Conncetion VPN works not-Tecra A8 / WXP
Hello
I have a Toshiba Tecra A8 (3 years) with Windows XP / SP3.
Everything works fine (network cable or wireless; Bluetooth too), with when I tried to configure a VPN connection to my company's server, it does not work.
The router in my house works well, as well the firewall in the work of the company.
I know that because the other Win XP or Win 7 PC and laptop can connect to the company.
I got the Error Message "721" (from component VPN) which could also be a network adapter error (unsupported protocol or if)- but there might be another reason too.
I tried to update the network adapter driver, but did not find a more recent software.
And currently, I am unwilling to upgrade to Windows 7 without knowing it, the error seems too.
Any ideas? Advice and links to possible answers, I would like to say thank you in advance.
Concerning
Peter
Don't know if this problem of card s really a LAN as described above; the network administrator must check everything first and determine if this problem of client for s (VPN) software.
Tags: Toshiba
Similar Questions
-
Hello
I'm trying to set up a private network virtual to another ASA. I ping the outside fo the other ASA. This VPN is just for a small site in a hub and spoke topology, my config is just for the Office spoke so he basically this office having to send all it's traffic to the hub HQ where the servers are. You see no reason why the VPN will not come to the top?
ciscoasa # sh run
: Saved
:
ASA Version 8.4 (2)
!
ciscoasa hostname
activate 8Ry2Yjyt7RRXU24 encrypted password
2KFQnbIdI.2KYOU encrypted passwd
names of
!
interface GigabitEthernet0
nameif outside
security-level 0
IP 90.174.83.202 255.255.255.252
!
interface GigabitEthernet1
nameif inside
security-level 100
IP 10.101.61.1 255.255.255.0
!
interface GigabitEthernet2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet5
Shutdown
No nameif
no level of security
no ip address
!
passive FTP mode
internal network object - 10.101.61.0
10.101.61.0 subnet 255.255.255.0
network of the internal object - 0.0.0.0
subnet 0.0.0.0 0.0.0.0
network of the Corp object
10.100.1.0 subnet 255.255.255.0
access extensive list ip 10.101.61.0 inside_access_in allow 255.255.255.0 any
inside_access_in list extended access permit icmp any one
access extensive list ip 10.101.61.0 outside_cryptomap allow 255.255.255.0 10.100.1.0 255.255.255.0
pager lines 24
Enable logging
registration of the errors of the console
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 714.bin
don't allow no asdm history
ARP timeout 14400
!
network of the internal object - 0.0.0.0
NAT dynamic interface (indoor, outdoor)
!
NAT (inside, all) after-service automatic internal static source - 10.101.61.0 internal 10.101.61.0 static destination Corp. Corp. non-proxy-arp
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 93.174.83.201 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
LOCAL AAA authorization command
LOCAL AAA authorization exec
Enable http server
http 10.101.61.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs group5
peer set card crypto outside_map 1 80.171.156.66
card crypto outside_map 1 set ikev1 transform-set ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1 define ipsec ikev2 proposals
outside_map interface card crypto outside
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.101.61.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd address 10.101.61.10 - 10.101.61.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal GroupPolicy_80.171.156.66 group strategy
attributes of Group Policy GroupPolicy_80.171.156.66
VPN-tunnel-Protocol ikev1, ikev2
username * oiYa7C.IOflZak password encrypted privilege 15
tunnel-group 80.171.156.66 type ipsec-l2l
tunnel-group 80.171.156.66 General-attributes
Group - default policy - GroupPolicy_80.171.156.66
IPSec-attributes tunnel-group 80.171.156.66
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect sunrpc
inspect the tftp
Review the ip options
inspect the rtsp
inspect the pptp
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect esmtp
inspect sqlnet
inspect the skinny
inspect xdmcp
inspect the sip
inspect the netbios
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
crashinfo record disable
Cryptochecksum:fbebeccb487674e3d8d1c4cff0b27749
: end
ciscoasa #.
Hello
An obvious problem is scheduling of the NAT rules
network of the internal object - 0.0.0.0
NAT dynamic interface (indoor, outdoor)
!
