Confusion of mast...

Similar Questions

• I ask the improbable?

  I'm starting to believe that I ask my Photosmart HP 7520 the improbable.

  Topography: HP Media Center PCm7177c running MS Windows XP Media Center Edition Version 2002 Service Pack 3

  PC is connected via a CAT5 cable for a century link DSL Modem / Router capable of wireless communication which is connected to a router to accommodate the different computers in the House.

  Because they said that they could... the family of course wanted to use wi - fi modem with their smart phones.

  Then I used the printer setup and it's 'Wireless' and the status and the doctor HP ALL are awesome!

  Now what I THINK is the problem: I said I have the printer set up as 'Wireless', but I ALSO have the running back USB cable to the PC.

  Problem: Despite any test 'PASS' we can't print acceptable computer!

  We can copy.

  But if it involves an impression, it's EXCESSIVELY like UNreadably of LIGHT!

  The kicker: it ALL worked when I installed it in the first place! It is printed, he did everything... so... no!

  What's happening in the... I can check?

  Back to my theory: I think the question is - must be the USB cable or wirelesss DO NOT both. Since my old PC knows nothing of all this wireless one speaks of--he NEEDS cable companies to print, right?

  Help! HP technical support has been frankly less than helpful...

  I am NOT a HP technician.

  I'm used to be... a fan of HP. Then I brought this printer 7520e in my life and unfortunately... known HP phone and chat 'medium '.  Maybe I need therapy... YEARS of her...

  Bottom line and it is based SOLEY on my painful experience and the total lack of famiarity / has the technical ability to HP Technical Support with the Photosmart 7520e printer!  I am referring mainly to my painful phone calls and chat sessions, NOT so much this forum... Although there is confusion in master here also!  Maybe if HP DOCUMENTERAIT and TEST their products? Suffice it to say...

  The 7520e can't (successfully) the TWO SUPPORT WiFi and USB!

  Oh sure, he CAN DO either, but if you try to connect the two simultaneously and have the two assets, you too can have great pain and anguish!

  The previous suggestion of hard starting, is TEMPORARY difficulty to reslove your printer lost and confused, after having two connection options to the top at the same time!

  Pick one, run with it, when you want to run the other... plug it in, consider that hard boot!

  Meanwhile HP: give me BACK my CAT5 option!

• Custom installation of Windows 7 Pro takes too long

  Well, last night I was installing Windows 10, where first steps easily on the past, as in 30 minutes the computer rebooted and reached the point of preparation, with pimples circling above the line. But in the meantime Windows to boot completely, thinking that it won't be more than a few minutes, leave the laptop on battery, I fell asleep, as I was so tired. I woke up this morning to find the computer turned off. I started it. Dotted circles appeared and after some time the dialog box, to show something like "computer is suddenly off, so that Windows cannot continue the installation.

  No problem, I thought, however feel bad.

  • I restarted the facility, the same box appeared.
  • I took the car and formatted the 469 GB primary partition, formatted the partition, MBR, revived the installation, the installation process ran more slowly than ever, everything as it was when I tried to install Windows 7.
  • I took out the disc and deleted all the partitions by using the Partition Wizard, revived the installation, the same. horribly slow. Now more than an hour has passed, and he exceeded not copy files.

  I try to keep my wits about me, as I wonder whatever happens, whatever the change, happens to the configuration of the hard disk!

  I would really appreciate if someone told me exactly how to prepare a hard drive for the custom, clean installation of Windows?

  • Here, I created a partition MBR before or during installation?
  • If Yes, then what is the size? (I think that 100 MB is standard)
  • If so, then in NTFS or FAT32?

  I can't really understand why the installation process changes the way it works.

  Is it possible that the information are rewritten on the installation media to cause this?

  I'm asking questions, but I am open to any suggestions!

  Thank you

  You confuse the Master Boot Record (MBR): https://technet.microsoft.com/en-us/library/cc976786.aspx

  with a score, they are not the same.

  A new fresh out of the box has no MBR and no partitions. Connect it to your computer as a second drive and you will be prompted to 'Initialize' the reader. Initialization creates the Master Boot Record (but not partitions). When you install Windows partitions (C: Windows and system partitions are created). The system partition is for Windows 7 150 MB (very small partition that contains data for Startup Configuration that needs to load Windows), the Windows C: partition occupies the space remaining on your hard drive. The exceptions are HP, Dell factory installed systems, Etc. which additional scores.

  

  So if you want to start again simply remove all the partitions that Windows created 10, the Master boot Record (MBR) will remain in the tack room.

  J W Stuart: http://www.pagestart.com

• Should where I use in a dmx sitemap?

