Connect AirPort Express to lemon (Rogers Rocket) Wireless Modem/Router

I just got Rogers Wireless internet new modem/router Hitron.  I use modem/router mode.  It's great. Very fast and a lot of range. Covers all 3 floors of my house.

I want to connect an Apple Terminal to my Hitron router with an ethernet cable and put the Hitron in Bridge mode. I want to continue to use the Hitron router as my main and only router.

However on another floor, I would use an Apple Airport Express connected to my stereo with a jack 1/8 '' to play my music wirelessly from my iTunes from Apple.

To do this, I need this Apple Airport Express Terminal to 'find' the Hitron router.  How can I get to find the router Hitron?

I guess that you have a current version or recent of the AirPort Express with the default settings.

As long as the AirPort Express is located where it can receive a strong signal of the modem/router...and wireless Hitron the Hitron aircraft provides a wireless signal that uses industry standard wireless settings, the AirPort Express can 'join' the wireless network. Wired Ethernet is not necessary.

Note that the AirPort Express will not "spread" or "repeat" the signal from the router/modem lemon to provide additional coverage of wireless signal wireless, but it can be used to join the wireless network and provide a signal of airtime for your stereo.

Simply use a Mac running a current or recent operating system, or an iPhone/iPad and configuration "Wizard" Apple to set up things upward. The wizard will automatically offer the correct configuration to 'join' the wireless network. All you really need to do is to enter a device name that you want to use for the AirPort Express and the password of the wireless network and confirm.

Start the wizard by clicking on AirPort Express under the title of the new AirPort base station.

On an iPhone or iPad, the screen looks like this:

In the example below, the wizard has detected a network named "2WIRE902" for the AirPort Express join. You will see the name of the wireless network that provides the Hitron modem/router on your screen. Just enter a name of device for the Express, then type the wireless network password, then type it again to verify.

Click next at the bottom right of the window and the AirPort Express displays a green light for a minute or two and you're done.

Tags: Wireless

Similar Questions

  • Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

    Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

    Superior...

    After all, the chip is mainly a modem.

    Wireless is there but not designed as the primary connection.

    Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

    It is the Wireless N standard.

    The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

    The fact that aid.

    The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

  • How to put in place the new Airport Express to extend the current wireless WiFi U-Verse home network?

    Hello

    What are the steps for the creation of a new AIRPORT EXPRESS MC414LL/A Terminal so that it make that expand my network existing wireless, using my current AT & T UVerse equipment home.  Here are the details...

    Internet service provider: AT & T U-Verse

    Existing facilities: primary AT & T provided router/Modem: ARRIS NVG589 (reference 587234-004-00) that manages my house wired and wireless Wi - Fi.

    PROBLEM: Does not offer full Wi - Fi coverage

    SOLUTION: Attempt to add a new Terminal Airport Express so that it will extend coverage of the existing Wi - Fi network wireless.  I plan on the use of certain features such as streaming my content from iTunes to my sound, surround sound, etc Airport Express Library.

    NEW FEATURE: APPLE AIRPORT EXPRESS 802.11n Wi - Fi PART # MC414LL/A

    I wish I had AT & T equipment to continue to manage the Wi - Fi and network functionality (DNS, firewall, etc.), as it currently does.  However, I want to use the Airport Express to extend Wi - Fi coverage.  I already have a cable ethernet from the floor and the AT & T ARRIS NVG589.  I just need to know how to set up my new Apple Airport Express.

    Thank you!

    With the Express connected to Arris gateway with Ethernet, you have the basis for a roaming network.

    I would recommend that you run the AirPort Utility and allow it to run automatic installation of the Express. The utility should detect that the Express is connected by Ethernet and go through the steps to properly set up. Note: If you have made any changes to the Express since out of the box, I strongly suggest that you first perform a 'factory' reset on it to make sure that the installation went well.

  • Is it possible to use the AirPort Express to AirPlay only? (Wireless)

    Hello

    I have a speaker and I would empower AirPlay for it. I have an old airport express here in my house and I wanted to plug my express from the airport to my wireless network and allow the airplay.

