Connect Ipod Touch to Windows 7 using bluetooth

Similar Questions

• Error: "device driver will not install" when you connect Ipod touch to my computer

  Original title: Ipod touch

  HI, my Ipod touch is not recognized by my laptop. He says that it not install the 'device driver '.  Any thoughts on how to address this... much appreciated.

  Hi matthewherron,
   
  -What version of the operating system are you using?
  -Other USB devices recognized without any problems?
   
   
  If it is Windows XP that you are using, run the fix tool provided in the link given below and check if it contributes to the issue of fixing.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

• How can I sync iPod touch with Windows Media Player?

  original title: implement synchronization

  How can I get windows media player to set up sync, synchronization and connection to an ipod touch?

  In General, you can not. Make your choice of Google: (or ask in the forums applies)

  http://www.Google.com/search?q=Windows+Media+Player+sync+to+iPod&ie=UTF-8

• Sync IPod touch with Windows Media Center

  Hello

  I was wonder if there is a way for the Windows Media Player to sync with my iPod touch and also if possible how do I change the type of extension file synchronization?
  My current problem is that the iPod does not appear on the list of devices. As an employer in a business that uses music to support our workers during the construction outside, we cannot install program unless we get they technicians to tell us if the program is allowed to install. Technicians have said we can not install ITunes but currently has Windows Media Center on it. I hope there is a solution to this problem. I'm looking for a program/preference free but so essential function can pay up to 10 New Zealand dollars.
  In theory no. In practice, Yes.

  Go here: http://www.mgtek.com/dopisp/

  Its an add-on to synchronize i-products with WMP.
  However check your operating system, it won't work with OS 5 or 6.
  There are other products out there, just Google.
  See you soon,.
  Jerry

• After update to version 34.0.5 I can not connect to Storage on windows XP using Firefox or 8. It gives a message cookies are blocked. What should do?

  After Firefox updated Dec. 9, I can't connect you to MyYahoo or Yahoo mail using Windows 8 or XP sp3. When I try to log in it States cookies are rejected. I followed all the directions for removal and confirmed the parameters. Œuvres MSIE. I tried to remove anti-ad and filter Firefox Add-ons because Firefox has started to freeze. I have fixed the freezing point, but still cannot connect to Yahoo. I added Yahoo lists of exceptions, but it did not help.

  Hello speedy65, please try to reset firefox and see if that can solve the problem...

• Microsoft Broadband Networking Wireless Base Station MN-700 and try to connect IPod touch

  Request password and when I enter the password I thought that it is wrong, but when I connect the web site management tool is the password. Please help me to connect my ipod to my wireless network.

  Hello Peggygaw,

  Thanks for visiting the site of the community of Microsoft Windows XP.  You should visit the Apple website to get help for connecting your iPod to a wireless network.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• want to connect to internet with my gfive, using bluetooth

  My OS windows XP SP 2

  Hello

  Maybe this can help.

  http://forums.techarena.in/portable-devices/1291519.htm

• I can't the music playing in my car when I have iPod touch connected via Bluetooth. I get message says: CONNECT to THE WI FI TO PLAY music. Why not play via Bluetooth only?

  Hello..

  I'm playing my iPod touch in my car through Bluetooth. The audio system in my car recognizes the iPod via Bluetooth. but, I can't seem to play the music. I get a message on the iPod that reads to CONNECT to WI - FI TO PLAY MUSIC. There is of course no WIFI signal in my car, just Bluetooth. Why can't the iPod to play through my audio system via the Bluetooth connection? Why he keep insisting that I need to connect to the wi FI? How to play via a Bluetooth connection? The Bluetooth is in the car & on the iPod. It is synchronized to the top.

  Thank you in advance for help.

  Hi, Mishkapatches.

  Please visit Apple support communities.

  It sounds like you may be a subscriber of Apple music and media has not been made available to listen to offline.  I suggest you take a look at the article below.  This will guide you through the process of downloading music music Apple directly on the device so that you can listen to music when not connected to the internet.

  Add music catalog to Apple's music to your library on your iPhone, iPad, iPod touch, Mac or PC

  See you soon

• Is it possible to use an application designed for iPhone/iPad on my iMac or (older) instead of the iPod touch?

  Sorry, I don't have an iPhone and I'm not a user app.  But I found one that I really want to get.  The description says that it is designed for an iPhone or an iPad.  Can I download it on my iMac and use iTunes to put on my older iPod touch?  Or just use it on my iMac?  Here is the app in question.  Thank you!

  iTunes does not sell at apps for your computer.  All applications are for iPhone/ipad/ipod.

  You will need to check the requirements for the application know what version of iOS is required if you want to use on your iPod.

• How can I display the table of contents for the iPod Touch to 6

  When I opened first of all iPod Touch Users' Guide, I used the table of contents (TOC) to locate and access sections in the manual. But, after looking through the manual for awhile, I tried to return to the table of contents, but it wasn't there! I have tried various things to see if the table of contents are being hidden, or if in some way, it has been deleted. Anyone can shed light on this mysterious event?

  What is the version of iBooks that you speak? There is an online version here: https://help.apple.com/ipod-touch/9/ Aha, I see the table of contents on the left disappears if you zoom before or make the narrow window and reappears if zoom you out or make it larger.

  TT2

• New iPod touch without ilife applications.

  Hi, I bought a gen 6 new sealed iPod Touch on ebay ever used. Today, I opened to the touch and there iOS 9.0.1, I wanted to date, but not for iOS 10 because apple got rid of slide it to unlock. so I registered in the device with my apple ID 9.0.1 Open GarageBand and a few other iLife on the device to check. Then, I used itunes and put the 9.3.5 ipsw image for restore the ipod to do this any of the ilife applications were there, so I went to the app store and assumed that they would be linked to my account and I could download them, nope, they wanted to buy them from me. I went on the chat of apples and bounced to another representative, I spent 1 hour literally on the cat and they were never able to tell me if they could add apps to my apple ID. I am out of luck here or can someone help me because I thought that ilife apps etc. garage band notes came with a new device from apple for free.