  I downloaded the Google Sitemap Generator DMZ.

  My problem: I have a lot of Web sites set up in my accommodation, using several files for each Web site location.

  When I set up the site server in DW I usually use the IP ftp address and the name of the folder in the directory root.

  Example of installation of server:

  Site is samplesite.com, but I don't use that in the configuration of the server.

  FTP: 111.11.1.1

  Root directory: exemple_dossier

  Then the line url of web in the server window looks like this: 123.12.1.1/samplefolder/

  When I generate a sitemap, it uses 123.12.1.1/samplefolder/ as the location - < loc > rather than the domain name of the Web site.

  Is this right?

  I got this configuration when I had problems to use the Internet domain under the ftp address. And http://samplesite.com/samplefolder/ didn't make sense to me in the web of the installation of the server url line.

  Altogether. Do not confuse your master account with different names of accommodation.

  Even if you manage several websites, if you have different domain names for each of them, your sitemap must point to the name of the parent domain. It will work fine.

  In fact, even for your FTP server host info, you can actually use individual domain names - that work very well. You can try it for one of your domains. Easier, instead of set up by using an IP address for the master or master domain and adding a "subfolder" the web path.

• Setting master password. Confused.

  People,

  I'll put it out there:
  "Master password"

  I read that it is desirable to have one, for if a person / thing to access your stored passwords.

  Granted.

  If you define a "master password".

  So I load FF and one of my web pages is "pinned" - my g-mail account.

  I also have the 'usage meter"showing me how much of my monthly allowance I used.

  Loading the page of g-mail.
  The netusage doesn't.

  So I RMB on it and say "update its use" and I am asked to enter the "master password", enter it and the gauge is updated.

  But to me, you can ask the question:
  How to load the page g-mail if passwords are locked by the master?

  OK, maybe the cookies, but I just want to put out there coz I'm obviously missing something.

  Thanks in advance.

  Details such as websites to remember you (automatically log you) are stored in a cookie.

  You must either disconnect manually before closing Firefox or disable cookies from Google (Gmail).
  Note that if you leave tabs open that restore the Session can save these cookies as part of the data session, so leave the cookies expire when you close Firefox does not work.

• Head / Work Flow / Master Page confusion

  Hello ,.

  I think that I am not understand a basic concept here with regard to the workflow.

  I have installed a new Master Page in the Document that contains a head on one side and it imported into Document B.

  When you work with the new Page Master Document B, I decided that the head side had to be larger.

  I go to a Master Page view and then choose Format > Page layout > column... layout I get the following warning:

  

  I click OK and get the following warning:

  

  The column layout box and I can change the width of the head to one side but, as defendants, only the Page of Master of law is changed.

  How do I change the Master Page imported and what term I don't understand?

  Once A Doc formats are imported into Doc B, there is no other connection between the two, then, really, that's about Doc B.

  On master pages, change each of the Masters using the Panel object properties and you should be good.

  IIRC, the Format > Page Layout > column layout works more consistently when your cursor is in the main stream on the pages of body.

  Now that you have noodled with the masters and order of column layout, you may need to change the steps a little, but it shouldn't take more than a few minutes.

  -Matt

• Confused about A-master and layouts

  Hello

  I was recently told that it is best t layout pages helps A-master and not facing the ticked page.

  When I did I was present with a Virgin 2 page document which I presented my work. I had a problem when it came to print, as would print only one page.

  Throighout my workflow it will always take a box that remains in the same position in all the new pages/document and it is a title with my name etc. block. I highly doubt I'll keep the same layout each time.

  What would be the best way to save a layout for this? And what exactly is A-master?

  (I looked at a few tutorials, but they did not really help)

  Thank you

  A model is an entire document. It can have one or more pages and these pages can be based on the same or different master pages. Models can have predefined styles and shades, as placeholder or actual content that you want to use again and again.

  Master pages are templates to create pages in a document. You use them to set the margins and guides (if you want to repeat on multiple pages guides) and position all the items that will be repeated on several pages, such as the header, footer, page numbers, etc.. You can also use them to apply a rigid structure layout of magazines and similar publications. Any content placed on a master page will be visible on all pages in the document that are based on this basic form. If you create a master of two pages, and pages change aside on a facing pages document, the main content will be amended accordingly.

  New documents made not from a model have two default master pages: no and A-master. You can not edt no master, who is white, except for the margin guides that correspond to the preparation of the document. A-master will begin in the void, but can be changed. If you want to have content that is repeated across many documents you need create a model. If you just want to implement many documents that share size and page margin settings, but do not need content, create a document preset.

