classes Java imported forms several times.

    Hello
    I placed my jar in the java and same folder files added to the classpath and I import java Forms classes, and the stored Proc is then created, I do remove these created stored Proc and import the java the same jar file classes again, I see that in the stored Proc, there are random numbers linked to it for ex
    :
    myObject_9797 (,), or myObj_898 (-), that is why like this?


    Thnx,
    Subhash

    See using form builder for an explanation of "generate persistent names. The title in the doc is specifically "* understand the persistent naming Option."

  • What classes to import this external code?

    Hello

    I was wondering what classes I need to import into my outside like crowd to run the following code:

    public static var loader: Loader = newLoader();
    loader.contentLoaderInfo.addEventListener (Event.INIT, fontLoaded);
    Loader.Load (new URLRequest ("font.swf"));

    See you soon

    Shaun

    import flash.display.Loader;

  • 5 errors during import

    Hi all

    I get 5 errors when I import the DAC metadata tables.
    It seems that it is the following error message:
    MESSAGE: ORA-00001: unique constraint (CAD. W_ETL_SYSPROP_U1) violated

    Someone else has the same?

    I'm importer 11.5.10 eBS, eBS R12, Peoplesoft 89, 90 of Peoplesoft and the universal adapter
    Finance, projects, human resources and supply...

    I hope someone can help out me!


    Here are some of the log file:
    : CAUSE:
    MESSAGE: ORA-00001: unique constraint (CAD. W_ETL_SYSPROP_U1) violated

    EXCEPTION CLASS: java.sql.SQLException

    oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
    oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
    oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
    oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
    oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:216)
    oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:966)
    oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1170)
    oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3339)
    oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3423)
    com.siebel.etl.database.cancellable.CancellablePreparedStatement.executeUpdate(CancellablePreparedStatement.java:91)
    com.siebel.etl.database.DBUtils.executeUpdate(DBUtils.java:594)
    com.siebel.analytics.etl.database.ormap.PersistenceContext.save(PersistenceContext.java:864)
    com.siebel.analytics.etl.database.ormap.PersistenceContext.saveOrUpdate(PersistenceContext.java:912)
    com.siebel.analytics.etl.database.ormap.Session.saveOrUpdate(Session.java:135)
    com.siebel.analytics.etl.command.exportimport.ImportBeanCommand.writeListToDb(ImportBeanCommand.java:277)
    com.siebel.analytics.etl.command.exportimport.ImportBeanCommand.execute(ImportBeanCommand.java:150)
    com.siebel.analytics.etl.command.TrivialCommandExecutor.fire(TrivialCommandExecutor.java:104)
    com.siebel.analytics.etl.exportImport.ExportImportManager.importDacEntity(ExportImportManager.java:412)
    com.siebel.analytics.etl.exportImport.ExportImportManager.importAppIndependentDacEntities(ExportImportManager.java:371)
    com.siebel.analytics.etl.exportImport.ExportImportManager.importEntities(ExportImportManager.java:978)
    com.siebel.analytics.etl.client.view.dialog.ExportImportDialog.startCustomizedProcess(ExportImportDialog.java:552)
    com.siebel.analytics.etl.progressmonitor.DacProcessProgressMonitor$ DacTask$ WorkerThread.doInBackground (DacProcessProgressMonitor.java:198)
    com.siebel.analytics.etl.progressmonitor.DacProcessProgressMonitor$ DacTask$ WorkerThread.doInBackground (DacProcessProgressMonitor.java:196)
    javax.swing.SwingWorker$ 1.call(SwingWorker.java:278)
    java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
    java.util.concurrent.FutureTask.run(FutureTask.java:138)
    javax.swing.SwingWorker.run(SwingWorker.java:317)
    java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:885)
    java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:907)
    java.lang.Thread.run(Thread.java:619)
    2307 SEVERE Sun Jun 28 03:51:19 CEST 2009
    FAULT INFO: null: INSERT INTO W_ETL_SYSPROP
    (ROW_WID, VERSION_ID, LAST_UPD, NAME, VALUE, COMMENTS, DEFAULT_VALUE) VALUES (?,?,?,?,?,?,?)
    Values:
    KEY: 3
    VALUE: 2008-11-14 22:17:48.0
    KEY: 4
    VALUE: Without functioning
    KEY: 5
    VALUE: false
    KEY: 6
    VALUE:
    When set to true, this property runs the execution plan to generate just the tasks and the corresponding information.
    None of the tasks will be executed, and refresh dates will not be updated. Use only for debugging.

    KEY: 7
    VALUE: false
    KEY: 1
    VALUE: Without functioning
    KEY: 2
    VALUE: 1

    MESSAGE: ORA-00001: unique constraint (CAD. W_ETL_SYSPROP_U1) violated

    EXCEPTION CLASS: java.sql.SQLException

    oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
    oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
    oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)

    I confirmed via SR of Oracle, there is a known issue and can be ignored. I met in 7.9.6 and had any functional problems. There is a bug connected to Oracle and perhaps 7.9.6.1 will fix it.

Maybe you are looking for