Connect the Satellite L500-19Z in TV

Similar Questions

• Re: Satellite L500-19Z - how to increase the performance of the game?

  Hey

  Basically, I have a Toshiba Satellite L500-19z, with chipsets Intel Series 4 express. I know this isn't a particularly good game, but surely the performance of game should be reasonable?

  I get 80% of the time lag - while on my old laptop (which costs no more than £200) I could play World of Warcraft on it no problem (I played the Sims3 on this laptop and had very few problems. I'm playing Dragon Age, but it is almost impossible.) My laptop is not more than 8 months old.

  I just want to know if there is a way to increase the performance of the game? I thought that maybe to connect my laptop to a PC Tower, but that could lead to the worst game performance, so I said.
  I'm sure I can't replace the graphics card, I've updated my drivers, defragment disks and so on.

  Any help is really appreciated, thanks in advance.

  Hello

  Is there anything to do to increase game performance. It depends on the graphics card and Intel cards are not designed for games, they are a good choice for mobile use because they don t need a lot of power.
  In addition, the peut t graphics card be exchanged, s thereby.

  It s always depending on the game that you can play. Therefore, check the system requirements of all the games you want to play and if your graphics card is supported. Not all games support all graphics cards.

  You must also use low graphics settings in each game. You can use the parameters of t.

  For example on my Satellite U400, possessing the same Intel graphics card, I can play Half Life 2 which has already 5 years but always low medium graphics settings.

• Satellite L500-19Z - recovery process is not complete properly?

  Trying to reinstall my system Windows 7 on a satellite L500-19Z. When I insert the recovery disk it ends and then restarts.

  When reboot it goes through the "system registry' and 'system settings' and then restarts. He said Athens 'set up for first use.
  Then it comes up with a white screen and the box saying "the finalization of installation - will take a few minutes" etc.

  However, after a while it just restarts and goes through the same sequence again - and again - and again etc.

  I can reboot into safe mode, but it will not make a system restore point.
  When I try to reboot normally it just goes back into the routine above.

  I tried a number of recovery disks, but they all do the same thing.

  > I tried a number of recovery disks, but they all do the same thing.
  This means that you have more for this model of laptop recovery disk?
  Did you use the right method?

  I'm not very well why the recovery procedure ends correctly, but it might be possible that your laptop s equipment is affected m.
  What was the purpose of a recovery? Something was wrong with the laptop?

• Can I order Win7 64 bit for Satellite L500-19Z recovery disk?

  I have a portable Satellite L500-19Z that was running a 64-bit version of Windows.
  Due to a problem, I had to reinstall Windows. The disc that came with the laptop was produced Recovery Windows 7 Home Premium 32 bit. Not realizing the implications of the re-setup using this

  Now, I'm done with a 32-bit operating system, which means that I can use only 3 GB of my 4 GB of RAM. Can I get a recovery disk for the 64 bit version of Windows? I created, when I got to the laptop, a repair for my 64-bit system disc, but, of course, if I try to use it he said, rightly, that I do not have a compatible operating system version.

  I think that you can order.

  Please visit - https://backupmedia.toshiba.eu/landing.aspx

• I would lose my data recovery Satellite L500 - 19Z 64 bit system?

  A few weeks ago, I posted a thread on the repair of recovery disks and disks. Basically I have a portable Satellite L500-19Z that was running a 64-bit version of Windows.

  Due to a problem, I had to reinstall Windows. The disc that came with the laptop was produced Recovery Windows 7 Home Premium 32 bit. Not realizing the implications of the re-setup using this.
  Now, I'm done with a 32-bit operating system, which means that I can use only 3 GB of my 4 GB of RAM.

  I didn't know that I had actually created a recovery disc at the point where I bought the laptop.
  I could use it to allow me to return to a 64-bit system?

  I would lose my data (I can back up) and I would get a 64-bit system on a system that is currently a 32-bit system?

  Hello

  The use of the recovery disk would fix the laptop back to factory settings which mean that the HARD disk should be formatted at the beginning of the procedure.

  In this case all data would be erased from the HARD drive

• Cooling warning on Satellite L500-19Z

  Hello

  I'm on a Toshiba Satellite L500-19Z and I get the "warning: a problem with the cooling system has been detected." Message please turn the computer off immediately and return it for service.

  The cooling system apparently works very well: PC Health Monitor says the fan works, and using Speedfan, I see that the temperature is kept below about 53 degrees celsisus. I think I can hear the fan and the openings on the side and the bottom of the laptop are quite clear.

  I live in a cold place and do not use the computer for any activity of intensive treatment, so it would not be a reason for the hot computer even when, as far as I know.

  Help, please.

  It looks like a bug or software.
  In any case, it s good new that the cooling module must not be maintained.

• Strange problem with touchpad on Satellite L500-19Z

  I have an older one month by Satellite L500-19Z running on Windows 7 64 bit.
  While using it to edit photos, he began to behave strangely. It was as if someone was quickly down the left button of the mouse. I have been unable to leave any program or use the Start Menu to restart.

