Connect as a massive storage

I would like to know how can I connect my K1 to my laptop as storage massive o something like that if I can just drag photos, movies, applications, etc. and download the videos, photos and all I want without the tools of lenovo, which I think helps not so much. is more limiting than helping the manipulation of the K1.

-J' have win XP BTW.

So, what can I do to download the photos from the K1 to my laptop? I can also connect via WiFi as it says in the tutorial to connect via USB and WiFi.

Win XP SP3 is the minimum required.

Tags: Lenovo Tablets

Similar Questions

  • Connection of external USB storage

    I connected an external hard drive (WD "My Passport", 300 GB) USB to my router (Cisco EA6500). The drive has been formatted to NTFS. My services 3 computers router.

    I looked at the Linksys WiFi Smart 'External storage' tools and see the FTP server is 'On', DLNA is 'On' and ensure access to records is 'On '. Access to the files tab all my computers have the permission to write & Edit and Delete actions.

    The external drive appears in the LinkSys WiFi Smart as a 'Network Device' online program.

    But it does not appear in Windows Explorer (or file such that named in 10 Windows Explorer).

    I'm unable to access this storage to record data, how do I do so?

    Hi, rszanti. Were you able to map a network drive on your computer? Network drive mapping is necessary so that you can access a device USB storage or storage network (SIN) attached to your router.

  • Series Xperia Z5 + 6 Android: no connection to SDXC mass storage?

    Why Z5P can only connect to the computer via a direct phone connection? Mass connection to SDXC storage is not supported and no option to select mass storage when auto select option displays.

    Mass storage mode (MSC) is removed from the Xperia devices running Android 4.4 and later and we can't. In order to facilitate the transfer of data via a cable, the Xperia devices are supported by the Microsoft standard, the MTP (Media Transfer) Protocol, which allows you to easily transfer the content back and forth between your device and a computer.

  • How can I prevent users to connect to a USB storage device?

    I would like to block the connection to a device of USB storage except adminisator account?

    Referring to the following link, there are no instructions on how to do it.

    Anyone have any suggestions on how to do this in Windows 7?
    Thanks in advance for your suggestions :>

    http://support.Microsoft.com/kb/823732

    You need to remove the menu setup USB device, as if it was never installed. Physically

    Remove the USB device - run USBDeview and remove it - Reboot - then set up the
    Users do not allow a USB - reboot and you connect as a user - NO ADMIN - try to insert
    the device.

    You can get more ideas on the TechNet forums I listed previously.

    You have really need professional or above to be able to set security policies.

    Rob - SpiritX

  • Which CMD is adding connection policy for the storage of vHBA initiator power group sell

    Hi all

    I'been student UCS power tool script.

    I'm trying to configure the profile Service UCS and Local Zoning with power shell script.

    But I do not know what cmd adds storage to vHBA connection policy group Inititator. (see image below)

    I would add the linking strategy of storage for connection storage filed under vHBA initiating policy name groups with Power Shell script.

    Please let me know related power shell cmd.

    [email protected] / * /.

    Thank you

    Take a look on

    http://www.thomasmaurer.ch/2013/10/Cisco-UCS-PowerShell-ConvertTo-ucscmd...

    This will give you the answer to your question.

  • VM connection to an external storage array

    Hello everyone

    Has anyone connected a virtual machine to an external array as a Powervault MD1000 external storage array?

    Reference Dell MD1000

    http://www.Dell.com/content/products/ProductDetails.aspx/pvaul_md1000?c=us & l = in & s = BSD & CS = 04

    Hello

    You can either use a VMDK created on the MD1000, or you can use http://itknowledgeexchange.techtarget.com/virtualization-pro/vmware-esx-storage-how-to-get-local-storage-to-act-as-a-raw-disk-for-vms/ as instructions to do what you want to do.

    Best regards
    Edward L. Haletky
    VMware communities user moderator, VMware vExpert 2009
    ====
    Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
    Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

  • Massive storage of decompression problem

    I was trying to download an important file from a friend (. tar.gz), and when I went to unpack it (in the archive utility), the file is immediately explode fills almost all the entire my drive (4to). (The original file was only 2 GB)... The decompression progress were only to halfway done, when all of a sudden, the system attracted my attention on disk space is almost full. I force you quit the application, but the system still says the space is used by something upward. This file decompression failed hid? How can I recover this space without deleting I can't once I have remove the applications? Help!

    Omni DiskSweeper can show you the exact size and location of all your files. It will be the inventory of your disc from files that occupy more space. It can also give you a fairer read disk space than the Finder or storage tab of the about this Mac. If you want you can even delete files from OmniDisk Sweeper. But beware, some items may be important for your system.

