Confused about the connectors SATA and mSATA on x230t

Similar Questions

• Confused about the extension of the Sprite class

  Howdy-

  I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.

  My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.

  I explored the Open Flash Chart code and note that the main class extends the Sprite class:

  Base/public class extends Sprite {}

  What this lets you do?

  Also, on a related note, how to draw, say, a line once I extended?

  Without extend Sprite I could write:

  var graphContainer:Sprite = new Sprite();

  var newLine:Graphics = graphContainer.graphics;

  ...

  And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:

  var newLine:Graphics = this.graphics;

  My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»

  A number of things.

  First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:

  public function Chart (width: Number, height: Number) {}
  This.Width = width;
  This.Height = height;
  put in a background invisible to this size:
  this.graphics.beginFill (0,0);
  this.graphics.drawRect (0,0,width,height);
  }

  There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...

  Then, after that, your chart should be functional...

  Then back in your scenario, you could do this:

  import graphics. Table;

  Stop()

  var myNewChart:Chart = new Chart (300,200)
  myNewChart.render ();
  addChild (myNewChart)

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• Confusion about the size of the array in Oracle 11 g

  There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:

  _____________________________________________________________________________________

  . . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568

  ____________________________________________________________________________________

  which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.

  But when I find the size of the table using the query:

  SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '

  He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.

  I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.

  Please get back with the answer to my query

  
  

  Concerning

  Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.

  John

• Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation

  Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
  I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)

  Thank you and best regards,
  Isabelle

  Hello Vero,

  You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:

  http://www.Oracle.com/technetwork/documentation/VM-096300.html

  You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.

  Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)

  Best regards

  Chetan

• can not display the webpage error something about the Server internal and 500 are down for maintenance

  can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message.  tried to restart and got the same answer.  Just set Windows to update when I logged on tonight.

  Hi ginnypierson,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.

  Before you start the troubleshooting steps, I need the information required

  1. what web browser do you use?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular website?

  Method 1:

  If you use Internet explorer, I suggest you to see link and check.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Method 2:

  I suggest you to see link and check.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Im confused about the security of my computer and its compatibility with my software anti spyware... StopZilla...

  My computer came with Norton Security.  I didn't like it so when it expired, I stop Zilla.  can I go ahead and remove the Norton program?  and StopZilla is compatible with the Windows defender and other security provided with the operating system.  Help... I am so tired renewal norton windows popping up all the time. Thanks for your help

  Hello

  To add the good advice of TG, you don't want two of the main antivirus on the computer products
  at the same time much less running. Don't forget to use the removal of the machine tools to prevent
  problem causing leftovers when you want to uninstall/remove an antivirus/security products.

  Norton - removal tool
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Removal tools
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Confused about the use of Fusion and boot directly to Windows via Bootcamp?  I thought that my installs would be synchronized?

  Recently, I installed Win 7 64 Ultimate using Bootcamp on my iMac 27 inches in 2010. It wasn't a problem. I then install Fusion 3.1 and import my install of Win 7 Bootcamp. Everything went well. I am using version VM to work related things which requires Windows and did not start directly into Windows for the first time, I installed and applied all the updates.

  Anyway, today I wanted to start Windows to the demo of a game. No much, that the installation of Windows seems work fine. But, I expected to see all applications and files installed there is just the way I did in the virtual machine. I thought they were basically the same facility and would be fully synchronized, but they are not.

  I'm doing something wrong or is it the way it is supposed to work?

  Is it possible to make two "versions" be the same whether in the machine virtual or kick directly?

  Because you 'imported' you see the expected behavior because an import is completely separate and apart and not linked to the original.

  On the other hand had you just clicked the button Start Up on Boot Camp entry into the library Virtual Machine, then you'd be using native installation as a VM.  However, a word of warning is in order that WPA (Windows Product Activation) can be problematic, Microsoft may require you to have two separate licenses and this is beyond the control of VMware when VMware Tools fails to control who after he activated in each environment.

• Confused about the capacity of the HARD drive on my new Equium L350

  I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.

  I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
  Any help would be appreciated.
  Thank you

  I agree with InvaderZim.

  But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.

  I assume you are using the Vista operating system.
  Vista uses hidden for some files from recovery partition.
  If you check the Disk Manager, and you should see all available on your HARD disk partitions.

