Connected to the internet, but the browser does not open

I have a HP Pavilion 23 all in one.  After a power failure, the browser won't open, even though I am connected to

the internet via Wi - Fi.  With the exception of the internet, all other functions of the computer are working very well.

I use Windows 8.

Does anyone know how to solve this problem.  All other computers in the House are working via Wi - Fi without any problem.

THX

Hello

Open a command prompt and type "ipconfig/release" (without the quotes)

Then type ipconfig/renew

Try also ipconfig/flushdns and ipconfig/registerdns

Are you using IE? Set the default values in Internet Options, Advanced tab (see below).

Stop router and cable/DSL modem. Disconnect both the power supply for a few minutes. Reconnect devices to current alternative and energize.

Always have a problem? Run the spelling system. The instructions are here.

Perform a boot time hardware diagnosis the patient.

Jaco

I'm not an employee of ch *.

"" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

HP products:
810-150se office
17 t - j000 Notebook
H8 1380t CTO Desktop
560z Desktop

Tags: HP Desktops

Similar Questions

  • System it is connected to the internet, but my browser does not display a web page.

    XP has forgotten how to connect to the internet.

    XP is always connected to the net fine, but today he forgot.  When I try to set up the net through the Control Panel, it says I am already connected, but
    Google does, and I can't ping the server in the CLI.  How can I fix it, please?  I send you this PCLinux, on the same machine
    and the same hard drive.
    Thanx. -doug

    Hi dougmack,

    1. What happens when you try to connect using Internet explorer?
    2. What is the type of internet connection you use?
    3. Did you the latest changes on the computer?
    4. You have security software installed on the computer?

    Method 1

    Check if the problem persists in mode safe mode with networking mode.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Method 2

    If the problem does not persist in mode safe mode with networking mode, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
    4. When you are prompted, click restart to restart the computer.

    Also check the State of the network adapter on the computer by using the Device Manager.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

  • Firefox is running in the Task Manager, but the browser does not open.

    This happened after the most recent update v 27. Gateway win8 running, working every day before this update, doesn't work now.

    Thanks for this information. I tried to move that file saved passwords, but while the instructions are clear... because the instructions lead in the new profile only... not how to copy files from the old profile (or maybe they did and I'm not) I think I'll just skip this step and just manually enter them as visited Web sites ask for them. .

  • After closing a browser window and if I open a new browser window, the browser does not open by my home page in tools/options/commissioning, it loads the last page

    recently, at the opening of a new browser, all is using and closed my last session opens

    several widows will open and no matter what the tabs were opened by respective windows will open and not through tools/options/start/homepage

    It never happened until recently and nothing else seems to have changed or new programs etc has been loaded or changed

    You can remove the user.js, as it shouldn't be there unless you have created the file yourself.

    If you set the pref in this file then you'll lose open tabs if you need to restart Firefox after installing a new extension, as this is the main reason for the use of this preference.
    So remove the user.js file or at least this line if you want to continue to be reset possible other present prefs in the file each time you start Firefox.

    This file is read every time you start Firefox, so changes made to the Pref set via this file only last for the current session.

  • WEIRD file extensions from the browser does not open

    Shell script for save on my local website and they have *.sh *.ksh extensions. When I try to view the contents of these files from Firefox it will 'stop in the weeds' open a new tab for each line [I think] in the file. I can rename all files have a *.txt extension but rather Firefox will say to treat all *.sh and identical *.ksh *.txt files, but I can't figure out HOW to do this.

    Any help is appreciated - I have looked at the issue of option 'Applications', but could not figure out how to add a new Type of "content."

    If you get a beautiful download dialog box, and then select never Firefox as the program to manage the file.

    See:

    You can get an overview of the URL with the view-source: Protocol to make Firefox to open the file.

  • After refreshing 39.0 beta of Firefox, the browser does not open a Web site that opens in a new tab.

    "SSL received a low ephemeral Diffie-Hellman key in the handshake message exchange of keys to the server." (Error code: ssl_error_weak_server_ephemeral_dh_key)

    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Contact the Web site owners to inform them of this problem. »

    The page used to load in a new tab before I chose Firefox refresh. I can't know how to allow Firefox to open Web pages in a new tab when selected in the tab in use.

    Hi, this means that the Web server you are trying to reach is vulnerable to the vulnerability of the impasse recently published: http://arstechnica.com/security/2015/05/https-crippling-attack-threatens-tens-of-thousands-of-web-and-mail-servers/
    Please report to the webmaster of the site in question to fix this...

  • My works wireless, but my connection to the LAN does not work?

    I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

    Hello

    Sorry I'm not quite clear about the situation.

    You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

    If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

    In general.

    Check the Device Manager for the entry of valid card of the wire.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    ----------------------------------

    Try installing the latest drivers from the card manufacturer support page.

    Download the drivers and extract them to a folder of your choice.

    In Device Manager, right-click on the adapter.

    Click Update drivers and choose her browse my computer for drivers.

    Choose let me a list of choices, click on disk and point to the folder with the drivers.
    -------------------------------------

    Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

    Turn off the computer and the router, reset the router and the computer.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    On the State of intellectual property.

    TCP/IP and its variables usually look like this.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    Typical TCP/IP status looks like this.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    Physical address
    is the MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1.
    IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ------------------------

    Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted

    Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • My Mozilla Firefox browser does not open 4.5 sites that I use the most. That is, among other things, Gmail, Facebook, LinkedIn and other 2. I have re installed twice and got

    My Mozilla Firefox browser does not open 4.5 sites that I use the most. That is, among other things, Gmail, Facebook, LinkedIn and other 2. I have re installed twice and got a version update, but the problem is still there. Please help me, I am so worry not.

