connect the dsi to wireless router

Similar Questions

• Cannot connect to the nintendo wii wireless router

  Original title: WiFi

  IM problems to connect my nintendo wii to my wireless router, my laptop seems to connect very well, but I can't connect to the wii, for some reason I can't find the router or connection Wireless on my pc to try and solve the problems there. im not all that computer savvy so any help will be greatly appreciated thanks.

  Hello
  You try to connect the nintendo Wii to router or laptop?
  
  Try this:

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '.

  3. click 'Connection settings', and then select a connection that marked 'None '.

  4. Select "Wireless connection" and "Access Point search."

  5. choose what access point to connect to, then click on 'OK '.

  Manual installation

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '. Click on "Connection settings" and choose an open connection that marked 'None '.

  3. choose "Wireless connection" and "Manual Configuration".

  4. Enter the SSID of your router. Click on the blue arrow to the right of the box to move to the next screen.

  5. Enter the security information. If you don't use WEP or WPA security, go directly to the next screen.

  6 choose whether or not to auto-obtenir address IP and DNS information. If you choose auto-obtenir, go to "Advanced settings" and enter your information of intellectual property.

  7. the MTU value. Most users leave this field empty, but it can be set to 1500 if you have connection problems.

  8. choose 'Save' and 'OK '. Select 'OK' to test the connection.

  If this does not work, contact nintendo for best support.

  Online connection support

  http://www.Nintendo.com/consumer/systems/Wii/en_na/online.jsp

  Troubleshooting wireless router

  http://www.Nintendo.com/consumer/systems/Wii/en_na/onlineWirelessRouterTroubleshooting.jsp

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Laptop says that it cannot find certificate needed to connect to D.Link wireless router

  Laptop warned Validating identity when I try to connect to D.Link wireless router signals.

  If you get the error message is the one mentioned in the subject of your message, it means that you have turned on (probably unintentionally) 'corporate' wireless security type (aka 802.1 x).

  Right-click on the icon of your adapter wireless network connections, and then select Properties.

  Click the wireless networks tab.

  In the list of "Preferred networks", select the entry for your network and click on the button 'properties '.

  Click on the tab "authentication."

  Make sure the box "Enable IEEE 802. 1 x authentication for this network"is disabled.

  OK your way out.

  Restart (just in case).

• 4600 pro connects to the Linksys WAG354 Wireless router!

  Hello

  I have a Toshiba Satellite Pro 4600 with internal wireless card. I'm trying to connect to my Linksys WAG354 wireless router. The laptop seems to connect but only get a connection status ' Limited or no connectivity "note computer says it has problem because the network has not assigned a network address of the computer.

  I called Linksys, but the call center do not have a lot of help! They said that I should update the driver for the Toshiba wireless... I did that, but still the same problem.

  I am running windows XP. I have two other laptops connected to the router WAG354 and they work fine.

  Any advice would be much appreciated.

  Hello

  I agree with Michael. I think that some false setting is responsible for this. If your network is visible for the laptop, the features of the card are OK and the problem parameters.

• New S10 could not connect to the Netgear WGR641v8 wireless router

  All,

  Really frustrated with the nine s10 that I received this afternoon. All my other laptops are able to connect to the router Netgear wireless fine but this one. I could connect the s10 of unsecured networks of neighbors very well, so it doesn't seem to be a hardware problem. More compatibility issue with built in network card wireless Broadcom and Netgear chipset. I was able to connect to the local network with thin cable.

  Anyone have any better ideas? I updated latest firmware for the router. I think also got the latest version of the driver for the adapter. Where is the problem? I tried setting secured or unsecured (no password) for the router, no luck. I'm scratching my head right now.

  This is the first time ever, I have a new laptop failed on me. I contacted the customer service and the guy had no idea.

  Anyway, thanks in advance.

  The WGR641v8 has enabled ' Access List' (it limits the devices that can connect to only those network manually allow)?

  I have a Netgear DG834G or something like and a S12 (I think it was the same as the S10 (but not sure) WiFi adapter), once I'd added it is MAC to my list of access routers, I was able to connect without any problem (actually I use said WiFi connection right now).

  [edit] Also, check what encryption protocol you should use and what windows uses - he can't pick up the correct one to use and if the connection is a fail for this reason. [/ edit]

• What is the Module Microsoft Wireless Router?

  that must be the "module on microsoft wireless router.  I have Windows 7.

