connect the telephone line only to send a fax

I just got my HP8600 and want to know if I can connect my phone line only when I want to send a fax?  I've never had the opportunity to receive a fax and so would deal with the connection of the phone only when I need to send a.

Hello

Yes, you can do it this way, if you wish. Please use the following manual to implement in your country:

http://h10032.www1.HP.com/CTG/manual/c03045013.PDF

Kind regards.

Tags: HP Printers

Similar Questions

  • Whenever I try to send a fax, I get error "no dial tone was detected. The telephone line is busy or not connected to the computer. »

    Whenever I try to send a fax, I get: "no dial tone was detected. The telephone line is busy or not connected to the computer. "Any ideas?

    You can't send a FAX via a connection to broadband. Fax is essentially specialized phones and requires that a service composition is used at BOTH ends.

    You can buy an analogue Fax/modem (USB types work well enough) or use a service to convert fax email...

  • Fax HP Photosmart C410 connects to the telephone line at home instead of the dedicated fax number

    I have a Photosmart C410a.  The machine must be connected to the dedicated fax line, and number of this line was introduced in the fax header.  However, when tested using the FaxBack Service, fax back called the conduct of the House instead of connected to the fax line.  The machine is connected directly to the wall and there is no dispatcher, etc., with the home phone.  The telephone number doesn't have to all be typed them into the C410a.  Any thoughts you may have on what might be happening would be greatly appreciated.

    Best,

    Scott

    RESOLVED: The problem has been an error with the FaxBack service - my camera was working normally.  The best way to test your machine is either send/receive a fax with a friend or with HP customer support.

  • Fax test failed. No dial tone detected. Printer is connected directly to the telephone line.

    I am unable to connect the fax. Connection what ever I use the tone was not detected in spite that I heard tone.

    Help, please.

    I'm sorry you have a problem with the printer.

    Perform a hard reset on the printer. Unplug the power cord at the back. Leave for 30 seconds and plug it back.

    Also check the end of the telephone cord. See if it's a 2 sons (aluminium piece.

  • Enter the selected line only an editable af:table ADF

    Hello

    We have an obligation to engage only the selected lines in a table. All lines in the table must be modifiable. There should be a 'Save' button in a column that has to save the selected line when you click it.

    Could you please share your comments/suggestions.

    Environment:

    JDeveloper and ADF 11.1.1.7

    Thank you

    Srikanth

    Maybe you can add the attribute transitional to EO as an indicator whether the line should be validated in db or not, override EOImpl.doDML () and skip super.doDML () If this attribute is not set.

    Dario

  • JavaScript to extract the second line only a field of text as a PDF?  Is this possible?

    I have a PDF form created in Acrobat DC.  One of the fields is a for the name and address multi line text field.  The user between that info with carriage returns in a field named the plaintiff that ends in a format such as:

    Name

    Mailing address

    City, State Zip

    I need to extract JUST the second line of this field to complete another field of text with these data.  So, my second text field called StreetAddress and would automatically extract only the second input line in the text field named candidate.

    Is it still possible?  If so, can someone give me an example of how this can be accomplished?  I don't want to ask the applicant to each line of input in separate fields.

    Of course, it is possible. Use this code as the "StreetAddress": custom calculation script

    var fullAddress = this.getField("Applicant").valueAsString;
    var lines = fullAddress.split("\r");
    if (lines.length>1) event.value = lines[1];
    else event.value = "";
    
  • Transfer outside the telephone line to another user of domain?

    I have a user (user A) who must transfer an overview on his phone to another phone user (user B).  On the phone from user B, I changed the outside line in the mask of Destination AAR and external phone number mask in Call Manager Administration.  Also does the same on the user of A phone.  It does not work.  Offline rang again on the extension of the user and not on user B.  Went to the switch and changed ports as well, always the outside line still rang on the extension of the user and not on the extension of user B.

    Information for users in administration unit call manager has also been changed to reflect the changes.  The issue has not changed.  Is there another place to have the outside phone line and more changed where I changed it already?

    The version of Cisco Unified Call Manager Administration is 7.1.5.32900.2

    The phones in question are 7940's

    Any information anyone can provide will be extremely useful!

    Thank you

    John Gorski

    Milton school district

    Milton Wisconsin

    Simply create a translation model then to change the number called to your desired destination.

    Chris

  • Update of the Page choose the first line only

    Hello

    I created SearchPG and from there I click on the UpdatePencil and regardless of which line is clicked, I always get the first line of the table of search results.

    Please notify.

    Thank you!

    Hey,.

    Please get your hands on the original Version and run the query in providing parameters of the basic page.

    If you use EO, implement the code in AM or you can add the code to the CO of the UpdatePage.

    I hope this helps.

    Thank you
    Rakesh

  • Connection to the telephone line with Logitech Vid

    I am trying to connect with a phone camera Logitech Vid, the recipient receives a msg I'm busy and a firewall will not let his call to come through, my firewall is disabled, what can that do?

    It wasn't a problem of Logitech, it was a problem with Windows Firewall, it was blocking the connection. But thanks anyway.

