Confused about hard drives external and ExpressCache 1.3.0 - Important.

Hi Slotmosta, George and GLS,

I'm a little confused...

I thought that 1.3.0 is supposeed to defragment only SATA disks (this should be an option!)?

I thought that the USB devices must eject normally - wasn't this problem?

When comes out the next ExpressCache software and * that * he will really be in trouble?

Kindly let me know.



It does not seem that this problem is related to defragment.

Tags: SanDisk SSD

Similar Questions

  • Portege R700-1hd: Questions about HARD drive replacement and passwords

    I have a 1hd R700 with 320 GB HARD drive in stock. I want to upgrade it to 500 GB. This update should be pretty simple, cloning from the old to the new.

    However, I was wondering about the HARD drive password / finger.
    My HARD drive it configured to use a fingerprint/password on boot - I guess that it is involved in the BIOS and the drive itself, but I'm not exactly sure how.
    I think the HARD drive itself is locked, it is not a Windows or BIOS password.

    If I change the HARD drive will still be able to use startup disk HARD password/fingerprint? Are there requirements for material of HARD drive I need to consider before buying new HARD drive? As should be a specific type of HARD drive to work with password disk HARD/fingerprint digital?

    Thank you

    Hi bullerd,

    The HARD drive password is stored on the HARD drive so when you replace the HARD drive you must set a new password of HDD in BIOS. The password is not stored in the BIOS. In addition fingerprints can also be stored on the HARD drive or let s say fingerprint digital software but all of the operating system must be installed after Exchange HARD drive so it s new problem.

    So the two passwords you mentioned are stored on the HARD drive so it s no problem to swap the HARD drive. :)

  • Satellite 230cx: Question about HARD drive, memory and CD recovery.

    Can someone tell me if I can get a recovery for a 230cx disk? And what is the max hard drive that I have and RAM.

    Thank you...


    Well, it is a very old unit. I think that it s about 8 or 9 years.
    However, I found the information that this unit has an internal memory of 16 MB and it of possible to upgrade the memory for max 144 MB (16 + 128MB)
    Also, this unit has been delivered with a 1.37 GB HDD part Nr.: P000229560
    I don t think you will be able to use a big HDD like 10 GB. The BIOS couldn't t recognize the HARD drive. Sorry but there is no information on the maximum size of HARD drive.

    The recovery CD, you must order the Toshiba service partner.

  • Apple TV, a hard drive external and HDTV (the trio)


    Please provide some assistance.

    I have a mid 2015 iMac 27-inch 5K retina and all my bought music CD and DVD installed on my external hard drive. The hard drive and iMac are connected. In my living room is a TV full HD (1080 p). I think buying the 4th generation Apple TV that comes with a USB - C (service & support) and HDMI ports. On my iMac, use the DVD player to play my DVD and iTunes to play my CD of music on the Apple web site, they say you have to get an HDMI cable.

    Q1. Is the HDMI cable for the Apple TV to HDTV or Apple TV for iMac.

    On the apple web site, they show the video formats such as H.264 / MPEG-4 (for example .mp4 and .mov file formats). My bought show DVD "vidéo DVD" printed on the disc. If I use airplay mirroring to display the screen of the DVD drive on the iMac...

    Q2. The DVD player and the movie will appear on HDTV?

    Q3. Do I need iTunes to play my music CD and ITunes will appear on HDTV?

    Q4. Can I avoid iTunes and play my music CD by selecting the song which is shown in Adobe bridge (part of the Adobe Photoshop package)? When I choose a song in Adobe, iTunes pops up and plays the song. In any case avoid iTunes.

    If there will be problems, and as an alternative, it would be better to do the following...

    To buy a bolt of lightning to the HDMI adapter and a cable HDMI (male/male) covering 30 to 50 feet (bypassing the baseboard) to connect the TV to the iMac. Use system preferences to the screen of the iMac on the HDTV in mirror and watch iTunes and DVD respectively. Are there problems using this road?