  Well,.

  Although we still don't have a definitive answer to the "what is...". ' question, the problem that you described, Cyrus, is very similar to what I experienced market with the Vista computer, I use now, since I got it, in fact.  In other words, a signal Wi - Fi can be used by everyone in the House solid, but every now and then I am unable to connect with this machine.  A router reset always restores the feature, and I've found over the years that the router has something to do with her, a daily loss of service with a couple of marks and perhaps a month going with the other (the one I use now).  But the problem is always specific to that computer.

  And the wireless adapter (USB type) on this machine is not a problem; I used several years without any difference.  It's as if this computer gets "kickoff" of the network because of its specific computer name or that it either, and in my case, the network does not even appear on the list of those available.  I can see the neighbors across the street and block, but not my router... until I reset, that is.  Maddening.

• BlackBerry smartphones can not connect to ISP via wireless router.

  I have my cell service through T-Mobile and recently upgraded to a Bold 9700 with internet service. I can browse the internet via 3G network and an address of hot spot using Wi - Fi. What I can't do, is access to the internet via my router wireless at home. The router Netgear (WPN824 v3) works very well via the modem cable for laptops and smartphone Motorola click on my daughter. When I turn off the 3G network, I get a "cannot find server message".

  I went through the technical support to the company of cable, Blackberry and Netgear without solution. The problem seems to be with the router, but I can't find a way to fix it. I'm about to buy another phone or router. If anyone has any ideas please help. Thank you

  It works!  I've accessed the configuration of the router. It would work without security. It would not work with WPA - PSK [TPIK], I activated the two WPA2-PSK [AES] AND WPA-PSK [TPIK] AND IT is CONNECTED. I don't KNOW WHY, BUT I SURE AM HAPPY. I guess the BB don't like TPIK

• Unable to connect to internet via wireless router

  Original title: router Question through the network

  Hello!

  Basically, I use NET connection of type PP - Poe, that requires a user name & password to connect. I have 1 Mbps plan of development. recently, I bought a D-link wireless router.
  Connectivity is as---> main internet cable in this way will my internet port of the router. One cable goes on my desk from the LAN1 router lan port. I have configured my router with all the necessary parameters saved & now when I start my computer I dnt need to put the user name and password to connect to the internet.
  I is automatically connected to my network using the router I think.
  Now, the problem is that I use it more than 3 to 4 months. but now, when I start my pc, the network icon on the keep the taskbar on the search for the network all the time.
  Oh, I can't do something, or I can use my cursor also because I move my cursor, but cannot use it. Thus, in this condition I vigorously shutdown my pc, the turnoff to my router & then I start my pc. so if I want to connect to the network, I remove the mains cable and the plugin on my office lan and evrything port works fine. in this State I put the user name and password to connect to the internet.
  SO the thing is these days each time, I keep my router IT and start my pc to the Dungeon of the taskbar, the network icon on the turning points for an unlimited period.
  then, when I am facing this problem I keep my pc WE & the turnoff to my router, then after some time the icon bar of the tasks of the network stop (research or rotation) and it's yellow exclamation point. then use the internet I remove the cable main network from the router and connect to my office. He asks username and password then the connection works fine.
  I am using windows 7 ultimate 64-bit.
  still a very strange thing is when I'm dealing with this network icon turning question I connect my cell phone to my wi - fi router & it works well, but the scenario with my office is the icon itself keep turning. I use a basic wireless router. model No.:. DIR-524.
  I hope, I tried my best to explain my problem.
  waiting for the answer.

  Hello

  First of all, make sure that you have the latest drivers installed for the network card.

  I can suggest you to run the network troubleshooter and check.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• Upgrade to the new (different) wireless router

  If I install/upgrade to a new wireless router, is there any software (Linksys or other) I need to uninstall first?

  Thank you.

  Ron

  bigdave240

  Thanks for the reply, it sounds good.

  Ron

• The question of the Access Point wireless router

  I am considered to be an amateur when there are routers so patient with me. I have a wireless router in my office and two workstations are hardlined (ethernet cable-joint) to the router. Then, in the living room, I have 3 devices (Xbox, BlueRay, directTV) I want on the network. Rather than running three office ethernet cables, I expect to have some sort of (reverse hotspot) where a device could hop on the wireless router and the signal I inflexible at these three devices. Not sure if this would require an Access Point or another wireless router?

  Any thoughts would be appreciated.

