Confusion about the size of the array in Oracle 11 g

Similar Questions

• Confused about the extension of the Sprite class

  Howdy-

  I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.

  My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.

  I explored the Open Flash Chart code and note that the main class extends the Sprite class:

  Base/public class extends Sprite {}

  What this lets you do?

  Also, on a related note, how to draw, say, a line once I extended?

  Without extend Sprite I could write:

  var graphContainer:Sprite = new Sprite();

  var newLine:Graphics = graphContainer.graphics;

  ...

  And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:

  var newLine:Graphics = this.graphics;

  My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»

  A number of things.

  First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:

  public function Chart (width: Number, height: Number) {}
  This.Width = width;
  This.Height = height;
  put in a background invisible to this size:
  this.graphics.beginFill (0,0);
  this.graphics.drawRect (0,0,width,height);
  }

  There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...

  Then, after that, your chart should be functional...

  Then back in your scenario, you could do this:

  import graphics. Table;

  Stop()

  var myNewChart:Chart = new Chart (300,200)
  myNewChart.render ();
  addChild (myNewChart)

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation

  Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
  I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)

  Thank you and best regards,
  Isabelle

  Hello Vero,

  You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:

  http://www.Oracle.com/technetwork/documentation/VM-096300.html

  You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.

  Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)

  Best regards

  Chetan

• I have a question about the functionality of Oracle Identity Manager...?

  Hi friends
  I have a question about the features of Oracle Identity Manager.
  Here's my question:
  Self-management is possible network passwords (reset / unlock) with Oracle Identity Manager 9.1.0.2
  
  Very grateful.

  What Kevin suggested this means that you are managing accounts and their password by IOM. If your condition is the same then follow:

  Re: error during password reset using the self-service portal

• Confused about the capacity of the HARD drive on my new Equium L350

  I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.

  I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
  Any help would be appreciated.
  Thank you

  I agree with InvaderZim.

  But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.

  I assume you are using the Vista operating system.
  Vista uses hidden for some files from recovery partition.
  If you check the Disk Manager, and you should see all available on your HARD disk partitions.

  See you soon

• Confusion about the requirements for the 2015 CC software

  I currently have Windows 8.0 (64 bit) which is so satisfactory and stable.  I have not upgraded to 8.1 Windows because I can't install same normal updates for Windows 8.0 without experiencing freezes system that only restore points can heal.  So for now, I would stick with what I have.  But the problem is the confusing requirements for various programs within the pile of creative cloud applications:

  Premiere Pro: Microsoft Windows 7 Service Pack 1 (64-bit) or Windows 8 (64-bit)
  Photoshop: Microsoft Windows 7 with Service Pack 1 or Windows 8.1

  Illustrator: Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows

  Dreamweaver: Microsoft Windows 7, Windows 8 or 8.1 Windows

  Hearing: Microsoft® Windows® 7 with Service Pack 1 (64-bit), Windows 8 (64-bit) or Windows 8.1 (64-bit)

  So what I'm confused about is the fact that Windows 8.0 is not listed for Photoshop, but Windows 7 and Windows 8.1 are.  Does this mean Photoshop CC 2015 is not compatible with Windows 8?  And that means that Premiere Pro is not compatible with Windows 8.1 since only 7.0 (SP1) and 8.0 are listed, I would have preferred the upgrade of software CC WITHOUT update Windows since I am picky on my installation of Windows 8 stable pipes now solid as a rock.  Fortunately, Illustrator, Dreamweaver, and hearing are compatible with all three, it seems.

  Can someone clear up the confusion, please?

  I think that my hardware is OK for this.

  Motherboard: Asus Crosshair Formula V-Z (AMD 990FX)

  CPU: AMD FX-6300 Vichera 3.5 GHz

  Memory: 16GB Kingston HyperX DDR3 2133 MHz

  Video: MSI N650-MD1GD5/OC GeForce 650MX

  Monitor: Acer S271HL of 27 "(1920 x 1080)"

  Power supply: Seasonic X-Series 1050W (SS-1050XM Active PFC F3)

  HDD1: Western Digital 320 GB (System)

  HDD2: Seagate SV35 Series (ST1000VX000 1 TB 7200 RPM 64 GB OEM)

  VidCap: Blackmagic intensity Pro HDMI

  USB hub: Rosewill RDCR-11005 5.25 "

  UPS: APC Back-UPS XS 1500

  Router: Netgear WNDR3700 N600

  System is NOT overclocked

  It is compatible but not tested.