NAT (inside, all) after-service automatic internal static source - 10.101.61.0 internal 10.101.61.0 static destination Corp. Corp. non-proxy-arp
In the configuration above Dynamics PAT configuration replaces the configuration of NAT0 means for VPN L2L
You must make this change and test again if there other problems
no nat (inside, all) after-service automatic internal static source - 10.101.61.0 internal 10.101.61.0 static destination Corp. Corp. non-proxy-arp
NAT (inside, all) internal static source - 10.101.61.0 internal 10.101.61.0 static destination Corp. Corp. non-proxy-arp
We delete "automatic termination" of the command so that the NAT0 rule is moved to the top of NAT rules before the current dynamic PAT rule to the LAN.
Hope this helps
-Jouni
-
I have a windows VPN (PPTP) Server behimd my Nighthawk R7000 router but the router does not allow for VPN passthrough? Any ideas?
I have port 47 GRE TCP/UDP and TCP 1723/UDP sent to my IP address of the VPN server. Am I missing something? It be a checkbox to enable VPN passthrough but I don't see on the R7000 nighthawk? Its not me to VPN in my network. Help, please. Once again it is for Windows VPN not the customer to Open VPN (that I don't want to use)
Yes, I have forwarded manually and yes I have chosen pptp vpn in the drop down menu. I managed to solve the problem though! I just removed the pptp vpn service from the drop down and added service pptp again and now everything works fine.
-
Hello
I can't get my work vpn site-to-site. Not only that but I am unable to get an internet connection through my ASA. I need to use the IP address public for my local network provided by IPS = 99.143.97.186 - 190 = 255.255.255.248 subnet mask
I followed this tutorial: http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-nex...
can someone please take a look at my settings and help out me? Very much appreciated. Thank you.
See the ciscoasa config (config) #.
: Saved
: Written by enable_15 at 01:12:15.869 UTC Thu Sep 4 2008
!
ASA Version 8.2 (5)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 99.143.97.186 255.255.255.248
!
interface Vlan2
nameif outside
security-level 0
IP 192.168.1.84 255.255.255.0
!
interface Vlan3
No nameif
no level of security
no ip address
!
passive FTP mode
access-list extended 100 permit ip 99.143.97.184 255.255.255.248 host 206.127.20.63
99.143.97.184 IP Access-list extended sheep 255.255.255.248 allow host 206.127.20.63
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 206.127.20.63 255.255.255.255 192.168.1.254 1
Route outside 206.127.21.3 255.255.255.255 192.168.1.254 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 99.143.97.184 255.255.255.248 inside
http 99.143.97.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
correspondence address card crypto outside_map 20 100
peer set card crypto outside_map 20 206.127.21.3
card crypto outside_map 20 transform-set RIGHT
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 99.143.97.187 - 99.143.97.190 inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
tunnel-group 206.127.21.3 type ipsec-l2l
IPSec-attributes tunnel-group 206.127.21.3
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:0ab759de3926ddb63f79f18a8422409eciscoasa (config) # show crypto isakmp his
There is no isakmp sas
ciscoasa (config) # show ip performance
!
interface Vlan1
nameif inside
security-level 100
IP 99.143.97.186 255.255.255.248
!
interface Vlan2
nameif outside
security-level 0
IP 192.168.1.84 255.255.255.0
!You have an interface incorrect configuration: -.
Add these lines and share how it rates:
interface Vlan1
no address ip 99.143.97.186 255.255.255.248
IP 192.168.1.84 255.255.255.0interface Vlan2
no address ip 192.168.1.84 255.255.255.0
IP 99.143.97.186 255.255.255.248Kind regards
Dinesh MoudgilPS Please rate helpful messages.
-
Split DNS on ASA 5510 access remote vpn works not
I connect successfully to the tunnel and can ping hosts remotely by IP but am unable to browse the internet from the VPN client. Also, the resolution of host name on the remote end does not work... can only connect through the IP address. Ideas? Thanks again!
Your group policy will SUFFER a good split tunneling and divide the dns settings. But I think that you are awarded the DfltGrpPolicy rather than your group policy will SUFFER because group policy is not set in your group of tunnel, nor be transmitted from authentication.
Make a vpn-sessiondb distance 'show' to confirm what group policy is assigned to fix it, assign your group policy will BE to your group of tunnel as follows:
global-tunnel-group attributes
Will BE by default-group-policy
-heather
-
ASA 5520 8.0 (4) port depending on the ACLs vpn works not
Hi all
I have a problem with an ASA (5520 8.0 (4)) for lack of working with a port based acl for remote clients. I have a simple acl from a single line to split traffic, if I allowed the tunnel IP works fine, if I lock it up to TCP 3389 rdp will not work. I don't see anything in the logs and debug output, I did have a problem with a similar configuration (5510 8.0 (4) and I'm at a loss to explain it.)
