Connect portable HDTV using VGA cable

Similar Questions

• Difficulties of laptop computer connection LG HDTV with VGA cable... Help please

  Hi, I'm looking to plug:

  Toshiba laptop - PSC08E-03M001EN http://www.toshiba.co.uk/discontinued-products/satellite-c650-1ct/
  (Windows 7-64 bit)

  LG HDTV - 42LS3400 link to TV-http://www.ebuyer.com/product/367615

  Cable is VGA to red, blue & green cable (don't know name sorry) image of cable here:: http://www.google.co.uk/imgres?um=1&safe=off&client=firefox-a&hs=Y2a&sa=N&rls=org.mozilla:en-GB:official&biw=1366&bih=627&hl=en&tbm=isch&tbnid=urskVAMn94lrQM:&imgrefurl=http://www.alibaba.com/product-gs/631055727/SVGA_VGA_to_Red_Green_Blue.html&docid=2pwndXSQ14pf8M&imgurl=http://i01.i.aliimg.com/img/pb/056/749/507/507749056_659.jpg&w=600&h=453&ei=wvihUbujHvCR0QXx5oH4DA&zoom=1&ved=1t:3588,r:23,s:0,i:162&iact=rc&dur=1185&page=2&tbnh=191&tbnw=253&start=17&ndsp=24&tx=158&ty=123.

  Connections are correct & safe, I have:
  Display settings - 1 | 2 shows multiple monitors, duplicate.
  RES - 1366 x 768, landscape of the screen, displays duplicate.  If I'm reading - 'another view undetected. "

  Graphics settings - Intel Graphics & Media Control Panel-display:
  General: Built-in-Display SEC5641, Res: 1366 x 768, color number: 32 bits, refresh rate: 60 Hz, Rotation: turn to normal, scale: scale full screen
  Several screens: Mode of operation: Clone screens, the main screen: built in display SEC5641, second screen: monitor
  Monitor/TV settings - not supported.

  Sorry about all this info, just want to provide as much as possible help to identify any problems.

  PROBLEM-

  My TV displays a picture of sorts however we jumpy/fragile & show three (vertical) versions of the same image on my TV.  Black & white, its sometimes a offline.

  I have the wires on connected TV where I got my Wired Xbox, the option on my TV to input is the component, when I turn on my laptop & the entry has the value component that I see the image on the screen & clearer, however, after logging in screen disappears & said that there is no signal.  The only way I can see anything either again is by ctrl, alt & del.

  If I switch to AV2 on the choice of appetizer menu on my TV, it shows the description of the jumpy/fragile image, ctrl alt del - although the picture improves slightly & is not fragile, its still very black & white & duplicated in three patrs.

  Any help would be appreciated?

  Thanks in advance

  Cameron

  Hey Cameron,

  I suggest you to change the display settings on the computer and check.

  Get the best display on your monitor

  Connect your computer to a TV

  You can also try to update the latest version of the drivers on the site Web of Toshiba display adapter and check.

  Please post back with the State of the question, so that we can help you further.

• Whenever I connect to my HDTV using vga, I get a BSOD, even tried with different pc tv/cable

  Hello

  Thank you for taking the time to read this! Yesterday that I tried to connect to an HDTV using VGA instead of someone else, worked well. Buy a vga cable today and connected to my 1080 p full hd Phillips and got a BSOD almost instantly. I tried some things and managed to do the work! Played skyrim for a little and left the laptop in sleep mode. Came, open upward and the screen stayed black, nothing I could do to get a Visual.
  Now, whenever I connect the cable I get a BSOD, it works with any other laptop, excludes the cable and television.
  I have updated all drivers in the list, checked my drive for errors using the good chkdsk, smart status on the disk is good, all withdrew. I know for a fact that my laptop works fine with extra monitors, we use all the time on my internship and as stated, it worked yesterday on another TV.
  Features of the laptop:

  ASUS n73jn

  processor Intel i5 460 m
  NVIDIA geforce 335 m
  Windows 7 64 bit
  4 GB ddr3 RAM
  the HDMI port is dysfunctional, just a few flickering screens filled with black lines, that's why I try vga. My guess is the hdmi port is DOA, but did not have a hd tv up to 2 years after purchase.
  
  News of the capture of blue screen:
  ==================================================

  Dump file: 093012-44382 - 01.dmp

  Crash time: 30/09/2012-18:57:22

  Bug Check String: SYSTEM_SERVICE_EXCEPTION

  Bug check code: 0x0000003b

  Parameter 1: 00000000' c0000005

  Parameter 2: fffff880'074259 cd

  Parameter 3: fffff880'029f90a0

  Parameter 4: 00000000'00000000

  Caused by the driver: igdkmd64.sys

  Caused by the address: igdkmd64.sys + 1e29cd

  Description of the file:

  Product name:

  Company:

  Version of the file:

  CPU: x 64

  Plant address: ntoskrnl.exe + 7f1c0

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\093012-44382-01.dmp

  Number of processors: 4

  Main version: 15

  Minor Version: 7601

  The dump file size: 262,144

  ==================================================
  Thanks for your time!
  
