Connect the Tecra M11 to high fidelity

I have a Tecra M11 which I want to connect to my onkyo AV 7:2 receiver so that I can listen to music through my stereo and watch movies on my TV.
The amplifier has a range of input - RCA, hdmi, vga ports, digital coaxial and optical jacks.

What happens to be the best way to connect the laptop to the receiver to get the best sound and picture quality? Is there an output high definition on the tecra?

For the moment I do not have my hhoked receiver to my TV so I could not test any video output of the laptop via the vga connection. I tried to connect the two using a jack plug 3.5 over phone from the analogue headphones on laptop phono amp output input but does not have all the sounds (I get sound out of headphone jack when I plug in headphones).

Hello

Tecra M11 is a portable laptop professional not multimedia.
As far as I know that the book contains only a monitor VGA (RGB) output port.

I didn t find info on s/pdif user manual and I guess that this laptop doesn't support digital audio output. I think that you can connect to the laptop to stereo by using the headphone jack.
This will help get an audio output to the stereo.

You should not use such cable: [Y Audio splitter | http://www.amazon.com/gp/product/images/B00004Z5CP/ref=dp_image_0?ie=UTF8&n=172282&s=electronics]

Tags: Toshiba

Similar Questions

  • Windows 8 on the TECRA M11 - necessary review models

    I want to Bay upgrade of Windows 8 pre-control for Windows 7 or XP computers and install it on my Tecra M11 - 13 X model. I was wondering if it will work properly - of course, I think especially on drivers?

    Maybe someone has tested Windows 8 on Tecra M11 in windows program to participate and can help me?

    I'll be very grateful for any answer!

    I put t see serious reasons why win 8 should not work on the Tecra M11

    But since Win 8 is not officially on the market (it takes a few days), you will have to wait for some customers and drivers of Toshiba

  • Why the Tecra M11 - 11 M got only the 32-bit version of Windows 7?

    Why the Tecra M11 - 11 M has only the 32-bit version of windows 7 and 64-bit?

    Surely the i7 and 4 gb can deal with applications and the 64-bit version would allow a more efficient use of computing power.

    Thank you very much

    Hello

    You can try the 64-bit Vista for Windows 7 64-bit driver, most of them must be compatible. I don't know why Win 7 64 bit drivers are not available, there is a user forum and nobody can answer you, I guess.

    welcome them

  • By using the Tecra M11 - 11J with an Express Port Replicator II

    Currently, I have the Tecra on a cooling rack, but I think to buy an Express Port Replicator II.

    The question is: the duplicator will dissipate heat from the laptop. It would be useful in this regard?

    I would be happy to comment.

    What about John

    Hi John

    I agree with Akuma. Port replicator doesn t have the vents inside and you can't wait until the laptop temperature will be reduced because of the port replicator.
    The reasons why the port replicator is are different and, in general, has nothing to do with the computer laptop cooling.

  • Decommissioning of Win7 to WinXP on the Tecra M11 - 11J

    Hello!

    I'm a first time user of any type of portable computer so be gentle please!

    Good; I want to downgrade the installed copy of windows 7 to windows xp that is on the product recovery disc came with the laptop. I have already created recovery disks so that I can return to windows 7 in the future, I understand, but what I'm not is: -.

    What I do on all the other software included with the computer. Have the ability to copy this software (other than windows7) to another drive if I replace win7 with winxp and how should I use to achieve this?

    I glanced at the (windows xp) product recovery disc to see if 'other' software was also included, but was not.

    What about John

    Hello

    Google says that your laptop belongs to the series of PTME0E, all divers are utility are available on the [European Toshiba driver Page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
    http://img841.imageshack.us/img841/3032/windriv.jpg
    So, as you can see, you can install. Perhaps, you will need to integrate Sata drivers to install or change the AHCI mode on, compatible, in the BIOS

    Don't forget to back up important data before proceeding, as it will wipe

  • Tecra M11 has a trap door for access to the hard drive?

    Can someone tell me if the Tecra M11 is equipped with a door to provide access to the hard drive?

    Previous Tecras have such a door, but I can't say for some photos of the site Web or the M11 manual if this still applies. I need to know before ordering.

    Thanks in advance for any help.

    Hello

    I put t know what you mean exactly. hatch giving access to the disk hard but the notebooks THAT HDD is placed at the bottom of the unit.
    You can easily remove the cover that secures the HARD drive Bay to get access to the internal HARD drive

    Welcome them

  • What is the difference between Tecra M11-h-13 and M11 - 10F?

    Hello

    Looking at the web page of Toshiba, I can't tell the difference between the Tecras M11-h-13 and M11 - 10F (besides the ~ 200 euros of cost difference).
    Can someone please enlight me? I see that there is a difference in the wireless card intel, but this difference is too small to allow an increase of 200 euros in the price.