Everyone knows about this problem before? I have nat exclusions etc and as I said, the tunnel only works if the acl permits all IP traffic between client and server.
THX in advance
Split-tunnel list cannot IP, if you want to restrict which ports are are sent via the tunnel vpn for your clients vpn, you need to use VPN filters under Group Policy:
-
prospects for bt infinity
I recently changed my home to infinity of BT broadband. Now I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. I get the following error at startup of outlook.
Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable. Outlook must be online or connected to complete this action. »
Anyone have any ideas?
Allan M
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
Ramata Thakur
-
After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?
This was the solution! The works of vpn as $ 1 million now. I followed the instructions above to enter the uninstall program and selecting the repair option. I rebooted the machine, then used the troubleshooting on vpn software compatibility option. Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.
Thanks, Nick!
Rick
-
After ASA 7.1 (2) upgrade 8.0 (4) remote VPN is not working properly.
I just upgraded my ASA from 7 to 8 and now, my remote access VPN working properly. The tunnels connect and I can ping anything, but I can't browse network shares or connect to Exchange.
No idea as to what I'm missing?
Thank you
Dan
IPSec VPN packets are removed when compression is enabled, when you configure the enable command ip-comp under Group Policy, then large packages that are eligible for compression are deleted in silence by the security apparatus. VPN compression is only useful for very slow Internet connections, so we suggest you disable compression (ip-comp disable). Alternatively, you can move on to build interim 8.0 (4.16) or later. (CSCsu26649)
Release notes for Cisco 8.0.4.
-
IPSec sequence numbers not working not for the multi VPN
a site at a single site VPN works no problem, but when I add the second peer in the concentrator, router it does not connect. There is no routing in place that all routers are connected to the same switch, and with no crypto card they can all two ping 192.168.2.1. With crypto card only 192.168.2.2 can ping 192.168.2.1. I'm at a loss as to what I'm doing wrong, it seems simple I just add the Test input with a different number, but it won't work.
Ask any other question you can think of. I followed the same controls on both spoke routers so that it seems that it would be in the hub, router, but he beat me as to why.
Thanks for the help.
Concentrator, router:
----------------------------------------------------------------------------------------------------------------------------------------------
R1 #sh card crypto
1 test card crypto ipsec-isakmp
Peer = 192.168.2.2
Expand the IP 110 access list
access ip-list 110 permit a whole
Current counterpart: 192.168.2.2
Life safety association: 4608000 kilobytes / 86400 seconds
PFS (Y/N): N
Transform sets = {}
Test,
}
Interfaces using crypto sheet test:
FastEthernet0/0
2 ipsec-isakmp crypto map test
Peer = 192.168.2.3
Expand the IP 110 access list
access ip-list 110 permit a whole
Current counterpart: 192.168.2.3
Life safety association: 4608000 kilobytes / 86400 seconds
PFS (Y/N): N
Transform sets = {}
Test,
}
Interfaces using crypto sheet test:
FastEthernet0/0
---------------------------------------------------------------------------------------------------------------------------------------------
R2 #sh card crypto
1 test card crypto ipsec-isakmp
Peer = 192.168.2.1
Expand the IP 110 access list
access ip-list 110 permit a whole
Current counterpart: 192.168.2.1
Life safety association: 4608000 kilobytes / 86400 seconds
PFS (Y/N): N
Transform sets = {}
Test,
}
Interfaces using crypto sheet test:
FastEthernet0/0
----------------------------------------------------------------------------------------------------------------------------------------------
R3 #sh card crypto
1 test card crypto ipsec-isakmp
Peer = 192.168.2.1
Expand the IP 110 access list
access ip-list 110 permit a whole
Current counterpart: 192.168.2.1
Life safety association: 4608000 kilobytes / 86400 seconds
PFS (Y/N): N
Transform sets = {}
Test,
}
Interfaces using crypto sheet test:
FastEthernet0/0
There is a typing error in the IP for the PSK on R3.
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Some keys on the keyboard does work not after the suspect virus on Tecra
Apostrophe, delete, semicolon and the end of the keys no longer work after a suspected virus attack. I found the same problem on the net record but apparently this guy fixes his problem after stop scroll or NumLock on found him.
