Connect to more than one server vCenter using PowerCLI

Similar Questions

• Server became the exception system when it is connected to more than one group of network

  I did the capacity planning on a server centos with 2 network cards. 1 connected to a public IP address and the other connected to a 1 private IP address. Scheduler capability of this server in 2 groups of subnet. When I ran the assessment, it is as a system exception lists. How can I change the report so it won't be listed as such?

  I also found that when I deleted this server in Capacity Planner and add it back with its private IP address it was always part of the IP column seen by its public IP address while private in alias, IP address although I had unchecked group of the public in its setting IP address subnet.

  Capacity planner version is 2.8.0

  Reason for the exception

  The system belongs to several groups

  Resource of exceptional value

  SUBNET: 192.168.2.0, SUBNET:
  202.xxx.xxx.

  You specify the script optimization of networks to merge.  By default, servers in different networks should be distributed on the unique ESX hosts.

  ESX can handle it anyway, by having several groups of ports & VLAN assigned, which shouldn't be a problem overall.

  Best regards

  Jon Hemming

• Is it possible to have more than one ID to use in the browser edition

  I have a Web site that is used by a school.

  I wish I had the 5th grade teachers change the 5th category only - page similarly other ranks.

  is it something I can do with the edition of Muse in the browser?

  I've also added an ID that is different from the one I use to download the Web site to the server through FTP.

  log on to the site via the editing in the browser gives me error FTP I see other have.

  The FTP server configured for this site does not match the URL that you entered. Make sure that you use the download to the FTP host function in Muse to publish the site directly at the final location, and that connect you to edit in the browser with the same user.

  Hello

  Please try some of the solutions mentioned in the last comment in the following thread

  Editing in the browser: "error there was a problem in opening the file on your FTP server. ' / index.html: no such file or directory ".

• WAP54G access point cannot connect to more than one PC at a time

  Hello

  I'm a newbie in the entire wireless router installation process.

  I have a WAP54G AP. I managed to enter the configuration page and rename my router and set a WPA2-Personl password.

  The issue I'm facing is that when my roommate and I try to connect to the router at the same time, it shows the laptop that connects then as one who has "limited connectivity" and so cannot use the internet. However, the 1st laptop works very well!

  The settings for the router were all left by default.

  I don't know, but this problem has something to do with the fact that the router that is configured with a static IP address.

  If Yes, then there is an another issure which is that whenever I have try to change static automatic/Dynamic IP, the page fails and that the router is not even connect to configuraion (192.168.1.245) page after that. The only way to get this page again is the reset of the router.

  Also I am not able to get directly in the config page, when I connect my router to my laptop through lan. I need to change the LAN IP address to 192.168.1.x where x is > 1.

  Is this normal or is there a problem?

  If anyone has a solution to all or part of these problems, I'd love to hear back in shape as you.

  Thank you!

  SIS

  Yes. This is the reason.

• Group Policy for account lockout if connected to more than one station.

  Is it possible that I could block a user if the account is used in several positions? My active directory is running on Windows Server 2003.

  Any help will be much appreciated.

  Hello

   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
   
  Hope this helps

• Cannot connect to more than one mail account after the upgrade to Sierra

  I have several provided ISP e-mail accounts that work successfully for a long time on elCapitan.  After the upgrade to Sierra this afternoon cannot connect all accounts and I asks me to enter the password.  Why isn't Sierra pick up the passwords of my trousseau?

  Oddly enough, my Hotmail account seems to be ok.

  How can I fix this without having to re - enter all passwords?

  As a result of the foregoing, I found that my connection Keyring contains entries for all of my email accounts.  However, these dates are back in July 2011.

  After an episode of lost or stolen iphone, I had to update all of my passwords by e-mail in February this year (2016).

  Search in my keychain, I found dated entries for my email accounts in iCloud Keychain section.  I don't think that I never activated iCloud for my email.

  How the entires of e-mail account eventually sub iCloud and why the old entries from email account not updated?

• EBS - more than one active user session?

  Hi all

  I was wondering if there is a way to set up the application so that a user cannot connect to more than one computer?

  I mean, is it possible for example that a user connects a computer and then when logging into another, the system closes the session in the first?