  Peter

• I use SyncToy 2.1 for syncing between two readers and I wonder if it is possible to synchronize three discs without causing confusion for SyncToy.

  Hi all, I use SyncToy 2.1 for syncing between two readers and I wonder if it is possible to synchronize three discs without causing confusion for SyncToy. In other words, I want to have a (portable) master and synchronize with a Home Office and a disc of office disc.

  Original title: SyncToy 2.1

  Hello

  Thanks for posting your question on Microsoft Community!

  After your description, it seems that you need more information about SyncToy 2.1.

  I would like the season help you post you question on the following link for better.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  I hope this helps!

• Model master synchronization

  I have model master installation with several different breakpoints. I found that these breakpoints does not seem to be sync / appearing on each individual Web page, but rather all simply appear on the master model.

  Each separate web page I created is assigned to this master model so I'm really confused as to why each page will not inherit the breakpoints from the main template. Advice please?

  Muse does not automatically add breakpoints, you can use a single master for several different pages where breakpoints may need to be adjusted or ignored. Instead, he places markers along the bar of breakpoint that represent those established in the master. All you need to do is click on the marker and set a breakpoint.

  

  David

  Creative muse

• Help guys... CS3 Master Collection of Win7 for Win8... is it possible? and how?

  Hi guys... I saw this question a lot on forums, but to be honest who am a bit confused as the final towards the right solution route... Currently, I have CS3 Master Collection on my laptop Win7... but you need to upgrade to a new laptop which will inevitably earn 8.1... How that is done to ensure compatibility and smooth? I hope someone can help... Thank you!

  Hello

  Please see the following link for the system requirements for CS3 Master Collection: system requirements | Master Collection

  Kind regards

  Shipti

• Get product Master ProductGrouping liquid

  When you use the grouping of products, you have an element of the main product.

  I want to be able to get this {{identifier}} articles now that seems possible, but I'm unable to recover.

  When in a great product presentation with bundled products, you can get the {{identifier}} the current fine product. After changing the product in the drop down you get the new {{id}} also fine.

  When you do {{this | json}} on the page when the page, you get the standard output. Once you select another product, you get the new output and for the performance of the master product great!
  But how to access this output of liquid. I've tried everything but know disp. {{This user.user [1]}}, {{this. {{[1] user.user}}, {{this.id [1]}}, {{productlist_3.id}} and on it goes. Here is the result of {{this | json}} after selecting a replacement product in the bundled products. Shortcut for readability.

  {'ModuleName': 'product', 'description': "This is an example of product.", 'catalogId': '138051', 'id': '9750229', 'name': 'product Name3","url":" / store/product-Name3 ",...}

  {"ModuleName": 'tag_productlist_3', 'description': "It is an example of product.", 'catalogId': '138051', 'id': '9750227', 'name': 'Product name1', 'url': ' / shop/product-Name1 ",...}

  To get the first one you just use {{identifier}} or {{this.id}}. How can I get the {{identifier}} for the low product or a product master in this case.

  In the raw page only displays

  AHA! It is not a matter of liquid, but JavaScript. Trying to review changes made by JavaScript in your code of liquid is not possible. You will need to examine the JavaScript code that handles the selection of substitute products.

  When debugging problems of liquids, we can avoid confusion only read the page source - cleanly separating JavaScript and liquid.

• The new system to purchase Adobe products confuses me. Help out me.

  The new system to purchase Adobe products confuses me.

  If someone would help me to understand what I have to pay for Adobe Creative Cloud Photo Shop, Illustrator, Dreamweaver, Adobe Muse?

  A Simple memory of the system operation $/ month. An advanced memory - even better.

  Best regards.

  Hi Isak,

  This can be a bit confusing. Let me see if I can clarify it for you:

  Adobe Creative Cloud is a current subscription that allows you to download and install the new Adobe Creative Suite software. You get also other creative software such as Adobe Photoshop Lightroom® and online services to help you synchronize, store and share files online. Best of all, you get the latest software and features as they are released. There are several subscriptions depending on what programs you want to use. Popular photography plan gives you Lightroom and Photoshop. You can also subscribe to individual products or the complete plan for all applications.

  Here is a list of Cloud Desktop Creative Applications:

  InDesign, Lightroom, Photoshop, Illustrator, Premiere Pro, After effects, Dreamweaver, Muse, Flash Pro, Acrobat Pro DC, Audition, bridge, leading edge, edge reflow, benefit Code, inspect edge, Fireworks, Flashbuilder, InCopy, Scout, prelude, SpeedGrade, Adobe Media Encoder, Story more, PhoneGap Build, prelude Live Logger, Gaming SDK, extensions, ExtendScript Toolkit Manager.

