Connect many clips with the same information for a particular column

Similar Questions

• How can I replace the same clips with the same interval of time (same settings)?

  Dear Adobe Premiere CS5 Forum,

  I have the following problem, and I would look forward to receiving solutions:

  As I couldn't cut my video with clips in avi codecs (it is very difficult to cut in avi codecs, except that you have a very fast computer), I converted my raw clips in lower codecs. Then I cut my video in low quality codecs. My video is now ready to export.

  But before I want to export my video, I need to replace all the clips in avi codes so that my video is in good quality.

  Now the problem:

  How can I replace the clips (poor quality video codec codec avi), in order to have the same clips in a different codec always the same interval of time. I want the replaced clip immediately have the same interval of time.

  For example: a raw whole clip takes 2 minutes. But just a part / interval of the clip (from 01:00 minute 01:10 minutes) is shown in the video. Now I want to replace this clip with the same clip in avi codec. But it must be the same interval (from 01:00 minute 01:10 minutes).

  I tried to replace a clip. But they each have a different time interval (the lower quality clip is from 01:00 to 01:10 minutes and if I would like to replace the same clip in avi codec is the time interval between 0:00 to 0:10 minutes).

  How can I replace the clip with the same interval of time?

  Thanks in advance

  Leonardo

  Hold down the Alt + Shift; It is Shift that maintains the reference timecode. In addition, this will work only if your proxy clips contains timecode. If they all start to 00:00:00:00, this will not work for you.

• All the fields are filled automatically with the same information as in the field.  When deleting, all delte also fields.

  Whenever I type information in the first field of the form, it automatically fills the same information in all areas.  How can I stop this

  If you don't have Adobe Acrobat Reader for free, you can not.

  It was more than likely a mistake by the creator of forms. No doubt, they have created a field copy and paste this one to create others. Usually, it's ok, but must be given to all fields different identifiers (names). All the fields with the same name will be filled with the same content.

• Adobe download links show the same information for the two 3.6 Lightroom and Lightroom 4.4.1 (Windows). Must be false.

  I want to download Lightroom 4.4.1 to my computer with Windows 8.1. When I try to find the correct link in the list of download from Adobe, I get exactly the same Info for Lightroom 3.6 and 4.4.1. A new page for the 4.4.1 version should be mentioned.

  You can get all the versions here.

  Adobe - Lightroom: For Windows

• How to disable BlackBerry Smartphones called Missed Call function with the same information?

  I would like to disable the who call or missed call option in my log files because they report the same information. Can anyone help?

  Thank you.

  Remi

  Rémi, press the Green dial button to open your call log > Menu > Options > call Loggin and check NO or any other option you want. RECORD.

• FSX MULTIPLAYER DOES NOT HAVE MANY PEOPLE WITH THE SAME PROBLEM

  I have a FSX I've always used the multiplayer mode for online flight, now a few weeks ago its been not conect, my internet is good, everything works but is not multiplayer, many people with this problem, tell us how to find a solution, we really like this multiplayer game

  Hello

  Thanks for posting your query in Microsoft Communities.

  According to the description of the problem, it seems that you are not able to play Flight Simulator X multiplayer.

  Please go ahead and read the steps mentioned from the link and later a update on the State of the question.

  Microsoft Games: Multiplayer troubleshoot

  You can also stay in contact with the Flight Simulator with the help of the link and check if it helps.

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  I hope this helps. Let us know if you need more assistance.

• I just bought an IPhone 6 Plus. When I get a text Message I get no advice or vibrations. I have all the settings correct. I know many others with the same problem with this phone. Any suggestions?

  I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?

  I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.

• Windows 7 is not mapped to a network drive with the same information that works with Vista

  I'm trying to map a network drive that connects via a VPN.

  The exact information and references work very well on an old Vista machine but do not work on my Win 7 Professional machine.
  Thanks in advance.
  Ray

  Hello

  I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  They will be able to guide you to the best.

• With one of several rows with the same value for the same ID

  Hello

  I have this request:

  SELECT

  Count (case when EXISTS ())

  SELECT *.

  FROM business_log bl, su topic

  WHERE su.ID_SUBJECT = s.ID_SUBJECT

  and bl.id_subject = su.id_subject

  AND bl.value = 'resolved '.

  )

  then 1 end another null) num_solved

  OF THE subject

  It is possible that a subject is more than once 'resolved' in the table BUSINESS_LOG

  I want to count only one line solved for a topic.

  I need to use only under RESERVE the table in the main query due to other counts.

  Thank you very much.

  Concerning

  Milos

  Post edited by: 2796614

  in the examples before we talked abount 'Resolved' instead of 'resolved' as in your last example... to let you know, how it is stored.

  I had advice is not to use SEPARATE.

  So what... the evidence that any other question is faster than anything goes business_log, filter lines and can count distinct keys...

  separate within a group function is not the same thing as do select distinct...

