Connect fans double static pressure to the R4 Aurora system fan connector.

Similar Questions

• Existing connection had to be closed by the remote host

  Need help with this error
  I have a dev and a uat environment.
  I have a small form that I use as a method to call a web service. Essentially, the form contains a web service URL text box.
  If I call the shape on the dev and pointer to the service web dev, it works.
  If I use the form on uat and point the service web uat it works.
  If I use the form on UAT and call the web service on dev, it works.
  However, if I use the form on the dev and point the web service uat I get this error:

  In the Application Server error ' / '. An existing connection was to be closed by the remote host Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.

  Exception details: System.Net.Sockets.SocketException: An existing connection was to be closed by the remote host

  Source error:

  The source code that generated this unhandled exception can only be shown when compiled in debug mode. To do this, follow one of the below steps, then request the URL: 1. Add a "Debug = true" directive at the top of the file that generated the error. Example: <%@ Page Language="C#" Debug="true" %> or: (2) add the following section to the configuration file of your application:                 Note that this second technique, all the files in an application to be compiled in debug mode. The first technique will make only this file to be compiled in debug mode. Important: Running applications in debug mode causes a memory/performance load. You must ensure that an application has debugging disabled before deploying to the production scenario.

  Stack trace:

  [(0 x 2746) SocketException: an existing connection was to be closed by the remote host] System.Net.Sockets.Socket.Receive (Byte [] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) + 73 System.Net.Sockets.NetworkStream.Read (Byte [] buffer, Int32 offset, Int32 size) 131 [IOException: unable to read data from the transport connection: an existing connection was to be closed by the remote host.] System.Net.Sockets.NetworkStream.Read (Byte [] buffer, Int32 offset, Int32 size) + 294 System.Net.PooledStream.Read (Byte [] buffer, Int32 offset, Int32 size) + 26 System.Net.Connection.SyncRead (request of HttpWebRequest, Boolean userRetrievedStream, Boolean probeRead) + 297 [WebException: the underlying connection was closed: an unexpected error occurred during the reception.] System.Net.HttpWebRequest.GetResponse () + 5399741 _Default.btnTestUpload_Click (Object sender, EventArgs e) + 532 System.Web.UI.WebControls.Button.OnClick (EventArgs e) 111 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) + 110 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent (String eventArgument) + 10 System.Web.UI.Page.RaisePostBackEvent (IPostBackEventHandler sourceControl, String eventArgument) + 13 System.Web.UI.Page.RaisePostBackEvent (NameValueCollection postData) + 36 System.Web.UI.Page.ProcessRequestMain (includeStagesBeforeAsyncPoint, Boolean, Boolean includeStagesAfterAsyncPoint) 1565

  Version information: Microsoft .NET Framework Version: 2.0.50727.4234; ASP.NET Version: 2.0.50727.4223

  Any ideas?

  Hello

  I suggest you for this post in the appropriate section of the form of MSDN

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k

• HP LaserJet Pro P1606dn: How to set up a static ip on the HP LaserJet Pro P1606dn

  How to set static IP on the printer.

  Unfortunatle I can't access the web page of the printer with DHCP.

  Are there any options to achieve this without page EWS?

  I can open the EWS page if I connect the printer via USB to give it a static IP address?

  Welcome @munish259272,

  Thanks to their participation in Forums of HP! I see by your post that you want to configure a static IP address for the printer. I can help you.

  You will need to access the server the printer embedded Web via IP address of the network printer.

  I have provided a document to configure the static IP address, go to Solution 4: assign your printer an IP under Windows: does not maintain connection printer wireless. Do not take into account the title.
  
  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Wireless connection fails on G10 after changing the motherboard

  I had a few problems with my wireless for quite awhile. Basically, whenever I turn on my pc my internet connection fails. I always do an RSP on my wireless connection. Finally, it works. This problem started when a technician has changed my motherboard to another question. Since then, it has changed my wireless card. The problem remains tho. Is there a patch for this?

  Hello

  Is your wireless network, Intel 2200BG If yes try to download the software for this www.intel.com. It is if you have a connection. Another thing to try is to go to the properties of the wireless card and make sure that the power supply is set to high and the output amplifier is set to enabled.

  It could be a mix up with the router by which DHCP not allocate an IP address that is inappropriate. You can go into the router through the admin option and disable this feature. However, you will need to return the laptop an IP address. Click on network connections and click with the right button on the wireless connection properties. You should see the list Internet TCP/Ip Protocol. Double click and assign the IP address manually. You must also enter the other info that can by typing ipconfig in the folder c: / prompt.

