Connected wireless but no internet access

Similar Questions

• How can I reset or fix my router wireless or (lost the ability to connect wirelessly to the internet) access point

  Wireless hub works, other computers are connected

  On a laptop, I lost the ability to connect wirelessly to the internet (message: limited connectivity)

  Recommended by the system solution: reset or repair your access point or wireless router

  How can I do?

  I think that what you aim for is "power cycle".

  To do this, simply unplug the router/access point power adapter. Wait a minute. Then reconnect it.

  Hope this helps

  Post back if necessary

  ___________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 - connected to wireless but no Internet access

  I understand that this has been asked before and there are many "solutions" posted on different forums that are not relevant to my problem or simply do not work.

  A few weeks back, I was on vacation, my daughter called to ask if I had cut the internet router and BT Hub as she was not able to connect to the internet. It had been fine the day before. I didn't and I couldn't do a lot the lot so said I would sort when I got home.

  I just spent the better part of a week trying to access the internet on his laptop, a Toshiba running Windows 7. I know that the internet and wireless works perfectly as his cell phone is sitting right next to my Sony Vaio running Windows 8. Also, my Sky TV, Kindle, Iphone and iPad to my wife connect seamlessly. It would seem that the possible culprit is a Windows Update which took place on 31 August. I tried to go back to her but she was advised by a friend to uninstall the update and she tried to make a file at the same time and now the reversion will not work.

  When the laptop starts up, until I connect, there is a dialog box indicating a wireless connection and correct network is listed.

  

  However, after I connected, even if the wireless connection is still showing as a good signal and 'Connected', it is currently connected to: section shows network not identified; No Internet access.

  

  I ran the gamut of the instructions in uninstalling/reinstalling the drivers of network, playing with the settings of Virtual WiFi miniport and almost everything that is proposed on the other forums but not luck so far.

  All I know is that someone will want to see the command ipconfig/all results so here they are. I removed the spaces in line to get them on a single page.

  

  Short using 'rebuild the hard drive' Toshiba, I am now at a loss to know what to do. I would also like to know WHY this happened and how it could be avoided in the future.

  Any constructive help appreciated.  Thanks in advance.

  WINDOWS 7: CONNECTED WI - FI NETWORK, but 'no INTERNET '.

  Solution:

  Start > search, then type "services.msc", click on "services": "

  in "extended", make sure that "DHCP Client" is the "road". Then click on 'standard' of a window, make sure that 'Internet connection sharing (ics)' is not 'disabled '. If this is the case, then click on it. In the "General" window, search for "Startup type", it through «Automatic (...)»

• Z500 connected wireless but no internet

  I recently moved to a new country house. My Lenovo Z500 worked perfectly in my old House for 2 years. In my new home, my laptop connects to the router wireless (Netgear) but unable to connect to the internet. My other devices (tablets, smartphones) are connected and have no problem. I tried many of the suggestions I found on this site, but nothing helped. The troubleshooting says "your computer seems to be configured correctly, but the device or resource (DNS server) does not. My Lenovo Z500 is pretty useless now, please help! Thank you.

  problem solved: changed the DNS settings in ipv4 to automatic.

• Compaq Presario C776CA connects wireless but no internet

  Compaq Presario C776CA Notebook PC

  Never had a problem until we changed our internet provider... now, he cannot get a wireless internet connection. If I plug the ethernet cable, it works very well. We have a 2 other laptops in the apartment that all connect to the wireless very well (if it's relevant, one is a mac book and the other is a computer laptop gateway).

  I tried all troubleshooting stuff and nothing works. I tested haven-t, but I do not know the laptop would be still not connect to other wireless connections, but not this one. WHY and how to fix it?

  This is the error I get on Google chrome: (sorry, in French)

  Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the DNS server address.

  Help, please?

  Hello:

  If you have a network Atheros wireless card in your laptop, see if the latest driver solves the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Paul

• Network connection wireless and cable - Internet access that allows on a computer that is connected to the network cable connection to a networked computer

  I have 3 desktop PCs. Machine A is Win 7, the B machine is XP, the C machine is XP.

  Machine A is connected to the router via cable and internet connection works. Machine B is wireless (the same router as a machine) and the internet connection works when I used that machine has b. Now I plugged in the machine C B machine with a crossover cable and wireless internet machine B does not work.

  I tried the IP and gateway addresses manually (since deleted). If I ping the computer A to B I get the answer to time to stop and even if I ping the B to A computer. However ping computer B to C and C to B work.

