Connect NMH410 directly to PC via USB

Similar Questions

• I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this program and I know

  I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this progra

  It is a product obsolette, the server can activate it no more.

  You can use CS2 error: "Activation Server unavailable". CS2, Acrobat 7, Audition 3 downloads & serial number are given.

  Concerning

  Stéphane

• The airport will connect to the brother 2270DW via USB but not ethernet

  Apple replaced my Airport Extreme after only 9 months and it has been quite a challenge to get back to square one.

  On the older airport, I connected to my printer wireless Brother via an Ethernet port on the router, but now it does not detect the printer. I changed the cables without result. I have finally connected via USB to the airport and wireless printing is restored, but why didn't he see my ethernet port.  The port works because I am connected via a cable to my laptop and it lights up. I have a problem with the port or printer?

  He does not see my printer via ethernet. What gives?

  Thank you

  Alexander

  You have entered the system preferences in printers and Scanners and added to the printer?

• Connect XPS10 to the PC via USB

  Page 33 of the manual for the XPS 10 (http://www.dell.com/support/Manuals/us/en/19/Product/XPS-10-tablet) indicates that it is possible to connect the XPS10 to a PC via USB for easy transfer of files. However, when I connect the tablet to my laptop, a Dell E6320 running Win XP, the device is not visible to the laptop. Am I missing something?

  Hi robnhl,

  I received a reply from the engineering team. I'm sorry to inform you that the system works as expected. Data transfer using the USB cable is not supported. It is the only way to transfer data through Bluetooth. You can connect the external keyboard or a USB / DVD player into the USB port. The online manual is currently under review and should be updated soon with the correct information. Please accept my sincere apologies for the inconvenience caused.

• Import the camera directly into Lightroom via USB

  I looked around this forum but could not find an answer to what I thought was a simple question.

  Using the Mavericks 10.9.5 and Lightroom 5.6

  I am trying to improve my workflow.

  I currently take two steps to get my photos in Lightroom:

  
  

  1. connect the camera via USB for Mac and Nikon Transfer allows you to import photos from my camera in a default folder on my Mac, I also put it to remove photos from my camera once completed.

  2. open Lightroom and import photos to the catalog, including moving them to the desired specific final destination folder.

  I know I could use a card reader but don't want to go down that road because it's a pain out the mem card and its replacement.

  Is it possible to reduce this to a single step using Lightroom.

  I tried implementing of Image Capture on my Mac to make Lightroom automatically open when a camera is connected, but the option is grayed out, which seems strange.

  If I have lightroom open, and then select the camera as source only get the option copy files not move them to a folder of destination of the machine photo so can't erase the memory of the device.

  I can't be the only person who wants to do this someone has a solution.

  After playing around a bit I have answered my own question.

  I discovered that Nikon Transfer has an option to automatically open another application, so affecting that Lightroom, I realized what I wanted.

• XP hangs after connecting an external hard drive via USB port

  When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

  Well - it's Windows for you, sometimes. :/

  Good luck with your new installation!

• Photosmart 2610xi not connect to Airport Express Terminal via USB

  I recently bought a MacBook Pro and the Airport Express.  In the past my Photosmart 2610xi was connected to my Mac Mini with a connected Ethernet cable directly on my Linksys router.  I tried to connect my printer to the Airport express with a USB cord, and while my Airport Express is the printer can't seem to connect.  When I print something the document hangs in the queue with the words 'connection '.  Any help would be appreciated.  Thank you.

  Why are not you connect the printer to the airport with Ethernet?  It is the only way to get both printing and scanning.  USB will support printing only.

  Have you tried to delete and add the printer in the print queue:

  -Sys Prefs, Print & Fax
  -Select the printer in question and click the sign less down the list
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, do the same thing, only instead of the second stage, right (control), click the box of the print queue and select Reset Printing System.

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• OfficeJet 6500 E710n-z: where to locate X 86 Drivers for Win 7 to print Via USB system connected to the network using Win 8.1

  Since my computer can only connect to a printer wireless via USB, other computers on the network cannot connect to the printer.  The possibility of allowing other printers using the main system of sharing, I need the x 86 driver but cannot locate it on the HP support.

  Seems there are a lot of problems installing with HP systems, I would hope that society can give a high priority to these issues.  Many of us love quality HP but wireless connectivity is frustrating.

  In a humorous way, please remove the "cannot find the printer - make sure that the printer is plugged in and turned on."  statement.  Our children know how to set up a network, so that the statement is hilarious, until you see for the 20th time as possible motive to the wireless printer is not found on the network.

  Hello
  My post seemed to have grown to a case manager who was willing to put up a time for the members of technical support to contact me.  By the way, she asked about the distance, the printer from the router, which, by other reviewers, should be placed next to the printer, and she asked for me to try to move the router to about 18 inches from the printer so that it would be responsible for coordinating the call of support following our conversation.

  I did it and all network issues related to wireless access by the entire Office has been resolved and performing network and each station can print and scan in a few minutes, following a job application.  Printing took about 20 minutes to start and sweep was impossible until this Council been offered.

  Many congratulations to Yvonne!  And, I thank you for following up on this post.  I am a very satisfied customer again once my application has been met with personal concern for the issue and an appropriate resolution and FANTASTIC found!

  Thank you once again,

  Rick

• BlackBerry Smartphones phone hangs when connected via USB

  Hi I have a Pearl 8120. There is a problem where the phone will break if I connect it to some PC via USB.

  When I say that it blocks the screen turns off and the red light stays on. To recover from this point, I have to unplug and reinsert the battery.

  But for example if I connect it while the PC is not started in Windows so it will not crash.

  When I connect the phone via a charger cable is also very good, and never, it hangs on my own PC at home.

  Is there a way to fix this?

