Connect to a device using TELNET
Hi all
I'm again using LabVIEW afairly... I have only the subset of basic skills so far. So I would respectfully when you reply to a catchall as possible please. In fact, a sample project with a lot of explanation would be absolutely fantastic.
Essentially, I have a Kollmorgan AKD motor controller device (more precisely the model AKD - 00306-x) which controls a servo controller. It uses the TELNET Protocol, among other things, to communicate with him. So far, I was able to use the TELNET of MS and Kollmorgans workbench service to communicate with the device with great success. Although the workshop of Kollmorgan is a good program, I am looking for more precise control.
Here's the question:
What is the best method of sending the commands mulitple like that of the TELNET Protocol (to where I can enter a command, have the Kollmorgan run, enter another command, run,... multiple iterations this... with out disconnecting)? In other words, I want to be able to enter a few commands, one at a time, and the Kollmorgan executes each command after each time that the key has been affected (with them having to restart the application... because of the disconnection). So far, I've implemented a while loop (without success) and one for the loops (with no success).
With the involvement of a loop, I can send a command and carry out very well... the connection becomes just disturbed/disconnected. My working model of the program, out of the loop is attached. You will find that it does what an execution (using the "run once"). If you use the button "Continuous run", the buffer is literally invaded (which probably you know).
Thanks in advance.
You have 2 problems:
- Do not connect a value to the N of a loop terminal for and auto-index at the same time. One or the other. In your case, you're automatic indexing. Remove the 9 constant.
- Your strings are not correct. If you want to enter special characters such as newline and carriage returns, your string must be in '-' display mode. Otherwise get them interpreted exactly as you enter them. You send your channel, then the character "-" and the character "n". This is not the same thing as the newline character. Right-click on the string element, and then select this mode on the shortcut menu. You will see there are two characters "\" before the "n" and the characters 'r '. Change all the double-backslashes to those unique.
Tags: NI Software
Similar Questions
-
Push the connection interrupted by device - using eclipse of the bb Simulator
Using BlackBerry plugin for Eclipse
For OS 6
After taking two weeks to try and correct an error "not close until you have finished" simple with SQLite, I now have a bit of a configuration issue with the Eclipse software.
When I push a message to the Simulator, I get the following error.
<2012-04-18 15:39:15.471 EDT>:[378]:
: : http://172.17.111.35:[email protected]&priority=2&besurl=192.168.1... pushId = -62be8811:136c6f71d73:-7ff576188, destination = [email protected], result code = 400 net.rim.protocol.iplayer.push.b: Push connection aborted by device> According to the knowledge base, a 400 error is 'invalid Push to the format.
Mobile data service 3.7 and earlier versions: the email address or the personal identification number (PIN) used in the Push was not recognized as a user of BlackBerry Enterprise Server enabled for Mobile Data Service. »
I'm sure it's something with the configuration in the rim.property file. Something probably must be on or off, I can't understand.
[MonitorAgent] MonitorAgent.listen.port=8070 [WebServer] WebServer.Tomcat.transcoding= false WebServer.listen.host=localhost WebServer.listen.port=8080 WebServer.listen.sslport=8443 WebServer.servlet.monitor.port=8070 WebServer.servlet.monitor.host=localhost WebServer.servlet.push.port=81 WebServer.servlet.push.host=localhost WebServer.servlet.push.ssl=false [SRP] SRP.UID= please get one SRP.AuthenticationString= Please get one SRP.InetAddress= Please get one SRP.Port=3101 SRP.logging=true [IPPP] IPPP.push.listen.tcp.port=81 IPPP.connection.MaxNumberOfKBytesToSend=128 IPPP.queue.flowcontrol.window.size=-1 IPPP.queue.flowcontrol.timeout=600000 IPPP.logging=true [UDP] UDP.receive.port=19781 UDP.send.default=19780 UDP.init=initialization_packet UDP.logging=true [HTTP HANDLER] application.handler.http.logging = true application.handler.http.CookieSupport = true application.handler.http.AuthenticationSupport = true application.handler.http.AuthenticationTimeout = 3600000 application.handler.http.device.connection.timeout = 140000 application.handler.http.server.connection.timeout = 150000 application.handler.http.device.credentialTimeout = 60000 application.handler.http.authentication.mechName2oid = Negotiate=1.2.840.113554.1.2.2, NTLM=1.3.6.1.4.1.311.2.2.10, Basic=1.3.6.1.4.1.88888.1.2 [Security] net.rim.security.auth.DefaultDomain = rim.net [HTTPS HANDLER] application.handler.https.allowUntrustedServer = false application.handler.https.logging = true [TLS HANDLER] application.handler.tls.allowUntrustedServer = false application.handler.tls.logging = true [OCSP HANDLER] application.handler.ocsp.StatusProviders = net.rim.protocol.iplayer.connection.handler.device.ocsp.OCSPProvider application.handler.StatusProviders.OCSP.PrimaryResponderRank = Default application.handler.StatusProviders.OCSP.Responder.Default = http://dhobbs-wnt.rim.net/ocsp application.handler.StatusProviders.OCSP.UseDeviceResponders = yes application.handler.StatusProviders.OCSP.UseCertResponders = yes application.handler.ocsp.DebugLogging = no [LDAP HANDLER] application.handler.ldap.DEFAULT_SERVER = dhobbs-wnt application.handler.ldap.DEFAULT_PORT = 389 application.handler.ldap.DEFAULT_QUERY = ou=people, o=rim.net application.handler.ldap.DEFAULT_LIMIT = 20 application.handler.ldap.COMPRESSION = true application.handler.ldap.logging = false [Database] Database.shouldConnect=false BESName=DAISY1 Database.Driver=sun.jdbc.odbc.JdbcOdbcDriver Database.URL=jdbc:odbc:BESMgmt Database.DBCycleTimer=5 [ACL] ACL.Authorization.Datastore=net.rim.shared.service.authorization.JDBCAuthorizationDatastore ACL.Enabled=false [ESS] ESS.helpfile = help/Using_the_Email_Server_Simulator.html ESS.launcher = bin/launcher.exe [Email] Email.deviceId =2100000A Email.pop3Server =pop3.server Email.smtpServer =smtp.server Email.personal =Dean Logan Email.address [email protected] Email.smtpPort =25 Email.pop3Port =110
Any suggestions?
Figured it out.
When you set the port of the unit, I had the wrong port
_notify = (StreamConnectionNotifier) Connector.open (appAttributes.devicePort + appAttributes.deviceSide);
My company uses a Test port and a port of Prod, so that we can have 2 versions of the application on the device at the same time. Then, chaning the listening port of 1315 to 1313 authorized service push push to the appropriate port and the app was able to read the data.
-
Satellite P200-1EE - how to connect to the device using Belkin Mini Bluetooth Adapter
Please can someone help with my problem.
I am running Vista sp2 and just bought one of these adapters.
Tried to load the software and I'm having problems.This icon appears in the system tray, but no icon on the desktop.
Now I have 3 other computers running XP and have installed the software without problem.
Belkin has called this afternoon and they recommended their virtual software but this has not solved the problem.
Tried the Broadcom website and download their latest software but still no joy.Without the software, I can't pair devices to the computer, but I can print for my C5380.
Someone had a similar problem?
What is annoying is that they use a Toshiba laptop like the screenshot in the installation guide.Help!
OK, I worked in a solution.
The software cd has a file for windows like vista
The windows folder installs an earlier version of the software, but it works with vista.
The vista software does not.
-
If I deleted my device using find my iphone how can I reconnect? It is easy and can be done? Please tell me ASAP
Do you mean that you have removed your device by using the iCloud.com site?
If yes - you can still register in the website using your Apple ID and password
If you want your device to appear in new iCloud - you must connect to the device using the same Apple ID and password
If this isn't what you are looking for - please provide details or ask a question in your native language (Hindi or Gujarati maan mein)
-
My pro iPad connects to the WIFI, but loses connectivity to drops in use. My other IOS devices (iPhone, macbook, etc.) do not have this problem. Ideas to solve?
Hello BrooklynWM!
I definitely want my iPad to stay connected to the Wi - Fi connection while I use it. Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping. We can try a few things.
Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network
Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported
After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.
Best regards.