  See you soon

• Confusion about the use of the tables [was: tables]

  I was told, at some point by someone, that the new web site design uses no tables. I'm so confused that I just read in the Help Guide of Dreamweaver Reference Guide, Chapter 5 page layout and Design, there is a whole section for tables. Many help sites, I was told that my site does not even because it is built in the tables. I built it using the ancient DW in 2002. I don't know which version, but the most recent version was Dreamweaver 4 back then. I am trying the trial of 2015, making many tutorials to learn the latest that has completely changed what I learned 14 years ago.

  So, what I can, or may not, use arrays? Please see the reference guide for DW 2015, 5 ml

  Thank you, Deb

  Oh, my site is mainemadestuff.com

  [Edited by moderator subject line]

  Dreamweaver reference Guide is desperately obsolete. Because Dreamweaver is now updated several times per year, new features have been added, but the old material has not been removed. For example, Chapter 5 contains 12 pages on executives. Dreamweaver can't stand frames.

  Advice than a website "shouldn't even work because it is built in the tables" are nonsense. Your site does not, and will continue to work for many years to come.

  The problem with the page layout using tables, it's that it is rigid. The content is not redistributed when the site is displayed on a mobile device. Tables is also bad for technology assistance for the blind. A blind person trying to access your site would have great difficulty of navigation on every page.

  Tables should be used these days for their original purpose: to display data, such as sports or statistical results in tables of trade. Modern web design uses CSS to control page layout and styles. But do not worry about your existing site stop suddenly work. Spend the time learning the latest techniques and reorganize your site when you feel more comfortable with CSS. But forget the so-called Dreamweaver reference Guide. It will be much more to enlighten confused them.

• Confusion about the requirements for the 2015 CC software

  I currently have Windows 8.0 (64 bit) which is so satisfactory and stable.  I have not upgraded to 8.1 Windows because I can't install same normal updates for Windows 8.0 without experiencing freezes system that only restore points can heal.  So for now, I would stick with what I have.  But the problem is the confusing requirements for various programs within the pile of creative cloud applications:

  Premiere Pro: Microsoft Windows 7 Service Pack 1 (64-bit) or Windows 8 (64-bit)
  Photoshop: Microsoft Windows 7 with Service Pack 1 or Windows 8.1

  Illustrator: Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows

  Dreamweaver: Microsoft Windows 7, Windows 8 or 8.1 Windows

  Hearing: Microsoft® Windows® 7 with Service Pack 1 (64-bit), Windows 8 (64-bit) or Windows 8.1 (64-bit)

  So what I'm confused about is the fact that Windows 8.0 is not listed for Photoshop, but Windows 7 and Windows 8.1 are.  Does this mean Photoshop CC 2015 is not compatible with Windows 8?  And that means that Premiere Pro is not compatible with Windows 8.1 since only 7.0 (SP1) and 8.0 are listed, I would have preferred the upgrade of software CC WITHOUT update Windows since I am picky on my installation of Windows 8 stable pipes now solid as a rock.  Fortunately, Illustrator, Dreamweaver, and hearing are compatible with all three, it seems.

  Can someone clear up the confusion, please?

  I think that my hardware is OK for this.

  Motherboard: Asus Crosshair Formula V-Z (AMD 990FX)

  CPU: AMD FX-6300 Vichera 3.5 GHz

  Memory: 16GB Kingston HyperX DDR3 2133 MHz

  Video: MSI N650-MD1GD5/OC GeForce 650MX

  Monitor: Acer S271HL of 27 "(1920 x 1080)"

  Power supply: Seasonic X-Series 1050W (SS-1050XM Active PFC F3)

  HDD1: Western Digital 320 GB (System)

  HDD2: Seagate SV35 Series (ST1000VX000 1 TB 7200 RPM 64 GB OEM)

  VidCap: Blackmagic intensity Pro HDMI

  USB hub: Rosewill RDCR-11005 5.25 "

  UPS: APC Back-UPS XS 1500

  Router: Netgear WNDR3700 N600

  System is NOT overclocked

  It is compatible but not tested.

• Confused about the new creative cloud

  Hi all

  Since I read adout the new creative cloud I'm confused about what will happen to my license for Adobe Lightroom. Will they remain still desktop apps as well or I have to pay for an annual license, if I want to use new versions of Lightroom?

  I am a casual photographer and I like to use Lighroom for my photos, but I don't think that pay for an annual license because I'm not spending a lot of time, image-editing.

  Can someone clarify this for me?