  Greetings,

  Joachim

  Sorry, I was a little confused with the HDMI and VGA - continues to be the same advice.

  Looks like you have isolated to a hardware problem.  With the Intel graphics card is not posted, I have to wonder if the hardware problem is with the graphics card Intel

  FWIW - we have seen a number of overheating problems with the graphics from nVidia on your model.  Make sure the laptop is on a hard surface - and I would also use a filling of cooling (if possible) to ensure that the system is not overheating.

  Install a new copy of Intel video drivers is probably the most important thing to do now - and ensure that this card appears in Device Manager (and check in the nVidia PhysX tab to see if it appears here - even though I'm not familiar with this program).

  Try the video stress tests here: http://www.carrona.org/addldiag.html
  They can show that there is a hardware problem - but a lot of this will involve what video card works at the time of the test (even once, I don't have a lot of experience to make systems to change video card).

  Good luck!

• computer to the tv using vga cables

  want to connect my dell inspirion1420 my vizio hdtv using vga but tv cables no signal statement. Is there another way, or some sort of disk to run? Help, please

  Hello

  How to connect your laptop to your TV screen
  http://www.labnol.org/software/tutorials/how-to-connect-laptop-computer-TV-screen-LCD-HDTV/2331/

  How to connect your computer laptop/PC/computer to your TV
  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  In fact, Dell should have documentation on this on their site and more help in their forums.

  Dell support
  http://support.Dell.com/

  Drivers and Support technical
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 32HL 933 - no sound in PC mode using VGA cable

  I have a problem with the connection from a computer to the TV (32HL 933).
  I plug the VGA cable view is fine, but I can't connect the sound...
  Where TV takes an audio signal in PC mode? (in this model of TV)

  VGA cable only transmits the video signal.
  So if you want to have the sound on the TV, you use an HDMI cable or you need to connect the laptop to the TV using an audio cable additional. For example, you can connect to the headphones port in the port of the TV

• Portege Z10t connect to projector using VGA

  Hello.

  I'm having a problem connecting the Portege Z10t to a projector via VGA.
  The amount of the fine by HDMI.

  Resolution changes to screen for something like a 4:3 ratio.
  Then, he goes on the projector, rest for about 10 seconds then bombs.
  I tried several resolutions but no joy. We are running windows 8.1

  I tried a few different z10t and different projectors. Other laptops running windows 8.1 are very well, it seems that with the z10t.

  Any ideas? Thanks in advance

  First of all, it would be interesting to know what resolution you ve chosen for internal and external display.
  The Portege Z10T series was equipped with different views, but as far as I know the max resolution supported for all the screens should be: 1920 x 1080 px

  If you use the extended desktop, two screens (internal + projector) could use different resolution, but if you use the clone poster option then the resolution must be the same on the Internet as well as on the external display (projector).

• I get no "supported" when trying to connect your new monitor VGA cable. Everything goes well until he gets the logo of microsoft and begins to load vista and it comes up with the message of unsupported. Sophie Thanks__Errol

  RWhen I try to hang a new monitor with VGA computer cable runs and gives me the BIOS display then it starts to load microsoft. After a few seconds (maybe 30) it says no "supported" thanks for any help.

  Kraggyemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It's good to hear - it means that the monitor is OK and that it is compatible with Vista.  It is still unclear on the video card or the motherboard on the computer (or any other problem this computer might have) = but one step at a time.  You have made great strides and ruled out several possible causes that we must now check or test.

  What is the EXACT error message you are getting (Word for Word)?  Which is the key to product, the manufacturer, brand, model and serial number or your computer (I assume it's using the original video card)?  What i the manufacturer, brand and model of the new monitor?

  Even if you could get the Microsoft drivers (which I don't think you can), you should take them to the device manufacturer or the manufacturer of the computer, if they moved on the computer.  They are likely to be more current and have fewer problems.  And you want drivers, firmware and software necessary or required by the device (they will be either the list which is available or you can ask for help and they should direct you to what you need).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldget to the monitor, the video card and the motherboard and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope that drivers will solve the problem.  If not, we have to try something else (not sure what yet, but we will come with an option).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No picture on Toshiba Regza TV connection via a desktop pc VGA cable

  Hello

  I need help to connect my desktop PC Fujitsu Siemens for my Toshiba Regza 37 '' TV via a VGA cable.

