Connect to the internet window will not appear.

Similar Questions

• Using a Vista laptop, connects to the internet, but will not load page. DNS problem.

  Hello.

  I use a Toshiba laptop with Windows Vista Home Premium 64-bit.

  I just have a modem and use a router. I have a network cable (cat 5) connected to my laptop and the modem. I have log-on internet and it connects. But when I open Google Chrome, IE9 or Firefox I can not load a web page. Google mentions something about the DNS cannot be found and DNS_Probe_Finished_No Internet.Frefox says server not found.

  I click on the Menu start - Connect To - I am logged in. I already typed my password in the command prompt and appropriate the pppoe connection/address (I use ADSL).

  I talked to my ISP and we tried to do certain things. But nothing works. On their end, it shows that I am connected. But I can't browse the internet. We tried to have the DNS and IP address for ipv4 set to obtain automatically and I put 2 numbers of DNS in manually once the settings have been changed to the favorite servers and DNS auxiliary, or worked.

  Using command prompt, the DNS has been emptied. It did not help. The modem has been reset the ISP location. I also recreated and set up a new network connection.

  My office is using the same pppoe information. I can freely browse the internet and I use Windows Vista Home Premium 32-bit. I was also shown to be connected simultaneously with both machines, but that the Office can go.

  I do not have Windows Update the laptop since on April 2016. It has not been used and the battery was empty. I tried to turn off the laptop several times, but nothing works.

  Y at - it suggestions to solve this problem? At that time perhaps a re - install will work.

  System Restore worked. I will run the updates and see what happens.

  I think it was a program that I uninstalled in programs and features.

  It's also useful information for this post: https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/unable-to-connect-internet-dns-error-windows-7/72040e27-7a87-4f6f-88d6-9d158da38de8

  1.

  Note

  • You must open a command with elevated privileges prompt to complete the following steps. For more information, see command prompt: frequently asked questions

  1. Click the Start button.

  2. In the search box, type command prompt.

  3. In the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. At the command prompt, type ipconfig/flushdns.

  2.

  Start - Search programs and files
  Type "Command Prompt".

  Right-click in the program file that appears above the run as administrator.

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

• S3100 says it is connected to the Internet but will not play Netflix.

  I read where everyone seems to have a problem that they can not connect to video services.

  I think it's sad that an update makes your unusable.  Never had a problem with my Panasonic TV boxes.

  I don't really know how to make a network connection to the hand.  Why are told that it is connected?

  YOU MUST DO AN UPDATE TO FIX THIS!

  Hi MichaelJohn and lhendricks,

  Try to initialize the player requests by going to settings > reset > initialize personal information > OK, and then click on and select Internet videos then agree and on the following end user license agreement.

  The issue only happens on Netflix, how about other apps?

  Do you receive an error message?

  If my post answered your question, please mark it as "accept as a Solution.

• How do another firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  Hello

  • What version of Windows are you using?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions

• All-in-one HP Photosmart C6280 not connected to the internet, and can not scan to computer

  My HP Photosmart C6280 all-in-one not connected to the internet, and can not scan to the computer.  I got it for a few years and must plugged into my Macbook to print, but now I want to use it to scan photos directly to my computer.  Can someone help me to do this?  Much appreciated!  (Not sure where are my original softward records!)

  Oh, OK, well this isn't probably the problem, but for good measure, you should get the latest version of the software for your printer from the "support & drivers" link at the top of this page.

  In the meantime, we will reset the printing system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Top of the window, Select the default tab . Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Hi, Rlayhee,

  Printer brand/model?

  Start > Control Panel

  Select the Printers folder

  Right-click on the printer icon, then select open

  Are there pending print jobs

  If Yes, click on file > cancel all Documents

  Close the print queue and the printer folder

  Try printing again

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printer (if any)

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the driver and select uninstall

  Close the Device Manager

  Restart the computer to Windows to reinstall the drivers

  Go to the manufacturer's website and search for driver updates

  Try printing again

• Hello, I have a creative signature cloud trying to renew the plan and will not appear in the information of the plan page. What should I do? adiquiro a new plan? or can someone help me?

  Hello, I have a creative signature cloud trying to renew the plan and will not appear in the information of the plan page. What should I do? adiquiro a new plan? or can someone help me?

  Hello

  For more information, see the following links:

  Renew, restart, or extend your Adobe Creative Cloud membership

  'Renew your membership' message when you start an Adobe Creative Cloud application

  If nothing helps, please get in touch with support with adobe:

  Contact the customer service

• I can't download a video clip. the download of this window will not appear

  I used to be able to click on a clip and a little box would come saying 'Download this film '. I just click on that and the movie would download. Now download this movie window does not appear

  Hello

  It could have been the feature added by an Extension in Tools (Alt + T) > Add-ons. You can try updating Firefox , then look for updates for the extension in right-clicked on it in the Add-ons Manager. You can also try an alternative.

• WRT54G will connect to the network but will not connect to internet

  Guys, I installed an older Linksys CM100 cable modem and when I did I lost the connection to the internet using the WRT54G Router. I can connect fine net when I go to right fromt the modem cable to the pc. I can use my home network very well. I did a firmware upgrade, does not. I'm losing my mind. It worked fine before the new cable modem. Does make sense to anyone? BTW, I can't connect to the internet via wired or wireless connections and ping www.google.com gives 100% packet loss. Ditto for a ping to 192.168.1.100 (cable modem) when the router is connected.

