Connect the clamps in one without export

Similar Questions

• Windows Media telling me to connect the clamp at the sync but its already connected :(

  Hi all got my first clip 8 GB has spent a few hours try sort it yday put 10 albums on it no prob, then he started to say connect the clamp when it was already connected you must excuse me lm not techno of mind lol, anyway l drags files in the box and above shows a spike saying connect , BUT at the bottom of the media player it showed NSH connected clip 8 GB now l can't put any music more my clip what l do?  Sync does not work at all thanks for any answers x please if you can its spoiling my lol Sunday afternoon

  Try a simple soft reset: slide the power switch up to the position IT and hold it in this position for 10-15 seconds, then release.  Then see if it lights up normally.

  Bob

• Use the FTP first feature without exporting locally?

  Is it possible to use the FTP feature without exporting locally?  What I mean is, if you export locally and FTP at the same time,

  you have not had the chance to watch the exported output file before you upload it to your FTP site.  It seems wise to me to me

  to watch the copy exported to your local computer first, confirm that there of nothing wrong with it AND THEN it FTP to your FTP site.

  Doesn't seem to be an obvious way to do one without the other.  Is there something that I am missing?

  Thanks a lot for any input.

  brvid wrote:

  I'm trying to avoid having to use another FTP/FTP client software... I would do everything with just first if possible.

  When you make your export, make the disk only with verified and Match sequence settings tick the button at the bottom of the export side that says Import in Project.

  

  Once the export is complete, it will be displayed as part of the source of your project that you can view and check if everything is OK.

  If so, click this item in the project Panel, and once selected, export this clip with the preset to use which includes the FTP function.

  MtD

• 7310 all-in-One: connecting the HP Solution Center to all-in-One

  When you try to install for my 7310 HP solutions Center which is connected via a wireless network, I don't get this option to connect even though the Help menu shows that this option should be available.  I checked the network and it is there and I can print over the network.  I need to use the other features of the all-in-One, (e.g., Scan) so need the solution Center. Please let me know how to overcome this problem of connection.  Thanx.

  Hi @led7310,

  Thank you for joining the HP Forums!

  I have seen your post on how you try to connect your HP solution for your HP 7310 printer Center. I'm happy to help with this problem!

  Please, try the steps in this guide, printer not found during Network Driver Setup (Windows). If this does not resolve the problem, maybe try scanning without HP software. Scanner without software HP (Windows 7).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Version of the execution of database without connection

  Hi all

  I have a machine to test (Oracle Linux) where some databases are running, 4 different versions.

  Is it possible to know the version of one of them, without connecting to it? Of course, I can try all versions, but I would like to know if it is possible to avoid it.

  Thanks in advance.

  Guido

  Hello

  You can do this, but not sure that it's better to simply log - here's how it might work...

  ps - ef | grep pmon

  (find the pid of pmon)

  then

  lsof | grep | grep oraus.msb

  This will show you the House running the pmon process go

  You can then pass this House in this command

  / Lsinventory OPatch/opatch-oh | grep "Oracle Database".

  which gives the result

  Oracle Database 11g 11.2.0.2.0

  I guess you could script all that much up?

  See you soon,.

  Rich

• How to export a subdirectory of my address book without exporting the full address book?

  I use subdirectories (contact groups) in my address book for different groups of contacts. I need to move a group to a different mail client, but when you use the export function, it doesn't seem to be a way to select a single group. The export function exports the entire address group without taking into account my groups of void. Is there a way to get around this?

  Yes, by selecting the addresses before clicking on tools seems to do the trick

• My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  The steps here talk about everything that you can do other than take it to an Apple store with proof of purchase.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Connect a second monitor to the all-in-one desire

  Please forgive my ignorance on this subject in advance.

  I just bought a HP Envy all-in-One.  Model 23o014; Product F3E94AA #ABA.  I am running Windows 8.1.   I'm very happy with my purchase so far.

  I also bought an AOC E2470Sw monitor and want to connect it as a second monitor to the all-in-One.

  AOC monitor has a VGA (?-15-pin) connection), but also has two HDMI inputs.  I THOUGHT (with the agreement of my distracted salesman) that I could connect the two with a HDMI connector on both machines, but I get a blank on the AOC screen when I try.

  What I am doing wrong?

  Thank you

  Sally

  Hello...

