Connect the second VGA monitor to Pavilion HPE

Similar Questions

• Not able to connect the second monitor

  Original title: Second monitor visible only on the first plugin

  Implementation:

  New (Nov 2014) Lenovo PC

  AMD A8 H535

  Windows 8.1

  AMD Radeon HD D 7560 w / VGA output and an HDMI output

  Two HP w1907 monitors (resolution is identical on both screens - when they work together)

  Question:

  Last night I plugged my second monitor to the HDMI output with an HDMI adapter / VGA of the Amazon ( adapter ), plug the monitor into it has not come and via the control panel (I tried both via the control panel and some change PC settings) could not detect the second monitor. Then, I went to the HP website and downloaded the drivers, but to no avail. Then I reached down and unplugged the second monitor and resettled to make sure that there is a link, this solved the problem. The monitor came and no further investigation was necessary. However, this morning I woke up the computer to a single monitor and still unable to detect the second monitor. Only when I unplugged and re-inserted the link it works.

  I'm at the end of my rope and need help with this, thanks in advance for any help you can provide.

  Hello

   
  I understand that you are not able to connect the second monitor to the computer. This problem may occur because of outdated or damaged display card drivers.
   
  So I suggest to follow the steps mentioned below and check if help them.
   
  Method 1
  Please check the steps mentioned in the link below to check that everything has been done correctly to connect the second monitor.
  Plug a second monitor or projector
  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors

  Method 2

  Install all Windows updates and check if it solves the problem. You can check the below link to do.
  Windows Update: frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
   
  If problem still persists, go to method 3.
  Method 3
  Uninstall and reinstall the display driver and check if it helps. First download the display driver and save it to the computer. You can download the latest driver to display from the link below.
  http://support.AMD.com/en-us/download

  Uninstall the display driver, then reinstall it. Follow the steps
  mentioned below to uninstall:
  1. press Windows + R, type devmgmt.msc , and then click ok.
  2. now, find and click with the right button on the display driver and click Uninstall.

  Also install the catalyst for AMD. You can download it from the link below. http://support.AMD.com/en-us/download/desktop?OS=Windows%208.1%20-%2064

  Hope this information helps. Please get back to us if you need further assistance.

• What do I need install the second hard drive HP PAVILION: p6633w

  What do I need install the second hard drive HP PAVILION: p6633w?

  donp815 wrote:
  

  What do I need install the second hard drive HP PAVILION: p6633w?

  Hello

  You need two cables, one is a sata cable:

  http://www.play.com/PC/PCs/4-/30305659/706331346/STARTech-com-6in-SATA-to-right-angle-SATA-serial-ATA-cable-female-SATA-female-SATA-6-inch-red/ListingDetails.html?_%24JA=TSID:13315% 7Ccat: 30305659% 7Cprd: 30305659 & kw = {keyword}

  This cable is only for data and connect the hard drive to the SATA connector on the motherboard.

  The other cable is energy:

  http://www.itpartsdirect.com/STARTech-15-24cm-4-pin-Molex-to-SATA-power-cable-adaptor.html

  It connects the hard drive to the PSU.

  You can also buy a combo like this cable:

  http://www.Amazon.co.UK/DP/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4

  All you have to do is to connect the hard drive and that's it. Make sure that the main drive with the operating system is connected to the primary SATA connector (I think there are the numbers 1, 2, 3...)

• HP Pavilion HPE h8-1032 desktop PC NEW... try to connect my w/VGA monitor

  and it's not like the previous post, it IS a VGA port, but it is covered and says "do not remove". So we released the cover and the connected monitor, but it does not work. (I know I know it says DO NOT DELETE ) What is the problem? Do I have to just buy a converter plug? Why the VGA doesn't work?

  Thanks in advance,

  Hello

  The case is that the VGA port is disabled by the bios when there's a video card is installed. It's one or the other but not both.  Ports are covered by HP to avoid confusion, where the label DO NOT REMOVE.

  If you have the Radeon HD 6670 then to connect a VGA monitor you will need to use an adapter DVI to VGA.  Review the information under graphic Video.

  I don't know what monitor you use but if you have a HDMI or DVI connection on the monitor, then use the appropriate digital cable.