  Creative cloud includes all new tools CS6 (all the programs in the CS6 Master Collection), as well as 5 Lightroom, Adobe Museand Adobe Edge Preview. Services included are Typekit, Business Catalyst, Story moreDigital Publishing Suite simple editing, Behance ProSite, 20 GB of cloud storage, file synchronization, sharing and navigation systems and devices.

  Creative photography of cloud plan includes Lightroom and Photoshop CC for the Lightroom Office for mobile as well as Photoshop Mix for mobile devices.

  Students and teachers can get a discount for the first year. It is also expected for companies.

  You can see plans and prices here: https://creative.adobe.com/plans

  These links may also be of interest:

  Creating general cloud FAQ

  Plan of cloud creative photography

  Creative cloud to teams

  Creative Cloud for businesses

  Creating cloud licenses for education

  Creative cloud for students & teachers

  Creative cloud for the Government

  Mobile applications

  Guinot

• I have no bridge in CS6 Master Collection

  Hello everyone.

  I am currently at the end of my rope and very frustrated and confused.  I looked on the forums for a few days now and I just more confused.  Looked at 100s of pages in the forums of Bridge and Photoshop CS6 Collections.

  I bought CS6 Master Collection 6 weeks ago and after a few tries they have everything in the folder applications except for After Effects and bridge.  I can't live without AE but it seems bridge or a substitute is a must for opening RAW files in Photoshop as well as TIF, jpg, etc. in the raw files.

  I'm running OS X 10.9.5 bought a Mac Pro used (2008 model) computer with 2 x 2.8 GHz Quad-Core Intel Xeon processors, the 12 GB 667 MHz DDR2 FB - DIMM memory, ATI Radeon HD 2600 XT 256 MB graphics card.  I just upgraded to CS6 Master Collection (had suite CS4, which does not handle the RAW files from my camera) and that's what I have a problem with.   I understand that after effects 64-bit architecture needs to run and that is why it does not turn on or charge in the folder of the application from my computer and almost everybody does.  I don't know it's just that I haven't explored AE on the forums yet or if it's the problem with the bridge.  I saw nothing about whether the bridge to 32 or 64 bits for the CS6 version.

  My questions are:

  First of all, is bridge one component of CS6 Master Collection Suite (some say no) - should I have seen as a component of CS6 MC or not?  I have seen no stand alone fill in my collection that some components in After Effects, Premiere Pro, Illustrator and one or two others.  Photoshop did nothing referring to the bridge in its download.  It is forums that bridge some form plays well with Photoshop (CS6) so I don't know what the problem is.  If it is a separate issue, what's her name and where can I get it?

  The requirements for the CS6 States that Photoshop needs 64-bit like AE, but it seems to work OK in my 32-bit, and that's where my real confusion comes into play. Bridge must 64 - bit - anything.  I saw nothing in my 'to about this Mac' who says 64 or 32, but I'm probably not the right pane.

  If there is a reason I can't bridge to play nice on my machine?  Someone can think otherwise to open jpg files and did the first as bridge is supposed to do if I bail on the bridge for a reason any (last resort)?  I open CR2 files in raw one or twice so this isn't a problem, it seems to me - just of conversion.

  Thanks for everything and all the tips, suggestions, etc.    If I can begin to manipulate pictures in Photoshop.

  Thank you.

  Eric

  Bridge is not autonomous in CS6, CS6 bridge comes with 32-bit and 64-bit. Try to uninstall and reinstall Photoshop to see if that solves the problem.

• Problem strange RAW corruption on master + backup hard drive

  Hello

  I am a professional photographer and I have a problem of confusion with corrupted pictures. Although this technique is probably not Lightroom problem, I cannot think of a better place to ask and part of the issue is related to managing files in Lightroom. The problem coincided with the release of Lightroom 2015 CC-1, but I can't tell if it's somehow connected.

  In short, a month after the download and processing a large amount of RAW CR2 photos, many of them have corrupted. I only learned this yesterday when I tried to export.

  Corruption looks like this: http://www.justphotos.ca/errors/MEM404067.jpg

  The photo is not mine, but the problem is similar. Part of the photo seems normal, and the part is destroyed. Ratio varies.

  I performed following diagnosis:

  • CheckDisk from the Windows Explorer, including a review of surface - no problems found
  • inspecting SMART disk information (via Crystal disk Info) hard - the player gets in the 'good', without the obviously alarming parameter (although I'm no expert)
  • checked the RAM with memtest86 - no error
  • Rootkit and AVG scan antivirus - nothing found
  • Explore and Lightroom can normally handle files (copy, read, even develop), it's just that they are corrupt

  Most important question first: does anyone know what can cause this kind of corruption and avoid the detection of all tests mentioned above? What to do about it?

