Conflict of scanner HP software

Similar Questions

• Windows 7 in conflict with scanner Canon Lide 110

  To the right,.

  Our school has established that the Smartboard software is conflicting with Canon Lide 110 Scanner Software and Microsoft Windows 7. Logs of computer errors identified this problem according to Canon.

  The scanner Canon Lide 110 works with Windows XP and Win 7, but not with Windows 7 (when Smart interactive whiteboard software is installed)

  I must say that there is no problem with the Smart or Windows 7 software, as both continue to work regardless of Canon software or smart Technologies or not being installed. However, when the chip is removed the scanner Canon works on Windows 7.

  Have you ever had a similar conflict? You have all of the solutions that we have 12 smartboards in our school and we can act is more 12 scanners with Windows 7

  Concerning

  Sean

  Hello

  Thanks for asking this question to Microsoft Community.

  I understand that you are facing software conflicts with scanner Canon Lide 110. I'm sorry for the inconvenience caused to you.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.

  (1) is your computer on a network domain or work group?

  (2) how many computers is networked?

  I also suggest that you send the application in Windows 7 TechNet forums. Please post your question in this forum: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Thank you.

• Windows 7 problem with Kodak scanner i2420 - software Smarttouch

  Hello, someone had a problem with this kind of scan? On my desktop, there is a problem with smart touch, whenever I scan I have to restart or relog into a computer one then try again... Sometimes it works for a few hours, but sometimes I scan 1 or 2 pages and then stops scanning... The driver must have the connection, because there the scannner is a green arrow for connections... My computer is a HP and windos 7 Pro is instaled. I have checked the event viewer, but found nothing... I disabled the antivirus protection, but the problem is he stil... I know that this is not the right forum, I don't end protected by a kind of kodak support forum or something, maybe someone faced this problem?

  Thank you for your answer.e

  Hello

  Yes, you are right that this is not the right forum to ask about Scanner Kodak. If you were not able to find any support for Kodak forum so here are two links that might help you to achieve them and find answers to your questions.

  For the KODAK consumer product support

  Kodak FAQ

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Conflict with emulation software detected

  I installed Windows Vista Ultimate (32 bit), I installed one of my games called Sim City societies and I get the error message - conflict with emulation software detected.   I don't know what kind of program could be causing it. About 3 weeks ago, I installed this Windows Vista and installed correctly. All my other games work fine, t is right with this one I get the error message.

  Any help would be appreciated.

  Chuck

  I found some information for you. It is for more than a year since this information below was sent, they should have the problem resolved with an update now. Have you tried updating to the latest version?

  http://TheSims2.EA.com/mysimpage/blog.php?user_id=2612925&date=all

  (Text below was copied from this link).

  Sunday, February 3, 2008
  Electronic Arts has admitted there is a SecuRom issue, on the plateau of SimCity Societies and issued a URL where you can learn more on this subject. they know that there certainly is a problem.
  Worse still, Sim City societies totally sows as a product, that it also get error performance, which makes the game totally unusable. I bought today and I am back in the morning, because it does not load because of the error! More than half who buy the game cannot play because of problems with SecuRom or the runtime error!

  Here's a URL posted by a leader of Sim, their form of a master Maxoid/Sim:

  Author: SimLeaderSix profile
  Date: 22-Feb-08 04:17 PM PST (updated on 23-Jan-08 09:47 AM PST)
  Subject: Conflict with error message software emulation with Game Update #2

  Some of you receive a error message when you run the game after installing the #2 game update that says conflict with emulation software detected.
  We are aware of this problem and it will be corrected in the next game update (soon, with a lot of exciting things).

  Here's how to work around this problem and come back to play the game.
  1. find the icon of shortcut for SimCity societies on your desktop. Right-click on the icon and choose "Launch Analysis".
  2. you will be prompted by a message box asking if you want to start a crawl. Select "? 'Yes '. Note: Make sure that the disk is still in the DVD player.
  3 disc will turn upward and the analysis will begin. You will receive a second error of emulation. It is part of the analysis. Select 'Ok '.
  4. analysis file will be generated. The message tells you where to find the AnalysisLog.sro file on your hard drive. It also tells you to send an email to * address email is removed from the privacy *.
  5 Securom will answer you by email with instructions on the replacement of the simcitysocieties.exe file.

  You can find more information about this on our support site:
  http://support.EA.com/cgi-bin/EA.cfg/php/enduser/olh_adp.php?p_faqid=10703&p_created=1124384855&p_sid= $p_sid #secu
  in the section titled "other questions with SecuROM.