  Many thanks to all,

  Mario

  Mario Cura wrote:

  Hi all

  I was wondering if there is a way to set up the application so that a user cannot connect to more than one computer?

  I mean, is it possible for example that a user connects a computer and then when logging into another, the system closes the session in the first?

  Many thanks to all,

  Mario

  Please see:

  How can I limit user Applications must be signed only once at any time (Doc ID 375403.1)

  How can I limit user Applications must be signed only once at any time (Doc ID 1628081.1)

  What is the maximum number of users that can share the same name of user/account Applications? (Doc ID 1624635.1)

  Thank you

  Hussein

• We have more than one PC connected to the same (IMAP) account, there is an error sending server and works as a single computer at a time.

  We have three computers to check the same email account (IMAP) and when more than one is not working and try to send a message is displayed:. 'Server offline [email protected] that the server may have dropped or there may be a network problem.
  Right next to Thunderbird on other computers, with only a computer connected to the error disappears, and everything works fine.
  When that happens, sometimes gives error when sending an e-mail, "error save message in sent" and the mail is not stored in the thunderbird or on the server, but is sent.

  Menu Tools > account settings > server settings > asvanced and reduce the number of connections from 5 to say 2 and see how it goes. I m the connection altogether on the total machines is the question can be reduced then should help.

  Seriously have several concurrent users is not a good way to manage an imap account.

• There is more than one active network connection on your computer

  I have two ISP with 2 different IP addresses of course. With one I connect via cable, the other is wireless. Until a couple of days, I'd keep the Wi - Fi turned off on the front of the case, to allow the laptop to connect only to the cable connection.
  Some sites were not loading, indicating problems with DNS resolution. I checked for possible reasons online. I tried to connect to these sites using a webproxy and it worked, so I thought I would try the wireless connection. I turned on and sites would be load normally. However, when I checked my ISP number this shows that the active connection cable one.
  I hesitated to leave the switch turned on, but in order to leave these sites load, I thought I had no other choice. Needless to say that I am not notified at all or with the networks or computers.
  Everything seemed to work fine until the wireless connection has started having problems anyway, it stopped working (ISP issues), so stopped at new loading sites. I tried troubleshooting it and he said: "it has more than one active network connection on your computer" and suggested I would disconnect them. Naturally, I unplugged the wireless connection. Problems: I can not load the sites that seem to need to have wireless to turn on. Note that it does not need it to be active, only to have this switch.
  Please let me know if there is anything I can do to correct this inability to connect to the servers of some sites without the need to have that switch on. If there is no explanation for this behavior, which does not make sense. Again, I know nothing about networks or computers, forgive my ignorance!
  I use Windows 7 Home Premium x 64, my laptop is a Vaio. This happens on all my browsers and sites that have stopped loading were load normally when I 1st turned on the laptop the same day. To later that day there some sites stopped to load, which made me think it was a matter of site. Then I realized that it was not connect to twitter, which was not down, so I realized it was my problem.

  It looks at when you use the wired connection THAT DNS has failed.

  In order to clarify the names of web sites means absolutely nothing to a computer in itself, www.google.com is completely useless. All comms on a network revolves around the IP addresses and the DNS service is a process by which the dedicated servers which addresses are known can tell your PC what is the address of a Web site. For some reason any on the wired connection your PC isn't getting the address to soundcloud.com.

  In family situations more of a PC it gets the IP of the router settings, of course I don't know if this is true in your case. If you open a command prompt and run ipconfig/all, paste the result here and we can check. This would include which server DNS to use that, as I said is normally the router. There are actually millions of internet addresses, and your router could not store them to remedy this it forwards a request for an address of DNS servers listed in its own configuration of IP internet side.

  If you can connect to the router and look its DSL or WAN configuration, you should find at least one or two DNS servers. Take note of them. If you can't connect to the router then look at the website from your ISP for their parameters.

  On your computer, go to the network control and Internet\Network connections, right-click on your wired card, and select Properties. Double-click Internet version 4 Protocol. In normal use get it 2... buttons should be selected, are they?

  If you change only the down one to use the following DNS server address and enter the fields, addresses that you got the router. Click OK twice, but leave the window network connections open as you need.