• Connect DVP8 to VGA monitor

  Hi people,

  I know there is a lot of info out there, but most does not apply to my situation.

  Is it possible to connect my compressed DVP8 wire to my VGA monitor?

  If so, can you please tell me what I need to buy to do this and how I would make the connection to make it work. Sound is not important.

  Thank you!

  Plug a microUSB adapter and then the DVP8 connect to the displaylink adapter. Download the displaylink drivers and the monitor then plug the displaylink adapter. If you want to load the DVP8 when you are connected to the monitor get the dongle from dell.

  USB adapter: http://amzn.com/B00871Q5PI

  DisplayLink adapter: http://amzn.com/B004D0QC0A

  Dell + dongle load data: accessories.dell.com/.../productdetail.aspx; l = en & s = dhs & cs = 19 & sku = 470 - ABES

• Is there a way to make the second blank monitor?

  I have a Mac mini 2014 with two monitors, set up as a mirror.

  I have the need to move the second monitor on and outside - which is remote from the computer - directly from the computer.

  The second monitor is used to display videos, presentations and so forth only when it is necessary.

  How can I do?

  Thank you!

  The following function

  http://www.CNET.com/news/options-for-sleeping-displays-in-OS-x/

  and looking at the characteristics of switch-X it should work

  SwitchResX _ resolution Control for Mac

• Portege R500: unable to connect the remote DVI monitor via Dynadock

  Hello

  I just connected Dynadock (DVI) with my Portege R500. The cell would be supported - according to Toshiba - but my experience confirms that Dynadock is not able to access the DVI ports. This implies, that Dynadock is nothing more than the USB HUB.

  My setup: Vista 32 company b (CZE edition), the latest patches, Toshiba R500.

  Software: latest dynadock software 2.3 c.

  Symptom: I can't connect to the remote DVI monitor via the dynadock, there are only two external panels with 800 x 600, but Vista does not allow me to choose.

  More information: software Dynadock requires to run without Microsoft Defender, otherwise it blocks the service: DisplayLinkService; file:C:\Program Files\DisplayLink base Software\DisplayLinkService.exe
  If you turn off the MSDef, the "error 2738" message appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
  Yes, I know the VBS question and the problem is not caused by VisualBasic - VBS "Hello World" runs.

  If you think always, Toshiba Dynadock is compatible with Toshiba R500, then press Fn + F5 and look at your logs and you should find something like:
  In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.

  I look forward to the comments, advice etc. If you are able to transmit this bug report to a responsible engineer, do please.

  Hello Leo

  As far as I know, Toshiba has not designed for laptops models own only Dynadock and it can be used on every laptop or fixed. Because of this, I think that this statement about model of care is not so important for this problem.

  Toshiba provides devices and software. To connect using the USB port, and these ports must each computer or laptop. I hope that you have installed the software by following the on-screen instructions (device of should not be connected to the start-up of the plant).

  Is your Portege docked the host or you have connected Dynadock directly in Portege s USB port?

• connect the second computer to the network

  installed new router E1200. initially the computer second value as a "guest." OK for two computers, Internet access. Trying to put the second computer on the main network in order to use common printer, but it does not connect.  When I try it says "settings saved on this computer do not match the requirements of the network. Key codes are entered correctly. How can I fix it?

  Oops looks like I got the security type in the wrong and I am now connected to the main network.  printer is still not workin from the second computer but I wil try restarting the computer and the router.

• Problem after installing the driver VGA for HP Pavilion 1212TX g4

  Hello. I just bought a new HP Pavilion 1212TX g4.

  I install Win7 Ultimate Pro in it and no problems found. But after I installed the VGA driver (ATI Catalyst) the problem occurs.

  The error occurring on the screen is something like this: Access Violation (0xc0000005).

  Cannot run multiple applications installed once the error occurs (for example: iTunes, Nokia Suite, Adobe Reader).

  I am looking for the AC VGA driver for HP Pavilion 1212TX g4 but the problem still occurs.

  Please someone help me. I can't use my new laptop

  Thanks in advance

  Herry

  If you have installed the drivers from various sources I start over with a clean install of Windows 7 at this point and use the specific drivers for your model >& drivers starting first with Chipset and AMD graphics card, driver Intel Rapid Storage Technology and all other cases.