  Hi, it seems that too much effort for reload software blackberry at this stage.

  Although I solved the problem by changing the option "Auto enable mass Storage Mode when connected" guest.

• Portege R500: unable to connect the remote DVI monitor via Dynadock

  Hello

  I just connected Dynadock (DVI) with my Portege R500. The cell would be supported - according to Toshiba - but my experience confirms that Dynadock is not able to access the DVI ports. This implies, that Dynadock is nothing more than the USB HUB.

  My setup: Vista 32 company b (CZE edition), the latest patches, Toshiba R500.

  Software: latest dynadock software 2.3 c.

  Symptom: I can't connect to the remote DVI monitor via the dynadock, there are only two external panels with 800 x 600, but Vista does not allow me to choose.

  More information: software Dynadock requires to run without Microsoft Defender, otherwise it blocks the service: DisplayLinkService; file:C:\Program Files\DisplayLink base Software\DisplayLinkService.exe
  If you turn off the MSDef, the "error 2738" message appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
  Yes, I know the VBS question and the problem is not caused by VisualBasic - VBS "Hello World" runs.

  If you think always, Toshiba Dynadock is compatible with Toshiba R500, then press Fn + F5 and look at your logs and you should find something like:
  In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.

  I look forward to the comments, advice etc. If you are able to transmit this bug report to a responsible engineer, do please.

  Hello Leo

  As far as I know, Toshiba has not designed for laptops models own only Dynadock and it can be used on every laptop or fixed. Because of this, I think that this statement about model of care is not so important for this problem.

  Toshiba provides devices and software. To connect using the USB port, and these ports must each computer or laptop. I hope that you have installed the software by following the on-screen instructions (device of should not be connected to the start-up of the plant).

  Is your Portege docked the host or you have connected Dynadock directly in Portege s USB port?

• Attachment to Internet from PC via USB / reverse

  Hello

  How do I have the Xperia Z2 can use the Internet connection provided by a PC via USB cable? WiFi is not an option, you prefer not to install apps on the mobile, since everything that I found asking for rooting the device. It is very surprising that he is not in the default settings. It can be easily placed on other devices (e.g. HTC), and the regular socket (using the internet connection of the phone to the PC) can be set on the phone as well.

  In addition, I wonder why are the options settings on Xperia Z2 so limited? No manipulation for the USB, no proponent of setting, why?

  Thanks in advance for your answers.

  You have the options of developer, just go to settings-phone.tap several times about on the build number. With regard to the use of the connection through a cable, read here:

  http://talk.sonymobile.com/T5/Xperia-Z1-Z1s/how-to-get-Internet-from-desktop-to-phone/m-p/701285#M26...

• HP M9V10PA #ACJ: usb. Bluetooth not share internet connection, wifi direct does not

  M9V10PA #ACJ model number

  HP deskjet 5525 e printer all in one

  question: -.

  1.) can print via usb to the laptop window function 8.1, allows to print wireless from my smartphone Android based without direct WiFi router, connect to eprint, wireless with mobile router but can not print from my new hp laptop network is limited with! sign and the printer is not detected. (if printer problem, then it can not print from mobile and if problem laptop, he could not able to connect to internet I use.)

  2.) my computer laptop wifi direct support means can I Exchange offline like bluetooth and can my printer is my computer laptop wifi and I can connect from printer.

  3.) bluetooth teathering in andriod do not share internet on my laptop when I teather.

  4.) usb teathering does not share internet to andriod which is samsung galaxy mobile new j7 sharing internet via wifi.

  None of your support team is able to answer all these questions and not even want to listen to. All what they just time passes I try for 5 6 7 6 hours wasted days. they have just replied to the request is transferred to the technical service of master. If you have a mail solution please me [email protected]

  USB and bluetooth internet sharing in 8.1 window I had to update my driver in the Device Manager I have updated ndis network driver that was yellow highlighted in color and it was not installed in window 8.1. After installation two teathering worked well.

  For direct wifi in the printer I just on my direct wifi on my printer and network printer highlighted me in networks in form of PRINTING HP 41 Deskjet 5520 series with signs ! in wireless. ! sign simply means the network is limited and cannot share internet. So jusst linked to that as network limited and then used software to connect as wireless HP printer. It worked well, but have still the issue with speed on the network even my signal is full. Wifi printer on the direct network access speed is very very slow, I'm connected.how to improve the speed, I don't know.

  Another issue is that my laptop is same average direct wifi capabilities to communicate with other devices can I create my own hotspot by laptop same name network HP-PRINT 41 Deskjet 5520 series in printer not supposed to share internet, but at least for wireless data sharing.

• HP LaserJet MFP M425dw 400 pro: cannot connect to the printer via USB

  Hello

  My problem is as follows:

  Since December 2014, the HP printer has been connected via USB to the desktop (at the time using windows 8.1) and by the network to other computers. The problem is with the 10 windows desktop where it is widely used for double-sided scanning.

  Yesterday morning I came only to find out that HP will not work in no case with Office for Windows 10 USB - connected, changed the ports that are 6, the cables, the office will say it is not connected. However, it connects through network for printing but not scan, it gives an error about Scanner HP not connected but will scan with Windows Scanner and fax with the printer using the scanner for the work of network folder - which can not scan two-sided.

  I uninstalled the driver, reinstalled with HP Support Assistant / downloaded directly from HP, same thing. The problem is that it be increased to 99% on the screen that shows the connection to the printer (the one detecting the USB cable) when it will say:

  "

  Error

  A Setup operation took too long to run. It is a fatal error, preventing the use of the product.

  If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. »

  I tried the original shipped with the printer CD, it gives the same error message.

  If anyone can help I will be very grateful. Thank you!

  Too bad! Fixed it myself using the Hp Smart Install supplied with the network interface of the printer.

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?