  Thank you very much

  Lucian

  5 Lightroom does not have subscription only, you're fine. There is no sign that it will even happen in the foreseeable future either.  It's just the ex-Creative-Suite that all talk.

  Target market of Lightroom is different from the Creative Suite/Cloud. CC is a good deal for the majority of its base of users (next door), while the majority signed without major complaints.  Lightroom has a huge customer base amateur, and they would be much more difficult to convince us to go subscription only. They would be likely to lose most of customers of Lightroom at the moment, and they are not completely stupid.

• Question about the Apple Watch and tattoos

  I think buy a Apple Watch very soon.

  I have a full sleeve (which is where I would like to wear the watch) and I wonder if it will cause problems with readings with the heart monitor since I want to use the Apple Watch for fitness training, mainly.

  I read on the page of the heart rate for the saying of Apple Watch:

  "Permanent or temporary changes to your skin, such as some tattoos, can also impact performance heart rate sensor. Ink, model and the saturation of some tattoos can block light from the sensor, making it difficult to get reliable readings. »

  There are other problems in addition to playback of heart rate on the Apple Watch for inked people that may know you?

  Thanks for your comments just to decide if this watch will really be for me before making this purchase, because I missed one for some time.

  If you are looking for, there was a very long discussion about this in the past, only shortly after the release of the Apple Watch. What I've read, it seems that the heart rate monitor is the only victim when it comes to the watch, since this is the only thing that requires the sensors to work through ink. Not all inks makes a difference, but most don't. The activity of exercise/app also uses the heart rate monitor to determine the rate for the year. You can take the time to go to the nearest Apple Store and try on the Apple Watch and see if the monitor works with your sleeve.

• Confused about the disk space with the photo library

  I understand that Photos uses hard links, and that therefore the photo library should not take much more space than the old Aperture library. But in a sense, I think that's not strictly true, and ' t actually takes this amount of space.

  My current photo library is 174 GB. The old library of opening that I imported in April is 155 GBs I have a couple of other files in images, representing perhaps 10 MBs. Finder reports my folder of photos using 330 GBs.

  Worse still, the disk hard integer (which is 500 GB) said I have only about 8 GB of free. When I look at the files that take the place, it seems that the GBs 330 is exact, so the vast majority of the use of the disk is duplicated libraries.

  I kind of thought maybe I had actually an extra GBs 155 or something, because old files of opening were now linked to the photo library. But this doesn't seem to be the case.

  Can someone explain this to me? I want to blow the Aperture library, because I have no intention to never use Aperture again, but I'm afraid that there are files in this library that have never in Photos, so duplication.

  Thank you!

  My current photo library is 174 GB. The old library of opening that I imported in April is 155 GBs I have a couple of other files in images, representing perhaps 10 MBs. Finder reports my folder of photos using 330 GBs.

  Storing hard linked files is reported incorrectly.

  This is because the hard linked files are identical to the original files, and so the storage is counted twice by the Finder.

  See: Six colors: the (hard) link between iPhoto and photo

  The library of Photos that is created from your Aperture library should have approximately the same size as the original opening library, but the image inside the library are stored on the same disk as the same pictures blocks in the original Aperture library.

  But once you start working with the new photos of library, more links will break for the preview images.  If you change a photo, a new preview will created, and who will no longer be linked to the preview in Aperture. It will be saved there less storage, so. Also, if you used a custom size for previews in Aperture, the new extracted in pictures will need extra storage.

  Or, if you use iCloud library synchronization with iCloud may break references.  Original on your Mac could be replaced by iCloud original during synchronization and verification duplicates.

  If you no longer use the Aperture library, move it to an external drive to free storage on the internal drive.  If you discover missing photos in the photo library, you can access the Aperture library on external drive as well.

  See this document on what kind of reader to use: use locally mounted volumes extended, Mac OS X for your Aperture library

• Confusion about the Source of excitement in the bridge SMU-4331 input module

  Hello

  I had some confusion through the input of the bridge SMU-4331 sheet module.

  In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!

  

  I think this should me Maximum current specification.

  If you look at the table below

  

  350 ohm resistance, the current should be 10V/350 ohm = 28.5mA

  but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.

  any thoughts?

  Kind regards

  Mirash

  Hello Mirash,

  I'm glad I could help!

  As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric.  This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale.  In this way, we can compensate for permanent changes in the voltage.  One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach

  See you soon,.