    The only thing I don't want to not remove is the possibility to extend the wireless network, because I'm pretty sure it will do more bad then good, since I was a big of AC very close to the speaker wireless router. (http://www.asus.com/us/Networking/RT-AC5300)

    Is it possible to use the Airport express only airplay? Without trying to extend my network?

    Thanks in advance!

    Kind regards

    Tiago

    Yes, if you have the main router near the speakers... then simply plug the Express into the enclosure of the ethernet... Run it in Bridge mode and turn off wireless... Then check if you can find it in iTunes etc to send the stream of airtime.

    Or you can configure it to join a wireless network... it will not extend... Apple call it client mode.

    AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

  • Airport express at slow speed of the modem Arris SB6190

    Hello!

    My so-called WIFi Comcast gives me 150Mbps. My test only show 70 or slower speed on a WiFi test. After the call to them they told me to talk to my modems customer service. But their customer service is terrible. Here is my setup and yes everything has been switched off voltage and reset. And Comcast has been created with the modem while the Comcast guy was here. From the start after a few hard reset the express worked. Here's the question and the installation program.

    I have a SB6190 (not wireless), Arris directly connected to my Airport express. The express (which deals with my wireless connection) is connected to a switch (for wired devices). But I think that my problem is the Express. ? Not sure, I guess my question is I do something wrong in public services from the airport with the Express settings? I do not see why I get more 75Mbps wireless. Or maybe Apple if your reading, you can give it a fix on your next update. Hope you can help and thanks!

    Here some thoughts:

    (1) the Airport Express uses 100 ports Ethernet of Mbit/s, so the theoretical maximum speed that could be achieved with an Ethernet or Wi - Fi through the Express would be 100 Mbit / s.

    (2) the Express is not known for his speed wireless. On a connection of 100 Mbps Internet here, I see usually 45 - 50 Mbps at best more wireless, no matter if the 2.4 GHz or 5 GHz is used.  Ethernet checks better about 75-80 MB/s to the Express LAN port.

    (3) these are user to user support forums, so it is very unlikely that anyone from Apple will ever see your post. If you want to provide feedback to Apple, you can do so here: Apple Apple - AirPort Express - Feedback will acknowledge receipt of your message, but they will not respond after that.

    (4) the AirPort Express was introduced almost 4 years ago and it's been 2 years that Apple has provided an update firmware for the product, so additional updates are not probably... my opinion.

  • How can I configure my Airport Express to mesh with new cable modem bridge mode?

    Time Warner sent me a new cable modem and my Airport express still flashing orange light. How can I configure the Airport express in bridge mode?

    You can simply do using AirPort Utility on your iMac or iPhone, as follows:

    • Run the AirPort Utility.
    • Select the AirPort Express Terminal and then, select change.
    • For a Mac:
      • On the network tab, change the router Mode to: Off (bridge Mode)
      • Select to update and allow the base station restart.
    • For an iOS device:
      • Select Advanced > DHCP and NAT
      • Change the router Mode to: Off (bridge Mode)
      • Select done and allow the base station restart.

  • I can't connect my desktop PC to my wireless modem router

    Hi I am trying to go on the internet on my desktop computer via my wireless, I tried to add a new device but shows nothing to add. My wireless modem is in my kitchen for my office, but I'm willing to put my PC in my room and let gateway in kitchen HELP PLEASE

    Hi Smartin2012,

    Thanks for the reply.

    That you want to connect to the desktop to a wireless router. The computer must have wireless capability. To do this, you may need to buy a wireless network adapter to connect to a wireless router.

    To learn more about wireless devices, visit these links.

    http://Windows.Microsoft.com/en-us/Windows7/selecting-a-wireless-router-or-another-wireless-network-device

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-find-a-wireless-network

    http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

    If you use a mobile broadband visit this link:

    http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

    Using the windows-related issues feel free to post on Microsoft Community.