    Thank you.

    Shakeel.

    See:

    You can try to reset (power off / on) of the router.

    Do a check with some malware malware, analysis of programs on the Windows computer.

    You need to scan with all programs, because each program detects a different malicious program.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • BlackBerry smartphone browser does not open and the screen is frozen

    I got my flashlight for about a week and it is very buggy. First of all it sometimes hangs when I try to open the browser. Other programs work perfectly once I hit escape a few times, but the browser does not work again until I upgrade or downgrade the OS. I keep having to go down and upgrade that takes forever to get my browser to work. Also the phone goes into sleep mode, even though I have it set to 20 seconds for backlight turns off.  Third problem I have with the phone is they continue to tell the browser how advanced is that it will not always support the Flash even if Blackberry has partnered with Adobe. I regret buying a torch instead of a droid.

    Start by doing a battery pull - with the machine on, remove the battery and wait 15 to 30 seconds before reinserting.  Then just wait for the device to reboot.  This should solve at least some of the problems you encounter.

    As for Flash, it is supposed to happen, however it is simply not yet available.  I hope that Adobe will have this ready to go shortly.  As for Flash on the Droid, as a heads up, I heard not so positive things here.  Apparently, there are a lot of bugs, and it is far from an ideal configuration.  I hope that Adobe will fix Flash for Android and I hope we'll get a decent work for the BB version before long.

    I hope that info helps!

  • Download CC for the trial of the Ps does not open but window flashing, what should I do?

    When I click to open the file .exe creative cloud, the window that I'm (folders, browser, etc.) will Flash several times, but the application does not open.  Looks like there is a crash, but no information as to why, or what I can do differently!

    I use a Windows 7 Professional with Service Pack 1.  I downloaded Chrome and IE with the same results.  Firefox only opens even adobe.com, https://creative.adobe.com/products/download/photoshop, or something similar Web sites.

    Sgoddard475 do you get specific error messages when opening the creative Cloud Desktop application.  Please, see install and update the apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for more details on how to install the Adobe Creative applications provided with your membership.

  • See connection to the server does not see any source

    Hello

    I have a very big problem, my opinion-connection to the server does not see any computer desk-source. I had seen some sources but not all a few hours ago. At this point, I did not see the sources I so did many trys to see this source. Overall I don't have luck, and now I see no source.

    The problems started with a VM Windows Server 2003 EE SP2, I need training to be deployed with a view. I have not seen this virtual machine, either I chosse linked clones or not.

    The journal of the events of this virtual machine show, auto login TP Server service not started right.

    I hope to have some ideas that will help me to solve this problem.

    Greetings

    You can use a server OS in a pool of Terminal Server services.  If you want to set up a desktop computer, you will need to use a desktop supported OS.   You can find operating systems supported in the Administrator's guide, http://www.vmware.com/pdf/view31_manual.pdf.

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  • The browser does not start after you have turned off and turned on the computer

    The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

    Thank you

  • I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the erro

    I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the error remains. I tried uninstalled and installed the application and the error remains. I use Windows 8.

    Manually delete the cache of the preview of your user folder.

    Mylenium

  • Preview "HTML5 in the browser" does not...

    Hello

    I recently had the problem where Preview "HTML5 in the browser" does not work. All I get is the "loading" animation

    I tried several different projects using Chrome and Firefox.

    Overview "in the browser" works very well.

    Let me know if you have any ideas!

    Thank you.

    Ryan

    Hi Ryan

    You're on a PC? If so, it is quite easy to find the folder. Just close Captivate, then find the icon that you use to open the Captivate. Right click and look at the properties. From there, you should see in the shortcut at the bottom tab on the left is a button allowing you to 'open file location '. Click on that, and Windows Explorer opens. From there, find the Utils folder. Open it and you have a CleanPreferencesWin file that you can run.

    See you soon... Rick

  • I have the latest version of Camera Raw in CS6 Extended, but still, it does not open my pictures. What can I do?

    I have the latest version of Camera Raw in CS6 Extended, but still, it does not open my pictures. What can I do?

    Thank you, but I actually solved the problem by using the hotfix installer.

Maybe you are looking for

  • iTunes does not remember which track/file reading in an album

    I use v.12.4.1.6 on my desktop. I have a lot of audio books, most of which are divided into 2, 3 or more files. Whenever reading moves to the 2nd or subsequent file, and I stop listening and close iTunes, when I try to reread the book (?) once again,

  • What is my VPN Secure?

    Hello I had a subscription to a VPN, especially since I can do banking online in public places.  But as I was put in place, this message came from the Mac network settings: "When you use PPTP, password and all data sent or received on this connection

  • solenoid USB 6212

    I'm trying to control a solenoid TTL using a USB 6212 and LabView.  I'm new to LabView and don't know if my code is correct.  I'm also not sure which way I'm supposed to use.  I appreciate all help.

  • Wide screen of Animation?

    Hey guys quick question. On your Z5 when you leave the screen turns off automatically due to the delay, which is your animation? He dim out and instantly turn off or does have a fade on the effect? Mine fades and turns off without a fade out effect w

  • deactivation of the password

    I use a laptop Samsung R730.  I AM A USER, IS A DESKTOP PC.  the laptop is a failure at startup and displays, "the operating system not found '.  I've restored the days earlier, when he was just purchased with the preinstalled windows recovery proces