Connect the external monitor to my Sony VAIO laptop Win XP

Similar Questions

• WT8-B-102 - how to connect the external monitor

  Hello

  I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
  My tablet doesn't have an hdmi port.

  Any solution?

  Best regards
  Francisco

  Hello

  WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.

  But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.

• How to connect the external monitor to Satellite T130-C17?

  It has a HDMI port on my laptop and I would use it to connect to a monitor...
  The monitor supports DVI and VGA...
  So I thought that buying a VGA-HDMI would do the trick...

  Unfortunately, when I plug it almost doesn t do something...
  I want to use the monitor as my monitor 3rd btw. That's why I want it on the HDMI port.
  The resolution isn't really a problem for me because I put t want to do something great graphics on it anyway.

  For me, it makes sense to use the HDMI Cable DVI and not to use the VGA port.

  This third monitor is a little strange to me.
  You want to connect two external screens/monitors to your laptop satellite?

• How to connect the external monitor for Qosmio G30 with a HDMI cable

  Hello

  I have G30 also I have Samsung 32 LCD screen LA32S8
  I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.

  I would also like to ask;
  Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?

  THX and I need this help.

  Hello

  1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
  2. turn on the TV or monitor first and then the Qosmio G30.
  3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.

  Check it out

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• Qosmio x 70-A-12-question on the use of the external monitor

  Hello

  am about to buy an external monitor and I was wondering what would work with my laptop.
  I want to it works like an additional surface (not a copy of my current screen) with both screens at the same time working.

  My laptop seems to have a VGA port and an HDMI port.
  I've already tried via the HDMI port with an old - probablybroken-monitor, but that has not worked.
  I don't know if this is due to the screen or my laptop.

  I also tried to search for VGA monitors, but when I checked the specs for my laptop, it does not list it could connect a monitor via VGA...

  Anyone know what would be really work?...
  Thanks in advance!

  As you have already said: the laptop supports the VGA monitor (RGB) as well as the output port HDMI output port.
  So, you can use one of the ports to connect the external monitor.

  Today, the HDMI port is a standard interface that is supported by almost all external monitors and I recommend to use the HDMI connection. HDMI supports digital signals and provides the best image quality.

  So it s your choice now to choose a good external monitor work.

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Connect an external monitor to an Equium L10-300

  Hello

  I wonder if someone can tell me how to connect a Viewsonic external monitor to a laptop Equium L10-300?

  I unplugged the screen and when I got to reconnect again I got a message "No signal input" on the monitor. I sent the manufacturers of screens that said I had to turn on the laptop, wait for Windows to load, and then press and hold the function key, while pressing F10. There is nothing! Before that, they said that I needed to press the feature key followed by the key with the monitor symbol F on it, it doesn't work anymore!

  Can someone help me out here?

  Thank you

  Jodie

  Hello

  The laptop supports a port external monitor (port/VGA RGB port).
  You need a VGA cable to connect the external monitor to this port of s for laptop.

  After that, use the FN + F5 key combination to switch to the external video output
  All that s

  If the buttons FN n t work then you must install the utility of the European driver Toshiba page shortcut

  PS: I assume you are using Win XP
  You can also do this:
  Right click on the desktop
  Choose Properties
  Has chosen the last settings tab
  Choose Monitor 2 and check extend my Windows desktop on this monitor

  Welcome them

• Black screen after on native screen only hp logo, but the external monitor is ok

  Hello everyone. HP Pavilion dv9700.

  The graphics card has been burned, and I ordered the new motherboard of eBay and replaced it.

  The problem is:

  When I turn on the unit, the native screen flashes once the HP logo then it becomes black. If I unplug the video cable and connect the external monitor, it works perfectly. The same thing with remote access. I start with a blank screen, and I can connect remotely to the laptop.

  What did I miss? where to look for potential problems?

  the problem has a link between motherboars and display.  I could see the screen by moving the display cable. Maybe it's because the poor quality of the motherboard, I bought

• Portege R500 - no image on the external monitor

  Hello everyone

  There is no image on the external monitor on my Portege R500 with Win XP SP3.
  The screen seems to receive the signal, but the screen remains black.

  Anyone know a solution for this problem?
  Sorry for my bad English.

  Thank you.
  Daniel

  Hello

  How have you tried to exit from display on an external monitor?
  Usually, you use the FN + F5 key combination.
  This allows you to switch between the two screens; laptop + external display.

  I had a problem to view a video on the external monitor because the video is already running. You must switch to the external display until you start the movie, etc.

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• Satellite L40 - BIOS - the external monitor connection preferences

  Hello!
  I have some problems with the external monitor (CRT) connection for laptop L40 - 17O (PSL4CE).
  Matrix on it is broken. There is no windows installed.
  I connect external monitor, but I don't see anything. I heard that it is necessary to change something in the BIOS, but it's hard to do that without image =)
  Would be great if someone who has the same note would say what button to press to enter the BIOS and change the options in this way. Or perhaps someone could take a snapshot of the bios and its options.
  I'm looking forward to see answers)

  Normally it should be an option in the BIOS where you can choose, if it isn't the internal LCD screen, or both or is automatically activated after connecting a display to the machine.

  Under Windows, the combination FN + F5 does exactly what you need: it goes from the screen.

  Could you please check your BIOS and attention to the options in the form? I guess that basic finding. :)

  Welcome them

• How to connect an external monitor to the hp slate 21 pro

  I have a HP Slate 21 Pro. Anyone know how I can connect an external monitor to reflect what's on my tab

  Hello

  There is no way to connect an external cable monitor such that HDMI port is entered only.

  Your only solution would be to use the wireless display option in the settings, but you would need a monitor/TV/adapter that would work as a Miracast receiver.  I'm not sure specific screens that function as receptors, but I used adapters are the PTV3000 Netgear and Actiontec SBWD100A01,.

  I hope this helps.

  Kind regards

  COWA

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.