• Confused about the new creative cloud

  Hi all

  Since I read adout the new creative cloud I'm confused about what will happen to my license for Adobe Lightroom. Will they remain still desktop apps as well or I have to pay for an annual license, if I want to use new versions of Lightroom?

  I am a casual photographer and I like to use Lighroom for my photos, but I don't think that pay for an annual license because I'm not spending a lot of time, image-editing.

  Can someone clarify this for me?

  Thank you very much

  Lucian

  5 Lightroom does not have subscription only, you're fine. There is no sign that it will even happen in the foreseeable future either.  It's just the ex-Creative-Suite that all talk.

  Target market of Lightroom is different from the Creative Suite/Cloud. CC is a good deal for the majority of its base of users (next door), while the majority signed without major complaints.  Lightroom has a huge customer base amateur, and they would be much more difficult to convince us to go subscription only. They would be likely to lose most of customers of Lightroom at the moment, and they are not completely stupid.

• confused about the function of culture

  OK I've been using photoshop for a while but it has the function of culture changed?  My question is, when I crop a picture, even though I have crops on a very small section, the file remains the same size (pixel dimensions).  If an image is 60 m and I have very small crops, it remains 60 M and 5616 X 3200 pixel, for example.  I'm a bit confused by the present, I'm sure that when I have cultivated an image before it reduces when I cultures.  I hope that I myself make clear...

  any help appreciated.

  
  

• Confusion about the Source of excitement in the bridge SMU-4331 input module

  Hello

  I had some confusion through the input of the bridge SMU-4331 sheet module.

  In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!

  

  I think this should me Maximum current specification.

  If you look at the table below

  

  350 ohm resistance, the current should be 10V/350 ohm = 28.5mA

  but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.

  any thoughts?

  Kind regards

  Mirash

  Hello Mirash,

  I'm glad I could help!

  As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric.  This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale.  In this way, we can compensate for permanent changes in the voltage.  One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach

  See you soon,.

• Confused about the location of TDE wallet!

  due to
  
  http://www.Oracle.com/technology/oramag/Oracle/05-Sep/o55security.html
  
  I guess to add the following lines to sqlnet.ora if I want to change the default location of the portfolio to the orawall folder:
  
  ----------------------------------------------------------------
  ENCRYPTION_WALLET_LOCATION =
  (SOURCE =
  (METHOD = file)
  (METHOD_DATA =
  (RÉPERTOIRE = / orawall)))
  ----------------------------------------------------------------
  
  I just confused of the last line that describe the path of the portfolio... I mean I do not understand where assumes that this location * / orawall * exist on my computer, why he wrote the full path?

  This is the full path to the wallet. I suppose that the example of Arup uses little flavor of Unix, it has no doubt created an ORAWALL directly from the root.

  You can store the wallet in any directory that you have chosen. Typically, you would choose $ORACLE_BASE/admin / $ORACLE_SID/portfolio. On my Windows machine where I have a database with the SID jcave11gr1, who would be

  ENCRYPTION_WALLET_LOCATION =
    (SOURCE =
      (METHOD = FILE)
      (METHOD_DATA =
        (DIRECTORY = c:/oracle/admin/jcave11gr1/wallet)
      )
    )
  

  Justin

• Confusion about the factor of grouping of information of value

  Hi do not receive the explanation of an execution plan.
  Need your help...
  
  In our system, we have a table Tab_All_Trades
  
  Here are the statistics for this table:
  
  table name: Tab_All_Trades
  nom_tablespace: TS_X1
  status: VALID
  PCT_FREE: 10
  ini_trans: 1
  max_trans: 255
  INITIAL_EXTENT: 524288
  max_extents: 2147483645
  logging: YES
  Num_Rows: 52690179
  blocks: 958424
  surveillance: YES
  
  This table has no primary key, but only one index: idx_Tab_All_Trades with clusters factor 3104105
  
  But when I ask the columns in the index of the table without anywhere condtn., it's an full instead of a table scan analysis index full fast.
  
  SELECT TAT_1, TAT_2, TAT_3, TAT_4
  OF Tab_All_Trades
  
  SELECT STATEMENT, GOAL = ALL_ROWS 211325 52690173 3266790726
  TABLE ACCESS FULL 211325 52690173 3266790726 Tab_All_Trades
  
  Why it's happening this way?

  Lucky Luke Mukherzee wrote:
  Hi do not receive the explanation of an execution plan.
  Need your help...