  I bought a VGA cable, assuming it would be plug-and-play work, far from it.
  What happens is that when I connect to PC & TV VGA cable and select mode PC the screen just flickers / flashes a black screen.

  I read a few articles that you have to press FN + F8 on laptop computers, but I don't have this option on my desktop pc.

  Any help would be appreciated. Thanks in advance

  Cheerz

  Hello

  FN + F8 enable and disable the WiFi network!
  You must use the FN + F5 key combination to switch to the external monitor.

  Please also check if the VGA channel is activated on your TV.
  Then use the FN + F5 for the external video output switching

  Big names

• Link ThinkPad running Windows Vista for LG LE5300 LEDTV with VGA cable / VGA

  How can I connect my laptop Lenovo Thinkpad X 61, running Windows Vista for LG LE5300 LED TV using VGA cable VGA?

  Just TV can not detect any signal from the laptop. However, for Windows 7, no problem at all. Could it be because my laptop doesn't have the driver?

  Hello

  Run the windows Upgrade Advisor 7.

  http://www.Microsoft.com/download/en/details.aspx?ID=20

• Can I connect a VGA cable simultaneously with a DVI cable to a monitor and use the source switch?

  I found a similar, but not exact question and I was wondering if I could use the VGA cable AND cable DVI simultaneously on a HP 2159 m monitor and switch back and forth from analog and digital using the source switch on the screen? I noticed that some casual games such as found at BigFish and other gaming sites works best on VGA on DVI but I like to watch movies and other DVI instead of VGA?

  I did two HP 2159 m monitor but it could in fact be wise space more convenient to just use the right now and switch from the analog to the digital format.

  Thanks for any response.

  Hello

  You will need to edit the video in the monitor source selection when you want to switch.  Don't put it on AUTO.

  For a test, connect two monitors and then configure your PC for two monitors. Then, remove the monitor as the secondary (VGA) and now connect the cable to the main monitor VGA port.  Now try the video source selection in the menu of the monitor.  I never tried it on my 2159 m but it can work.

  Some monitors do not react to two active flows.

• Laptop computer conect to tv using RGB vga cable

  need help to connect the computer laptop dell mini inspiron to the TV using RGB vga cable

  Hello

  Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separate from their computer directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo.

  For more information, I suggest you to refer to this link and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  It will be useful.

• How to connect a laptop Windows XP Home Edition on a monitor using VGA.

  Hello

  I have a broken HP Pavilion DV1000. I don't see anything on the screen when it is tilted to normally, so I have to bend down a little to see something. for this reason that I want to connect to an external monitor using a VGA cable. Connection of a monitor on a computer Windows XP is not as simple as do on a Windows 7 PC. I don't want to extend my desktop on the monitor, but want to show my desktop on the monitor. With Windows 7, it is not a problem.

  Please give me some advice!

  Thank you.

  Hello

  Try the steps mentioned in the link

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873/en-us

• I connected my xbox 360 to my laptop with the vga cable...

  I get the sound signal of a connected device, but nothing is on my screen. How can I fix it?
  It is a brand new in the package microsoft xbox 360 vga cable. Not a knockoff.
  Is my good enough laptop, the Toshiba netbook? Missing some necessary extra juice?

  Hi Surfszup,

  See the links below and check if it helps.

  The Xbox 360 console problems

   

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  When you use your console Xbox 360 with a Xbox 360 VGA HD cable, there is no audio data, or you see any video on your TV or monitor

  http://support.Microsoft.com/kb/907603

  Connect an XBOX 360 controller for Windows to a PC http://www.microsoft.com/nz/digitallife/gaming/how_to_connect_an_XBOX_360_controller_for_windows_to_a_computer.mspx

• connect pc to HDTV with VGA.

  Want to connect PC HDTV cable is connected, the resolution changed. No display on HDTV.  Also in display settings monitor shows

  Hi solic,.

  Step 1:

  Check if your computer meets the system requirements to configure multiple Analyzer. Link, please refer to. List of maps charts supported multiple monitors and Dualview in Windows XP: http://support.microsoft.com/kb/307397

  Step 2:

  Also, make sure that you install all updates of equipment listed in windows update.

  You can check the links below: two screens are better than one:http://www.microsoft.com/athome/organization/twomonitors.aspx

  How to configure and use multiple monitors in Windows XP:http://support.microsoft.com/kb/307873

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I connect my laptop L300D to my LCD tv using VGA to VGA it works fine for a few minutes then the screens n that the laptop and TV started blinking on and outside. Can someone advise please.

  When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.

  Hello

  Try changing the VGA cables and check if it helps.

  If the problem persists, then I suggest you to update the firmware.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.