    Thanks in advance,
    Nuno Lopes

    As I see the only difference is probably available 3G antenna. Tecra M11-h-13 has 3G antenna inside and Tecra M11 - 10F comes without 3G.

  • Tecra M11-103 - no sound on TV with HDMI

    Hello world
    I really need your help,

    Until today, that I used a mini adapter displayport to HDMI to connect my Tecra M11-103 to the TV while doing something today that happened and all of a sudden, I got video with no sound on the tv when I tried to unplug the device and plug it in again, he would show at all and would not recognize the tv in the future...

    Now when I go to the windows Mobility Center when the cable is conneceted as usual, I predd on connect monitor, it behaves as if there is an external display, but on the display when trying to identify the motiors example I plugged under the option double screen.
    so he recognizes my laptop as external screen and the pc monitor...
    Way the easiest would be to display an image on the screen of what I see, but I can't do it here...

    Anyway all of a sudden he tells me it's a vga connection, regardless of wethear or not theres even a cable connected...
    I need to recover my back... mini display port where I can c what happened if its damaged or something please Ive spent hours trying to sort and nothing works... it isn't the TV for sure...
    I run windows 7 pro 64 bit and I tried to restore the operating system...

    thnx
    Etty

    Hello

    Generally the connection to the TV shouldn't be very difficult.
    Must connect two devices with a compatible cable, and then you have to go to the external video output using the FN + F5 key combination.

    In addition, you can check the sound settings in the control panel-> sound-> the Read tab.
    Here, you choose a digital output (hdmi) as default setting.

    My other idea is that something could be wrong with the display driver.
    Try to reinstall the graphics driver and check if it helps.

    It s worth also set the BIOS to the default settings, I doubt that the BIOS could be the problem here, but it of certainly worth a try...

  • Re: Tecra M11: how to enable S/PDIF audio output?

    As says the topic, how can I enable output audio S/PDIF on the Tecra M11?
    And what the HD Audio port turns off?

    The RealTek HD Audio driver is installed but there seems to be no way to configure it using the bits of the Web from Toshiba site?
    Have I downloaded and installed the package of pilot/bad since the support download section?

    In the Control Panel audio volume control (Volume Wave/main/SW Synth / CD Player), there is no sign for S/PDIF. It is normally visible on the systems on which it presents and activated. I need to download the RealTek drivers and ignore the drivers of Toshiba?

    (Yes, I have a system to connect to who accepts this type of signal)

    Which Tecra M11 do you have exactly?
    Can you please send model number?

    Check it please this document > http://aps2.toshiba-tro.de/kb0/TSD57013M000UR01.htm

  • Tecra M11 - 11J - cannot install Windows 7 64 bit

    Tried to upgrade a Tecra M11 - 11J for Windows 7 64-bit.
    The installation gets all the "Loading Windows files" screen, then turns off and freezes, with the release of maxing out CPU fan but no HARD disk activity.

    Have tried to reinstall XP (works fine), flashing the BIOS to the latest version, re-seats of the RAM, change the HARD drive in "Compatibility" mode and reinstall Win 7 - same problem.

    Have you tried Win 7 32 bit - the same problem.
    Installation of USB, instead of DVD - same problem.
    Different flavors of Win 7 - same problem!

    It's extremely frustrating.
    I upgraded the memory up to 8 GB, hoping to take advantage of this with W7x64 and now I'm stuck with a XP machine and 4 GB of of of the RAM to lose.

    Would be very grateful for any suggestion.

    Thank you.

    and installation of Win 7 does not even using the old 4 GB of RAM?

    Or have you tried to install Windows 7 on the Tecra M11 using the new 8 GB of RAM?

    What of the HARD drive? The HARD drive is displayed on the first page of the BIOS?

  • Power On problems with Tecra M11 - 10Z

    We have problems with our Tecras.
    When they are used in the field, the problem is the same on 75 machines and they cannot be turned on at all.

    It is sometimes useful to remove the battery, sometimes it it dosent and the laptop cannot turn on the next two days, and then it works well again until it does it again...

    How can it be, its starting to be a very big problem...

    We have tried to turn off the TPM and they perform the update to the newest bios, they are all running windows 7 pro 32-bit...

    I hope this is enough information because my English is not that great, and I hope that someone has solved this problem...

    Hello

    I noticed that the new BIOS has been released for the Tecra M11 series.
    Try to update the BIOS and check if it could enhance the functionality of s for laptop.

    Good luck

  • Tecra M11 - Intermittend gel and clicking HARD drive

    I used my new Tecra M11 for about a month. I'm starting to find occasionally freezes, each lasts about five seconds. The mouse stops and I just need to wait until he comes back.

    Now, for these last days, I had occasionally accompanied by a strong clicking freeze on that seems to come from the hard drive. Everything stops as usual, including the mouse, and the player makes about eight strong clicks. The noise seems to come from the back left side, which is where I assume that the hard drive is located.