    But it seems to be some kind of malware, making hitchhiking in the tar ball. For that I download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

  • 63 error to TCP connection open in Simple data Client.vi when connecting to the network storage device.

    Hello

    I tried the simple data client and simple example of data server. I tried this example to connect to a NAS device. My laptop properly communicates with the device since I ping the address of the NAS device and discovered it works perfectly fine. Also, I put the static IP of my pc even as the NAS. So everything I've done. But when I run the program giving the ip address of a NAS device, it shows an error 63.

    Error 63 to TCP connection open in Simple data Client.vi

    Possible reasons: LabVIEW: serial port receive buffer overflow. = LabVIEW: the network connection was refused by the server.

    Why is happening. What can be done to solve this problem. Thanking you.

    vindsan wrote:

    What is the firewall of the SIN.

    Yes, it is very likely. Try disabling the firewall and try again. If the code works when you run the Server & client on your machine, but not when you run the server on your NAS and client on your machine (assuming you have entered the correct port for the NAS server), then it is very likely to be a firewall problem.

    vindsan wrote:

    Server that is listening is no longer VI also means what.

    Your VI server listens only once for a connection after receiving an incoming connection (or it expires after 60 years), he stops listening and the port will be more open for incoming connections - you must re - run the VI for another connection. With your code, you must run the VI server and then run the VI client in the 1960s, so it's not expire.

  • Problem with connecting to the usb storage to the EA4500 via ftp from the internet

    I have trouble to configure my EA 4500 as an FTP server.

    I followed all the instructions according to the manual, but cannot access the USB I connected tot the EA4500 of the internet.

    When I try to connect my own network, everything works fine.

    The configuration I have at home is as follows:

    Cable modem ISP--> EA4500--> all computers.

    As said, I use the EA 4500 as an FTP server.

    If I install an FTP server on one of the computers on my home network and transfer the correct port on the EA4500 for this PC everything works fine and I have access to the internet. Unfortunately, it won't work when using the USB plugged into the EA4500...

    Any help would be great!

    TIA!

    When you go to the EA4500 configuration page, have you enabled the FTP server function?

    When I set mine up, I have was go the section when you set up the USB (shares, etc.) and turned on FTP.

    In the security of the router Security tab, I uncheck the 'Block anonymous Internet requests.

    I do know for sure that you have to uncheck this box, but I always turned off this box, just out of habit when setting up a llinksys router.

    In any case, this is what I did and it worked fine.

    The only other thing I can think is... Your modem is perhaps a nat router. And you have the EA4500 operating on a different subnet. And your modem may possibly be block it.

    What is the brand and model of your modem.

  • Differences between the ISCSI connections to the storage in vSphere 4.1 and 5.0.

    I'm in trouble of setting up the connections of storage in a new VSphere 5.0 test environment. In our environment VSphere 4.1, it was possible to create a virtual switch add two Broadcom NetXtreme II 5709 NIC. Set assets. IP Hash value as load balancing. (LACP Etherchannel on physical switches) This configuration uses a grain port and a single IP address. Then add our NetApp NFS storage and ISCSI Equillogic storage. In VSphere 5.0, I can't create this same configuration. I have to create separate with separate IP addresses vmkernal ports? The idea was to have redundant connections to the storage and flow of these two NETWORK cards. Possibly adding additional if necessary to the futuer NETWORK cards. Any help with this would be greatly appreciated.

    How can I work around this:

    "VMkernel network adapter must have an active link exactly and no waiting rising to be eligible for the iSCSI HBA connection."

    I can certainly say that the way which allows you to configure the iSCSI Multipathing is incorrect.

    The main idea is to let Native Multipathing Plugin to decide what network path to choose, not the vSwitch.

    At the level of the network layer, you must have 1 VMK by a physical NIC.

    This technique applies as well for vSphere 4.1 and 5.0, but with the 5.0 it is configured easier and more quickly.

    Here's a very brief consequence of steps

    1. get 2 VMK interfaces and assign an IP by each VMK.

    2. set each VMK to use only one physical NETWORK adapter

    3 GB with storage iSCSI software adapter, turn it on and bind your VMKs 2.

    4 connect to your iSCSI storage space

    5 rescan devices, create the VMFS datastore

    6. set the desired load balancing VMFS method or just set up a prior default create new VMFS

    and it is strongly recommended to read this guide - http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-storage-guide.pdf

  • HA restarts the virtual machine if the storage connectivity is lost? If how is HA needs to be configured?