  • Cannot connect remotely via VPN since installing the new modem/router

    Can anyone help please. Since the acquisition of a new router / modem I can no longer connect via VPN to my work PC remotely. It comes in I receive the error message. Can someone tell me if I need to change the settings for the new modem / router to access?

    Hello Joanna,

    Here are the steps you need to do first:

    1. Off static IP for my server and let the router assign IP address and changed the IP address of the port forward.
    2. Check the IP address because obviously, that changed when you plugged into the router again.
    3. Updated to the latest firmware for the router and NIC.

    For more detailed troubleshooting you can refer to this link: troubleshooting common VPN related errors.

    Let us know how it goes.

  • Annex WAG160N has v2 ADSL2 + Wireless Modem Router disconnecting at random intervals

    The problem is that my WAG160N router v2 isolates at irregular intervals for no clear, obvious and clear reason. The router always reconnects to the Internet automatically, but we want to have stable internet connection so it does not interfere with our download and my game online. Sometimes, it will be disonnect once a day, two days, three days or more times a day.

    This problem occurred for about nine months and we have tried to solve this problem for four months without success and very little progress.

    There are nine devices connected to this router:

    Desktop Mac (connected by an Ethernet cable)

    MacBook Pro my mother (wireless)

    My mother of Windows (wireless) laptop

    My Iphone (wireless)

    My mom (wireless) iPhone

    Our Ipad (wireless)

    Our printer (wireless)

    My Xbox 360 (connected by an ethernet cable)

    My PS3 (connected by an ethernet cable)

    First of all, I contacted our ISP. They conducted tests on our phone line and there was no obvious abnormalities. They then made some adjustmenets to our connection, but none of the improvements to our stability of connection, either. I also did the isolation test which did not help. Then they came to the conclusion that this router is the source of the problem.

    Then I noticed that when my Internet was disconnected we had active DHCP and it kept more than one of our devices, assigning the same IP address. On my desk he showed me an IP address conflict message whenever we have disconnected from the Internet. So I disabled the DHCP and manually assigned each device to their own individual IP addresses static. This has not fixed my problem even if there are more conflicts of IP addresses.

    Then I tried to connect my computer directly to the WAG160N v2 via an ethernet cable, but each single device is always give themselves up randomly. Therefore, we have established that this problem occurs with the cable connections and wireless.

    After that, I did some research on the Internet and made a lot of adjustments and modifications that do not stop this problem.

    These including: lower the MTU to 1365, changing to channel wireless channels 1 and 6 (we were on channel 11), using a standard instead of a wide channel, lowering the keep alive - redial period from 30 seconds to 20 seconds, increasing the Redial period keep living to a maximum of 180 seconds, disable UPnP and disable the DHCP server on the router configuration page.

    I have same Access Restriction is turned off.

    I also checked with my ISP and we use the correct settings of Encapsualtion, multiplexing and Virtual Circuit.

    So I thought I would post here because we really need to have this fixed a problem and we do not know how. I can't find the logic of why this is happening. This problem shouldn't be complicated.

    Any help would be appreciated, thanks.

    My Internet has not disconnected for a week.

    Without reset and reconfigure my router, I did the following in the advanced wireless settings page:

    Reduced from 100 to 75 beacon interval

    Lowering of the threshold of Fragmentation of 2346 to 2306

    Lowering of the 2346 to 2304 RTS threshold

    I found this info from a different thread.

    I'll post again less than a week and if my Internet connection is always stable, I will mark this message as my solution.

  • Airport Express connects to my WiFi bridge

    Hello world

    It is searched many Web pages and throughout the Apple support forums, but I still could not understand...

    I bought recently Airport Express to extend my Wifi in another room and thus use it for AirPlay. My existing WiFi network is set up by the router, Asus RT - N12 (it is connected to our modem from the vendor to the scale of home - isn't available). I want to my Airport Express to work as bridge, connected to the existing network and to serve as extension and receiver airplay.

