Connect between two different applications. A call to the other application.

Similar Questions

• The way of writing to a wireless bridge between two different routers.1:broadband and dir 2:dlink 605 l

  I want to bridge.and wireless I can't do that... Please send me how to write to a wireless bridge between two different routers.

  1:broadband
  and
  2:Dlink dir 605 l,

  Hi Mohammed Ehsan Jourah,.

  Thanks for posting the request in the Microsoft community forums.
  I understand that you need to know how to make a wireless bridge between two different routers

  What version of the operating system is installed on the computer?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  You can try the steps at the bridge between two different routers wireless.
  a. determine the coverage area. When using two or more routers, the coverage area should be divided, and each router should be placed in a central location in each subdivision. If you add a wireless router to an existing network, this may mean moving the first router.
  b. decide which router is the main router. The main router is connected to the Internet, a LAN cable or other networks. It should be as close to the wired network connections or who has the best line of sight to another wireless network. In addition, the main router should be a high range router, allowing large tables of State and more users.
  c. buy a spare antenna, as the antennas that come with most routers do not have very good range. Quality omnidirectional antennas can push the range and signal strength of each of the routers, which, in turn, will reduce the cost by allowing routers less cover more space overall.
  d. deploy the primary router carefully. This router is the most important and requires most of the time of installation and options. Set the WEP (Protocol) encryption Service Set Identifier (SSID) and wireless, set up the Internet connection and test the router with some clients (computers). Once you get the main router deployed, deploy other routers should be easy.
  e. deploy the secondary routers, which must be configured to operate in "mode of transition." Secondary routers should be deployed around the perimeter of a large area or 'hot spots' where users placed - for example, will convene a bench Park or the table.

  Links:
  Create a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

  Add a connection to a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-connection-to-a-network-bridge

  Hope this information helps you. If you need to get help or information with decision-making wireless bridge between two different routers, I'll be happy to help you.

• How to create a Pool of connections to two different databases in OBIEE

  Hello

  I have a requirement where few reports coming from databases and a few others to another database. I created two pools of connections and added the frame connection details. But when I created the report I get error as below.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 17001] Oracle error code: 942, message: ORA-00942: table or view does not exist to the call of the OCIStmtExecute OIC. [nQSError: 17010] Prepare the SQL statement failed. (HY000)

  Now, I would like to see if I can create a pool of connections to two different databases. If so, how that happen.

  Thank you!

  Hi Antonio,.

  Cross database joins are possible, no problem for it. But you do not do so in an object of unique data base in the physical layer using 2 pools of connections connection to the source A and B, then adding objects to A and B children of your unique database.

  You create 2 databases in the physical layer, each with its own connection pool, then you can do your knuckles crossed on the physical schema.

  As a picture is worth a thousand words, take a look:

  

  The physical diagram uses objects of A and B and define the rules of the join between them, it is a cross-database join. But in the physical layer of the database A and B are 2 separate objects each with its own pool of connections.

• Bluetooth connection between two 7290

  Hello

  I want to create a connection between two BlackBerry 7290 with OS 4.1 I found something with BluetoothSerialPort, but if I pair the und devices 2 start the application I get no BluetoothSerialPortInfos with the static method of the BluetoothSerialPort class.

  I tried to create a BluetoothSerialPort without an Info but that does not work. I get an IOException to Scripture.

  public boolean keyChar (key char, int status, int time)

  {

  If (key is Characters.ENTER)

  {

  Try

  {

  _port = new BluetoothSerialPort ("Hi there", BluetoothSerialPort.BAUD_115200, BluetoothSerialPort.DATA_FORMAT_PARITY_NONE |) BluetoothSerialPort.DATA_FORMAT_STOP_BITS_1 | BluetoothSerialPort.DATA_FORMAT_DATA_BITS_8, BluetoothSerialPort.FLOW_CONTROL_NONE, 1024, 1024, this);

  H = 'hi. '

  _port. Write (h.GetBytes ());

  }

  catch (Exception e) {Dialog.alert (try ()) ;}}

  }

  }

  At this point, I get the Exception when writing. Can someone help me please? Martin

  When you pair the Bluetooth devices, they exchange a list of services they support.  This means that you will need to have a server side application up and running which listens to the incoming Bluetooth connections before they are matched.  Otherwise, the other Bluetooth device will not know about your application and will not be able to connect to it.

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• Screen flashes like a strobe light between two different "parts".

  Well, this is going to be hard to explain...

  The short version: my screen is spazzy.

  The long version: welp. It flashes like a strobe between two 'parts' as I call them. Part A is what I'm supposed to be viewing (browser, screen, scanner, antivirus, etc.) and part B being one of several things. The blue and black lines vertical, multicolored stripes, my desktop background. And it just flashes back. Sometimes when I move my mouse over the flashing area it goes back to what ever it is supposed to be (instead of my background OR task bar, it's just my taskbar) and, so, sometimes not. Sometimes, compounding the problem.

  It's driving me crazy.

  And not only it is completely in the path, it slows down my computer by my college courses online a pain in the thigh.

  I ran Webroot SecureAnywhere, CCleaner and Defraggler. All to nothing does not.