This isn't the case here, but it's something with numlock - registry Watch 2 and not 0. switch to 0 but when reboot 2 times.
Suspect has changed through the bios. I thought that I couldn't get to the bios because DEL key does not but found ESC works.
Tried to reset the values default to the bios but then can't save and exit it in accordance with the EndKey to work.I was running XP at the time of the (alleged) attack and could not correct the problem so to put the computer OEM as I hoped would help - there no, same problem, so instead of installing all the software on the computer with XP I upgraded to Windows7 - charge install.
Keys still don't work - it was a real pain first as my computer was created for ctl + alt + delete to log on and I had to do with the keyboard of the screen - XP - it showed also that numlock performed before and after windows starts.
The reason why I suspect a virus - my wife was watching an of its tv shows on the line of the country of origin (an another toshiba laptop) and I needed to use this laptop for something else, so I asked to use mine - then we turned off laptops and the morning turned tham back on again once , the other laptop with virus protection AVG reported several hits and this one with Norton (FAMOUS and completely up-to-date) flagged nothing - once I got the screen keyboard.
Problems with this computer were found after scanning with different antivirus.
Anyway - I find myself with 4 keys that don't work not on my keyboard (in fact they work after I have connected to the computer for the first time, but I had to hold them in place for a long time - and then the next time I rebooted, not at all and did not since)Here, any help would be greatly appreciated, I'm working on this all weekend with no joy at all.
Thanks in advance.
Having a virus attack, the Windows files will be destroyed. Try the scan with kaspersky on Nod 32. If not help, reinstall os because it is the best solution in your case.
-
I understand that the VPN does not yet, with the Sierra
Is this a Bug? or, if this possibility has been deleted?
Can we expect support once again with one of the 10.12. # updates?
This is a very important feature to my office with it, we will not update for Sierra.
Thank you
VPNS work very well in Sierra as long as they don't use PPTP. Support for PPTP has been removed because it is not safe. By using a PPTP based VPN is useless. Your data is not safe.
-
Fall of VPN - value not roll over to original internet connection
I connect to a VPN that I put in place via the folder "manage my connections" of Vista. The VPN works great. However, I want to set up so that when the VPN fails, my internet activity is not automatically roll to my regular internet connection. What I can't figure out how to do.
Thanks in advance!
Hello
Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows server forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/winserverNIS/threads
-
VPN works, causes periodic freezes of BEFSX41
I use a BEFSX41 as a firewall/router and site to site vpn.
While the vpn tunnel is up the router seems to freeze every minute (sometimes after 45 seconds or 30 seconds.
This is easily evindent when ping the router from another machine on the side of the intranet. While the average ping time is less than 1 milliseconds, every minute it will be 500 milliseconds or more. A ping to a machine on the remote side of the vpn is usually 80 milliseconds and every minute or so it goes up to 2 seoconds for a few pings.
If I take the vpn to the bottom of the judgment of the problem (i.e. ping the router/firewall to the intranet side is consistently below 1 millisecond)
I discovered that these freezes/delays coincides with information in the vpn log file, it looks like this:
2008-12-04 12:46:01 IKE[1] Set up ESP tunnel with 206.xxx.xxx.xx Success !2008-12-04 12:46:012008-12-04 12:46:34 IKE[1] Rx << QM_I1 : 206.xxx.xxx.xx HASH, SA, NONCE, ID, ID2008-12-04 12:46:34 IKE[1] **Check your Local/Remote Secure Group settings !2008-12-04 12:47:012008-12-04 12:47:01 IKE[1] Tx >> MM_I1 : 206.xxx.xxx.xx Error !2008-12-04 12:47:02 IKE[1] Rx << MM_R1 : 206.xxx.xxx.xx SA, VID2008-12-04 12:47:02 IKE[1] ISAKMP SA CKI=[342ed619 c59fed01] CKR=[kkkk1954 ffff4e87]2008-12-04 12:47:02 IKE[1] ISAKMP SA 3DES / MD5 / PreShared / MODP_1024 / 3600 sec (*3600 sec)2008-12-04 12:47:02 IKE[1] Tx >> MM_I2 : 206.xxx.xxx.xx KE, NONCE2008-12-04 12:47:03 IKE[1] Rx << MM_R2 : 206.xxx.xxx.xx KE, NONCE2008-12-04 12:47:03 IKE[1] Tx >> MM_I3 : 206.xxx.xxx.xx ID, HASH2008-12-04 12:47:05 IKE[1] Rx << MM_R3 : 206.xxx.xxx.xx ID, HASH2008-12-04 12:47:05 IKE[1] Rx << QM_R1 : 206.xxx.xxx.xx HASH, SA, NONCE, ID, ID2008-12-04 12:47:05 IKE[1] Tx >> QM_I2 : 206.xxx.xxx.xx HASH2008-12-04 12:47:05 IKE[1] ESP_SA 3DES / MD5 / 3600 sec / SPI=[nnnn7daf:mmmm9ee9]2008-12-04 12:47:05 IKE[1] Set up ESP tunnel with 206.xxx.xxx.xx Success !2008-12-04 12:47:052008-12-04 12:47:32 IKE[1] Rx << QM_I1 : 206.xxx.xxx.xx HASH, SA, NONCE, ID, ID2008-12-04 12:47:32 IKE[1] **Check your Local/Remote Secure Group settings !2008-12-04 12:48:012008-12-04 12:48:01 IKE[1] Tx >> MM_I1 : 206.xxx.xxx.xx Error !2008-12-04 12:48:02 IKE[1] Rx << MM_R1 : 206.xxx.xxx.xx SA, VID2008-12-04 12:48:02 IKE[1] ISAKMP SA CKI=[60e98e30 f5831f66] CKR=[kkkk6675 ffff38d1]2008-12-04 12:48:02 IKE[1] ISAKMP SA 3DES / MD5 / PreShared / MODP_1024 / 3600 sec (*3600 sec)2008-12-04 12:48:02 IKE[1] Tx >> MM_I2 : 206.xxx.xxx.xx KE, NONCE2008-12-04 12:48:03 IKE[1] Rx << MM_R2 : 206.xxx.xxx.xx KE, NONCE2008-12-04 12:48:03 IKE[1] Tx >> MM_I3 : 206.xxx.xxx.xx ID, HASH2008-12-04 12:48:05 IKE[1] Rx << MM_R3 : 206.xxx.xxx.xx ID, HASH2008-12-04 12:48:05 IKE[1] Rx << QM_R1 : 206.xxx.xxx.xx HASH, SA, NONCE, ID, ID2008-12-04 12:48:05 IKE[1] Tx >> QM_I2 : 206.xxx.xxx.xx HASH2008-12-04 12:48:05 IKE[1] ESP_SA 3DES / MD5 / 3600 sec / SPI=[nnnn65e5:mmmm2ea9]2008-12-04 12:48:05 IKE[1] Set up ESP tunnel with 206.xxx.xxx.xx Success !2008-12-04 12:48:05
The situation described above repeats adfinium
To be clear, the vpn works (with the exception of periodic delays) throughout several days
I think that my settings may not completely right, butI don't know how to interpret the log above
Found.
I had disabled PFS. I enabled PFS and the problem disappeared.
http://en.Wikipedia.org/wiki/Perfect_forward_secrecy
See sections 8-10 http://www.ietf.org/rfc/rfc2409.txt to see why
-
Remote Access Auto Connection Manager and error with a VPN work
I use my laptop to connect to my VPN working. It has not worked since June 24, 2010. I get a message indicating that the connection to network access device is not found. I also have a problem with the connection manager automatic remote access. I'm trying to launch and get an error code 5, unauthorized. The Auto Connection Manager remote access has something to do with the vpn access problem and if so how can I solve this problem?
Hello hitherandthee,
Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Following your question thanks for posting the link below:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads?page=10
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Must mobile Firefox be synchronized with a computer?
I don't have. Portable right now so would like to know if the synchronization for a desktop or computer is necessary?
-
My computer does not illuminate? It's like he went into permanent hibernation and screen says no signal input for the two DVI & VGA? It happened after my 2 year old was playing with the keyboard. Power on both drives hard & monitor buttons are oran
-
I have no idea what it is and how it was generated. Any guidance will be greatly appreciated thanks
-
Improvements of Windows Media Player no display/visible
Hello None of the improvements made to the Media Player 12 on Win7 work. When I go to the menu View/improvements and select an enhancement, they appear. And, so, he's not hiding behind a window. Tried to re - install but not joy. Any thoughts? Thank
-
I have a problem with the Clone Stamp tool?
The Clone Stamp tool doesn't work really well it does not tell the source select and the pad want not applied the correction?