Connected to the wireless network but no Internet access?

I recently got a Packard bell easy note laptop ts shows its connected to my wireless connection but when I open Internet explorer, it can not display any web page, anyone know what could be the problem? It connected correctly to my last connection Wireless at home.

Hi,

You did changes to the computer, before the show?

Method 1:

Run the network troubleshooter, and check.

Using the troubleshooter from network in Windows 7

Method 2:

Consult the following link:

"Internet Explorer cannot display the webpage" error in Internet Explorer

Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

See also,

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/Ping.mspx?mfr=true

Note: The link above also applies to Windows 7.

Tags: Windows

Similar Questions

  • T510 - wireless question - connects to the local network but no Internet access

    Hi all

    I have a laptop Lenovo T510 with Windows 7.

    Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

    I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

    Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

    Please help me to get this resolved.

    Thank you

    Pavan K

    Thank you all for your support and your help... its working fine after re-starting the router

  • B110A connects to the wireless network but no PC connection

    Hi Forum,

    I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

    However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

    When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

    Can anyone help please?

    Kind regards

    Amol

    Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

    What did he say?

  • My PC is connected to the wireless network, but it is impossible to open any internet page. I went through the diagnosis of Internet Explorer, see below.

    Diagnosis of last run time: 28/01/12 10:16:32 Gateway diagnosis

    Entry door

    Info the following proxy configuration is used by IE: automatically detect settings: enabled Automatic Configuration Script: Proxy Server: Proxy bypass list:

    info could not get the proxy settings via the Proxy Automatic Configuration mechanism

    Info this computer has the following (s) default gateway: 0.0.0.0

    warn that there is no default gateway entry

    repair automatic action: reset the network connection

    action to disable the network card

    activation of the card network action

    successfully activated information network adapter

    Info this computer has the following (s) default gateway: 0.0.0.0

    warn that there is no default gateway entry

    user redirection of information in support of the appeal

    IP layer diagnostic

    Corrupted IP routing table

    prevent the default route is missing or not valid

    Invalid entries in the ARP cache

    action cache ARP has been emptied

    Diagnosis of IP Configuration

    Invalid IP address

    detected info valid IP address: 192.168.0.1

    Wireless diagnosis

    Wireless - Service disabled

    Wireless - user SSID

    required user input action: specify the name of the network or the SSID

    Wireless - first installation

    Info the name of the wireless network (SSID) to which the user wants to connect is IrinaLaptop-router.

    Wireless - Radio

    detected info valid IP address: 192.168.0.1

    Wireless - off limits

    Wireless - hardware problem

    Wireless - Novice user

    Wireless - network Ad - hoc

    Wireless - less preferred

    Wireless - 802. 1 active x

    Wireless - Configuration mismatch

    Wireless - low SNR

    WinSock diagnostic

    WinSock status

    info all base service provider entries are present in the Winsock Catalog.

    channels of information the Winsock Service provider are valid.

    Info entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

    Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

    Info entry RSVP UDP Service Provider provider passed the loopback communication test.

    Info entry RSVP TCP Service Provider provider passed the loopback communication test.

    Info connectivity is valid for all Winsock service providers.

    Diagnosis of network adapter

    Network location detection

    Info to help home Internet connection

    Identification of network adapter

    Info network connection: name = connection to the LAN, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN

    Info network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless

    Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394

    Info network connection: name = connection high speed, device = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

    Info network connection: name = blank, peripheral = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

    Info both Ethernet connections and wireless available, ask the user for selection

    required user input action: select network connection

    Info Wireless connection selected

    State of the network adapter

    Info network connection status: connected

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity

    warn HTTP: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

    warn HTTP: error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

    WARN HTTPS: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

    WARN HTTPS: error 12007 connecting to www.passport.net: the server name or address cannot be resolved

    WARN FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

    WARN FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

    error could not make an HTTP connection.

    error could not make an HTTPS connection.

    error could not make an FTP connection.