    So, is this a new drive hard reconfiguring itself and bedding in, or is it dying? The original gel, I tabled in the software, but now clicks began, I'm not sure.

    Jason

    Hey,.

    On the left side of the Tecra M11 is the HARD drive as you have already said, and if the HARD drive is causing these rattling it appears to be a malfunction of the HARD drive. That s no reconfiguration of the HARD drive to backup so all important data on another drive.

    The HARD disk should be replaced as quickly as possible. If your Tecra M11 is only one month it of still under warranty and this Exchange is free for you. Simply contact a service provider allowed in your country and explain the situation. Guys are going to order a new HARD drive and swap it. :)

  • Tecra M11 - Player cards and corrupted images

    When I put an xD card in the front slot of the Tecra M11, the images it downloads are corrupt. When downloading via an external drive of XD (for example the camera itself) the images are okay. Here is an example of a corrupt image:
    http://www.Flickr.com/photos/jasonjudge/5816195077/in/set-72157604215066892

    Here's the same image downloaded from the camera via USB:
    http://www.Flickr.com/photos/jasonjudge/5856376812/in/set-72157626887798337

    Is this a driver issue Windows 7 (32 bit) (I can't find any updated driver in the website of terrible driver taking me to the bottom of many dead ends) or would it be a hardware problem?

    Jason
    PS what is on this forum who keeps throwing my cursor in the subject box as I am typing in the message field?

    Hey,.

    What xD cards you use exactly and you have tested different cards?
    The same thing happens if you use a SD or SDHC card for example?

    Toshiba page is very easy to find driver updates. Have a look here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    There is a newer version for Windows 7 32 bit so I would recommend the card reader driver update.

  • Tecra M11 - 17V - identify the serial port on the docking station

    I have a laptop Toshiba Tecra M11 - 17V, which I often use with the docking station that accompanies it.
    There is a DB9 serial port at the back of the docking station, but I don't know what COM Port.

    I use Windows 7.

    In the device, COM9 Manager - COM22 are identified as Port BT (bluetooth). Com7 - COM8 are RIM Virtual Serial Port v2, COM17 is Prolific USB-to-Serial Comm Port and COM18 is USB-Serial CH340.

    I thought that COM17 or COM18 were the most likely candidates, but have not been able to get to answer using one of them.

    I connect a Psion 5 (Comms app) to him and have developed ports and the Psion 8bits, 19200 baud, no parity, 1 stop bit.

    Hello

    > There is a serial port DB9 on the back of the docking station, but I don't know what COM Port, it is

    I think you have misunderstood something wrong
    COM ports in Device Manager are virtual com ports
    There is no link between a serial port and a virtual com port.

    I have a question: what docking station you have exactly?

    I had an express port replicator and this device required an additional serial port driver installation.

  • Re: Tecra M11 sudennly freezes and the cooling fan starts to run

    My Tecra M11 laptop is running Windows7 and with a broadband dongle Telstra wireless internet lights up and works normally for a period of time.

    Sudennly it freezes completely and 5 seconds later the cooling fan starts to run until I power off using the power button.
    Clues?
    Thank you

    You must understand that on this virtual path, it is not easy to say what the problem is here.
    I can imagine that some background process starts and increase the use of the CPU at the critical level when the motherboard sensors register at higher temperature of the processor and cooling fan starts to run fast enough.

    Try to check in the Task Manager, if something like that happen.

    I put t know how you have configured your operating system and to applications that run in the background, but also to try to stop treatments that you don't need and change some settings.

Maybe you are looking for

  • Cannot open google

    whenever I try to open google, you will see a secure connection failed error message. I tried to open google in safe mode, I tried to disable the modules, turn off hardware acceleration, updated and to switch to the default theme, I can not even open

  • Disable the button Wireless Laser Mouse PA3706E Alt + Tab?

    I have what I think, it's a mouse Toshiba PA3706E (it's the one in the picture below) It has a small button of Alt + Tab at the worst place in the fact that it could be, and I was wondering if anyone knows a way to disable? I installed the thing that

  • Re: Satellite L50-B05D cannot load Win 8.1 - not found boot device

    Hello I have a C50-B05D Satellite and I recently downloaded the bios update and I applied it to my system. When I did it said it contained the update already. Having been on the laptop for a while, I closed the lid and it turnt. When I turnt back on

  • Display: convert all (of hundreds) of "view as an icon.

    How can I reduce all the icons in my schematic view of the smallest representation-that is to say the property disable "display as icon" without selecting each individually? Nest of puffiness someone sprawling 6 by 6 feet of son...

  • My file began to just show the share icon in the lower left corner. How can I remove it?

    There is a small box with 2 heads in the lower left corner of all my icons, photos, docs, exc. HELP? There is a small box with 2 heads in the lower left corner of all my icons, photos, docs, exc. HELP?http://ImageShack.us/photo/my-images/703/desktopV