Connect an Airport Express Terminal to a non - airport Cable Modem/Router wireless

I want to use my Airport Express as a wireless adapter to connect my TV to my home wireless network. How to connect an Airport Express Terminal to a non Airport wireless router?

Not sure I understand your question.

If the AirPort Express Terminal will connect and 'join' the existing wireless network using a wireless connection... How the TV will connect to the AirPort Express?   Wireless?   Wired Ethernet connection?   USB connection?

Tags: Wireless

Similar Questions

  • How can I connect a cisco router to the internet via a cable modem / router gateway

    I have searched here but can't find the exact answer that I'm looking. I have a switch and a router cisco 1760 2950. The router has an added ethernet wic card so I have two ethernet connections available. I would like to connect the cable modem gateway the router through one of the connections on the router, then the switch ethernet. I can't get this configuration to work. There are several different ways, I saw displayed to accomlish. DHCP, without dhcp, creating a separate network and giving the e0/0 cable an ip address in the range of addresses network gateways. None of this has worked. Can someone after the commands that must be entered on the router to make this possible?

    Hello, I'm assuming that your ISP is to give addresses via DHCP...

    And I suppose also we want to implement our router DHCP in our local network to give our PCs and laptops etc...

    So what we need to do is:

    conf t

    !

    interface e0/0

    Description # INTERNET #.

    IP access-group MY_WAN in

    DHCP IP address

    NAT outside IP

    No tap

    !

    interface e0/1

    # MY LAN description #.

    IP 192.168.1.1 255.255.255.0

    IP nat inside

    !

    IP access-list standard MY_LAN

    permit 192.168.1.0 0.0.0.255

    !

    MY_WAN extended IP access list

    allow tcp any a Workbench

    refuse TCP a whole

    allow an ip

    !

    IP nat inside source list MY_LAN interface e0/0 overload

    !

    IP dhcp excluded-address 192.168.1.0 192.168.1.99

    !

    dhcp MY_LAN IP pool

    network 192.168.1.0 255.255.255.0

    default router 192.168.1.1

    Server DNS 8.8.4.4 8.8.8.8

    In this configuration, I applied an ACL for a protection to my router and my network to allow only established connections that Ive from my LAN to return to me. Anyone who tries to open a connection to your router will be refused. Everything is allowed. But you can change this option to be more specific rather than wide.

    On your switch, if you leave all ports in the vlan 1 and have as access ports, it should work.

    Hope this helps

    Please note the useful messages and don't forget to mark resolved all questions answers. Thank you.

  • A100-306 & office via Modem/Router wireless connection: access denied

    I'm trying to file/printer sharing between my laptop A100-306 and office units.
    I used the Windows Wizard to create the internet/LAN connection.

    It has been a success with the connection internet (via Belkin 54 g Wireless Modem/Router), but my "Troarn" LAN does not seem to be recognized by the laptop.
    When I query, on the laptop, My Network places/computers view of the Working Group, the page is white!

    But when I question, the office, My Network places/View workgroup computers, computers are displayed. If I try, on the desktop, for connection access is denied.

    Someone at - it suggestions?

    Hello

    -Check if you have disabled the firewall on the laptop.

    -Be sure that each computer is placed in the same working group.

    -Check the TCP/IP protocol settings.
    If a computer has the IP 168.192.50.1 the other should for example has 168.192.50.2 and so on.

    -If you want access to all records, you must set the rights for sharing this folder.

  • HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

    Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    SN: [personal information]

    REF: CM750A

    FW: CKP5CN1516AR

    Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

    After that, the printer asks to reset and it restarts with wireless off.

    I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

    I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

    I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

    Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

    I found the solution:

    connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

    In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

  • The connection between your cable modem, router or access point, and Internet are broken.

    What is the average message "the connection between your cable modum, router or access point, and internet are broken" and how to fix it?  We use internet provider time warner.  Can I access online using mini jetpack, but not through time warner.  Is the problem with our internet service or hardware problem?

    Hello Terri,

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem may occur because of damaged or incorrect network settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the network troubleshooting and check.
    Reference:
    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Note: You can run utilities times 'Internet connection' and 'network card'.

    If this does not help, use method 2.