  They are listed in the section of the App Store app purchase? Otherwise it seems that the iPdi is used with another code.

  If you enter the serial number here when does show that your warranty expires?

  https://checkcoverage.Apple.com/

  If this isn't a year from when your device configuration which means that it once was.

• iPod touch 4g can not find wifi 802.11n

  If I put my 723v Speedport router to 802. 11A / n wifi only, my ipod touch 4 g can't find the network.

  (Worked well for the ipod when the router is configured for 802.11b/g/n, but has been annoyingly slow on my Macbook Air of 2012 then)

  I understand that the ipod touch 4g supports the standard right, wifi-n? So why he can not find the router when the value of a/d only?

  801.11n can be used on the band of 2.4 GHz and 5 GHz band, but 11n is not necessary to support the two bands simultaneously.

  Setting your router to 802. 11A / n (apparently) means, use only 5 GHz band with support from 11A and 11n.

  (11A uses 5 GHz only)

  However, iPod touch 4G can only use 11 b/g/n on the 2.4 GHz band. He can't see 5 GHz Wi - Fi signal.

  (11b and 11g use 2.4 GHz only)

• iPod touch 4th generation does not not with xcarlink

  Can anyone help. I have recently purchased an iPod touch 4th generation for use with the xcarlink iPod interface. I can't seem to make it work either comes up with is not compatible for loading! Can I get nt music broadcast through your car stereo speakers, but an older iPod worked fine and my iPod 2. Y at - it something I am doing wrong? Y at - it connectors adapter that I can buy to fix this very annoying? Can anyone help?

  Sometimes it works:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  less than ten seconds, until the Apple logo appears

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  However, xcarlink is old and not infrequently an iOS update/new model iPod case compatibility.     All I can find on the site of xcarlink is:

  (6) support iPod 3, iPod 4, Nano, Nano 3, video, Mini, Classic, Touch, iPhone

• PC crashes when I plug in my ipod touch.

  My PC works fine until I have attach my ipod touch. The PC freezes and I can't do anything. I tried the troubleshooting, and he said that I had a missing driver. It worked fine until about an hour ago. As long as I do not connect ipod touch to the computer I have no problems and everything works fine. Does anyone have advice?

  Hello

  Have you tried resolution of hardware problems and devices?

  Method 1:

  Turn off by pressing the menu button on your iPod touch. Once your iPod goes out, plug the Ipod on the computer tower it back to see if the gel problem has been resolved.

  Method 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps: click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  1. click on the hardware tab.

  2. click on the Device Manager button.

  3. expand Bus USB controllers.

  4 right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  5 restart the computer and reinstall the USB controllers.

  6. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Reference:

  http://support.Microsoft.com/kb/2516416

• Setup error: could not connect to X 11 window server...

  Hi all
  
  I need help to get rid of the errors. I am trying to install Oracle 11 g 1 material on Red Hat Enterprose Lunux 5 installed as guest on my Oracle VM Virtual Box operating system
  
  SEE [data oracle@lnxsadock-pc] $ = lnxsadock - pc:0.0
  [data oracle@lnxsadock-pc] $ echo $DISPLAY
  lnxsadock - pc:0.0
  [data oracle@lnxsadock-pc] $
  [data oracle@lnxsadock-pc] $. / runInstaller - ignoreSysPrereqs
  From Oracle Universal Installer...
  
  Check the Temp space: must be greater than 80 MB. Real 25977 MB passed
  Check the swap space: must be greater than 150 MB. Real 3071 MB passed
  Monitor: must be configured to display at least 256 colors
  > > > Could not execute auto check for display colors using command/usr/bin/xdpyinfo(1). Check if the DISPLAY variable is set. Failure of < < < <
  

  Prerequisite required Ignoring failures. Persistence of...

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2011-09-12_11-34-52 AM. Please wait... [data oracle@lnxsadock-pc] $ Oracle Universal Installer, Version 11.1.0.6.0 Production
  Copyright (C) 1999, 2007, Oracle. All rights reserved.
  
  Unable to connect to X 11 window server using ' lnxsadock - pc:0.0' as the value of the DISPLAY variable.
  lnxsadock - pc:0.0
  lnxsadock - pc:0.0
  YES-10025: could not start an interactive install session due to the following error: unable to connect to X 11 window server using ' lnxsadock - pc:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable must be on < host name or IP address >: < form >, where the <>screen is generally "0,0".
  YES-10026: according to the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
  -For csh: % setenv DISPLAY 192.168.1.128:0.0
  -For sh, ksh and bash: DISPLAY $ = 192.168.1.128:0.0; Export DISPLAY
  Use the following command to see what shell is used:
  echo $SHELL
  Use the following command to display the current setting of the DISPLAY environment variable:
  echo $DISPLAY
  S ' ensure that client users are allowed to connect to the X server.
  YES-10027: to allow users to access the client X server, open an xterm, dtterm or an xconsole as the user that started the session and type the command follows:
  % xhost +.
  To test that the DISPLAY environment variable is set up correctly, run only an X 11 program provided with the native operating system as 'xclock ':
  % < full path for xclock... see below >
  If you are not able to run xclock successfully, please consult your PC - X Server or the operating system provider for assistance.
  Standard path for 'xclock': ' / usr/X11R6/bin/xclock.

  My apologies, I did not read in your 1st post.

  Maybe it's because you haven't shared enough memory in the DISPLAY section. Try to 32 MB and activate 3D acceleration.

  Let me know if it helps.