-
Connection to multiple devices sequence using FF Fieldbus Foundation open VFD
I am trying to connect to multiple devices on the same bus fieldbus. When I try
to connect using 'FF VFD open' admission that he is VFD tag (I left it as)
by default (0)). I can connect to a device, he questions and close the connection.
However, when I try to do the same with the following equipment, it errors on Open
VFD. The bus, everything seems to be connected correctly, I can query all devices
there and get their various identity papers, so I think it's to communicate all the
right.
I tried to connect using different, unique VFD tags. As I mentioned, I
have tried to disconnect and close the entire connection before trying to
to connect to another unit. I tried to connect to individual units with the
other disconnected from the bus and each will connect and work very well, so I
know that everyone is able to work-just not when other units are also present.Any idea is appreciated.
-
Original title: Auntie Photon
Hi all
I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.
Help, please.
Hi Varun,
Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.
Please help me with the following information related to this issue:
- You have installed the required software on your computer which came with Auntie Photon?
- Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
- Press Windows Key + X.
- Select Device Manager.
- Check if there is no error or exclamation point under Auntie Photon.
This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.
Please follow the steps mentioned below:
Method 1: Run the hardware troubleshooter
The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.
- Press Windows key + W on the keyboard.
- Type the Troubleshooting in the search bar and press Enter.
- In the Troubleshooting window, click show all in the left pane.
- Click hardware and devices.
- Click right on material and devices and and select run as administrator.
- Click Next and follow the on-screen instructions to complete the process troubleshooting.
If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.
Method 2:
Note: Make sure that the Auntie Photon dongle is plugged.
Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:
- Press Windows key + X on the screen.
- Select Device Manager.
- Expand the network adapter and right click on driver and select Uninstall.
- Restart the computer.
- Windows will automatically load the drivers.
Step 2:
You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.
Windows Update: frequently asked Questions
You can also get in touch with Auntie Support and check the updates to driver for Windows 8.
Please answer us on the State of the question to help you further.
-
Connect to the console of vCenter device using the roots
It is possible to connect to the console of the vCenter (5.5) device uses root? And I don't mean via SSH; I mean in vCenter open the 'Virtual keyboard' unit vCenter VM and then login? When I type in the root, it asks me not even a password - it just says: invalid connection. Curiously, if I type in administrator would it ask for a password but I don't know what is this password (I was just with administrator to test to see if other accounts acted the same way).
Thank you
NK
Too funny - I had to reboot the device last night in a different purpose and when I tried to login this morning to get the screenshots, it worked. Chalked it up to gremlims/Ghost in the machine.
Thank you
NK
-
Can I have the Profile Manager uses the name of the device used when the placement of placeholders? Currently, all get renamed 'iPad' when the device through DEP configuration.
No, but
I was putting new devices in groups of temporary devices and renaming in bulk, once they are configured for the user, by using user variables / unit...
The other annoying problem would be the user modifies the device name when they connect it iTunes...
- the %destinataire% email - address email (the EMailAddress attribute)
- first_name % - first name (FirstName attribute)
- full_name % - full name (attribute RealName)
- % of guid guid (GeneratedID attribute)
- last_name % - last name (the LastName attribute)
- the title of the post (the JobTitle attribute) %
-% mobile_phone % the number of mobile (laptop attribute)
- short_name % name run (the RecordName, generally the name of the account attribute)
The variables of the unit are:
- % BuildVersion % - full OS version on the device
- ICCID % - ICCID (from the SIM card)
- IMEI % - IMEI (International Mobile Equipment Identity)
- OSVersion % - common version number of the operating system of the device
- ProductName % - name of the product
- SerialNumber % - serial number
- % WIFIMAC %-MAC address of the WiFi interface
-
Equium A100 stops or crashes when I connect a USB device
I'm getting desperate now, but whenever I connect a USB device that is powered from my laptop IE sitting navi or mobile phone or ipod the thing just lock up or stops.
All ideas will be very welcome; I checked issues of battery and made sure that my diet is in order but am at a loss!The same thing happens with all the USB ports? I also use several external devices using the USB ports, but everything works OK. Have you tested with USB?
Your preinstalled laptop comes with a recovery image?