    Q1. Is the HDMI cable for the Apple TV to HDTV or Apple TV for iMac.

    Between the Apple TV and TV, the only link with the Mac is on a network.

    Q2. The DVD player and the movie will appear on HDTV?

    No block of Apple of his application of AirPlay DVD video (other DVD players are not blocked)

    Q3. Do I need iTunes to play my music CD and ITunes will appear on HDTV?

    The Apple TV 4 you will provide alternatives to iTunes, but yes, you can play your iTunes music via sharing of home on Apple TV

    Q4. Can I avoid iTunes and play my music CD by selecting the song which is shown in Adobe bridge (part of the Adobe Photoshop package)? When I choose a song in Adobe, iTunes pops up and plays the song. In any case avoid iTunes.

    I don't think not adobe bridge is available for the Apple TV, as I mentioned previously, there are alternatives, but I don't know why you want to use them, the alternatives are just messy IMO.

  • "Access denied" error on all hard drives external and MagicDisc

    I just purchased a Lenovo B575 running Win7 Home Premium and I'm very frustrated that I can't access my external hard drives, which are essential to my work. I get the error "Access denied" the normal start, but I'm able to use disks normally in safe mode. Here are some of the things I've tried:

    -Change the permissions/ownership after normal startup: does not work. Windows doesn't let me change the permissions or ownership, even if my single user account is set to administrator.

    -Change the permissions and ownership in safe mode: I found a solution online saying "Everyone" to add to the list of users in the Security tab. It works * temporary *, until I unplug my hard drives. When I plug back them, it's back to square one.

    -Install MagicDisc to access some files I saved in the form of ISO images: MagicDisc seems to work very well and load images normally... but also, I get the error "Access denied" when you try to open the drive in Explorer.

    -USB flash drives: same problem.

    -Other erratic behavior: one of my USB drives will not stop read/write as soon as I plug. I don't know if it's the McAfee antivirus analysis each of millions of files that I have on this subject, or if something else is happening.

    I had NONE of these issues on my old Acer and HP to my friend has no problem loading my readers. If I can't find a solution soon, I'll be forced to return this laptop that I need to access my work files.

    I lost my patience all yesterday and not the OneKey Rescue, restore my system to nine. Then, I named my new laptop of the same name that my old (relevant at all?). He immediately provoked a hard drive to work. The 750 GB it does not work yet, but I changed the permissions AND ownership to "Everyone" in SafeMode... now it seems to work correctly. No problem with other removable disks.

    That they are related or not, I have not initialized or changed some settings on the programs supplied with the laptop. My guess is that port Locker has something to do with the question I had - even if it has been disabled before. I'm uninstalling as I did not need. BioExcess, face recognition... everything goes down the drain. These should be optional, not enabled by default. Too many background services! I'm disabling a bunch of unnecessary stuff.

    Detective Conan?

  • I encrypted my files on a hard drive external and lost

    I encrypted my files on an external hard drive and I've reformatted my hard drive on my widows xp, now I get access denied when I try to access the files on my external hard drive. It can be recovered? I don't change anything on the external hard drive would have key codes have been stored on the actual computer or have it stored on the external hard disk where I have encrypted files? I change my username and password when I reinstalled xp.

    The "key" to your files encrypted using the Encrypting File System (EFS) is stored in your certificate store, which is part of your profile on the Windows system drive.  The certificate itself is encrypted to your Secure ID (SID, which is a unique number created with your username) and your password in the user and who-knows-what else.  Whenever you use any encryption system, if you can't answer the question "Where is my stored encryption key", then you are begging to lose all your information.  When you destroyed your old system, you wiped out the encryption with her key.  Unless you can recover your system from a backup or "best practices" followed by backing up your certificate, I'm afraid that you have lost access to all your data.  Microsoft has tried very hard and succeeds in making transparent encryption keys - at the expense of people in your situation.

    The following is required reading for anyone using EFS and he explains everything very well.  Pay special attention to the paragraph entitled 'Why you should back up your certificates' to the end.