  We apologize for this inconvenience and will the be fixed in the next update!

• OfficeJet 7300: delivering during the installation of software of the printer/scanner for officejet 7300

  After you download and run the printer/scanner installation software, I get the following error that I can't solve. Note that the USB hardware is enabled in the BIOS and drivers are up to date. I tried all USB ports and they work all with different components, including keyboards, external hard drives, devices, bluetooth and other printers. Help, please.

  Error message:

  "This system does not meet one or more of the minimum requirements for the installation of this product. The installation cannot continue.

  Requirement:

  USB drivers

  USB device

  Detials and direction or requirement for USB driver:

  This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB.

  Required measures - click Cancel to exit this software installation. Order to intall this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers.

  Detials and orientation or USB Hardward requirement:

  This computer does not have the necessary support from the USB software to allow for the completion of an installation of USB.

  Required measures - click Cancel to exit this software installation. Order to intall this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers. If you are sure that your computer has the physical USB connectors, refer to the documentation on how to enable USB in the BIOS of your computer. »

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• Conflict between Toshiba Bluetooth Stack and drawers of power on Tecra M5

  There seems to be a bug in TosBtShell.dll and hope this alert could get fixed in a future revision. Possibly it will save others the effort that it has cost me to track down the problem on my Tecra M5 new. I had to give up Toshiba Bluetooth Stack and now using XP SP2.

  When the Bluetooth Manager is running, TosBtShell.dll updates the element ' Bluetooth' beside ' send to ' in the context menu of files and folders. Unfortunately it is in conflict with the shell software improvement Power drawers http://www.dynamickarma.com/powerdrawers.htm that I defer to speed up access to my files on the computer. This software allows you to right click on a folder to view its contents in a list. Then you mouse to any folder in the list and give him also as a sublist - and so forth as deeply as you want until you reach the folder or file you want. Right click on an item in the waterfall and you get a list of useful options. However, if the Bluetooth Manager is running when you do the right click, power drawers breaks down and you must close and re-open explorer.exe to recover.

  The conflict stops if you remove "to Bluetooth" in the context menu of files and folders. I proved this by using ShellExView from Nirsoft http://www.nirsoft.net/utils/shexview.html to disable the registry key "Bluetooth File extension" [sic]. This key is associated with the C:\WINDOWS\system32\TosBtShell.dll and the CLSID {6BEF3D0B-53F0-4b0d-B91C-C19ED3D4C9D1}. Unfortunately the registry key back again every time that you restart the Bluetooth Manager.

  David Tong.

  Hello

  Thanks for the information.
  However, on the Toshiba Bluetooth page you can always notice whether or not the new version of the driver BT is available.
  http://APS.toshiba-tro.de/Bluetooth/

  I recommend you to visit this site regularly

• Windows Malicious Software Removal Tool vs Malwarebyte Anti-Malware

  Explain the difference/other services/conflicts between Windows Malicious Software Removal Tool and Malwarebyte Anti-Malware.

  I currently use Anti-Malware in conjunctgion with KIS 2012.

  Hi RW,.

  Not precisely.  I say that the Windows Firewall is perfectly adequate, and I don't know any others that provide better protection (but others may have more options of configuration or bells and whistles, some will offer essentially equivalent protection, and some are not as good as Windows Firewall).  Of course, some will say that there are some firewalls that are better than the Windows Firewall, but is no longer a subject of debate and discussion than anything I saw firmly and convincingly demonstrated.  And we know that the Windows Firewall works properly with Windows and other Microsoft products and has great support.  And I never heard of software conflicting with the Windows Firewall, I heard things regarding 3rd party brands - involving mainly browsers, e-mail programs and security as well as configurations of network programs (not just internet, but internal intranet, you can have in your home using cables (, wireless routers/modems, infrared devices, bluetooth, remote deskop (internal or external) devices if used parental controls, interfaces with the security at home and/or surveillance systems wireless devices such as printers or scanners or fax machines and other similar things).

  Remember, without a firewall your computer give to anyone trying to access the system through any network or remote connection via the ports.  There are several ports, most average users never need.  The firewall blocks essentially all ports except those that are specifically excluded.  That's where you come in.  Each has a default list of excluded ports.  You must go through this list and remove all exclusions that you know you don't need (and be sure you KNOW what you have blocked before deleting the exclusion).  Each exclusion represent a hole in your security that an attacker could have access.  The less the better.  When I came through the list, I probably cut just a little less than 50% of registrants - but I cut some I used but rarely I would have rather the firewall blocks and make the extra effort to unblock port temporarily the few times that I need to leave open at all times.  Although for Vista, this article will help you understand the basic concepts of http://windows.microsoft.com/en-US/windows-vista/Firewall-frequently-asked-questions.   Attention to the last on the list because it provides links to other articles where you can get better and more information that can help you to choose and decide.