  HTH
  Norskman

• Summary of functions (two entries) for classes of brother with a dynamic distribution of entry: the static entry retains the type of the parent class.

  Suppose that in a hypothetical example, I have a superclass (number) with two children (real and complex) classes.

  I would define a function of sum for these classes, using dynamic distribution.

  Real or complex would have its own method of the sum (VI) which would be subject to various operations, such as the real and complex numbers are different.

  As I understand it, the normal way to proceed in OOP is for each of these methods to have an entry of dynamic distribution and a static entry of its own type.

  Problem: Labview doesn't let me do this!

  I first define an input method dynamic-shipping dummy for the numberof the parent class, but only the first entry can be dynamic-Envoy while the other is statically typed as number.

  Then, when I create override methods in my two children classes real and complex, the second entry (static) remains under the number (the type of the parent class). This is not fair, because then I can't access the private data of the child class of type real or complex that will be connected to the second input (static).

  What is the solution to this problem (usually)?

  I think that, in LVOOP, you use only a dynamic terminal or a static terminal to the terminal object.

  You can have several other terminals, but all the dynamics VI (methods with the same name) must have the same API (terminals).

  If you have to understand your preferred mode to pass, use multiple terminals, not used by each method, or use a cluster that contains all the numbers to pass (real or complex, both of which are not used in each method) or you can try a Variant, as shown.

• Audio event system has detected a device connection event audio location description of the Panel right-Black Jack

  I have no sound on my Dell inspiron 6400. Volume is not muted, sigmatel peripheral is enabled, hardware (speakers laptope) work, drivers have been updated and reinstalled.  Windows xp service pack 3.  The problem occurred after that children were playing a game of Dora on CD.  Above the popup of the event (System event Audio Audio System has detected a device connection event audio description location of the right panel Black Jack) appears.  Can get sound by using an external speaker.

  I note a number of comments suimilar on other sites but no resolution on these offers from

  If you go into Device Manager, you see a yellow fringe (!), which reports an error?

  To access the Device Manager in Windows XP:

   

  1. Click Start and then click Control Panel.

  2. Click the performance and Maintenance link.

     Note: If you see the Classic view of Control Panel, you will not see this link. Simple, double-click on the System icon and go to step 4.

  3. In the performance and Maintenance window, click the icon at the bottom of the window .

  4. In the System Properties window, click the hardware tab.

  5. The hardware tab selected, click the Device Manager button.

  Double-click sounds and game controllers.
  This will bring up a dialog box. From there you can update drivers, see the details of driver and driver rollback.

  If you uninstall CD Dora, you are able to get her back? It may be a conflict with the 3rd party product.

  Please let us know.

• I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  original title: alternate tcp/ip

  If by "alternate TCP/IP configuration" you mean the settings on this screen--> http://tinyurl.com/42kbqqz, then, to quote Inigo Montoya, "you keep using that Word. I don't think it means what you think it means. »

  The 'alternative' configuration settings tab, if you select "IP address private auto" (APIPA) or "specified user" is only used IF "obtain an IP address automatically" is set on the tab 'General' (http://tinyurl.com/8p9hn) AND the adapter cannot get an IP from a DHCP server.

  Most cable networks use a DHCP server to automatically assign IP addresses.  In this case, just plug your Ethernet cable and you're automatically configured and connected.

  If the problem is that your network requires a static IP address (that is, they use a DHCP server to automatically assign IP addresses), you will need a third-party network settings manager.  If you have an IBM (Lenovo) ThinkPad, you can use "Dial-up connections." IBM Otherwise, see this Google search (I have no experience with any of the applications shown, so I can't comment about them): http://www.google.com/#sclient=psy&hl=en&source=hp&q=network+configuration+switcher&pbx=1&oq=network+configuration+switcher&aq=f&aqi=g-v5&aql=&gs_sm=e&gs_upl=23l1333l1l1599l12l8l0l0l0l5l278l1344l0.7.1l8l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649

• Cisco E1000 does not connect to internet-do not get the Comcast modem DHCP ip address

  Very strange problem...

  I have Comcast HSI and use my E1000 Cisco (Linksys) for about 3 years now. Bought as a refurb.