    It works only when I connect Airport Express via LAN cable to the Asus router and set it as the new network. This is not convenient because it is located near the router and does not provide any additional coverage to our Wifi.

    I tried to set up the base Airport Express "Extend existing network." But once set, it REQUIRES connection via cable. To connect to the existing WiFi network, there is NO other choice. This option is missing in the Airpot utility, so I can't select the Wifi to connect to.

    In addition, when I connect to the Airport Express Terminal cable to the WAN port (which is our wall of our home modem), you do not find the internet connection for some reason any (while Asus has no question to do).

    I'm quite desperate here. I already think to buy Airport Extreme. But I don't know if he will be able to connect to the internet for the same reason. And, it is five times more expensive. Everything else works with Asus without problems and additional parameters. iPhones, iPads, Apple TV, Android phones, Mac Pro, laptops Windows (except old 3G iPhone that says that it cannot connect to the network).

    Any ideas where to look for a solution? None of the settings in our modem Asus to allow the airport as bridge recommended? And, above all, WHY is configuring lack the ability to connect to the existing Wifi network and wants to connect via cable ONLY?

    Thank you...

    I want to my Airport Express to work as bridge, connected to the existing network and to serve as extension and receiver airplay.

    Unfortunately, function of "extend a wireless network" Apple is an exclusive feature that has been designed by Apple for only wireless "extend" the signal of another Apple wireless router.

    Or, another way of saying the same thing would be to say that, if you want to extend the wireless network, you will need two routers Apple for this purpose.

    In other words, the function 'extend' is not compatible with 3rd party routers, so the only way that you will be able to get the Express at work... or any other router from Apple, incidentally... would do what you did and plug the Express using a wired Ethernet cable connection.  If you cannot run the Ethernet cable, then you can take a look at a pair of Ethernet over Powerline (EOP) adapters to eventually send the signal on power lines the existing AC in your House.

    If you only want to use the AirPort Express for AirPlay, it might be possible for the Express to 'join' the wireless network... but the Express won't provide any additional wireless signal coverage by joining a wireless network.

  • Airport Express in client mode to serve Airport Extreme

    Hi guys,.

    I am struggling with Setup in our business that is pretty special. Our cash register, the Bank Terminal and the control system are all serviced by an Airport Extreme that was configured with care by a dedicated company. The extreme is powered via an Ethernet based modem. The basic modem is a box any of the internet service provider in our country that has four ethernet ports and a basic WIFI network that we open for customers. As the basic modem is too far from the extreme, a powerline sitecom was initially used to carry the signal to the modem from basic to the extreme.

    But the powerline connection was poor, so they advised me to replace the powerline by an Airport Express in client mode, which converts the client base modem wifi signal ethernet to the WAN port on the extreme. I installed the Express exactly as described by Apple (AirPort Express: how to join an existing client mode - Apple Support Wi - Fi network) and the entire installation ran smooth for about an hour. At a time of seemingly random, all of a sudden the extreme complains that the internet connection is lost. In airport utility, the extreme flashes green, but the internet icon is orange and the notification indicates that the connection is lost. However, the Express flashes green and is always connected to the WIFI which worked again properly, I confirmed. Restart the extreme and Express to solve the problem, but only temporarily. After some time, the extreme complained again that the internet is lost.

    Can someone explain what could cause this problem and how to solve? Thanks in advance.

    From your description, I guess that the WiFi connection between the base modem and the AirPort Express is where you need to solve problems more far. Looks like that the modem is not a simple modem, but a combination modem and the wireless router, also known as the name of a gateway device.

    Nevertheless, the best solution would be to use an Ethernet cable dedicated between the "modem" and the AirPort Extreme. Bypassing the Express all together. The next would be Powerline adapters. I'm a little surprised that those you used works well for you. Unfortunately, the scenario of 'worse' bandwidth performance is what you're doing now is to use the AirPort Express as an Ethernet bridge Wireless Terminal

    However, if you have no other choice in the matter, where you then place the Express can make a difference. You want to Express to be in a db 25 + range of report Signal to noise (SNR) of the modem. This will allow the Express maintain a connection compatible with this modem wireless network. To find out how to measure SNR, discover the next Tip of an airport users for details. Please post back your results.