  After turning off the power supply and the battery, I started it in Mode without failure, but the problem was still there. If I flew over any icon that he raised the window several times. By disabling the touchpad through Fn + F9, I was able to use a graphics tablet to re - start and it works normally. I hesitate to use the recovery of the system or the recovery disks that I created when I bought it because of the number of third party programs that I would lose.

  Everyone knows the problem please? What should I do to activate the touchpad see if it works fine now?
  Thank you very much

  Hello

  Can you turn the touchpad by pressing FN + F9 as usual?

  In your case I would also update the driver for the touchpad. You can download it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If an external mouse works but the touchpad is still problems, I think that you need to use the Toshiba Recovery disk to restore to factory settings. After that, you have the same settings as on the first day where you bought the laptop.

• Re: My Satellite L500-19Z does support DDR3 memory?

  My Satellite L500-19Z does support DDR3 memory?

  In my view, it has 4 GB (2x2gb 200 pin 1.8 v DDR2 SoDimm PC2-6400) memory standard (800 MHz I think). I want to move to 8 GB and I saw the following offer: -.

  8 GB (2x4gb) 1333 Mhz PC3-10600 memory Kit.

  My laptop will support it?

  I hope someone can help.

  Concerning

  > My Satellite L500-19Z does support DDR3 memory?
  Say the user manual?
  Did you check that?

  The support of memory depends on the chipset.
  If the chipset does not support DDR3 so you cannot use it.
  The chipset is Mobile Intel GM45 Express Chipset and AFAIK that support DDR2 800 MHz 8 GB max memory chipset.

• Problem creating discs of recovery for the Satellite L500-126

  Hello

  I have a problem of creation of recovery for the Satellite L500-126 disks.

  I'm using the Toshiba Recovery Disk Creator.

  The 1st disk is ok.
  When I try to do the 2nd drive, the systems stops exactly 50% of the 2nd drive. and no more reaction from the creator of disc.

  I tried 2 x, and every time I had to give up and throw the dvd.

  any suggestions?

  Hello

  You should try another DVD from different manufacturers
  It s nothing unusual that some DVDs are not totally compatible and CD/DVD players cannot write data correctly
  I had this problem in the past and could solve this test and using different DVD.

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• I can't connect my Satellite L500 WLAN

  Laptop:
  Toshiba Satellite L500, windows 7 Home premium

  Problem:
  Something wrong with the wireless adapter, where it works very well for 30 minutes after the start of the computer, but all of a sudden, it is is turned off by itself and I couldn't allow it without having to restart the system. I tried to adjust the properties of power management of the adapter wireless, but for some reason that I could not reach it (tab power management in the adapter properties window is not there!)

  The problem is not because of the router because my other devices has no problem with the WiFi connection.

  Help, please

  Have you noticed this problem with the power supply batteries, power supply or using two of them?

• HDMI does not not on Satellite L500-19Z

  I have a L500-19Z running Windows 7. Until yesterday, the HDMI output jack worked very well.
  However, now when I plug a cable in maintaining the screen goes blank and then back to normal.
  This continues for a few minutes and then when I try to output for example a TV it shows as not connected.

  Anyone have any ideas on what could be the cause?
  Device Manager indicates that the device is functioning OK and I checked that the driver is up-to-date.

  I am confused now!
  All responses may also be sent to [email protected]

  Hello

  Have you tried the Fn + F5 option?
  This switch, the video output for external monitor or TV.
  You have to press several times to select the TV.

  The value also default BIOS and test again

• May be defective lid switch on Satellite L500-19Z

  The monitor on my L500-19Z is off to angles more in lower - right now, it stops to open near 90 °.
  Am I right in thinking this is probably the lid switch and if so is it what can I do about it?

  I think that cover switch doesn t react when the display is open 90 °. This switch reacts when the cover is almost closed.

  There must be another problem, probably display connectivity to the motherboard (wired to the display).

  The warranty is still valid? Maybe you should contact Toshiba service and leave check your laptop.

• Helps to connect the Satellite A100 HDD IDE

  After a disastrous accident defrag I can't start Windows XP. I want to connect the hard drive to another computer via an IDE cable in a portable control box.

  My hard drive has previous Toshiba to an IDE connection, but the Satellite Pro A100 seems to have a custom connector, which I've not seen before. Anyone can help a way to connect the IDE hard drive, so that I can recover my data before using Recovery CD which will, of course, wipe the hard drive?

  Kind regards
  Robert

  Hello, Robert

  Perhaps this paper can help you http://support.toshiba-tro.de/kb0/TSB5A01690000R01.htm

  Bye and good luck!

• Cannot retrieve the Satellite L500

  Hello

  I have a toshiba Satellite L500 and windows vista is full of AppCrashes, so I wanted to restore the windows partition. The problem is that I can't start the rom of windows recovery by pressing F8 or hdd recovery by pressing the 0 key. When I press f8 and choose the windows recovery it just ignores me, shows me a Scott blak and the menu again.
  I tried to use Hiren boot to start, before my pen burned and I could leave them recovery, I just can't boot from them.

  Thanks in advance

  Hi Luis

  To be honest I didn t understand what happens exactly but check it please follow Toshiba document -.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm
  and check how it works.

  Please post comments with exact explanation, which occur when you try to start the installation of HARD drive recovery.