  I'm not going to argue here, since you have already the product and more.  This isn't what I would have chosen, but it is probably one of the best on the market suites and much, much better than some other choice, you could have done.  According to me, that it will probably do the job.  Quite simply, I don't know how good it is the Firewall works because I've never used this before then.  It may in fact be just as good and offer more features, or may not provide the same level of protection or cause any problems or conflicts with other programs or with your network (depending on how you setup).  I do not know.  You bought the suite because you wanted more features than just anti-virus protection.

  I think you can guess what I personally would do, but I can't advise you on what to do here - it's your software, your computer and your decision to make.  Don't forget that you can always disable the firewall in KIS and activate Windows Firewall (or the reverse), once you choose.  This comment in my post was directed at all the recipients and I didn't change it to you specifically - I mean not that it appear as more accurately you invites to spend now that you have already bought another product.  I was trying to say to people in general, he was no need to spend money on a separate firewall when the Windows Firewall has been excellent and would do the job perfectly well.  However, Windows Defender does NOT provide adequate and afflicted an antivirus program protection must be added (that may or may not turn off defender during the installation) to be sure.

  In short, the decision is yours to make.

  I hope this helps clarify things.

  Good luck and best wishes!

• Trouble updating windows malicious software removal tool, the download does not progress!

  Title says it all, during the update live my machine has been slain on 11% for almost an hour during the update to the malicious software removal tool. Any advice?

  Hi L Jaworski,

  What is the updated article?

  Restart your computer and turn on your computer in a clean boot State, and then try to update. Problem can be caused by a conflict of third-party software blocking the update process. Clean boot helps eliminate conflicts of third party software.

  Note: Follow step 7 to your computer as usual.

  A similar question has been considered by the link given below. Suggestion of PA Bear should help solve your problem.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c6027348-48a7-4c8a-90FC-c9cb98b92064

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• software hp scanjet 1000

  Good day to all,

  IM interested to buy the HP scanjet 1000 for helping me go paperless what im wanting to know is the software included in this "Naunce Paperport" which version it is and it is a trial version or full?

  Just an update... I bought the scanner hp1000... He was supplied with paper port 11 and 17 omni and a biz card application. I am very satisfied with this scanner. Even if it's a simple scanner power supply you can feed multiple sheets in a row. Even by hand its waaaay faster than my hp7500a not so all-in-one.
  Overall, I'm super happy with the hp1000 scanner and software, but not happy that I had to buy another scanner. To solve the end. Now, I'm on my way to go paperless in a fast and effective way.

• How can I me Wizard scan windows to recognise a scanner wireless

  I just bought a wireless scanner, epson software sees the scanner but scanner windows Wizard will not see it, y at - it something that I did not?

  Hi vendoman,

  ·         Do you see the scanner in the Device Manager?

  ·         What is the brand and model of the scanner?

  Try the following.

  Method 1: Run automated troubleshooting and check if it helps.

  Hardware devices do not work or are not detected in Windows

  Method 2: Download and install the latest drivers for the scanner. Log on to the Web site of the manufacturer for the same thing.

  See also:

  Microsoft Windows XP: install a scanner or digital camera

• I was using WIA in Photoshop Elements because of problems with my scanner HP ScanJet sudden 4200C window. With the help of my scanner HP through WIA worked very well. Now I have problems analysis with either WIA or the window of the HP scanner.

  When I finally tried to solve the initial problem scanner HP in resettlement of the disk to scan, I kept getting the message that it was not compatible with Windows 95 or 98. But I have Windows XP.  So I finally downloaded and installed scanner drivers, software and upgrades on HP website. Well, the works of scanner, but now there are new problems.  1 - once the hp scanner window is displayed by clicking on import through Scanner HP, most of the menu at the top of the window items is not available. For example, I go to settings and all that is now available is to scan in color. There are 5 other options I should be able to click on, for example, resolution.  And I need that.  I thought, no problem, I'll just use WIA as before, as well as the WIA window came much faster than the HP one.  Problem 2 - in elements, I can go to WIA, but it says "NO compatible WIA devices have been detected."  That's happened?  I tried to go into Panel, scanners and cameras, add a device... but he could not find the scanner and of course, he cannot read the HP disc because of the inconsistent message of windows 95-98 (on my Windows XP computer!).  Can - I just uninstall my scanner and if I make the WIA will be able to find it after that?  I do not understand how I could use WIA and now I can't.  I know it has something to do with that I downloaded and installed at HP, but what?  I hope someone can help.  I have a huge project that I'm trying.

