Connected to the Internet of VPN remote access VPN clients
I need to remote VPN clients to connect to the Internet from the same server VPN ASA
"client connects to ASA the external interface VPN tunnel can access Internet from the same external interface ASA new."
you need to configure "same-security-traffic permit intra-interface" on the SAA.
Also, need to configure the relevant statements of nat for your range of pool of customers.
Global 1 interface (outside)
NAT (outside) 1 access-list anyconnectacl
where anyconnectacl is the pool for your customers:
permit ip 172.16.1.0 access list anyconnectacl 255.255.255.0 any
Tags: Cisco Security
original title: when I try to access the help topics in the utility of Windows backup and some other programs I get a screen in the right panel that says I am not connected to the internet when I am.
When I try to access the help topics in the utility of Windows backup and some other programs I get a screen in the right panel that says: I am not connectedto the internet when I am. Does anyone have a solution to this problem so I can use the help topics?
You try to access the items online or offline help?
a. press F1 on the keyboard.
b. click Options, and then click settings.
c. check to improve my search online help
d. click on apply and OK.
I have an ADSL account and when I vpn in our network using cisco VPN 3015 vpn client can't access the internet more locally. I have to use our internal proxy server on the network. Is it possible to make the vpn tunnel but also use the local internet DSL for browsing connection?
You must set up split tunnelling tunnel, while only some packets are sent through the tunnel, the rest get out in clear packages just as usual.
In 3015, create a list of network under Config - Mgmt policy - traffic Mgmt - list networks, this list includes your internal networks (you want to be dug traffic). Then go under the group to which the client connects to, on the Client configuration tab, select only the network of tunnels in the list, and then select your list from the drop-down list box. Reconnect and're you good to go.
Keep in the spirit of split-mining is considered a bit of a security risk because your PC is now accessible from the Internet AND you have a VPN directly in your internal network. If someone can take possession of your PC, then they have access to everything. You can also watch in allowing both client firewall stuff.
My new UHTV Samsung detects the private network (router) OK, but the TV does not connect to the Internet.
All other devices (PC, radio) I can access the Internet through the router without problems.
Before I read too many books, can someone point me in the right direction?
I tried everything in the book - without success; so finally, I reset and reconfigured the router.
He now works as usual, and I hope it will stay like that.
Thanks for you patience and support.
HelloI have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.Thank youoriginal title: wireless internet
Do you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.
I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop
· What is the exact error message?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start and then click Run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article to reset the TCP/IP settings.
How to reset the Protocol Internet (TCP/IP)
It says its connected to the internet and it can download the automatic updates, but when I open internet explore or mozilla or browser accesses a web page.
The problem does not change if it connected to a hard line or wireless.
The computer is a Latitude D620 on windows xp, if that helps.
What happens when you try?
Have you tried resetting IE? (Tools |) Internet Options | Advanced...)
I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.
Maybe this can help, http://www.ezlan.net/wireless.html
Jack-MVP Windows Networking. WWW.EZLAN.NET
I can connect to the Internet fine, ping works, but I can't connect to the router settings.
- Router IP: 192.168.1.1
- IP address: 192.168.1.150 USING static IP
- Browser: Safari
- Error message: Safari cannot open the page because the server dropped the connection unexpectedly.
- If you need a card, leave a reply!
Hey Harpo1! Try to access the configuration page using a computer connected to the router. If it does not connect to the page, reboot the router and use a different web browser could help. You can also try to temporarily unplug the modem and see if you can access it.
Original title: Internet connectivity.
Internet connectivity. I can't connect to the internet from the computer at home. Get the message "primary DNS server is online but doesn't react don't not to connection attempts." Remote Firewall might be blocking connection. Name of the filter GUIID mfe is connect-legend-v4. McAfee Firewall is enabled. Turned it off temporarily with the same result.
Did you change on your computer before the show?
Follow the steps mentioned below:
Network connection problems
Method 2: Try resetting the TCP/IP stack.
To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself
How to reset the Protocol Internet (TCP/IP)
If the same problem still persists, then try the next method.
Method 3: update the network driver.
Steps to update of network driver:
a. click the Start button.
(b) in the search box type devmgmt.msc and then press ENTER.
c. Select the network card device and right click on it
d. now, select Properties.
e. in the Properties window, on the driver tab, click Update driver.
f. after the installation of the updates, restart the computer.
For more information visit:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly.