  • Question Airport Express.

    I'm so confused. I'll try to keep a long story short. I lost my internet connection a few weeks ago, and instead blame Mediacom, I blamed my old airport of 12 years and I bought a new Airport Express Terminal (with a new ethernet cable to replace a at least 20 years. While the implementation of the new Terminal Airport Express, I was unable to get anything to work and finally called Mediacom. The problem was indeed at their end, where the cables to connect in the basement of my four-plex apartment.

    Now to cut to the Chase: given that I reproach myself my own equipment and not of Mediacom, I managed to set up two connections Airport Express (call Network1 and Network2). When I restart my computer, it connects inevitably to one or the other, but never the same. It connects only to those who, at the time, won't let me connect. So I turn to the other and all are well again. At the same time, when I get home, my iPhone will almost always automatically connect to the network which does not connect to the internet. It might work with Network1 while my computer only works with Network2. Same thing with my iPad. It is either 1 or Network2, but never both, and never the same. The three units can be on different networks at the same time for each group in order to connect to the internet.

    So my question (s):

    How can I remove one of the networks so that it completely disappears? There is apparently some kind of criss-cross current that confuses my computer and its peripherals.

    If I delete that which does not (at the time), I ALWAYS keep one connect correctly or I need to reset my Airport Express and start from scratch?

    I even does not start in the subject what a pain it was to connect my Tivo to my wireless network, because it works too only with one or the other. And I still have my printer wireless to set up.

    Help/suggestions/explanations are greatly appreciated. I've been using Mac and set up networks since the dark ages, but it left me speechless.

    The Airport Express should not have 2 networks unless you have enabled the guest network. Is it possible that your Internet router has a Wi - Fi network on it as well?

    I highly recommend you reset the default Airport Express Terminal and try again. It's really the only way you are going to get a suitable resolution.

    It is also possible that your network of old and new settings are still in iCloud keychain and causing some confusion.

    I would recommend you disable iCloud Keychain on each device, then make sure that you forgot the network name on each device.

    Recreate your wireless network (giving a new unused name so you can tell if it's all working), then log in to the network without wire on each device, one at a time, making sure the internet connection works.

    You can then re-enable iCloud Keychain if you wish.

    Good luck.

  • AirPlay and AirPort Express

    Bottom line on the front: My AirPort Express (N) (former model with a single ethernet port) is not listed as an AirPlay device to my iMac (2011) and MacBook Pro (2011).

    QUESTION:

    The EPA is connected to a stereo system in the same room, but away from my iMac.  I'm trying to use the EPAS to play my iTunes from my iMac to the stereo library.  When I click on the AirPlay icon in the menu, I see the ATV listed, but not the MONKEY.  If I use AirPlay on my drives to iOS, I noticed that everything (EPA and ATV).

    BACKGROUND:

    The iMac (as well as all my other Macs) are running El Capitan.  I have FiOS and my iMac is wired (ethernet) to my router from verizon, as is the Time Capsule, which transmits the WiFi to all my devices (all of my devices are newer running iOS 9.3.1) and my MacBook Pro.  I have also two AppleTV connected to the network.  My iMac and MacBook Pro (and iOS devices) see the AppleTV and can AirPlay for them, but only the iOS devices see the AirPort Express Terminal.

    RESOLUTION OF THE PROBLEMS SO FAR:

    My utility AP sees the MONKEY (and the TC) and I can handle it without problems (name change, settings, etc.).  My iPhone has no problem to see and using the EPA.  I troubleshoot-made the MONKEY by connecting to my network via ethernet (failed difficulty). reset of the MONKEY (failure of difficulty), turned on my iMac (no resolution) wifi, restarted the network and wifi (impossible difficulty), restarted my iMac and Mbps (failure of difficulty).