  Hello Hotrodgrandma,

  Thank you for your message.  It seems that when you have downloaded and installed the driver from the HP website, you cannot have downloaded and installed the updates as well.  Click HERE to open the HP website and download the appropriate files.  Below, I will give an overview of what you need to download and install in order.
  1 ScanJet 4200C/Cse/Cxi PrecisionScan LT software/driver
  2 HP PrecisionScan LT for ScanJet 4200 c Scanner update. This update allows the parser to work under Windows XP.
  3. all three updates, in no particular order.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install drivers scanner clean desktop

  Original title: installation neat Desk scanner and software; specificately driver

  I took care of the Neat company office.  I'm running Vista 64. When I try to install the driver for the scanner, I get ".

  The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows install is not properly installed. Contact your support team. »

  I searched on the internet for ansewers, but have found no answer. Can you help me?

  Hello

  ·        Where did you try to download the drivers from?

  ·        Did you install and uninstall a program before on the system?

  It could be that the Windows Installer is damaged. I suggest you to download the latest version of Windows installed on the system. Click on the link below.

  Windows Installer 4.5 is available

  http://support.Microsoft.com/kb/942288

  To further support I suggest you to contact the manufacturer. Check the links below.

  http://www.NeatCo.com/support/calibrating-your-scanner

  http://www.NeatCo.com/home.aspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Canon Laserbase MF 3220 scanner/printer Toolbox

  I have a Canon Laserbase MF 3220 printer/scanner but have lost the installation CD. I downloaded the printer drivers so I can print but not the Toolbox full, so I can scan. My old computer has the Toolbox and it still works, but I would like to install the Toolbox on my new computer

  Hello

   
   
  Check the Canon Website and download the good Toolbox for your printer/scanner.
  http://software.Canon-Europe.com/products/0010359.asp
   
   
  I also suggest you to contact Canon support for support on this issue.
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer
   
  http://USA.Canon.com/Cusa/Windows_7?page_left_nav=division_1

• between source scanner for windows 7 64-bit usb

  I have an old scanner flat of intrescan which is the basis for the series. I recently bought a new pc with 64-bit Windows 7 as my old pc "pass away due to old age.

  the crash and unable to work. Until now, with the new pc, everything is ok. The problem is that I want to use the old scanner because it is in good condition.

  But it is a base of series. I got an adapter that connects the scanner to the computer. But the pc couldn't recognize the scanner and software. Try to find a software for the scanner via the net but not available.

  I hope you could help me find a way to overcome the issue that I still want to use the scanner of old rather than buy a new one, as always, the scanner

  function.

  Thanks /.

  If the manufacturer of your scanner does not provide drivers win7, then from a cost perspective, buy a scanner compatible win7 or all-in-one printer (there are other solutions, but there is a cost implication)

  USB - adapters series can be problomatic, if it's a desktop computer the best option is a pci serial card

• Recent problems of following Win7 failed to install software from Comcast

  Don't know where to start.  I can only suspect that all the problems are related to a single event and the more likely event, due to timing, has been a download, but Comcast Office software installation failed (automated in Comcast cable internet installation).  I suspect also that because only one sent to 'freeze' the problems here mentions conflict with the AV software and AV drivers may have been part of the package of Comcast.  Don't know.

  PROBLEMS:

  I can't uninstall the software.  Windows Installer "hangs" on "Preparing to install" and nothing happens.  I have to force close with the Task Manager.  Usually, that corrupts the images of my office, removes all the desktop icons and the Start button, forcing me to reboot.  (Near as I can tell, install the Manager affects Explorer.exe some how.)

  I can't install the software. The same problem. The program hangs indefinitely on "Preparing to unistall."

  After attempt to cancel install or uninstall events (default) after forcing the closure with the Task Manager, and after the Office covers without icons, the button start and the bar application (as if Explorer had closed, but froze on the chart in office), by withdrawing to the Task Manager to correct this, I chose the option "disconnect".  This allows me to disconnect and then reopen it in one.  However, once connected, I hit a black screen and the Task Manager shows a lot of applications is open twice in the list of open applications - and resident drivers.  It seems that the original 'disconnect' did not stop those apps, but the 'log back"repeated their.  It ends with a black screen every time and requires the computer to be turned off (where it crashes and then on the "shutting down" screen.)  See below.