-
Satellite Pro A40 can't connect to the WLan using the Win XP
Hi all
Newbie on your site so thank you in advance for your answers ;-)
Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.
Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?
It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.
Any ideas please?
Thanks Mike
Hello
First of all, you must update the WLan driver.
I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.Last but not least, you can try to use this command in a DOS (CMD)
Ipconfig / renewBig names
-
Satellite L300D: Unable to connect to a network using WIFI
I can't connect to a network using WIFI on my new laptop (which seems to be fairly widespread)
When I followed the advice of the Knowledge Base, he said I should see an unknown device icon when I click on the other peripheral icon instead there is an icon of Ethernet controller with a yellow label on itAny help would be accepted with gratitude,
Kind regards
DavidHello!
What section of the Knowledge Base do you mean?
However, try to update the driver. You can find it on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversSometimes, I read in the forum that a BIOS solve the problem too.
Additionally, make sure that the wireless is turned on with the power button on the computer laptop and FN + F8.
Good bye
-
Equium L300 unable to connect to my router using wireless
I have a laptop Equium L300 and can't connect to my router using the wireless option.
I am told that the wireless feature is disabled on my pc but the switch on the front is activated.
Can connect with the cable is the wireless.
Anyone know what this could be?
Try pressing Fn + F8, only the activated Wifi become?
In Device Manager, the wireless device is reported to work ok?
Try a BIOS update as well.
-
Just got the new Sony STRDN 1030 and hung to the audio and video. Connected TV using component, because it is an option only with my Panasonic Plasma. But I am unable to get any video same menu to display on the TV. Help, please.
Hi asingh98,
You can display the GUI (Graphical User Interface) or to A menu screen / audio receiver on the TV not screen with an HDMI connection. Cannot display the GUI Menu if the receiver is connected to the TV using component cables.
However, if there is no video signal at all from the receiver to the TV, then there may be a problem with the resolution of video output selected in the receiver. Select the appropriate video resolution and check if that helps.
Ensure that you have selected the correct entry in the TV and the receiver.
Connect devices to the receiver and check if the same problem occurs with other video cameras too.
If the problem is not resolved, try using a different cable to connect the receiver to the TV. You can see the Sony connection guide for the instructions to set up the appropriate cable connection.
http://eSupport.Sony.com/us/p/tutorial-display.pl?tut_id=438&MDL=STRDN1030
If my post answered your question, please mark it as an "accepted Solution".
-
Original title: deleted Ethernet adapter
Hello
All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.I tried to insert Dell drivers and utilities disk, but that does not change.I tried to download on an other computer files from dell that look like they are pilots.I tried to set up a new connectionNone of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?Thank youKevinHello
1. what you're trying to fix by running registry cleaners?
2. How did you remove Ethernet card?
3. How are you online using other devices?
4. What are the devices are?Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
Maybe you are looking for
-
Hello, I have a HP Pavilion notebook 17-g113dx that I bought a few days ago. I noticed in the specifications that the card reader it says "Supports MMC memory cards formats". My question is that I will be able to use SD cards in this dwelling? I ha
-
HP dv7t 7200 wifi like no auto connection
whenever I turn on my laptop, it connects to the WiFi for a short period of time and then dissconnects and I have to reconnect to the network manually. After doing this, it takes an extremely long time to login automatic and says "network connection
-
interface TeGig, xfp remains upward with low DBm Rx
Hi, does anyone know why the interface remains upwards, when receives a lower than expected power. If we can avoid this? How? SPA-1X10GE-L-V2 with XFP-10GLR-OC192SR The sensitivity of the receiver (maximum) is SR-1 10GLR:-12.6 dBm We receive-20 but t
-
OnShortcut of Java command work do not
Can someone help me with something onShortcut?I have the OnClick function for the below, but onShortcut alt + do not work, any help would be appreciated.myPanel.timeSavers.MyTools_tab.nullButton.shortcutKey = 'R';myPanel.timeSavers.MyTools_tab.nullBu
-
Made network signs necessary?
I want to network rendered using CC2014, I installed AE on 4 Mac, but I can't start without signature network rendering in and disconnect other Macs.So, basically I can use 2 macs for network rendering?I thought that customers were free to network re