    I did not want to do this (restore point). However, I found a solution. It comes: http://forums.techguy.org/networking/1029348-network-connection-status-media-disconnected.html

    Where there are two crucial steps (do not know if the two were needed) RUN command (1) netsh int ip reset reset.log and (2) netsh winsock reset catalog

    After a restart, hey presto my wireless connection was repaired. This seems useful, but not essential (shows wireless performance but not the solution): http://wpc.475a.edgecastcdn.net/0047...etup.1.2.0.exe which is run Xirrus Wi-Fi Inspector 
    Thanks for your time!
    Good bye
  • How can IM connected to the wireless network, but not to the internet, I fix?

    my laptop can no longer connect to the internet, but for the wireless network I can view other computers on the network, but can't go on the internet it says unidentified network.
    I took all the troubleshooting steps to resolve this problem without success.
    all ideas

    Scott,

    Are you the same Scott, I tried to help the last month? If this is you, I left a couple more views. In one of them, I explained that exactly the same problem you encounter happened on my son's computer. I just disabled the router, waited for about ten seconds and he turned his back and that's what it took. I used actually utility of Windows troubleshooting and he advised me to do.
  • Connected to the wireless network, but can't see all the networks

    I want to look at the properties of a wireless network that I'm not connected, but I can't do this, because even though I am connected to the Internet, some networks are appearing on the list. Please see the image as an attachment.

    Hello Nathaniel,

    Thanks for posting your query on Microsoft Community forum.

    According to the description of the problem, you are connected to internet but cannot see the wireless network through which you are connected. Perhaps, the reason behind this is that some settings get corrupted. Then try below mentioned methods and see if it helps.

    Have you tried to restart the computer and check the status of your problem.

    Try to run in built store and see if it helps you to solve the problem.

    Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

    Run the network troubleshooter utility:

    Try to follow the steps described in the article mentioned below and see if it helps you to solve the problem.

    Why can't I find a wireless network?

    If the problem persists you can try the steps provided by Professor Grim replied on January 19, 2012 in the thread mentioned below.

    No display in Windows 7 64 bit wireless network

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • problem connecting to the wireless network, but it worked yesterday.

    Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

    Home Wireless works, why can't connect?

    Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

  • XP is connected to the wireless network but can't get online...

    I have a wireless network that works very well with my computer laptop and desktop so its punt in Mac OS, but when I boot XP, it cannot get online. He sees the network and says I'm connected but IE and Firefox keep the display of error messages telling me that they can't connect. If I click on the icon of repair under wireless network connection settings, it would loop forever in the IP address area you are looking for. I figured out how to manually enter the IP address and the error is now in the clearing the DNS cache.

    I also tried implementing the wizzards and messed with the different service settings, but still no luck.

    Does anyone have an idea what I am doing wrong or what needs to be done to get this connected to the internet?

    Why windows is so difficult? my Mac is hooked up very well with little effort.

    I'm so frustrated. Help, please

    If you are connected your computer must be able to connect to the menus wireless router and have an IP address valid (169 . xx.xx.xx isn't a valid IP address).

    http://www.ezlan.NET/example/lan_details.jpg

    -------------------

    Maybe this can help, http://www.ezlan.net/wireless.html

    Also make sure that the security software on your system does not block the connection.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • can not print says printer connected to the wireless network but pc says printer is offline

    happened before the printer says connected to the network but pc says offline

    Ok

    Have you tried the Network Diagnostics to see you the network can see the printer

    Go to www.hp.com/go/tools

    Network Diagnostics has a link to the wireless printing site that can help out you.

  • My HP 5510 is connected to the wireless network, but cannot communicate with the printer?

    I connect a HP all in one Photosmart 5510 to an ATT Uverse wireless network. It says printer is connected and printer tests are all good.., but still when I try to print, I get an error message saying that cannot communicate with the printer, make sure that it is attached to the network?

    I restarted services, restarted..., still the same case. It says its connected, but do not connect or print. Very frustrating...

    What operating system?

    If Windows, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

    What did he say?

  • HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

    I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

    Hi @lelg,

    I understand that you want to configure the printer on the wireless network. I can help you with this.

    Uninstall the printer software.

    Uninstalling the printer software.

    Restore the default settings of the printer.

    Go to Configuration, restore the default values.

    Cycle power to the router and the computer.

    Run the installer on the printer wireless.

    Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

    Print a configuration page to get the IP address of the printer.

    Print a Configuration report.

    Select the method.

    If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

    If it loads the page from the network printer then the printer is on the network.

    Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

    Select your operating system, click Next and click on the software to download and install.

    Test the printer.

    What operating system do you use? How to find the Windows Edition and the Version on your computer.

    Please provide detailed results if you're still having problems.

    Good day!
    Thank you.

  • Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected.

    Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected. Is there a way to get to show him that I am connected?

    original title: my computer says that I am not connected to the internet when I am.

    Another solution: Red connection system icon even though I am connected... X

    "Try this. It worked for me.

    I finally removed my network security and the State of the network now shows me as connected. The Red Cross has disappeared. It seems that Windows 7 does not support WPA2-PSK. I can't imagine that's the case. Any ideas as to why, as it is installed on my PC, is an option for WPA2-PSK? As I said, the material is supported and worked with XP. »

    ...

    And another... where the problem was related to the third-party software:

    "I found a solution. I had recently updated my GOAL to the latest version and it is incompatible with the new vista. It seems to be a small bug in the operating system. How I solved it is uninstall AIM and the other program "Viewfinder" or something like that...
    After that I uninstalled both of these programs, the Red Cross had disappeared and I had no network problem either. I now use trillian and I have no problem. I hope this helps! »

  • problems connecting to the wireless network - the network (no internet access) proxy setting

    Former title: yellow triangle wireless

    My computer can connect to the wireless router but cannot connect to the internet. I try to connect with the ethernet with cable modem connection & it still does not work. The other laptop works fine but my does not.

    1. I have uninstalled & installed the network card.

    2 restart the apater modem & network cable

    3. I get 'Windows could not detect a network proxy setting.

    4. when I "Network & Sharing Center" and under "show your network activity" I get "identification."

    5. "identiyfing netgear" below said 'no Internet' when you are connected to netgear

    Windows IP configuration

    The host... name: Jeffrey -.
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless Network Connection 2 wireless LAN adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Virtual WiFi Miniport adapt
    Physical address.... : 1C-65-9D-BF-E2-BF
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    Description...: Realtek RTL8188CE WLAN 802.11n PCI-E NIC
    Physical address.... : 1C-65-9D-BF-E2-BF
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::cc8f:f2cd:dd7c:ccd1% 17 (Preferred)
    Autoconfiguration IPv4 address. . : 169.254.204.209 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP...: disabled

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    Description...: Realtek PCIe FE Family Controller
    Physical address.... : 1C-75-08-73-8F-F1
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {342574F9-0D0B-4337-B59D-E7373E959066}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {25F2C90C-9E95-491A-BDFC-4F4CDA2FE33D}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #2
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 12:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Teredo Tunneling Pseudo-Interface:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Hi istraight1,
    a few steps, I recommend you to see exactly what this question:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    and
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-could-not-automatically-detect-this/d243dea1-d1c8-4C4A-ba96-2b49bc9bab1a?TM=1338167520088

    and finally:
    http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/548ca07e-F04E-4973-8719-8c09959f1ca6hope this helps.
    B Eddie

  • I can connect to the local network, but not to the internet

    Why in an internet connection, I can connect to the Local network, but not to the Internet.
    I have valid IP address and configuration is good.

    I recommend you read some threads here in the forum about similar issues.
    If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
    Using the WiFi network, you must check if the common WLan parameters are favourable;
    Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

    Good bye

  • Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

    I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

    However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
    How can I create a network bridge and get the wireless internet to connect please?

    Any help to fix this would be appreciated,
    P

    This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

    If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
    Most Microsoft Valuable Professional

Maybe you are looking for