  Restart or stop mode, closing blocks indefinitely. Occasionally, there is some disk activity hard, but in most cases, once it freezes, the hard disk is idle - but the computer does not move out of the blue 'Stop' window

  Microsoft Fix It will start, but will block indefinitely on "problems."  Review of activity in the the Task Manager, the program once hung in the "detection" uses no processor and record any activity. Rarely, the hard drive light flashes and doesn't show any use of research. Cancel will close the program without the need to force close with the Task Manager.

  04:00 - Windows Media Center to "optimize" attempts and crashes in the process.  The next morning, when found, WMC is frozen, will not respond to the mouse or remote control and must be forced closed in the Task Manager.  Once done, Win7 and WMC act normally unless specific other problems above.

  I also note that Microsoft Updates have been found and downloaded but haven't installed auto.  At least three recent updates are sitting waiting for my permission to install.  A Java Update yet, so.  Normally all these install automatically without my permission.  After an indefinite period, the close button appears that updates are waiting for a re-boot. I have allowed to happen once--sitting with a window "Please do not unplug or force close - update install" 9 hours - at work.  The machine was frozen.  No evidence of the update took place and all listed pending updates are pending.

  I run Microsoft Security Essentials and PC Tools Firewall more and feel confident that no virus does not cause this problem. If I were an academic assumption, the machine seems to block a lot of temporary programs who want to read or write to the hard disk.  But not all, as I stream video, record TV broadcast in WMC, use Firefox and Thunderbird - all without any problem.

  As I definitely want to remove the Comcast installs and a remote program of ESPN WMC get Windows Installer working properly is quite critical.  Wanting to use the program Fix It to review and fix registry problems is also strongly desired.  Here, your recommendations will be greatly appreciated.  Thank you.

  Phew!  What a ride.  But it seems that it's over.  Here are the details.

  Recovery always disc manufacturer's software on the open - so I couldn't do the disks.  All diagnostic HPs also hung on open software.  The HP site so their software were so any relief.

  I ran chkdsk /f and chkdsk/r with no problems found.  I ran the diagnostic memory of Win7 with no problems found.

  Because my last change encouraging (get the MSE to install a virus definition update) happened when I was able to stop WU Setup with "net stop wuauserv" I decided to try again.  It appeared to fail the first two attempts (each after a reboot), but by the fourth attempt and restarting, I managed to close.  The immediate change was amazing.

  However, another caveat.  At the time of the software of Comcast has failed, install the 10/26 and as the failure of the system, Flash and MSE updates began editing, I had also signed a 80 GB USB flash drive to the system. Read about similar problems with Windows 2000, I tried unplugging my LAN to see if it was the cause of the conflict.  (The LAN connection was started 10/26 - connecting the device to the router to Comcast).  There was no change.  I rebooted, I decided to unplug the 80 gig USB drive in case it was cause of conflict.

  OMG.  Either due to the success stops Installer WU of the unplug of USB or both-, I got a clean shutdown - no blocking.  Windows open in record time and as I began checking the integrity previously does not apps, MSE prompted me to fast and ripped analysis through completion in time record (I ran a full scan later without any result of virus.)

  I have considered a 'net start' but decided against it, as the machine was finally functioning normally.  The failure of the single application has been and continues to be: PC Tools Firewall.  Apps, I wanted to uninstall and other pending installation, all worked perfectly. Looking to restart, the listed stop one button update pending (not sure if it was a system) and that too worked without problem. A single update took 20-30 seconds and then stop without hanging up - as she had for more than a week.

  On the other 4 hours last night, the machine appeared to be back to work properly in all areas except PC Tools Firewall.  What had caused this wonderful series of problems disappeared - either because of the "net stop" or the removal of the 80 gig USB drive - or both.

  I have not restarted install WU by using "net start" and I have no immediate plans to do so. (As far as I know, it restarts after a few restart.)  I will check the State of system update soon and restart, if necessary.  But in getting my machine in perfect health, I will be slow to install WU get reactivated by me.

  Regarding the USB, I'll have to check on another machine.  I had used for port of some files on my machine (for portability) and do not need what he fixed permanently to this PC.  It worked without error during file transfer and I am unaware that she had no failures that could affect the PC.  Never the less, as disconnect seems to coincide with getting the health of my back of the machine, I won't be in haste to reconnect it.

  Thanks for your help.  Like I said, it was quite a ride.   But I think I'm out of the cold, dark woods and running with a sound machine once more.