  Any help would be greatly appreciated. I'll even write a paragraph full dripping with disdain, if it's something stupid.

  Original title: what the hell is happening with my screen?

  HP provides the drivers for your computer.

  If there is no Windows 7 graphics drivers available, there is nothing we can do to help you as a older laptop, graphics would be Onboard (part of the motherboard).

  These are the two models for the number you provide:

  HP Compaq nc6400 core Notebook PC model

  • HP Compaq nc6400 Notebook PC

  I suggest that you ask in the HP Support Forums for further assistance with this:

  http://h30434.www3.HP.com/

  Good luck.

• A project, two different applications with different arguments

  Hello

  I have a project where I need to put two different applications, so that the icons appear on the device, each of them sends an input parameter. According to this setting, the backend will be development or production.

  How can I do?

  Thank you

  If you have two applications, you can create two different projects, can't you? or maybe the alternative entry points may be of interest to you.

• Connectivity between two nodes of Virtual Box

  For a few days, I try to establish the network connectivity between two nodes OEL (Oracle Enterprise Linux) in Oracle Virtualbox. I tried everything I have found Google, but still nothing works, everytime I try to ping from one node to another node Hostname/IP is showing unknown host. All the advice everyone here will be great for me.
  
  Published by: 918868 on October 30, 2012 02:30

  When you create a virtual machine, by default VirtualBox allows virtual network card and selects the "Network Address Translation" (NAT) mode for it. In this way the guest can connect to the outside world using the networking of the host and the outside world can connect to services on the feedback that you choose to make visible outside of the virtual machine.

  This default configuration is good probably 95% of users of VirtualBox. VirtualBox is, however, extremely flexible in how it can virtualize networks. It supports multiple virtual NICs per virtual machine, the first four that can be configured in detail in the Manager window. Additional network cards can be configured on the command-line with VBoxManage.

  Source: http://www.virtualbox.org/manual/ch03.html#settings-network

  For more details, please see:

  Virtual networks
  http://www.VirtualBox.org/manual/CH06.html

  Concerning
  Girish Sharma

• Utility FNDLOAD between two different servers

  Hi friends,
  For the phase of the UAT of our project, we have a new server (server with RedHat Linux ES4 HP).
  We need to migrate reports form the unfounded (IBM - AIX 5.3 p) server to the new.
  FNDLOAD works between two different servers?
  If not, please tell me the reason why it doesnot work between servers.
  I would also like to know if there is a way to migrate data between two servers.

  As indicated in the documentation, it does not work between servers. You export the metadata and get an output file. Then, you take the output file and transfer it to the new source. Complete with examples, including the necessary part of XDOLoader.

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• I have two computers 1 an IMac and the other a lenovo pc...

  I have two computers 1 an IMac and the other a lenovo pc... installed IMac after effects with no problems, but when I registered the PC I install failure then he said something about my visual C++ is not updated when it is.

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium

• Data connection between two applications

  Hello world

  Is there a way to open a connection of type 'stream' between two applications without using the file system?  Writing on file seems too gross.  Surely someone does this!

  What I found so far:

  Object 'Event' does not seem to do... DOM seems to be communication within an application or suite.

  "Socket" seems to be ruled out by security, but no official word on this issue...

  "Then" explicitly says that only one application can access a serial port at any time...

  Class interface 'Connection' seems to have many children (taking one) but all seem to be dead ends.

  Anyone?

  Thank you

  DD

  I suggest using a global event. You can attach an object to the event and look to the other application.

  See the documentation for the API of ApplicationManager.postGlobalEvent () and the GlobalEventListener interface.

• back-to-back connection between two virtual machines on different ESXi servers

  Assume that a name of Virtual Machine VM1 is on ESXi Server 1 and Virtual Machine name is VM2 exist on ESXi Server 2.

  We can configure two Virtual Machines back to back as connect us two physical machine back to back via cross cable. is this possible?

  Sorry for typo's fault, should be separated vswitch, with dedicated physical network card adapter

• Problem set up RV connection between two sites

  Dear all,

  I'm putting a replication for some virtual machines from the production site to a recovery site. The two sites are on ESXi with vCenter 5.5 5.5 with their own AD domains. The connection between them is done with customer VPN Cisco of DR site in Production site.

  I installed SRM 5.5.1 on two places and I was able to successfully combine the two sites. The State of them is CONNECTED on both sites. On both environments, I deployed unit of replication vsphere and that they are properly registered on the two vCenters.

  The problem is that when I try to configure the connection of VR, I get the following error:

  VRM Server generic error. Please see the documentation for troubleshooting information. The detailed exception is: '"HmsServiceInstance" thrown an unexpected exception "java.net.UnknownHostException' with message 'siteB.dns.name' when calling method of managed objects' getContent".

  I get this error from two different points.

  I can't do a ping on the two sites using the FULL domain name and I've tried the following article:

  VMware KB: Configuration to connect to the VR in VMware vCenter Site Recovery Manager server reports the error:' managed objectives...

  Could you please help me solve this problem.

  Thank you

  Aleksandar Aleksandrov

  Hello

  In fact the two devices needs a connection between them as they periodically exchange messages for the two sites must be able to connect to vCenter Server port 80.

  Thank you

  Dzhem

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}