Connect to the TV with HDMI to HDMI connection

Similar Questions

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Connection Satellite L750D to the TV with HDMI cable

  I tried to connect a laptop L750D to a Phillips TV but none is displayed on the TV and the message on the TV is «unsupported video»

  When I connected the laptop to the TV and turned on the laptop, it's in restart mode and the messages showed on TV, but as soon as windows has started to the top of the screen of the TV turned blue and the "unsupported video" message appeared.

  I then plugged a laptop HP pavilion g series to the TV with the HDMI cable and using the same port HDMI on the TV and the computer screen is appeared on television right now.

  Can someone help me please?

  Hello

  Try this:
  Both devices (TV and laptop) must be turned off but connected with a HDMI cable.
  Then turn on the TV and the laptop.
  After Windows has started, use the Fn + F5 secret key to switch the video output to TV.
  Is this possible?

  By the way: have you chosen the right graphic resolution and supported?
  Don't forget that you TV supports the resolution which has been chosen!

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• No sound from the tv with hdmi w3 connection

  I have a standard micro HDMI to connect my w3 to tv.  When a movie plays on the w3, I can see the video on the Tablet and the tv, but only the Tablet has its.  Is this normal?   I checked that the tv properly with other hdmi sources works but have no way to test the brand new microphone cable or w3 drivers.

  I was unable to locate a compatible driver on intel.com.

  However, I tried the w3 with a different TV and everything worked as expected: even with only a 'driver' Intel ESS Audio Device (WDM) available.  Passage of the tablet on television was automatic.  I did plug in and turn on the tablet in front of the TV and everything worked.

  I tried the same procedure with the original tv and the results were good video but no sound from the TV.  The sound remained with the tablet.

  I hae 2 TVs and 2 blueray players.  I swapped every combination of TV and player and everything works well.  Since the Tablet works well with at least one TV, the hdmi cable is ok.  My conclusion is that the current configuration of the Tablet works with some TVs and others not, and until I can find a better driver I'll just have to live with it.  I wanted to be able to watch videos with the Tablet when I traveled and will just have to wait until I get whenever I go to see if it works.  Not very desirable but it's like that.

  Thanks for your suggestions and help.

  Problem solved (sorta).

• Problems with sound when it is connected to the TV with HDMI

  When I connect my laptop to my tv with the HDMI cable everything is fine display wise, but when I go to netflix and watch a movie instantly the sound comes only from the laptop. All other windows sounds come through the TV speakers. Any solution?
  Sony VAIO Windows Vista laptop. Model is VGN-NW150J

  Hi RayBeaudry

   

  Follow the steps below and verify that the default audio device is correct-

  a. click Start type sound in the box start the search.
  b. click on his research at the top of the start menu.
  c. click the read tab notice the check mark next to the default device. For the most part
  users, the default device's speakers.
  d. Select the audio device output digital (HDMI) device to set as audio device as the default, and then click on set as default.
  e. click the Properties button, and then select the levels tab and make sure that the volume
  is at 100 and not cut.
  f. click OK to save your settings and close the sound dialog box.

  Check the link for assistance on the question below
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

   

  I hope this helps.

• No sound from the laptop to the TV with HDMI connection

  Reference Dell Laptop windows 7 connected to the Samsung 46 '' smart TV with an HDMI cable.  Video works great but no sound on TV.  Is there a setting somewhere that will cause the audio to work from the laptop to the TV via the HDMI cable?

  Right click on the sound icon in the system tray, select playback devices and output of the default value.

  You will need to install an audio HDMI driver for your graphics card if the HDMI output is not displayed...

• Lenovo Y50 only using Intel graphics when connected to the TV with HDMI output

  I recently bought a Lenovo

  you right click on the exe of the fricken game and select 'use nvidia? !!!

  I'm doing it right now with my laptop computer and connected to the tv and it works with my nvidia card... I can also say his work because of the small icon in the lower right... See the photos...

  

• Setting the resolution with HDMI

  I'm trying to connect my laptop Sony Vaio (VPCEE2M1E with AMD/ATI Radeon) to my couple of years Toshiba TV.  The Toshiba is the brand "HD READY", but when I hook them together the default resolution is 720 not 1080.

  I went to control PANEL / DISPLAY / SETTINGS HDMI to try to reset manually but 768 and 1080 selection buttons are both in gray.  Also, I can not select the 'Adjust Resolution (Disable)' tab to see what's there.

  The HDMI cable is a cable of high quality IXOS, so that should not present any problems.