  My problem is that the E1000 is NOT receiving DHCP of my modem Comast info.

  Internet works when my laptop is fixed directly to the modem; but when he connects to the internet port of the modem

  to the internet port of E1000 is NOT attract my IP from DHCP ISP so no client can broswe 'wired or wireless.

  I've even updated the firmware and starting to think its time to get a router 'NINE', as it is NOT LOGIC!

  I can't release/renew as I have NO ip address for free.  I tried to configure the E1000 as static

  using the ipconfig/all for when the laptop computer and the modem is connected. Comcast said they don't see anything on their end.

  I also have factory default router and Redid the config without result.

  Any help would be appreciated.

  You must activate the clone MAC address of the router to recognize the connection to your cable modem. The link below will tell you how to configure the router to work with a connection cable and how to clone MAC address.

  Setting up a Linksys router with cable Internet service

• Unable to connect to a network or to the Internet on my Dell XPS1530.

  Unable to connect to a network or to the Internet on my Dell XPS1530. When I try to diagnose problem, I get a message that reads "Network Diagnostics cannot run because the Diagnostics Policy Service is not running." Having exhausted the patience all the phone with my IP and Dell, which tells me that it is a problem of Microsoft software. I have two other computers and a PS3, and I am able to connect to the Internet through one any of them. The XPS works under Vista with SP2. Can someone help, please? Thank you.

  Go to start / Control Panel / Administrative Tools / Services and go to diagnostic policy Service and set it to automatic and start it.  If it does not start, check the dependencies and make sure they're too automatic and rnning.  Then see if you can run Network Diagnostics.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those developed to date for the network card and regardless of the device you use to connect (such as a router wireless or such) and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  When I'm in a lke your situation, I usually start from scratch.  Create a new network connection by ensuring that all settings are correct.  Check all the cables (if there is).  You have already reinstalled the drivers - make sure that no firmware or software is also necessary.  Configure the network sharing settings and make sure that you are ready to discover the network and such.  Check other computers to see their settings to make sure you get yours right and essentially the same thing (the same exatly so is another Vista machine connected in the same way).  Go to start / Control Panel / Internet settings and make sure that it's too fixed properly.  To connect, then try again. If this is not the case, remove some time to cool down and then start again with another new connection.  It's almost certainly a parameter that is not correcct (something no doubt very simple).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• If my desktop pc is connected through CATV cable, I use the wireless connection?

  We have a router that connects two laptop computers, a smart phone and smart TV, a Kindle reader and a printer.

  I want to know is so that desktop shows a "wireless network connection", I actually use this connection if this computer is connected through a CATV cable? Specifically, if I disconnect in that regard, maybe would I win any speed for this computer or laptop computers that are located in different parts of the House?

  And if so, how can I fix it so that it does not automatically each time connect that I boot?

  Thanks for your advice.

  It seems to me that you have a wireless router with many connected devices, including a desktop PC, and you want to know if forcing the PC being used a wired connection to the router, instead of a wireless connection, will increase speed or ease of use for one of your devices?

  Short answer, probably yes, and it should not hurt anything.

  Wireless network connections are all just more finicky than the wired connections. Without knowing the details of your router, I can't do any insurance policy, but reducing the pressure on your wireless radio components and its replacement by the PC with a wireless connection wired should not hurt anything and could help.

  I guess CATV here means a type of wired network cable CAT-5 cable? If it's just a "CAT 5" cable, he'll only go 100 Mbps, which might be slower than your wireless router. However, 100 Mbps is probably faster than your internet connection at home (your speed of the router to the outside world), so it should be good. If it's a "CAT-5e" cable, so no problem.

  To disable your wireless connection on the PC, go to control panel-> Device Manager command. You will get a window with a list of all the hardware devices on your computer, listed by category. A category must be "Network adapters" or something similar. Expand this category by clicking on it and find your wireless card (something something Wifi or wireless network card). Right-click, and then click on disable. Now your computer will be able to connect with the wired connection. When you want to cancel the process, simply repeat these steps and you will find that 'Disable' has been replaced with the option 'enable '.

• 2 static NAT on the same Interface

  I have an ASA 5510 (8.2 (5)) and I'm trying to set up a VPN site-to site of one of our suppliers.  The problem I am running into is that they want me NAT one specific to one of our servers private IP, and this server already has a static NAT from the outside of a demilitarized zone.  It's the current rule NAT:

  static (DMZ1, external) 65.43.x.x 10.0.0.3 netmask 255.255.255.255

  and they want card me 172.28.9.42 on the same server, so I tried to add:

  (DMZ1, external) 172.28.9.42 static 10.0.0.3 netmask 255.255.255.255

  but can not because it's a double translation.