    We plan to go forward with a single dual-port HBA in each of our ESX servers. My concern is that the HBA becomes a single point of failure. HA supports restarting the virtual machine which lose connectivity to back-end storage. We did some testing and it does not appear that HA does not handle this. Even when 'enable us VM monitoring' the machine virtual do not restart on other ESX servers in the cluster that they hang just basically. I've read a few articles which seem to indicate that it should work, but I'm not able to get there. Any thoughts there?

    HA checks the availability of default ESX host. There is an option to monitor the heartbeats reviews, as well. Maybe this will do, but sometimes a guest still works for awhile even if the disk is lost. And as for a long time VMware tools send heartbeats...

    AWo

    VCP 3 & 4

    Author @ vmwire.net

    \[:o]===\[o:]

    = You want to have this ad as a ringtone on your mobile phone? =

    = Send 'Assignment' to 911 for only $999999,99! =

  • iPhone 6 Plus running on IOs 9.2.1 shows reduced storage? PLEASE HELP, END OF WIT HERE!

    So my iPhone 5-6 months 6 more 16 gb updated to ios 9.2.1 has recently shown random filling of storage space. No new applications, photos or music of any kind is added and still storage keeps decreasing randomly over time. When I connect to iTunes, the storage the bottom bar shows a huge purple bar that takes a lot of space, marked 'DOCUMENTS AND DATA'. Now, is this a deal? Because I don't remember see also high amount of space occupied by this purple thing before yesterday. The devil what's up?

    I've tried everything. I even backed up and restored the phone with iTunes. Back to normal and my storage space, everything has been shown 4.4 GB free. For a few hours, it kept decreasing at random and this morning there is 550 MB free space. This happened yesterday before the restoration too and he continued until the storage

    space dropped to 0bytes and the pop - up messages about insufficient storage, started upward. Again, there is NOTHING of AGAIN BEING ADDITIONNES. I use data only available cell phones and WhatsApp. Is there an app buggy in the background, adding data and additional documents? If so, how do you know what app? In practice, all applications show same storage space, even if the free space overall continues to decline. What gives?

    Help, please!

    New user of Apple. Gawd, I'm bored of Android.

    I have the same problem... After I updated my iPhone, I have none left for storage. I counted the number of MB my use of apps (3 GB) and my iPhone says that I have use 11.6 GB. WHAT IS PAST ON APPLE?

  • Phone will not connect to the casting of motorcycle USB?

    I can't get my phone to connect with motorcycle Cast USB. I use Zumocast for the wireless, but I wanted to use the Cast of the bike to sync my music and videos via USB. When I plug the USB in all starts automatically. A screen appears and tells me of his preparation for my camera, then another screen appears telling me to wait, it loads the content. However, this second screen has a large yellow triangle with an exclamation mark in it and lists of things to try if you have connection problems. I tried all the USB options that I have on the phone, he seems to force the connection to USB mass storage, so I guess that's where it should be. Any help would be appreciated. I thought it might be a problem of SD card, but I'm not having problems with the map I can say.

    It turns out that it was the SD card. After reading a few posts, it seems that you cannot have all the apps installed on the SD card, so I cleaned all the. It does not solve the problem of the bike to ride, but I lived some issues with messages to appear during a download app like "not enough memory to SD card", so I hope that he will address this issue. Time will tell. What seemed to fix my bike mount question was a stopover of force on an app called Evernote. I read this solution on another post, and that seemed to take care of it. It seems that Evernote has been attached to the top of the SD card and not let disassemble.

  • What would be the settings on iPhone to reduce storage of pictures on the phone?

    If I am connected to iCloud photo storage, what settings on iPhone.  I want to avoid having pictures stored on the phone and taking too much space.  I chose Optimize iPad storage?

    If you use iCloud photo library (settings > iCloud > Photos > iCloud photo library), you cannot avoid having all the pictures stored on the iPhone or iPad. The more you can do to reduce the required storage on the device is to activate settings > iCloud > Photos > iPhone (or iPad) Optimize storage.

  • Can I use a USB storage in a cRIO-9064?

    Hi all

    For a project I need to have more storage space on a cRIO. I'm currently looking the cRIO-9064 with USB port.

    Is it possible to connect a USB mass storage device this port and use it to IO files?

    PS. I am aware of the c modules that offer an sd card slot, but my budget is high enough for the latter.

    PPS. If you have examples of code, you can quickly spent in your answer would be great.

    Sandra will be given.

    Thank you

    Hi Freel, it is possible with all the objectives of the RT that have a USB device port. The USB key will be mapped to the target of RT U drive. The cRIO-9064 running the Linux RT operating system, so you will need to use the notation of oblique way. See this article for more details:

    http://digital.NI.com/public.nsf/allkb/65C685BD7EC10D6B86257D07004A9825

Maybe you are looking for