  In our system, we have a table Tab_All_Trades

  Here are the statistics for this table:

  table name: Tab_All_Trades
  nom_tablespace: TS_X1
  status: VALID
  PCT_FREE: 10
  ini_trans: 1
  max_trans: 255
  INITIAL_EXTENT: 524288
  max_extents: 2147483645
  logging: YES
  Num_Rows: 52690179
  blocks: 958424
  surveillance: YES

  This table has no primary key, but only one index: idx_Tab_All_Trades with clusters factor 3104105

  But when I ask the columns in the index of the table without anywhere condtn., it's an full instead of a table scan analysis index full fast.

  SELECT TAT_1, TAT_2, TAT_3, TAT_4
  OF Tab_All_Trades

  SELECT STATEMENT, GOAL = ALL_ROWS 211325 52690173 3266790726
  TABLE ACCESS FULL 211325 52690173 3266790726 Tab_All_Trades

  Why it's happening this way?

  Because a full table scan is the fastest way to get all the rows in the table. Oracle would have to do twice as much IO (at least) If you use the index (first reading all the index blocks and then all data blocks.)

  Full scan of the table are not always bad, as well as the indexes are not always good...

  Johan

• confusion about the block size

  Hello
  I doubt very simple but fundamental, I really want to know what exactly is the block size, now my confusion is to say we have 100 members in account dimension (all are store) which is dense, and we have dimension period with 18 members, who is also dense.now on 100 members account only 50 of them have values stored in them so that the size of the block will be 50 * 18 * 8 , or will it be 18 * 100 * 8
  
  Thanks in advance

  The size of the block is constant, regardless of the data.

  The density of this block varies with the data.

  The storage needs of the blocks on the changes to disk with the density of the block.

  Kind regards

  Cameron Lackpour

• Confusion about the use of the tables [was: tables]

  I was told, at some point by someone, that the new web site design uses no tables. I'm so confused that I just read in the Help Guide of Dreamweaver Reference Guide, Chapter 5 page layout and Design, there is a whole section for tables. Many help sites, I was told that my site does not even because it is built in the tables. I built it using the ancient DW in 2002. I don't know which version, but the most recent version was Dreamweaver 4 back then. I am trying the trial of 2015, making many tutorials to learn the latest that has completely changed what I learned 14 years ago.

  So, what I can, or may not, use arrays? Please see the reference guide for DW 2015, 5 ml

  Thank you, Deb

  Oh, my site is mainemadestuff.com

  [Edited by moderator subject line]

  Dreamweaver reference Guide is desperately obsolete. Because Dreamweaver is now updated several times per year, new features have been added, but the old material has not been removed. For example, Chapter 5 contains 12 pages on executives. Dreamweaver can't stand frames.

  Advice than a website "shouldn't even work because it is built in the tables" are nonsense. Your site does not, and will continue to work for many years to come.

  The problem with the page layout using tables, it's that it is rigid. The content is not redistributed when the site is displayed on a mobile device. Tables is also bad for technology assistance for the blind. A blind person trying to access your site would have great difficulty of navigation on every page.

  Tables should be used these days for their original purpose: to display data, such as sports or statistical results in tables of trade. Modern web design uses CSS to control page layout and styles. But do not worry about your existing site stop suddenly work. Spend the time learning the latest techniques and reorganize your site when you feel more comfortable with CSS. But forget the so-called Dreamweaver reference Guide. It will be much more to enlighten confused them.

• Confused about the new iPhone to load

  It seems that online, there are many variations on how to charge an iPhone the first times, we don't know what to believe.

  Historically, I charge my iPhone for a day the first time that I get it or after I got a refurb from Apple. My battery life has always been fantastic, representatives of engineering apply even told to say.

  This time, I couldn't wait to load the device as I normally would. I connected my iPhone to my PC, did a restore of backup and wait for the iPhone to be able to load completely (about 30 minutes).

  Given that I had a lot of things happens, I didn't have the opportunity to "condition" of the battery, charge of the day to the next, or as some reports say that I have to load it only via the provided OEM charger (not PC). Some say that your battery die completely and then get away after the phone two hours before recharging.

  All these 'new' information is downright confusing. And yet, I see Apple suggesting as a result a large part of these 'tips '.

  Any thoughts on pricing?

  There is no requirement to 'manage' load.

  Charge at any time, for any period of time.

  You can use the phone while charging.

  Don't deplete the battery at a low level.

  Another that these steps, no more measures need to be taken.