  Any help would be greatly appreciated.

  Hello

  It seems to me you must configure a static NAT to politics

  Configurations would be as follows

  DMZ-POLICY-NAT of ip 10.0.0.3 host allowed access list

  (DMZ1, external) 172.28.9.42 static access-list DMZ-POLICY-NAT

  Regarding configurations

  • Name of the ACL can be naturally you want
  • Destination network can be a single host if necessary IP address
  • You should be able to configure multiple lines if necessary

  Note that you need to have this NAT configuration before the real public IP address command static NAT. You need to remove the existing static NAT to configure the above and add the original.

  This is because if you do not configure static NAT of politics first in the configuration, all traffic will keep hitting the normal rule of the static NAT for the public IP address.

  -Jouni

• Next hop for the static route on the VPN site to site ASA?

  Hi all

  I would be grateful if someone could help me with my problem ASA/misunderstanding. I have a VPN site-to site on a SAA. I want to add a floating static route to point to the VPN on the ASA. Note that the traffic in this way is not with in subnets cryptographic ACL that is used to bring up the VPN. This VPN is used only as a backup.

  The static route with the next hop add local public address or the remote public address of the VPN? The next break maybe local ASA isp internet facing interface? I intend to do on the ASDM. I'm sorry if it's a simple question but I found no material that explains this?

  Concerning

  Ahh, ok, makes sense.

  The next hop should be the next jump to the interface that ends the VPN connection, essentially the same as your Internet connection / outside the next hop interface.

  Example of topology:

  Site B (outside interface - 1.1.1.1) - (next hop: 1.1.1.2) Internet

  The static route must tell:

  outdoor 10.2.2.2 255.255.255.255 1.1.1.2 200

  I hope this helps.

• Connection to the guest operating system

  Hello! I've been test connectivity of a guest OS on a machine of ESXi. The problem is that I cannot ping successfully invited an operating system from another computer on the same network. The guest operating system is able to reach the other IP address on the network (via ping), but not the reverse. The guest operating system is Windows XP, and the local IP addresses are defined in static.

  Is there a way around the problem?

  Check your firewall on the XP guest windows.  Disable it, see if that helps.

• Static record with the default port no

  Is not is it possible to have static recording of data base with a listener running on a port no by default.
  If so, how? How to start a static listener for the database running

  If you use static registration then you have no need to use the LOCAL_LISTENER parameter is required for dynamic registration.

  Example with Oracle XE:

  Listener.ora:

  LISTENER1=
  (DESCRIPTION =
    (ADDRESS_LIST=
       (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
    )
  )
  
  SID_LIST_LISTENER1=
  (SID_LIST=
   (SID_DESC=
    (SID_NAME=XE)
    (ORACLE_HOME=C:\oraclexe\app\oracle\product\11.2.0\server)
   )
  )
  

  tnsnames.ora

  
  XE2 =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = XE)
      )
    )
  

  and:

  C:\>lsnrctl start listener1
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-OCT. -2011 12:07:05
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  Starting tnslsnr: please wait...
  
  TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
  System parameter file is C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
  Log messages written to C:\oraclexe\app\oracle\diag\tnslsnr\xxx\listener1\alert\log.xml
  Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
  STATUS of the LISTENER
  ------------------------
  Alias                     listener1
  Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
  Start Date                13-OCT. -2011 12:07:09
  Uptime                    0 days 0 hr. 0 min. 3 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
  Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\xxx\listener1\alert\log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
  Services Summary...
  Service "XE" has 1 instance(s).
    Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
  The command completed successfully
  
  C:\>tnsping XE2
  
  TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-OCT. -2011 12:07:18
  
  Copyright (c) 1997, 2010, Oracle.  All rights reserved.
  
  Used parameter files:
  C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED
  ) (SERVICE_NAME = XE)))
  OK (30 msec)
  
  C:\>sqlplus system/xxx@XE2
  
  SQL*Plus: Release 11.2.0.2.0 Production on Jeu. Oct. 13 12:07:27 2011
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
  
  SQL> show parameter local_li
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  local_listener                       string
  SQL> exit
  Disconnected from Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production