  HTH

• OWB, I need to update the target table with the same field for game/update

  OWb, I try to update the target table with the game and the update on the same ground is this possible. I'm a match merge error indicating that you cannot update and match on the same ground. But in SQl is my selection
  
  Update table
  define RFID = 0
  where RFID = 1
  and ID_processus = 'TEST '.
  
  Can HWO I do this in OWB.

  I have check but in the case later (last one) that he warns no error if you can go with it.
  and I tested it it works

  You can check the first case (from where we start) if it has been warned and then try to run.

• Many clips of the same clip initial adjustment

  Hi all

  When I send my project to create hearing I have generally made several changes to a single long clip (interview/news etc.). When I make the project in hearing the audio is rendered out as individual items.

  It seems a bit odd to have to apply, compression, etc. for each individual audio segment when I could just apply once the single long clip of standardization.

  I understand that I can apply effects to the level of the tracks in multitrack view, but I can't apply normalization and the waveform is not updated.

  Would you do a first pass of the audio track as a whole before editing it first?

  Is there a standard workflow for this sort of thing? Am I stupid?
  

  Thanks for any advice, much appreciated!

  If a change of level overall, standardization or EQ is required then it is a good idea to apply it to the entire audio file before editing. However don't forget to work on a copy of the original file in case you should return to the original. You can then concentrate on the application of other adjustments to individual clips when you changed the worms down thereafter.

• How to connect several swf in the same application for iOS

  Hello

  I have a problem.

  I have lot of swf files, each of them is related to another: I have a menu with botton page linked to the different games (a swf for the game).

  Now, I need to convert this into an iPad app.

  My question is: which is the best way to create a link between all my swf files?

  I read a lot of things, but I really don't understand how I can move.

  Thx for the help,

  Stefano

  Add them to your files included in the iOS settings panel and use the sdk air 3.6 + and use the current application domain http://blogs.adobe.com/airodynamics/2012/11/09/packaging-and-loading-multiple-swfs-in-air-apps-sur-ios /

• Only insert table row with duplicates with the same information line

  Hello

  I have the following tables:

  (Registration) CREATE TABLE

  name varchar (10) NOT NULL,

  country of varchar (10) NOT NULL,

  Date of varchar (10) NOT NULL,

  [....]

  );

  and the second

  CREATE TABLE names

  name varchar (10) NOT NULL,

  country of varchar (10) NOT NULL,

  Date of varchar (10) NOT NULL,

  CONSTRAINT PK_names PRIMARY KEY (name, country);

  I'm trying to insert in the last lines of the table in the first table (REGISTRATION), but there is an error: "constraint unique (s.%s) violated.

  The insertion code I used is:

  INSERT INTO name (name, country, date)

  SELECT DISTINCT name, country, max (date) registration;

  The table ENTRIES have similar duplicate records as (I write only the corresponding columns of the table)

  NAME                         country                                        DATE

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  CSA.                             Fiji 1954-09-17

  ASC                              Fiji                                          1967-06-23

  I want to only insert names the first registry because it is the first date on the two registers.

  Thank you very much.

  Hello

  SELECT DISTINCT nombre_club, pais_club, max (fecha_fund_club) of INSCRIPTIONS;

  will give you the error

  ORA-00937: not a single group group function

  So I don't see how you can run the insert statement and get the unique constraint error

  I think that's what you wanted? Which should solve the unique constraint as the ORA-00937:

  INSERT IN TOWN (nombre_club, pais, ano_fundacion)

  SELECT nombre_club, pais_club, max (fecha_fund_club) of the Group of the INSCRIPTIONS of nombre_club and pais_club;

  Kind regards

  Thierry

• 3070 connectivity problem - multiple Accespoints with the same SSID

  Hi all

  I have a problem with my printer HP Deskjet 3070 printer all-in-one.

  I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.

  For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.

  I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.

  I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)

  When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)

  If I take one of the accespoints offline, the printer becomes available.

  Is this a problem on my end or a problem of software/firmware printer?

  Kind regards

  -eth0

  Lol this is not very clear to me?

  But it is very good that we continue here:

  http://h30499.www3.HP.com/T5/printers-DeskJet/3070A-connectivity-issue-multiple-Accespoints-with-the-same-SSID/TD-p/5865699#.UKNyiYatlI1

• How can I download the new update on my Macbook pro when the password is not working? When I connect to the Adobe site with the same user name and password it DOES not work. I don't understand why.

  So I have a macbook pro - and she advised me that I had to update my Adobe flash player. So I go through all the steps and I'm stuck at the last stage, where he asks me my user name and password. I go in there correctly - several times and it does NOT connect. He shakes to show that there's an error. Double check my file AND I go to the Adobe site to connect with the same information. and it works very well.

  WHAT IS THE PROBLEM? Help please.

  Could you please try ComputerName administrator as username and the password as password.

  I hope this works.

  Concerning

  Hervé Khare