Connect the TV (with sound) and monitor for Optiplex 390
Here is my system info:
OptiPlex 390 small footprint
Windows 7 64 bit
Intel Chipset H61
Intel HD 2000 (with HDMI and VGA) graphics card
Map of AMD Radeon 6350 512 MB video (with 2 DVI splitter)
I need to connect 1) HD TV with the sound via HDMI and 2) monitor via VGA to this system (no sound). I did a lot of research on the Internet but can't find a definitive answer if my system will support both views. Can anyone confirm if one of the three options below does not work, or any other ideas?
Option 1: remove AMD card, connect the HDMI TV, connect the VGA monitor. I've seen conflicting information if the HDMI and VGA ports can be connected at the same time.
Option 2: Connect TV: dispatcher--> DVI HDMI adapter DVI-->--> TV, monitor connect a HDMI cable: dispatcher DVI DVI VGA adapter--> monitor-->. It should work, but if someone can confirm if the AMD Radeon 6350 supports audio through DVI to TV?
3rd possibility: buy another video with HDMI and VGA card. I'd rather not spend more money... I have six systems to connect!
Thank you in advance for your help!
Hi Ozone72,
Intel HD Graphics 2000 which was shipped with OptiPlex 390 supports two independent screens. Which means that you can connect TV for VGA and HDMI monitor, so that AMD card must be removed from the computer.
Please try it and return back if it worked.
Tags: Dell Desktop
Similar Questions
-
Hi, how do I change the orientation of the page with headers and footers for facing pages
Hello
How to change the orientation of the page with headers and footers for facing pages in CS5
Turning the page is only for the formatting of data - the page is not literally transformed for printing.
In most print even if the pages of a book are enabled for the landscape, the header and the footer are still in the same position.
If you need pages in landscape mode with headers and footers in a different location - you need to do these pages in the section "Master Pages" of the Pages panel
Then apply these new Master Pages to the pages in your document.
http://helpx.Adobe.com/InDesign/using/master-pages.html
Note - it is not usual to have a different orientation for the headers and footers.
-
Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.
Greetings Dani56777,
Thank you for using communities Support from Apple!
I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.
If you need information on how to update iTunes, please follow the instructions in the following link.
Download the latest version of iTunes for Windows - Apple Support
If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.
Remove iTunes Control Panel and its associated components
Use the control panel to uninstall iTunes and software components in the following order:
- iTunes
- Apple Software Update
- Apple Mobile Device Support
- Hello
- Apple Application Support 32-bit
- Apple Application Support 64-bit
On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.
Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.
Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components
Have a great day!
-
If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages by using Outlook.
See this article.
http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox -
I can ONLY connect to the internet with IE7 and Outlook Express
I have Win XP SP3, home wired network, Netgear router, cable internet, Lenovo desktop.
I can run IE 7 and Outlook Express and connect to the internet very well with these. However, I can not connect using FireFox. Windows Update returns an error and does NOT connect to scan my computer and display the necessary updates. I just installed tax program this year HR CD block and it is unable to connect to internet to download the updates. I used IE7 to go to the web site of the tax program to download the update manually, but it doesn't connect either. I also can't complete installation OF Adobe (Digital Editions) program because it must connect to the internet in order to make a registration.I have disabled the Windows Firewall, do not have a configured proxy. So, I can browse the internet with IE7 and get email with Outlook express. I went on the site from Google Chrome to try to download it and install it that (using IE7 of course), but after I press the "Download" button, IE7 says that it cannot connect to perform the download.
I scanned this forum and not seen similar symptoms that would allow me to reach a solution. Everyone knows about this issue and how to resolve?
P.S. I have two other laptops Win XP which CAN completely connect to internet with IE and Firefox via the same router and the modem cable.
I tried trojan remover and none of the things in the menu utils found any problems.
But it turns out that my problem was a hidden/partial copy of Symantec Client Firewall that I thought was deleted. Over the months some programs had been updated and Symantec didn't know about them, so it was blocking their access: FROM Adobe, HR Block, IE8, Firefox, etc. Given that I have not seen it listed in the start menu and it was not listed in Add/Remove Programs, I didn't have to try to remove it. And it was not poping up to tell me of a new program attempts to access the Internet.
I used the Symantec tool to remove all THE stuff of Symantec and it cleared up my connection problems. I then reinstalled Symantec Client Security (antivirus and firewall) and turned off the Windows Firewall.
-
Have a HD Sony Wega KDF E60A20 TV that loses sound and image for a bout a minute then comes o
Have a HD Sony Wega KDF E60A20 TV that loses the sound and picture for a bout a minute then light up again.
I'm sorry to hear what is happening with your TV. I need more information about the problem you are having with the unit. When the TV loses sound and the image is there any light that flashes on the control panel of your TV (e.g. lamp, timer or power)? What is the video source connected to the TV?
Follow the steps below to troubleshoot the TV.
A power reset.
1 turn off the TV.
2. unplug the power cord of the TV from the power outlet.
3. let the TV remain without power for 60 seconds.
4 plug the power cord into the power outlet.
5. turn on the TV.If the problem persists, try to pull up the TV menu when the sound and the image is lost, just press the Wega door button on the supplied remote control. See the menu? Note If there is no light, which will blink on the Panel of the TV when the problem occurs.
If my post answered your question, please mark it as an "accepted Solution".
-
Watch free downloads for patterns of sounds and themes for Windows Vista.
Original title: watch free downloads for windows vista 32 bit...
looking for sound patterns and themes... * address email is removed from the privacy *
Hi Valerie,
Since you want more patterns of sounds and themes, we can refer to the links and check if that helps.
Themes and templates of built-in sounds are available for Windows Vista.
Change the sounds of the computer
For more information, see the article:
However, you can also use your favorite search engine to find free downloads of third party for the patterns of sounds and themes.
Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope the helps of information.
Let us know if you need help with Windows related issues. We will be happy to help you.
-
BlackBerry Q5 can I put the phone both vibrate and ring for an incoming call?
I put the phone both vibrate and ring for an incoming call?
Yes, you can.
On your home screen, slide to the bottom of the top, and then select settings > Notifications > Applications > phone. You can then set to vibrate while sounding, and you can select which ringtone you want to use.
In another of your discussions, you asked how to set a ringtone for a specific contact. What I have described here will set the default ringtone for all callers, but those that you set up with the specific notifications.
See you soon.
-
Where to put the report server ip and port for the Siebel server?
Hello
Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.
Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.
Please help, thanks.
Hello
Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.
Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.
Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.
I hope this helps.
Thank you
Maria -
Original title: color monitor
I have the HP envy window8 and monitor AOC 22 "Led. I can't get all the colors on the screen. The colors are bright that I receive, but can't get the yellow, green, purple. etc. I followed in the Help menu for calibration of the colors without success by the buttons on the monitor in windows.
Hi Ellen,.
(a) you use HP ENVY laptop or desktop computer?
(b) what is the model number for HP ENVY and monitor AOC?
(c) what kind of connector do you use to connect the monitor?
(d) have you tried to use the other cable and check if works?
You may experience this problem if the connections between your computer and your monitor is loose or if the drivers of graphics cards is corrupted. Try these methods and check if that helps:
Method 1: I suggest you to update the latest drivers for the graphics card for Windows 8 and check if it helps:
http://WWW8.HP.com/in/en/support-search.HTML?tab=1#/qryterm=HP%20envy&SearchType=s-002
Method 2: Visit the COA Web site and install the latest drivers by selecting the drivers of the AOC monitor for your model and see if it helps:
http://www.aocindia.com/service_manual_monitor.php
See the documentation for your monitor and see if you can find the menu to restore default settings. If the problem persists I suggest you to contact the manufacturer (AOC) for assistance.
Also refer to this article: get the best display on your monitor
http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor
Hope this helps, if you need help on Windows let us know we will be happy to help you.
-
Change the problem of direction of the cursor with new 2nd monitor
original title: problem of direction of the cursor with new 2nd monitor
I just added a 2nd monitor to my computer. The 2nd monitor is left of my laptop but I have to move the cursor to the right in order to get on the new monitor. How can I change so I can just move my cursor to the left and get it on my new 2nd monitor?
Right-click on the desktop and then clicking display settings by clicking Customize to open the display settings. In the display settings box, click and drag the image to the monitor 2 to the left of the screen 1. Click on the button apply, then check. Click Ok to exit.
-
Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.
Yes, individual licenses, ranging up to allow two simultaneous, activations facilities.
subscriptions allow mounting on an unlimited number of computers. connection is limited to a maximum of two computers at a time.
-
Looking for adobe certified companies that can create a web site of muse with java and PHP for me
Looking for adobe certified companies that can create a web site of muse with java and PHP for me
Relationship problems he...
1: nothing like the Adobe Certified companies
2: sites of Muse do no PHP support.
-
Unable to display the results of a detailed report or the results of a questionnaire in a bed within the project. I checked the preferences of quiz and enabled for the draft declaration. I use SCORM 1.2. My LMS is not listed (MCN) and so I chose 'other LMS standard. Any ideas on why I see the results?
Publish your SCORM SCORM Cloud and test if it will show you the results you want. If so, then your problem is with your LMS. If this is not your problem may be due to something in the settings of your current project. Eliminate one thing at a time.
-
Select the emp with a maximum salary for each hr.emp manager_id
Hello
Can someone help me to do this without doing any partitioning or analytical f:
Select the emp with a maximum salary for each hr.emp manager_id.
HR. EMPLOYEES Table Description: =.
EMPLOYEE_ID
FIRST NAME
LAST_NAME
HIRE_DATE
JOB_ID
SALARY
COMMISSION_PCT
MANAGER_ID
DEPARTMENT_ID
TX, all the guys
MarioHi, Mario,.
Here's one way:
SELECT * FROM hr.employees WHERE (manager_id, salary) IN ( SELECT manager_id , MAX (salary) FROM hr.employees GROUP BY manager_id ) ;
mario17 wrote: Hi,
Can someone help me to do this without doing any partitioning or analytical f:Do you mean analytical functions?
Why you don't want to use the analytical functions? Analytical functions, permitting the simpler, more robust and more effective to achieve these results, wouldn't you want that?
Maybe you are looking for
-
Satellite L875D - ODD does not recognize CD
I have problems with my internal DVD player.If I insert a cd, cd run and run and run but want to start.I had install all the systemdrivers and all the other drivers from this link: http://www.Toshiba.de/innovation/JSP...6007GR&error=0 In the Bios it
-
How should I do to add or create a format of custom paper in the list of paper sizes. I need to add a 200mmx300mm without borders I have two printers Photosmart prem c310a Photosmart 7960 and neither show the size of paper. I am running Windows 7 64
-
NI USB - 6259 BNC DAQ: analog input signal cross on the question
Hello I use the NI USB-6259 BNC DAQ unit to acquire a four-channel analog signal, and I'm having a problem with a signal that affect others. The circuit, I am running is: I have a wire connected to a battery (two AA batteries at ~1.5V), which then fe
-
Hello, I bought 2 Sansa e260 player of Tiger Direct in January. One as one gift, one for my son. We work very well, but the other will not charge. I now have the element of return. Since he ordered last January, was referred by Tiger to Sansa suppor
-
BlackBerry smartphones can not get one of the apps running
All my installed applications are there, but there is no "RUN" button as it was before. He just installed on the app They were working. I don't know what happened. Any help?