• I need to connect the second HDD in Satellite A300-14V

  Hello!

  I'm using A300-14V and now I need to install the second HARD drive. But 2.5 hard drives have different heights from 9.5 mm to 12.5 mm including a right for my Satellite A300? And I'll need to also buy a slide.

  Could someone please clarify that she is and give me the part number?
  Thank you.

  Hello

  Did you check if your laptop is able to manage the second HDD?
  I mean there is a second HARD-drive Bay, but have you checked if there is a connector needed?

  You should check this first before you buy hard drives

• Try to connect the second monitor to LC

  Im trying to run my Optiquest Q7 monitor as a second monitor and try to expand what is on my primary monitor to the Optiquest for the life of me I can't fiugure it out... help please...

  Hello

  ·         What is the brand and model of the computer?

  ·         Do you use the computer laptop or desktop?

  See the article mentioned below and check if that helps

  Understanding multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  See also:

  Solving the multiple monitor problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

• How to set the resolution of the Viewsonic VX2235wm monitor with Pavilion a420n desktop computer?

  1 HP Pavilion A420N

  2 Win XP

  3 Control Panel-> display, does not have the optimal screen resolution, 1680 x 1050 at 60 Hz. The selections available only for a lower resolution without the proportions appropriate for this monitor and the screen image is severely distorted.

  4. installed latest version of the BIOS, video drivers, drivers latest installed monitor, the monitor is a Viewsonic VX2235WM

  Can someone help me out?

  Thank you

  Here are the specifications of your HP a420n desktop and its card mother A7V8X - LA Kamet2-GL6E. The edge VIA Unichrome graphics adapter is old and does not support the extensions on the big screen. 800 x 600, 1024 x 768 and 1280 x 1024 resolutions are more likely that will support the computer, which are all the 4:3 aspect ratios. Based on the above specifications, I would say that after buying and installing a AGP 8 X / 4 X (1.5V) graphics card, your system must manage a 16:10 ratio width / Monitor wide screen without problem.

  Frank

• Connection for external VGA monitor?

  Model: HP ENVY TouchSmart 15-j052nr

  My laptop is not VGA port and I didn't know when I bought this laptop. Can suggest how to connect my laptop to Dell VGA external display? Some forums are saying you can buy USB cable VGA or HDMI VGA cable but the same people are complaining, it doesn't. Can anyone give good information and links to cables or adaptops WORK will BE for sure with this laptop.

  Hello

  HDMI to VGA cable does not work, you need a converter to switch from digital to analog. The following is an example:

  http://www.Jaycar.com.au/productView.asp?ID=AC1638

  Kind regards.

• connection to a VGA monitor or projector with HDMI port

  What kind of hardward should I get connect my computer that only has a HDMI port to a monitor or projector that has a VGA connection?

  Hello

  You need a converter HDMI to VGA such as:

  http://www.Jaycar.com.au/productView.asp?ID=AC1638

  Kind regards.

• Download Photoshop CC to open the second default monitor as CS6

  I'm a Photoshop series recovery plant for a long time.  I am always amazed to see what changes from release to release.

  I happen to have a second monitor, it's a range display and I love LR and PS both open about it.

  LR5 made... PS did CS6. However, PS, CC does not work.  It does not "remember" where the latter was executed as in earlier versions.

  Am I missing a setting somewhere?  I'm as Win7 64 bit if that matters.

  Thank you

  BJBBJB1

  I have just solved this problem on my system!

  It seems to be the result of Photoshop are maximized when you leave it!

  I dragged Photoshop to my monitor chose, that it had not expanded until the edges of the screen and then closed the application. When I opened it the next time he opened on the monitior correct rather than return to the main display screen.

  I then maximized Photoshop and closed, re-opened again and luckily it was always on the right monitor selected. So this time, I do not need to worry about the weather he has maximized or not.

  So, it seems that the initial release of Photoshop in a State not optimized in terms of window is what "blocks" to your chosen monitor?

  It's on a Windows7 Pro system.

  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

  I hope this might solve your problems too!