  Without doubt, if there was a problem with hard disk SATA cable or the motherboard

  — — — — — — — — — — — —

  Here's a bit more background where things get strange, and where someone with LR knowledge might be useful.

  The disk in question is a 4 WD to with tens of thousands of photos. I checked a large number of files at random, and so far found corruption in only two, chronologically one after another (which may mean that they are adjacent on the hard disk, but it can also not if she was significantly fragmented). There may be others, look at a RAWs after deleti

  Photos were taken a month ago. I copied them manually a master drive (internal) and a backup drive (external USB, that I connect it only for backups). I looked at all the photos in Lightroom and post processed a few hundred. They were all very good. After that they justsat there for a month with no activity and no display (IE. "I can't know exactly when they are corrupt).

  After post-processing, I used a software to synchronize folders of the master and backup drive. It copies the new files, existing files that are new or that have a different file size.

  Next question is crucial, so please help me shed some light on this subject. Lightroom IN ANY WAY change the CR2 files themselves? I know that it creates XMP sidecars. But it in any case never changes the master RAW file?

  This is important because I know for a fact that impeccable original RAW files copied manually on the backup disk. The synchronization software is not copy of corrupted files from the master disk unless they were changed somehow.

  As far as I know, classic disk corruption is invisible to the OS or file system - when it occurs, file size or date modified are changed - only the physical data of origin on hard disc tray.

  It may be of academic importance right now, but I need to know to change my backup solutions for the future.

  Thanks for your suggestions!

  matija1492 wrote:

  I use Windows Explorer for initial backup (when files are fresh off the memory cards) and later Karen's Replicator. Basically it compares just the folder main and backup with one set of rules. In my case, it replicates destruction and seeks new files and the changed files (by date and file size).

  I can highly recommend FreeFileSync because it offers much more more available capacity and reports to the Replicator from Karen. After having compare them initial source of backup disks it provides a detailed report of the files to be added, deleted or updated. You can easily see the files and folders that will be removed or updated during a synchronization operation backup and do a quick test of validation.

  matija1492 wrote:

  Can anyone recommend software that would drive stress-test and detect physical defects possible with plates, battery or electronic? I guess the problem should be with the plates, because the files were not changed at any time for other parts of the chain could damage the flow of data through the reading and rewriting. But if Windows CheckDisk could not detect even a problem with the surface analysis, how plates can be the culprits?

  All readers use control during the reading & writing data CRC to confirm the integrity of the data. Also with the degradation of the base of data errors would show in one or more of the INTELLIGENT information displays. Your car has no. It is quite possible that you encountered an error of intermittent system by reason of overloading, overheating or low supply voltage, etc. You can download the free SMART PassMark DiskCheckup utility and run the self-test extension.

  You can use the free HW Monitor to check the system of base temperatures, voltages and fan speeds. If you have run Memtest86 only and not MemTest86 + you can run. Unfortunately, these memory testers all run in stand-alone mode, without the operating system loaded. This may seem like a good idea so that you can access and test all locations of memory, but he may not reveal memory problems that occur only with memory loaded and running in the OS and applications.

  If you encounter other errors or system problems and two imported image files folders are affected it may have been a stroke of chance-event. The best suggestion that I can provide to help prevent it happening again is NOT move or rename files or folders after they are imported into LR. Using LR rating Keywording and Collection of tools and the filter bar, to organize and locate your image files, not folders. An inverter is also good protection against loss of same power infrequent or brown-outs.

• OSM on master pages

  I try to use a State 3, full-page, mso with a background semi-transparent to show static content behind him on all the pages of my folio. The problem I have is that I also need to have equipped msos full page, semi-transparent background that are unique to each page. Then the page mso maser is open the user can still open the DSO that is unique to the page but the master ASM remains too visible. I can't add a go to state hidden master OSM because it is not considered as existing in the page, so it does not show in the drop-down list of the object in the dialog button. When I touch the mso master on the master page, I have to rewrite the functions of the buttons for each page. Is this by far to all WHO play well together?

  I would like to try States Assistant object but it will not be installed. It says that I need version 9 and 10.9. My InDesign is version 10.2.0.69, so I find it confusing. It is said the same thing on both of my macs.

  
  

  Thank you in advance for an overview of this.

  Very useful, but you might not like the answer.

  You need to rethink this. I would seriously give to move Captain MSO live pages and combining it with the one already there. In this way, you do not have to worry about control separate MSOs.