  • BlackBerry Smartphones beep sound during voice communication... it is impossible to have a converse on the telephone line

    I noticed that the sound signal come on when the BB is trying to access the data service. While on the phone, the beep is very clear and when it rings, it cuts the voice communication, it is impossible to hear the other party. Sometimes, there is a continuous beep that a last minute or more and making the "BOLD" BB a useless phone device. How can I turn off the beep? Or is it possible that turn off the data service when voice communication is established? There are only three choices in the menu, on, off and off data roaming service.

    BTW, what is the symbol of the notification at the top with the yellow globe sign and number 1 means? The handset is waiting for a response from the Web service? How do you know what it does and how to make it go away?

    I am disappointed to find this forum is the chanel ONLY to ask advice and solution. It's very strange, that there is no common support email.

    Hey jadi, the yellow globe and a '1' beside her looks like a notification from the browser that it has lost its connection.  If you look in your messages folder there message with the link to your web page.

    insofar as the sound signal, try looking at your profile on the BB settings.  There is an option at the bottom of each article to warn that says "warn me then appeals".  check and change to 'no' if it is 'yes '.  to this success the menu (button left of the Pearl) and go to your profile icon that looks like a speaker with waves coming out of it to the right.  There, he'll tell which profile is active.  It will probably be the "normal" profile if you hearing other tones and ringtone.  Go to the bottom of the screen, then select "Advanced".  Once there in there click on the items in there and check to see if this option to 'Notify me during calls' is set to 'yes '.  If so change to 'no '.  see if that will set the tone.  It will be useful.

    There are other forums looking for answers as well, but is supported directly by RIM/Blackberry and most often used. I used blackberryforums.com, but I always come back to this (supportforums.blackberry.com), which for me is the best option.  CrackBerry.com is another.

  • How can I disable the confirmation printed when I send a fax?

    HI Forum,

    I have a HP7525 printer all in one, and every time send us a fax it prints a confirmation page. Is it possible to disable this feature?

    If anyone can help I would really appreciate it.

    Thank you!

    Hello poppynguyen,

    Take a look at page 37 and 38 about these settings, your user's Guide.  Please let me know if this helps solve your problem.

    Good luck!

  • EA6200 care about my phone line when it is connected to the dsl line

    Why the EA6200 router cause my phone line to busy out when I try to connect my ADSL line in the router? My Netgear is working with the same configuration. Do I need an extra modem? If the NetGear router is a modem/router and the Linksys is not?

    Thank you

    Yes, I hope that you don't damage the EA6200 connect the telephone line. Probably not well.

  • Can someone do in your network by using only the phone lines?

    Hello

    so I get calls from 'Windows' weekly.
    The team of 'windows' wants to help solve the computers...

    Crooks, of course, but they keep calling me.

    Y does it have that in any way the security of the network is compromised PURELY through the use of telephone landlines?

    Is there a way to "trap"? For example, giving the command remotely to a computer (trap) the property of Microsoft or the FBI or... ? I bet that someone wants to catch them? I wouldn't mind redirecting their...
    If they keep the call, he must mean the scam work and the people in the fall.

    If the telephone line does not connect to your computer, then no..  If your computer has a modem and the telephone line is connected to it, then yes there are ways they could fool you or how misconfigure your computer allowing them full access.

  • Color Laserjet Pro M277dw: m277dw disable fax to answer telephone line or the value

    I just bought this printer and I want to implement for the fax does not at all meet the telephone line.  I want to put in place and I must therefore send and receive some manually.  At least put in the response to number of rings to 8 or 9.

    Thank you for any response

    Hi davidsklar,

    You are welcome!

    If you found my post useful, please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

    Best regards!

    "Please click the Thumbs up icon below to thank me for having responded."

  • How to connect EA6500 to the phone line, but with no modem

    Hi all

    I just bought an ea6500 to replace my old router billion and up to now all I had to do is plug my phone line directly into the port ' phone line in "on the back of the router billion.

    But according to me, there is no "phone line in" port on the ea6500, I don't use a modem and have used the router billion in itself for the past 6 years, is it possible to connect my telephone line directly on the ea6500 somehow, ideas appreciated?

    My research indicates so far you can do via a ' Ethernet / phone line adapter "because they are incompatible, in any case.

    Installation guide appears if wait to a Modem is being used, but in my case it was not and I think that a router must perform the basic functions of a modem anyway?

    What concerns me is that if I really need to buy a modem, then this is potentially 'Butterfly' the features of the ea6500 which is the reason why I bought it in the first place?

    If I need to buy a modem to get my work ea6500 so what specifications should I look for?

    confused the new customer... Thank you

    I just checked the online billion router and discovered that it is actually an ADSL router, so it has an ADSL port at the back that the EA6500 do not have. I suggest that you ask your Internet provider if they provide or provide you with a DSL modem, you can install the EA6500 router properly. In addition, the EA6500 is a simple band and dual gigabit router that works behind a modem cable or DSL internet connection.

    Get to know the router Linksys Smart Wi - Fi, EA6500

    Linksys router Smart Wi - Fi, EA6500 frequently asked questions

Maybe you are looking for