    Method 2:
    Reset TCP/IP and check the issue.
    Refer to this article:
    How to reset TCP/IP using the NetShell utility
    https://support.Microsoft.com/en-us/KB/299357

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • No internet connection with C6300 only cable modem/router - No. Ethernet cable plugged

    About once or twice a week I wake up my desktop PC and see an icon (bottom right) which indicates that I have no internet connection. When I run the troubleshooter network (right-click on the icon) it says to plug in my ethernet cable. I replaced the cable with another know good cable, but the problem continues to return (though intermittently). If I unplug the ethernet cable from the port of my C6300 Netgear and plug it back in the same or another port, the internet connection is restored. I'm on Windows 10 edition 64 - bit OS on my desktop tower PC (Dell). My internet provider is Cox Communications through their cable with up to 100 Mbps of speed. My Netgear firmware version is V1.02.20 to help you can provide me to solve this problem would be appreciated.

    Well, it has been a few weeks of performance without error since I replaced the Netgear C6300. So I close this investigation as "FIXED."

  • How can I connect Windows Fax and Scan? I have a cable modem

    I have Windows 7 and I'm using Cablevision as my ISP. Installed a Motorola Surfboard Cable Modem SBV5120. I want to use the program Windows Fax and scan to send a fax, but Setup search a modem and can't find what I have Cablevision. How can I use the Windows Fax?

    Fax requires the use of a standard phone line, no cable.

  • If I can do an Airport Extreme mobile network with a modem/router cable xfinity manufactured by Cisco?

    Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?  The modem-router Cisco/Xfinity put into bridge mode?

    Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?

    Yes, if the Airport Extreme will be connected to the Cisco DPC3939 back using wired Ethernet wired, permanent.

    The modem-router Cisco/Xfinity put into bridge mode?

    No. I you have done this, the Cisco/Xfinity device would only act as a simple modem... so it would not be a wireless service to all.

    A note of caution here... the support document you are referencing... Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)... use the examples that are long outdated does not follow with the versions present on a Mac AirPort Utility or iPhone/iPad.

    There are some good general information in the document.

  • Problems with AirPort Extreme and Qwest Modem/Router.

    I have a Qwest ActionTec 1000 DSL VDSL2 gateway and want to disable the functions of router wireless and those through direct AirPort Extreme. I know that in the Modem I have to disable the functions of addressing and turn them in the AirPort Extreme to avoid address conflicts, but what are the settings I need to change in both devices? And what is "A Transparent bridging" on the side of the modem?

    But what are the settings I need to change in both devices?

    Sorry, we can't help on the settings for the modem/router, because it would be a question of Qwest as to if this is even possible and if so, if Qwest will support this type of installation. Sometimes the ISP lock modem/router settings, and although it seems as if you can change the basic configuration of the unit, you can really.

    Yes, it is possible that another user of Qwest has done with the same modem/router you have and an AirPort Extreme... and may know the answer... but the chances of the person who holds this information also to see this post are slightly above zero. But, I guess it's possible.

    If the modem/router can be configured to operate only as a simple modem, then the next step would be to get your Mac connected directly to the modem to test the connection in this way. If Qwest is going to help you, they will do it no doubt with your Mac connected directly to the "modem" as well.

    Once you know the exact details of the PPPoE authentication to establish a connection, these parameters can be transferred to the AirPort Extreme and removed from your Mac. To do this, you reset the AirPort Extreme back to default and then put settings in place again. The installer should detect the PPPoE connection and then ask for your login information.  After this, the correct settings apply to AirPort Extreme during the installation.  You can still use the same wireless network name and password you used before if you wish, or set up a new network name and password.

    PPPoE on the routers of the airport, at least in my experience, was not a reliable way to connect when I tried this in the past, but you don't really know how well... or even if... it will work until try you it. Unless you really want the airport to distribute IP addresses to devices on your network, things would be a lot more simple if you went ahead and used the modem/router "such what" and then let the airport works in Bridge Mode to transfer information in connection with network devices.

    When you have the modem/router converted to act as a simple modem and made a successful connection using your Mac connected directly to the "modem", post back and we can help with the configuration of the AirPort Extreme if you need more advice.

  • I am connected to the Internet, but my new Airport Express Terminal still flashes orange. Any ideas?