  -J

  I suggest that you try to find something on WET54GS5... is a bridge with 5 ports wireless if I'm not mistaken... but since it's under Cisco Small Business, I suggest you could ask more about it here

  Cisco Small Business support community

  Or you can see WET54G and buy a separate so you switch can accommodate other devices
  

• the officejet pro 8600 can connect more than one wireless router?

  the officejet pro 8600 can connect two separate wireless routers?

  Hi Thetinman,

  No, it is not possible that you can be connected to 1 router at the same time.

• The 5 GHz wireless router connection

  I have 2 laptops (Inspiron 1525 and 1545) and I was wondering if I can connect to my dual band 5 GHZ router with this?  I don't see the SSID in my area wireless on my computer.

  My laptop are compatible with a connection to 5 GHz?  If not, is there an adapter for it, how much, and it is easy to do?

  Alex,

  A wireless USB adapter 5.0 GHz network is the fastest and easiest way. You can buy a card to install the appliance. The adapter inside the probable has 2 sons

  Rick

• How is the best way to connect the configuration of my router and switch?

  I have a cable modem. connect to a switch, I have 2 computers connected to the switch. I also just connected my router wireless switch. That's the best configuration or I lose my firewall of the router in passing is not by ports directly above?

  Most of the cable modems will give an IP address, so connect a switch to the modem and then connection of two computers and a router to the switch will usually result in one of these three devices, get an IP address (and internet connection), while the other two will not be.  (Notice that I guess a true "Modem" and not a "Modem/Router" device).  The correct configuration would be to connect your router to the modem (router gets the unique IP address).  The router can then process from the addresses IP what either side LAN of the router, then plug the devices you need (including switch) to the router's LAN ports.  This also ensures that all devices will be on the same subnet that your connection scheme to separate devices on the router wireless from the other two devices on the switch (here, assuming that you have a router/Modem device).

  HTH,

  JW

• Wireless keeps expire when I try to connect to my new wireless router.

  Atheros AR5007EG

  I have a Toshiba laptop with Vista with the above wireless adapter and it keeps time when you try to connect to my new Brighhouse Ubee router. I tried everything but can't seem to make it work.

  Hi, PeterBlum,

  Try changing the SSID the network ID.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Atheros-AR5007EG-wireless-network-adapter-not/27ef5891-96d5-4914-a6b2-9b3813400ef9

  Method 1:

  Run the network troubleshooter, and check if that helps.

  Open Network Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2:

  Update the network adapter driver and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: If you use Internet Explorer, then we recommend that you check if proxy server settings are turned on. To do this, try the following steps:

  a. disable the proxy on Internet Explorer (IE)

  b. Click Start, type inetcpl.cpl and press to enter.

  c. click on the Connections tab, click the LAN Settings button.

  d. uncheck "Use a proxy server for your LAN" under proxy server.

  e. click ok to apply the changes.

  f. open Internet Explorer and check if the problem persists.

  Method 4:

  Try the steps in the following Microsoft article and check if it helps.

  Problems of network in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Method 5:

  Disable IPv6: (If your PC is in home network do not perform this step)
  Try to uninstall IPv6 on all interfaces, removing any IPv6 virtual cards and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: you should do this for each network connection.

  Hope the information is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/poor-network-connection-with-Atheros-AR9285-and/c0d02f73-e31f-4ec8-b822-1ff80d34c839

• Cannot connect to new modem/wireless router with Dell Inspiron 510 M, but our other machines will connect without problem.

  Old modem/router died, received the new modem and Netgear router separate from Comcast

  Two other laptops (MSI Wind Windows XP, HP 6930p-Windows XP) and my Samsung smartphone connect with no issues.

  Dell Inspiron 510 m is able to connect to the network without wire of a neighbor, but none of our other machines are able to because of the configuration of network security.

  When the network security key for our network on the printer Dell, Dell dialog box displays only 8 digits, but the security key is 10.

  Hello

  Replace the key to WEP (wired equivalent privacy) security check and the settings of the router if you are able to connect. Follow the steps mentioned below.

  Change the WEP key in Vista:

  a. click the Start button.

  b. click Network in the right column in the start menu.

  c. click Network Center in the menu bar horizontally.

  d. click reorganize wireless networks.

  e. double-click the wireless network you want to change.

  f. click on the Security tab.

  g. changing the network security key and the encryption type.

  h. click OK.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.