  Dear God please help me

  -Jacob

  Thus, because no one here was able to offer all the help, I called tech support and was very surprised. I was able to get a tech immediately and without going through the 1 million on the phone buttons. The service is in India, but I could communicate well enough with him, even though I usually have people of understanding of handful who speak English as a second language. The issue that I had was that the default IP of the modem cable (192.168.1.100) and ip address of the router (192.168.1.1) were too similar. Apparently, the fact that the 3rd number 1 for both series was the cause of the problem. We changed the IP address of the router to 192.168.5.1, power cycling it and unfortunately it worked.

• Old computer reinstalled XP cannot connect to the internet. Could not find the iexplore

  I have an old computer.  I reinstalled Windows XP on it about 30 days ago.  I can't connect to the internet.  I bought 2nd hand computer and I bought my own version of XP directly from Microsoft.  I can't activate.  I can not even find iexplore.  Any suggestions?  I installed a driver for the ethernet card and still nothing.

  I've never dealt with XP MCE, but from what I've seen, you can get ambiguous messages during the installation process.  MCE was never intended for installation by end users; It came normally pre-installed on computers that have the necessary equipment to support additional features 'media '.

  It seems to me that if you have to start over.  First of all, you should get a prompt for "Windows XP Professional CD2" - who wants to have the second of the two CDs.  Then you should get a prompt for "XP Professional Service Pack 2 CD." In response to this prompt, insert the CD first back in.

  Assuming that work better than before, right-click on desktop and select Properties.  If the display shows service pack 2 - which I believe it will be - you only need to install sp3.

• I cannot connect to the internet and can not find networks as well.

  Original title: a disc XP Wibdows will repair a missing msnuser file? I can't find all the networks to connect to the internet.

  After a router problem, I had to change the name of my network. All my other PC is connected. My Dell XP Pro has for some reason not configured to search for local networks. The only error message I got was 'msnuser file is no longer available.

  I have a brand new Windows XP in case of a crash Pro CD, but I don't want to try to find out that I lost what is already stored.

  This CD will correct connectivity issues? I could back up what I need if she wants. BTW: Dell has been no help.

  Thank you.

  Hello

  I you have to check out these items-

  http://support.Microsoft.com/kb/832161

  http://support.Microsoft.com/kb/870702

  http://support.Microsoft.com/kb/308007

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.microsoft.com/kb/322756 - how to backup registry.

  Let us know if it works for you.

• DNS error - IE cannot connect to the Internet - Windows XP SP1 :(

  I'm trying to help my brother. We have a Dell Dimension 3000 running Windows XP SP1. The computer has a virus, and a clean installation was completed. That is why, it is show SP1 now that those were records. Everything seems to be OK until trying to connect to the Internet (there's currently IE6). From message which can not find the DNS server.

  I've done several things already including cleaning winsock and winsock2 and reinstall TCP/IP. Manager of network devices is here. I get a ping to the IP address 169.meta XXX but no ping at all outside the site.

  I went into Internet Options menu. I'm lost what to try next. Help!

  Thank you.

  Joelkaghami,

  Ok. Let me clarify a point. My brother lives in a different House, further away from me. I have the Dell Dimension now home trying to get updated, he had a virus and system has been reloaded. But he was only SP1. I know it will take forever to download and update the machine through dial-up and the disc, he got the ISP did not recognize IE6.

  So, to help my brother, I brought the computer to my house I have a DSL network and I was going to the network it and then do the automatic updates to update the system here and then give it to him. However, I could not the computer to communicate with my network.

  OK, that makes more sense to me; Please specify.

  In the meantime, I downloaded the SP2, SP3 (still need to install this one as stated above) and IE8 on the site of MS. I have have updated the computer, but still can not communicate with my network. And that is why I am asking about the modem ISP connection. I thought just update with SP3 and then ship back to his house and let him try the ISP software. It might just make him go.

  Good.

  In my view, sp3 includes a newer IE, but I'm not sure.

  Anyway, if you want you can download the updates, and then copy them to the dell.

  1. go on a computer that can go on the internet.

  2. download the updates on the hard drive.

  3. copy the updates to the dell via USB key, cd, dvd, etc.

  Here is a link to download a newer IE:

  http://www.Microsoft.com/Windows/Internet-Explorer/worldwide-sites.aspx

  Here is a link to download the sp2:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

  Here is a link to download the sp3:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Here is a link for the updates (you won't have it):

  http://support.Microsoft.com/kb/322389#tosp3

  So that's the story. Sorry if I confused you sooner.

  No prob.  I really wanted to hear that the dell works and can get on the internet.

  If I helped let me know!

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• HP LaserJet 1018: For the printing window does not appear

  This problem started recently.  When I try to print on both sides, print the first side, then the little window that used to appear with instructions to remove and re - insert the page for printing of the second part does not appear.   This means that there is no "continue" button click on because it's in the same window.  So I can not print the second side.

  Any suggestions on what is wrong and how to fix it?

  Hi @msdop ,

  I see that you have problems printing manual duplex, the window is not to come to continue to print across the page. I will definitely do my best to help you.

  There are a couple different things you can try to solve this problem.

  Restore your computer to an earlier time when everything worked correctly. He could be an update that caused this problem.  Restore the system for Windows 7

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  Uninstall and reinstall the printer software.

  Uninstalling the printer software.

  Windows 7 64 bit drivers: HP LaserJet full feature software and driver.

  Windows 7 32 bit drivers: HP LaserJet full feature software and driver.

  If you need help, let me know.

  Have a great day!
  Thank you.

• My site connected to the server, but do not appear

  I connected successfully in dreamweaver... but will not appear... says not found... using the godaddy Server

  When you created your hosting account?

  The domain name was purchased?

  The domain name was still filled to your server?  If in doubt, contact your Web host to confirm the account is activated.  And you have the correct credentials including the root directory connection.

  Nancy O.