  Any thoughts?  Very much appreciated.

  I'm trying to connect my laptop Sony Vaio (VPCEE2M1E with AMD/ATI Radeon) to my couple of years Toshiba TV.  The Toshiba is the brand "HD READY", but when I hook them together the default resolution is 720 not 1080.

  What is the model of your Toshiba TV? 720 p is one of the HD, just not one of the highest resolutions and lots of 720 p always sell TVs HD. Many of those who are capable of 1080i (interelaced) resolution, you must check the specifications of TV to find out. 1080i is not as high resolution 1080 p, but he could make videos to look a little better than 720 p.

  The other consideration is that you may need to add the resolutions undetected in your resolution settings using Catalyst Control Center Radeon card. If you only use the video card drivers MS (ie. not provided on the video card driver disk or downloaded from ATI) then the additional resolution settings may not be available.

• E535 on TV with HDMI connection

  I must be missing something - I'm trying to connect my E535 HDMI output to the HDMI input on my LCD of Panasonic Viera TV.  I joined the two ends of the cable to the corresponding ports, and I get nothing.  I select HDMI 1 or 2 on the TV and still nothing.

  I also tried to toggle the selection of the display F6 key, although I think it is active only when you are using the correct VGA port?

  Lenovo manual is fairly brief on the issue of DVI, so someone can tell me what I need to do in Panel or elsewhere to get the display of the computer on the TV with HDMI?  Thanks in advance.

  I don't want to remove the cable by attaching (preferably) using two different devices.  This is not the laptop or TV.

  Second choice would be portable computer connecting to a different TV or connect a different device to your TV. Or if you can borrow another HDMI cable.

  It is quite normal for the cable to be a little hard to connect.  She must be aligned both the up/down and left/right.

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• System Restore does not not on windows vista & connection with HDMI to the TV problem

  Hello, we had a problem with the restoration of the system, that we are on family vista premium, we continue to get the message there was an error unspeccified and system restore did not complete. We don't have a norton security, but use AVG professional. We tried several different restore points with the same result. Also maybe it's a coincidence but connect us quite often the PC via HDMI to the TV, it has always connected without problem, it has also stopped working so the reason we thought that system restore has been the answer. Any ideas would be received with gratitude thank you

  Hello

  Back up your files and perform the Inplace upgrade. That should do the trick.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

• Satellite L500-13F connected to the TV with an HDMI - no sound on the TV cable

  Hello! Sorry, my English is bad.

  I have a problem, I tried to connect my laptop with TV via HDMI, but
  reading on laptop rather than TV sound...
  In Manager Realtek HD I found no "Options for HDMI output.

  Please, which suggests what should I do?

  Hello

  Have a look here, maybe it helps you:

  http://en.kioskea.NET/forum/affich-79711-laptop-sound-on-TV-with-HDMI-cable

• Second screen with HDMI audio source after connection or wake

  It is a very minor issue, but one I still dealing with.

  I have a BenQ RL2455M monitor connected to my MacBook Pro w / retina with HDMI. I plug headphones to listen to music and talk on Skype on the plug headphones of the MBP. It all works perfectly.

  The question arises when first connecting my laptop to the monitor (plugged the HDMI cable) or when waking up the laptop from sleep. If my helmet was left plugged in the headphone during this process, so I have no sound. Sound is sent through the HDMI. I have to unplug and plug in the headset to steal her back.

  Of course, El Capitan is the choice the newest device to use for output. It makes sense, when you first connect the HDMI, but less after sleep.

  In addition, this occurs when only my screen is in sleep mode and not my "computer". I changed this setting to 3 hours, because I had some programs that are not keep the laptop awake.

  Hi, kaliblack.

  Please visit Apple support communities.

  I understand that you have an audio problem with your MacBook Pro.  Let's start with a memory NVRAM reset and then do a test to see if the behavior persists.

  How to reset the NVRAM on your Mac.

  See you soon

• Can not connect to my laptop Satellite L655 - 14 c to the TV via HDMI

  I was working with HDMI port to connect my laptop Satellite L655 - 14 c to TV. Everything worked fine for a year. But it has stopped working recently. Laptop detects the TV when connected but TV shows error message "no video signal". I've tried it on two different TVs - does not work. Someone has an idea what is the problem? Thnx!

  Hello

  Have you tried the Fn + F5 key combination to switch between the internal and external video output?
  Try this!

  Usually, you must press this combination several times in order to get on TV

  What display driver update? Try it too!