    I am connected to the Internet, but my new Airport Express Terminal still flashes orange. Any ideas?

    The utility airPort on your Mac or iPhone / iPad is going to tell you why the AirPort Express is complaining... and offer a fix for what he thinks is wrong.

    If you are in need of more details, we will need to know if you are using a Mac or iPhone / iPad.  Mac, what operating system they are running to be the case as well.

  • I just bought a new Airport Express Terminal. It connects to my laptop, but not my other devices such as iphone/ipad. Any suggestions?

    I just bought a new Airport Express Terminal. It connects to my laptop and I have working internet, but my iphone/ipad do not work with it. They say they are "connected" to the wireless network but nothing works / charges on other devices. I tried to forget the network, by renewing the lease, etc and nothing works. Any suggestions as to why my laptop works but not other devices?

    What is the serial number and model of the modem you use?... or... The AirPort Express connects directly to the Ethernet wall port?

  • I want to use a Terminal Airport Express to extend network provided by my Fios router/modem without going through another airport base.  Is there a way to do this?  I understand that Apple does not support this, but surely there must be a way to do this.

    Can someone tell me how to set up an Airport Express Terminal to expand Network provided by my Fios router/modem without going through an airport as a base?  I understand that apple does not support this use, but my applecare Advisor said it's possible.  Thank you!

    Unfortunately, your AppleCare Advisor is wrong if he or she has told you that an AirPort Express to extend wireless signal of a Fios router/modem.

    Function of "Extend a wireless network" Apple is an exclusive feature that was designed by Apple engineers to extend the signal from another wireless only router from Apple. Thus, the AirPort Express... or any other router Apple besides... would not be able to extend wireless a Fios network.

    SO... you have the possibility to locate the Airport Express where it is needed... And... Connect it to the Fios router/modem with a permanent, wired Ethernet cable connection, then the AirPort Express can 'extend' in this way.

    Or... If you are ready to add a second AirPort Express, connect the first near Fios modem/router with an Ethernet cable, then the second Airport Express could extend the signal first Express wireless.

    Another way to say the same thing, is that if you want an Apple AirPort router to extend wireless network... then you need two Apple routers to achieve this goal.

  • Connect AirPort Express to lemon (Rogers Rocket) Wireless Modem/Router

    I just got Rogers Wireless internet new modem/router Hitron.  I use modem/router mode.  It's great. Very fast and a lot of range. Covers all 3 floors of my house.

    I want to connect an Apple Terminal to my Hitron router with an ethernet cable and put the Hitron in Bridge mode. I want to continue to use the Hitron router as my main and only router.

    However on another floor, I would use an Apple Airport Express connected to my stereo with a jack 1/8 '' to play my music wirelessly from my iTunes from Apple.

    To do this, I need this Apple Airport Express Terminal to 'find' the Hitron router.  How can I get to find the router Hitron?

    I guess that you have a current version or recent of the AirPort Express with the default settings.

    As long as the AirPort Express is located where it can receive a strong signal of the modem/router...and wireless Hitron the Hitron aircraft provides a wireless signal that uses industry standard wireless settings, the AirPort Express can 'join' the wireless network. Wired Ethernet is not necessary.

    Note that the AirPort Express will not "spread" or "repeat" the signal from the router/modem lemon to provide additional coverage of wireless signal wireless, but it can be used to join the wireless network and provide a signal of airtime for your stereo.

    Simply use a Mac running a current or recent operating system, or an iPhone/iPad and configuration "Wizard" Apple to set up things upward. The wizard will automatically offer the correct configuration to 'join' the wireless network. All you really need to do is to enter a device name that you want to use for the AirPort Express and the password of the wireless network and confirm.

    Start the wizard by clicking on AirPort Express under the title of the new AirPort base station.

    On an iPhone or iPad, the screen looks like this:

    In the example below, the wizard has detected a network named "2WIRE902" for the AirPort Express join. You will see the name of the wireless network that provides the Hitron modem/router on your screen. Just enter a name of device for the Express, then type the wireless network password, then type it again to verify.

    Click next at the bottom right of the window and the AirPort Express displays a green light for a minute or two and you're done.

  • Connect an airport express to extend wifi

    I'm not tech savvy... I had an addition on the House and our wifi is weak. I have a Timecapsle and tried to plug an Ethernet cable and bring it up to the addition where I would place the Airport express.