Method 4: Definition of obtaining DNS on automatic
a. Click on start and then Control Panel.
b. go to the networking and sharing Center and then click on change adapter settings.
c. right-click on connection to the Local network and select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. Select obtain DNS server automatically an address and press Ok.
f. Select obtain IP address automatically.
i. Repeat steps for Internet Protocol version 4 as well.
Recently, my laptop has trouble to connect to my home network. It's a laptop Dell and Windows Vista. This laptop used to connect wirelessly to the network without any problem, but lately, whenever it connects, it is said that "local access" and does not allow me to use the internet. " This problem occurred at the same time I replaced my old router with a new. Another laptop and other devices can still connect to the internet with this new router with no problems, but my laptop stops the message "local access only".
After some research, I discovered that in typing "Cmd" in the search bar after clicking the start menu, run this program as an administrator, type "netsh int ip reset" in the command prompt, then by restarting my computer would fix my problem and my laptop would work very well and connect to the network and to the internet with no problems. However, as soon as my laptop is entered 'sleep' mode or has been disabled, when it was turned on again the problem persists and I have to follow the process of using the command prompt and restart the computer every time I turned on my laptop.
As you can imagine, this process can be quite annoying and I would like to find a more permanent solution to my problem, especially since the past several times, I tried this workaround, it failed, so my laptop is once more without internet access. If anyone has any suggestions, it would be appreciated I am completely puzzled. Thanks for any help.
I suggest you try the steps from the following link:
Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
In addition, you can disable IPv6 to see if that nor does not affect the wireless adapter.
To disable IPv6:
(a) go to start, right click on the network, and then click Properties.
(b) network and sharing window will appear, then click on manage network connections.
(c) network connections window will appear. Here you can right click on the network adapter that you want to disable IPv6, then click Properties.
(d) in the local area network connection properties window, clear the Internet Protocol Version 6 (TCP/IPv6) check box, and then click OK.
I suggest you try the steps from the following link:
Windows wireless and wired network connection problems
Title: "error 638: the remote server is unresponsive in a timely way." What in the world is that supposed to mean?
I have known the above error (for 2 weeks now) whenever I try to connect to the internet via modem huawei e160. I have not installed any programs recently. I physically contacted my ISP and according to them, the modem works properly and that the problem is with my computer. A professional COMPUTER friend told me that he once experienced a similar problem and the solution in the end was re - install the operating system. I did as much with PC to get back that far. Someone please help coz it is a nightmare.
I had the same problem. And just uncheck the 'Operator operator-assisted' Option on the "Advanced" tab in the window 'Manage settings of the map' did the job. Try it. You will surely succeed.
I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network. I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com. I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?
You can try a system restore...
.. .choose time, until this problem (you may tick to show more older restore points).
I have an Acer laptop with Windows 7. Every time I have to connect to the Internet via Google, or attempt to access my emails on Windows live mail, it takes forever to connect to the time and the high bar always notes that Windows does not. Please notify. This happens only in the last year, no problems prior to this.
What type of connection Internet?
What Antivirus utility do you use?
This happens in other web browsers?
If you are on a wireless connection, try switching to a wired connection and try the download.
Click Start, type: cmd
Right-click on cmd, and then click Run as administrator
At the command prompt, type the following:
leave the command prompt
Click Start, type: folder
Delete the contents of the temp folder
Restart the computer and try to download again.
If the problem persists, try resetting your router if you are connected to one.
Turn off the router, unplug it, wait 10 minutes
Plug it in again, power up once again
Reconnect the Ethernet cable
Try to access these web services again.
Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?
Disable the firewall and check the connectivity in media center.
Maybe you are looking for
something with firefox that allowed me to check on all programs to ensure that they are up-to-date.
Hi, how can I read my Micro SD (with SD adapter) - (8 gb SDHC), my PC don't see this map. If I plug in my 2 GB SD micro is all ok. Is the problem with SDHC? (or 8 GB capacity?) Thank you [email protected]
Hello HP, my x 2 split keyboard stopped working about 2 months ago and yes it's a confirmed hardware problem since I just bought 5 months ago, it is still under warranty so I him sent to the hp service center for repair. After a month, they told me t
Hello I'm having issues get the Realtek Audio in my Acer TravelMate 8371 working under Windows 8. While the drivers I'm trying generally install without problems as speakers and the line out / mic-in do not work. Is there anyone who got in Windows 8?
Hello I have a Photosmart 8250 installed on a Windows 7 computer. The printer works well and I know now that the HP Solution Center is no longer available for Win 7 so no Toolbox is available here. However, HPs link called "What Happened HP Soluti