connect with the windows computer using usb after connecting to the wireless mac

Printer HP Photosmart 7520 connected wireless to the new iMac using Fios router wireless.

Can I connect the printer even to an old Windows computer (running XP) via USB without interfering with the connection Wireless for Mac?

Hi Rekjek,

On both wireless and USB is allowed. There should not be all the problems between the Mac and the PC using the same printer.

Tags: HP Printers

Similar Questions

  • We purchased complete team CC w/One (1) license. If we can deploy specific applications to separate computers, for example the Photo-Design-Acro on a windows computer and first-After effects to a Mac, or license allows - as in recent CS - instalation on 2

    We purchased complete team CC w/One (1) license. If we can deploy specific applications to separate computers, for example the Photo-Design-Acro on a windows computer and first-After effects to a Mac, or license allows - as in recent CS - installation on separate computers of two 2?

    You can activate the subscription creative cloud on two machines, however, you cannot use both machines at the same time. Please check: http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf

    I hope this helps.

  • Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

    + Sorry for my English is not my mother tongue. +

    Hello

    I expose my problem:

    I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

    Configuration of the laptop:

    * Windows 7 Ultimate 64-bit (with all updates installed).
    * All the updated drivers correctly.
    * With the latest version of the BIOS.

    Router:

    * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

    The router configuration:
    * WPA2-PSK AES.
    * 802.11n
    * Maximum output power.
    * Channel: 11 (not automatic, that this channel is relatively free).
    * Width of channel: 40 Mhz.
    * Maximum tx frequency: 300 Mbps.

    Other information:

    The wireless card drivers are correctly then updated (ver. 5.60.48.35).
    * The router has updated the firmware.
    * I tried all the settings of the wireless card.
    * Bluetooth off (without interference).
    * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

    Thanks in advance,
    Greetings.

    Post edited by: Xibalba

    Have you tested using different channels?
    Have you tested speed WIFI connected to another router?

  • Hi the Multiport card of VGA USB - C come with the new Mac book

    Hi, can you please tell me, the Multiport VGA USB card - C comes with the new Mac book or you purchase separately. Thank you, Rob Council

    N ° can be purchased at the same time, it does not come with the computer. It only comes with the charger cable and AC adapter.

    See more Tech on the MacBook HERE

  • Hello. I have Photoshop CS4. Can I use this with the latest Mac OSX version10.10.1?

    Hello. I have Photoshop CS4. Can I use this with the latest Mac OSX version10.10.1?

    Hi Sonste,

    Greetings.

    For many people, it worked, and for some, it didn't.

    CS 4 could give you a run-time error java you can download an installation

    Java for OS X 2015-001

    Suggest you check the link call

    http://www.Mac-forums.com/OS-x-operating-system/317803-Adobe-CS4-Yosemite-10-10-a.html

    Concerning

    Rohit

  • OfficeJet Pro 8500 a - problem with the wireless radio

    First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.

    Yesterday, I bought a brand new OfficeJet Pro 8500 has.

    Since I have found a little bit of my computer and my router I configure for wireless connection.

    All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.

    By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.

    All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.

    Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.

    Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.

    I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.

    I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.

    I hope someone on this forum knows a solution to my problem.

    Useful information:

    Computer OS: Windows 7

    Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)

    Encryption: WPA - PSK

    WLAN: 802. 11 b / g

    No filtering MAC or SSID hidden

    Other devices on the network are two mobile phones and a Motorola Xoom Tablet

    Printers, IP address: 192.168.1.81

    Firewall: WIndows (the router is disabled)

    Concerning

    Thord

    Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.

  • Problem with the wireless on the system tray icon.

    Original title: wireless

    not found wirreless icon in the taskbar

    Hi Amourhbone,

    Thanks for posting your question in the Microsoft Community forum.

    It seems that you have a problem with the icon on the system tray wireless.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
    Provide us with a few details in order to better understand the issue.

    1. which version of the operating system are you using?

    2. deal with any problem with the wireless network using Internet?

    3. do you receive any error messages?

    4. did you of recent changes on the computer before this problem?

    I suggest you try the procedure described in the article and see if it helps.

    System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
    http://support.Microsoft.com/kb/945011

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
  • 4320 proBook s - problems with the wireless Assistant

    Hello

    I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

    Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

    Thanks in advance

    Hello

    You are welcome to help

    The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

    Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

    Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

    Again, when windows restarts, check the internet connection by using only a known secure site.

    Let me know how this affects the problem.

    Kind regards

    DP - K

  • I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

    Original title: right click on the mouse itself activating

    I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

    I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

    Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

    Try to install the drivers from this link and check.

    http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

  • When issuing vNIC with the same MAC on the same vSwitch

    Hi all

    In a public cloud computing environment, only host hypervisor (VMWare ESXi for example) can host VMs of different customers. These virtual machines can use the same MAC address for the vNIC. What happens if these virtual machines with the same MAC connected to the same vSwitch by chance? This will cause the MAC table on the vSwitch updated constantly which would lead in turn to the performance problem.

    How vSwitch or what type of solution could solve this kind of issue and provide a network environment isolated to each cloud tanent?

    Thank you!

    It would be on the cloud provider (who generally do not use vSphere anyway) to mitigate.

    If you are a supplier, you can use something like vCloud to isolate your environment shared with the support of as vShield products and technologies such as VXLAN.

  • Cinema screen compatible with the new mac pro?

    My old Mac Pro work view movies (bought new in 2008) with the new Mac Pro?

    Yes. Use a Mini DisplayPort or HDMI to DVI; a screen 30 inches requires a Mini DisplayPort connector to DVI double bond one.

    (140103)

  • I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

    I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

    and when I go to install the mac lion antiracism apple with reticle logo means error

    what can I do with these

    Please help money

    You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

    If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

  • Will 1st gen magic mouse will work with the new Mac Mini?

    #1

    I'm going to buy a new Mac Mini and one of the options is to add a second magical mouse of gen. I have a first gen magic mouse. I guess this first mouse magic gen will work with the new Mac Mini, but I want to check.

    The old mouse Apple and any other generic pc mouse will work fine with the Mac Mini.

  • Creative Suite CS 5.5 is compatible with the new Mac OS maverick

    Can someone out there please tell me if Creative Suite CS 5.5 is compatible with the new Mac OS Maverick.

    It seems that Adobe are ready to sell products, but they make pretty darn almost impossible to ask a simple question.

    Hi ARTSAUCE,

    Please visit: http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html

  • problem with windows mail (using Vista) after automatic updates installed

    After the installation of the automatic update of windows I can't receive or send email on windows Messaging.  Get the box asking username and password and when I did, he asked again.  Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates?  I can access my email on the site, so is not their problem but with my computer.

    Hello

    Try the following methods:

    Method 1:

    Try to download and reinstall Windows Mail using the link:

    http://support.Microsoft.com/kb/941090

    In the link above, go to download and install the update.

    Method 2:

    Solve problems with Windows Mail

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

    Reference:

    Working with Windows Mail in Windows Vista

    http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

Maybe you are looking for