    I can't work. Can someone walk me through the settings?

    I currently have Ethernet plugged into one of the ports in the timecapse and then plugged into the Ethernet port on the Airport express

    We need a little more information to be able to help – tips and tricks for airports depend on the model you have and the computer that you use to configure the airport.

    Your AirPort Express look like this?

    Or, your AirPort Express there than a single Ethernet port, like this?

    If it has only one Ethernet port, that we need to model on the side of the unit number. It is difficult to see gray inscription on white background, so you can need good lighting and reading glasses to see clearly. The model number starts with an 'A' follow-up of four digits. Post back with that info, please.

    The next point, we need to know what device you are using to configure the Express... .a mac?... a PC?... an iPad or iPhone?

    If you have a Mac, we need to know what operating system they are running. If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

    Finally, we assume that you have tested the Ethernet cable that will connect to the time Capsule to the location of the AirPort Express Terminal by connecting a computer or laptop to the Ethernet cable temporarily, turn off WiFi and checking to make sure that you get a good connection Internet in this way. If you can, then the cable works fine.  If you can't get a good connection, then you will need to resolve things first, before you can try to plug the AirPort Express Terminal.

  • How to connect the Airport express as an Extender for airport extreme to El Capitan

    I have a model extreme A1521 airport and a model express airport A1392 and upgraded my OS to El Capitan. I want to use the express as an Extender for the extreme because my old House is long and has thick walls. My problem is that Airport utility will not 'see' the express, regardless of its proximity to the main router (extreme). I tried to move and reset.

    Of course, as soon as I get the utility to see, I need instructions on how to configure the express as a booster for my extreme.

    Any ideas?

    Unplug the Express and put it in the same room as the AirPort Extreme.

    Put power on the Express for a few minutes, then hold down the reset button on the back of the Express for 7 to 8 seconds and release.

    Allow a minute for the Express to restart

    Click the WiFI icon at the top of the screen of the Mac

    Look for an announcement of the new AirPort base station

    Click directly on the AirPort Express Terminal

    When you click on AirPort Express, the "Wizard" will open and take a few seconds to analyze things, and then see a screen that looks like the figure below, except that you can see your cameras.

    Type a short and simple name that you want to call the Express

    Click next

    The installation wizard will take care of everything for you

    When you see the message Setup is complete, unplug the Express and move to halfway between the AirPort Extreme and the area of the House that needs more coverage of wireless signal

    Turn on the Express and you're all set

    Important note... the Express to expand the quality of the signal it receives. About half of the potential speed on the entire nextwork is lost when you extend using a wireless connection between the airports.

    It would be much better if you could connect the Express to the extreme by using wired Ethernet wired, permanent, since there is no loss of signal via the Ethernet cable and there is always a lot of loss of signal through the air, the (thick walls especially) walls, ceilings, etc.

Maybe you are looking for

  • Cannot move the nhs mail in the trash more mammals

    Use mail nhs voicemail for years. In recent weeks impossible to delete the mail I receive the error message that it cannot move the message to the trash. Works great on iMac, but not on the Macbook. El Captain running on both systems. Can anyone help

  • Since I've upgraded to Firefox 35.0, the site of the New York Times causes Firefox run slowly.

    The site of the New York Times is the only site because of Firefox to experience this extreme slowness. Firefox update made no difference. To view the website of times without slow, I had to add the site to the blacklist of the JavaScript to YesScrip

  • How to enable hardware acceleration in FireFox 31

    Please tell us how to enable hardware acceleration in FireFox 31. All of my graphics and other hardware/software is current and up to date. I also paired to my toolbar to bookmark up to 20 entries less. FireFox is so slow that a few tabs open cause t

  • Specify the samples only to change?

    No doubt a variation of this has been requested before, so my apologies, but I'm unable to find anything. I use a PCIe-6537 and try to generate a long sequence (say 2 seconds) using C. Is it possible to only specify some samples? Or do I need to spec

  • Backup XP, no floppy drive

    I just made a backup of my system XP together on an external hard drive. However, I did using the XP Backup utility, which requires a floppy disk at the end right. I don't have a floppy drive! The backup file seems to have saved saved on my ED. It wi