  The HDMI connector on the base is an entry, not an output. For a second monitor, you will need to go with a USB to video card.

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory.

  Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the Internet on one of the 3 PCs

  A week ago, I suddenly can't connect to the Internet on one of my PC, although my other 2 always connect very well.  I tried to repair my LAN in network connections, so that my IP can not be renewed.  Also tried an ipconfig / renew, which gives the result of "unable to contact your DHCP server."  Ipconfig displays my 169.254.90.197, even for my default gateway IP.  Tried to turn off and reset my router.   My network card shows work.  Any ideas?

  Ipconfig displays my 169.254.90.197, even for my default gateway IP.

  This means that your NETWORK card is set to "Obtain an IP address automatically" (which is the default and confirmed you is, indeed, your property) and that the computer cannot connect to a DHCP server.

  In virtually all home networks, the DHCP server is part of the router.  Means that the message has computer cannot connect to the router, DHCP server (b) on the router is off, or DHCP (c) of the router is broken.

  Because your other computers work, options (b) and (c) are excluded.  This means that the problem is (a): the computer cannot connect to the router.

  The most frequent cause of failure of the connection to the router is there a configuration of wireless security problem, even if you do not mention if the problem computer connects via a wireless NETWORK card or a wired network card.

  Initially, access the configuration utility of your router (from one of the computers that can connect to the Internet through the router).  Confirm that

  • the DHCP server works (of course it is)
  • the DHCP server is configured to provide a sufficient number of IP addresses (this is probably true, unless someone has been playing with the configuration of your router in your back)
  • There is no MAC filter or another filter put in place in your router that is off of your computer to 'problem' (as in the previous point, it is probably also true for the same reason)

  If you use a wired NETWORK adapter, the likely problem is hardware: either the cable is bad, the port in the router is bad, or your network card is bad.  To test these conditions, the simplest method is to swap the known parts of work.

  If the wireless connection, go to your wireless router configuration utility section.  First of all, make sure that your router is configured to use the correct wifi band which is compatible with all of your devices (A, B, G, N) wireless.  Although it is unlikely that this parameter has changed since a week ago, it should be confirmed (the usual problem with an older wireless adapter, say wireless B, trying to connect to a router, the 'G' value only rather than 'B & G";) even for wireless-N).

  At this point, you have two options:

  Option 1: Write down all settings relevant wireless configuration then go back on the problem computer and try to connect using the correct information.

  Option 2: temporarily disable any security wireless to the router and see if you can connect.

  Whichever option you take, you'll want to remove the Wireless 'profile' of your computer before you try to connect.  If you are using Windows WZC, right-click on the icon for the adapter wireless in network connections, click Properties, then the tab 'wireless networks '.  Find your network (SSID) in the list of preferred networks and remove it.

• How can I configure my Internet XP connection so that it will automatically connect to my WiFi (wireless) without asking me the password whenever I connect?

  How can I configure my Internet XP connection so that it will automatically connect to my WiFi (wireless) without asking me the password whenever I connect?

  original title: automatic Wifi connection

  Hello

  By default, Windows XP attempts to connect to networks without wires in the following order:

  1. Available networks that are in the list of network preferred (by order of registration)
  2. Preferred networks in the list proposed (by order of registration)
  3. Other networks according to selected advanced settings

  Check out these articles and check if that helps:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wireless_networking_overview.mspx?mfr=true

  To connect to an available wireless network

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_connect.mspx?mfr=true

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

   

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• How can I close the Client Services for Netware that is me project to use the fast user switching without losing my internet connection

  For NetWeare customer service

  How can I close the Client Services for Netware that is me project to use the fast user switching without losing my internet connection

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Forum.You IT Pro can follow the link for your question:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Connect the USB cable on my 5510e-all-in-one wireless HP Photosmart printer

  Need me 15 minutes to print a page using my network wireless at home. I decided to connect the printer with a USB cable, but the installation of HP - written installation guide - instructions only show the USB wireless method. I already bought a SPEAKER cable so I'm readt to go one time that I get help. My laptop, that I intend to connect is a dp4 Pavilion from HP with Vista. Thank you.

  Hi there billham68 and welcome to the printer HP consumer Forums.

  Here is a link that should help you in the accomplishment of the task at hand.

  Installation of the software of the printer in Windows for a USB cable connection

  http://support.HP.com/us-en/document/c03521864