    "Best practices for EFS file system.
      <> >

    For the same reasons you have at the moment, I chose to go with the "Truecrypt" freeware as an instead of the EFS encryption solution.  The keys are in my head like a password and I have not lost all data encrypted in 10 years despite having Windows terminally to the crash from under me several times.

    Sorry to break the news,

  • I recently supported my files on a hard drive external and then made a full destructive recovery but I am unable to restore files

    I backed up all my personal files to a hard disk of 500 GB. I then did a full destructive recovery and returned to the factory settings

    My computer is an ADVENT running windows vista home premium. Its a 1 gb memory 120 gb drive hard amd. I have'nt done one

    full destructive in recent years, so there are a lot of programs and personal documents I need to reinstall. Some can tell me if I

    Make a backup of error these files that I had used 50 GB of memory but the hard drive, I supported until it has only 11.6 gb zipped

    files on n it can help someone please

    I have a daughter that makes his exams and has vital information on the external hard drive.

    If I made a mistake of backup can I put files on a computer that is running windows 7 home Premium


    1. do you have backup data normally or by using the Windows backup feature?

    2. are you able to restore the data in your computer? If this is not the case, what happens exactly?

    Try the steps in this article.

    Restore files from a backup:

    Backup and restore: frequently asked questions:

    You can also try to save the data from the external drive on another computer and check if you are able to access the data.

    I hope this helps.

  • After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

    After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

    In the future more facts and less editorial help here

    SO now, we know all about how you feel but nothing on your system or your problem

    What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

    You cannot merge libraries without third party software - Photos of power can merge pictures libraries

    You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

    When you first launched the Photos it has migrated the last used for Photos iPhoto library

    I hope this will help, but to get specific answers, you need to provide real information and not feelings


  • HARD drive external, Toshiba PX1395E, not plug and play in Windows XP

    Hi all

    Thanks for reading this.

    Just bought a number of HDD 2.0 USB 750 GB external PX1395E.
    I want to use to back up files from my old computer to my new computer.
    In fact, my old pc recognizes the HARD drive (plug-and-play) and I already copied the required data.

    BUT: my new computer, with Windows XP Professional, Service pack 3. Does NOT recognize the HARD drive.
    I used several (versions 1.1 and 2.0) USB ports and everything is connected to the way that it should.
    Windows tells me that I have plugged 'something', but is unable to recognize what it is and I can't use the material.

    I think I need a driver to make this work. Site Web de Toshiba does not provide this particular driver (I checked, but it cannot find).

    Is there anyone with a solution?

    Thanks in advance.

    Do you see the HARD drive in the disk management?
    Control Panel-administrative tools-online-online disk management computer management online

    Another way is that reinstall you the chipset driver. Look at the Toshiba site to download and choose the right one.

    Look for yellow exclamation marks Device Manager.

    Let me know, what you're doing.

  • HARD drive external (E :) hangs and then said: "Not responding" when trying to backup.)

    Original title: backup on an external hard drive

    I'm trying to back up my files on an "External" hard drive It's me E: drive as the location, but it just hangs up there says "not responding". I tried to do an "Archive" in the "My Documents" folder, I saw files transfer, however all my names of my files are now blue in 'My documents' whatever that means? What drive letter should go a hard drive 'external '? I should be able to click on that drive and see what is on my external hard drive, but it doesn't "not responding"...

    External drive (E :) will not name until you give him one.  It is possible that the disk has not been formatted yet.

    Open disk management (start > run > diskmgmt.msc > OK).
    You will see something like this:

    You will have a line for 'Disk 2' but which shows next to your "disc 1". Please provide ALL information in the "Disk 1" line.

    For example, if you had the image above, the response from you I'm looking for would be:

    Disc 1 - Basic - 186,31 GB - online
    Ghost images (D :) - 93,13 GB NTFS - healthy (active))
    Data backup (E :) - 50,57 Go NTFS - healthy)
    42.61 GB - not assigned

  • iMac 21.5 "retina - HARD drive upgrade and / or install the Fusion drive?