  Now, try to get your site into a problem. If you can then the problem is with your router. Instead of asking the router address you have bypassed this stage and went on the server, your router is configured to use.

  If you are still unable to the site then the problem is further down and your router may be OK. Then go back to where you set the addresses DNS and replace those that you got the router and turnkey 8.8.8.8 primary DNS server address and 8.8.4.4 in another address, OK once again two times and then try again the site. These 2 addresses are own Google public DNS servers and should work.

  If the ISP provided the router they should replace it. Explain what is the problem and the results of these tests, although I have no doubt that they insist on their own checks before accepting.

• Remote Desktop RDG cannot have more than one remote gateway server.

  Original title: Remote Desktop RDG

  The app works very well except that you can not have more than one remote gateway server.  I have two different infrastructures that I connect and they have different configurations of RDG.  You cannot change the advanced options when you create a new connection.  You can't modify it until you connect once.  I can not connect because the RDG are for another server.  Check connection options during the installation of the initial connection.

  OK, never mind.  I figured this out.  When you are on the home screen see you the bar charms and select settings.  From there, you can change the default RDG server machines new use.  Exactly what I needed.  Works fine now.

• Possible to have more than one UI language in a deployment of Connect?

  You can have more than one language of the user interface in a Connect deployment? For example, we would like to have English to be our basic UI, but for Japanese users have Japanese be the user interface. We do not want to create a separate instance for each required language. Is it possible, or anyone found a way to do this?

  1. all supported languages are installed when you install the server.

  2. when a user selects a language, this language file is used as reference for all connect related text. However, meeting rooms and individual content items will appear in the language that they were created with.

  3. Yes, if you really want to dig for what text is displayed in each language, you can go to {install directory} \appserv\apps\lang\ and there will be an XML for each language on the server.

  4. not all supported languages come with the server.

  Screenshot of the user's specific language setting:

  

• more than one user connects to pc (windows7). How can I block access to my media

  more than one user connects to pc (windows7). How can I block access to my media

  Original title: media sharing options?

  Hi Gabe,

  I appreciate the efforts that you put to publish the query on this forum.

  It would be better if you can provide additional information related to this query:

  Who are the media that you are trying to secure on the computer? Is it related to any multimedia files or folders?

  If you try to get the files or folders, you can use the Windows 7 encryption method to do:

  http://Windows.Microsoft.com/en-in/Windows7/encrypt-or-decrypt-a-folder-or-file

  Please get back to us with more information to help you better.

• Error message is "There is more than one active network connection on your computer"

  Original title: barely internet connection

  Sometimes I can get on the internet, but most of the time not.  After some troubleshooting I get a message read 'your computer seems to be configured but correctily the device or resource (www.microsoft.com) does not' after continuing to shoot badly today I received this message: "there is more than one active network connection on your computer.  If any of these connections are not configured properly you may not be able to access the Web site, device or resource (isearch abg.com) and the following message: "There is more than one active network connection on your computer" I don't know what to do with this information.

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks that you are having problems with the Internet connection.

  Perform the steps mentioned below and cehck.

  a: Go in Control Panel > network.

  b: Then click on network and sharing Center

  c: Then click on the change adapter settings on the left hand side
  d: Right-click on the network connection , and then select Properties.

  e : select Internet protocol version 4 (TCP/IPv4)
  f: Click on the Properties button
  g: click the advance button
  h: uncheck the option which reads 'use the gateway on the remote network' in the ip settings tab.

  Meet us if you encounter any problems with the network connection or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• How to use more than one address at the same time?

  The Adobe server page that allows entry of a recipients address should not inform users how to add another address?  We separate them by semicolons? Commas?  Or is it still possible to use more than one address?

  Hi orison123,

  You talk about Adobe send? If Yes, you are absolutely right. Who should be written somewhere I had to double check and was able to send to multiple email addresses separated by commas or semicolons.

  Best,

  Sara

• Can I connect more than one headset bluetooth with Apple TV 4?

  Can I connect more than one headset bluetooth with Apple TV 4?

  No, sorry. This is a limitation for all devices Bluetooth headset.