    What can I do else?  Thanks in advance.

    I understand in your current network setup you have the cable to the Capsule Time (TC) to the router provided by Verizon. I assume you have the AirPort Express configured to use a wireless connection to the wireless network provided by the TC.

    • What is the brand and model of the router provided by Verizon?
    • Is - this wireless router and it provides a network of Wi - Fi with the TC?
    • The TC and the Verizon router, both configured for a network of itinerant type?
    • The Express is configured to join or extend a wireless network?
    • Are the TC & Express configured as bridges?
  • AirPort Express 'expand' works not

    I just got a new AirPort Express Terminal 2nd gen and I'm trying to expand the network. We do not have an Extreme or Time Capsule. AirPort utility happens me an error stating that "this AirPort base station could not extend the wireless network. Make sure the wireless network you are trying to expand has been implemented and works correctly, you have entered a password for wireless network corresponding to this device, and that this device is in range of the wireless network". The network works fine. The password is correct for you. My phone is connected to the network, and the airport is connected by ethernet. Why is this happening? How should I do?

    Sorry, but "Extend a wireless network" feature Apple's patented and designed to work only with another router from Apple if you try to use the AirPort Express Terminal to expand the wireless network.

    With a router not Apple, the Express can expand the network, but it will wired Ethernet wired, permanent access to the main router.

  • How can I set Up Airport Express with an existing router/modem from the ISP

    I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer. I suggest you to connect the printer to the Airport Express A1392 Epson) via a USB port to enable the AirPrint features.  However, I guess the Airport Express must be an ethernet to the modem/router ISP connection and then use the Epxress airport more convenient than my wireless router.

    Issues related to the:

    1. do I need to turn off the function the ISP router's wireless when I plugged as stated above? So I wait.

    2. as the Airport Express only has one ethernet port I assume that I can connect my other ethernet connections using a hub 4 ports connected to the Airport Express Terminal.  It will be always possible to use other ports ethernet on the modem/router ISP as well?

    Doug

    I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer.

    You may have received incorrect information, because a non-AirPrint on the USB port on an AirPort Express Terminal... or any other router from Apple also printer... do not make the AirPrint-compatible printer.

    You want to continue nevertheless to check that this is true?

    The AirPort Express can connect to the network wireless router using a wireless connection... or... it can connect to one of the router's Ethernet ports using a wired Ethernet connection.

    Wired connections are always preferable wireless if possible for your Express.  Turn off the wireless router is not necessary if you want to connect to the Express using an Ethernet connection.

Maybe you are looking for

  • You can remove the back cover of the Milestone 2?

    Hi I just got my Milestone 2 today (9 December). Because I had to use my old phone for charging the battery I assembled the phone without the SIM card. I want to insert the SIM card now I can't remove the back. I try to push the lens of the camera an

  • Cannot close the dump imaq link to imaq in labview

    Hi there and thanks for opening up this post I'm still new in machine vision. I'm working on a project in Labview, but I am not able to connect to the session of vi IMAQ grab to close the session in the IMAQ vi... LabVIEW tells me that the two sons a

  • Problem with video playback... Help, please...

    I have problem with watch and listen to the youtube video in my player. I have Windows XP, Windows media player 11, Real player, player time Quik and nothing happens. The videos are uploaded but no work. I pray for the advice...

  • OfficeJet 5610xi Vista no. Scan Options HP Print and Scan update failure doctor

    Original problem was the infamous 'no. Scan Options' when I tried a scan. Installed HP Print and Scan doctor. A ran HP print and Scan doctor. When I reached the stage of the Solution Center, the doctor told me that my system needed an update. So, I h

  • Problem installing Photoshop CC 2015

    Hello world.I have a problem: I can not install Photoshop creative CC 2015 compared to the clouds. I read on the forum and on the Adobe site, and I tried to uninstall everything CC, using CC cleaning tool. Then I rebooted and installed. Then I starte