    Hi all

    I recently bought a retina-iMac 21.5 "(fin 2015 obvs), without realizing it when I did so that it came with a slow hard disk 5400 RPM that will larn me - do your research the next time Cameron!" In any case, I'm trying to sell it, but my search for a buyer continues, I also try to establish - without much success until now - if a hard drive upgrade and/or installation of a fusion player any is possible. I am aware that the RAM in this model is not extensible.

    Any entry received with gratitude

    Although it is possible it is a company very difficult and will void any warranty future and Apple. Have you thought from the external drive Thunderbolt?

  • PC stopped recognizing 3.5 hard drive external Toshiba

    Hi all

    I have a 3.5/250 GB Toshiba hard drive external. I use Windows XP as my operating system and for some reason, my PC stopped recognizing saying 'USB not recognized '.
    It is supposed to be taken & play and I'm sure that I didn't have a driver, when I installed it.
    If anyone can help or has any suggestions, I would be grateful.

    Thank you


    Hallo Malc

    It is possible that you have removed the external device without using the option remove the device safely. Restart the machine and try again.

    Otherwise, you can remove all ports USB device manager and start option to add material on the list. After detection and installation it should work again.

  • HP Pavilion Notebook Hard drive question and OS reinstall

    I have a HP Pavilion dv4-2155dx Entertainment Notebook PC, series: CND0053PFN.

    I recently received an error message of the INTELLIGENT notification that a failure of the hard drive was imminent (I also had a flat battery as well, thank YOU HP!). I backed up my files to an external hard drive to COMPUSA, bought a new hard drive and installed. I inserted one of my computer come with recovery disks (HP or Best Buy made so I can't make new ones if I wanted to). After a minute or two of hearing the reader has read that I received an error "No Bootable disc - insert boot disk and press any key." Tried several times more. Reorganize the BIOS settings to make the drive to read first, no help.

    I then came here, looked at a few other discussions. They were no help. (this is a as I watched)

    I tried most of the things on this page, including download of the boot disk utility, but even after the creation of this disc, I still get the "No Bootable disc - insert the startup disk, and then press any key" error. I then put the old hard drive new, and played music CDs to ensure that my drive was reading. It did not work properly. He also burned a disc as well so I think it's OK.

    I tried to make an iso image to the new disk plugged hard upward with a USB connection and this is where I met another problem. My laptop said that there are only 98 GB available on the new drive connected by USB. It is a 250 GB drive.

    What can I do to get just my copy of Windows on the new drive, so I can use my laptop without fear of a hard drive failure in the middle of a test for the College or something like that?

    Thank you.


    I can't help with the problem of recovery disk, but if you can read the product key 25 character Microsoft Windows on the bottom of your PC, you can do your own installation of W7 (DVD or a flashdrive bootable) media.

    Here's how:

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.


  • Transfer Media Player on a hard drive external?

    I run XP and bought an external hard drive to my music collection.  Is it possible to transfer the Media Player itself on the hard drive external?  I'd rather play on Media Player on those of the drive, that there is none.  Choose a record and that's all that you can play at the same time; No shuffle or several artists in one sitting.

    Any suggestions, anyone?

    There is no need to transfer WMP itself hard disk external, WMP can perfectly handle music on other players.

    In WMP, please press F3 to display add it to the library, make sure that Advanced Options are displayed and add the folder music on the external hard drive in the list. Now, all the music on the hard drive will be added to the WMP library.

  • Unable to transfer data from the laptop hard drive external/pendrive.

    Dear Experts,

    Unable to transfer data from the laptop hard drive external/pendrive.

    Each time that tried to transfer meesage seems to the authorization of the administration.

    Kindly help me to solve the problem.



    Follow these steps and check:

    To take ownership of a folder

    a. click on the USB key you want to learnand then click on Properties.

    b. click on the Security tab, click Advanced and then click on the tab owner.

    c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    d. click on the name of the person you want to give to the property.

    e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

    f. click on OK.

Maybe you are looking for