  I hope that I have omitted some important parameter, if anyone can point me in the right direction

  Hello

  If the bridge, the connection between C and B is the first to be configured with a static IP address that is on a different subnet * and then fill.

  Alternatively, you can use ICS, http://support.microsoft.com/kb/306126/en-us

  * On the subnet

  Classical IP looks like this (example), 192.168. 1 .x the first three groups are also called subnet, they identify specific network, x can be a number between 0 and 255 and it identifies each unique device on the network.

  An IP address of 192.168. 2 .x would be a subnet to another network.

  To assign a static IP address, see http://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• T510 - wireless question - connects to the local network but no Internet access

  Hi all

  I have a laptop Lenovo T510 with Windows 7.

  Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

  I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

  Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

  Please help me to get this resolved.

  Thank you

  Pavan K

  Thank you all for your support and your help... its working fine after re-starting the router

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Satellite L500 connection ok but no Internet after upgrade to Windows 7

  Hello
  I just upgraded my Satellite L500 to Windows 7 everything is fine except that I have no internet access. I have a strong connection to my wireless home network and can connect to other wireless devices to the network ok. I also tried to connect using cable, but I have the same problem - connected but no internet access.

  I ran ConfigFree utility and it does not find a problem. I ran the troubleshooter in Windows and it is unable to solve the problem but tells me that the wireless network doesn't have a valid IP configuration.

  I have reset the modem and the router, without effect.

  I checked all the drivers and BIOS are the latest versions.

  I tried to enter an IP address manually rather than get an automatically. Still no luck.

  Any ideas I can try? I hope someone can help.
  Thank you.

  Hello

  For me it sounds like that the problem is the router, and not the laptop because you wrote that with cable connected even happens on WLAN connection.

  If you go into the menu of the router, what is the status of the internet connection? Your router has a connection or not?

• Work wireless, but not Internet

  I use a WRT54G Router.  I am able to connect to my home network via the wireless but no Internet on any of my wireless devices.  It works only via Ethernet.  The firmware version is v3.01.3.  Any ideas what I did wrong?

  Hi mullahraheil, to properly isolate the problem, try changing the name of the network wireless and communication channels. Try the channels 11,9,3 or 1. Try to reconnect. If the same persists, you need to maybe do a hard reset on the device and reinstall it from scratch.

  To make the correct reset, please press the reset button at the back of the router for 30 seconds when the unit is turned on. Unplug the unit. Reinstall everything from scratch. Hope that helps.

• 8 win having address IP & gateway, but not Internet access

  This laptop is IPv4 address 192.168.1.13 (valid for my setup) and gateway 192.168.1.1 (even), but no Internet access? What is going on??

  I've implemented a number of victory 8 machines, but this laptop that I just got and win update 8, now, will not connect to the internet?

  All my other machines, phones, computers, iPad, android tablet, all to connect to the router and have internet access.

  I searched this problem and tried a few suggestions to no effect:

  1. drivers of device updated for lan and WiFi and restarted and still NOGO!
  2. has run a few commands cmd for ipconfig

  What is going on??

  Thank you very much for any help you might be able to provide!

  -Brian

  Brian

  Please download this app from the
  Run it
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• HP 15 Notebook PC: Laptop stops to connect wireless to the internet

  Laptop not connect wireless to the internet.  In this intermittent case. Called HP several times. Will work and then happen again!

  My computer still under warranty.

  Hi @Hoopla1 ,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediatelyassist you with the wireless card.

  Thank you.

• connection exists but not Internet

  I router AI UN xavier 7968 cnnecte my pc connection exists, but PA Internet

  I router AI UN xavier 7968 cnnecte my pc connection exists, but PA Internet

  Please re-post this in terms of the language in the menu drop-down list at the bottom of the page. This forum is for English only.

  

  If you can't find the language you need, additional language support can be found here...
  http://support.Microsoft.com/common/international.aspx

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Using the network authentication Windows 7 name of user and password to connect to a network (internet access)

  When I try to CONNECT to my network, I get a window of security Windows network authentication requires a user name and password. I have no idea this here. Apparently until I find it I will not be able to connect wirelessly to the Internet

  I assume you are using Windows 7 and trying to connect to the wireless network? There are many discussions here for precisely this question and answers not very unhelpful.  Have you tried to manually add the wireless network and select Connect automatically?   This seems to have solved my problems.

  1. open network and sharing Center (click on start - Control Panel - Network and sharing Center)

  2. click on manage networks wireless on the left side and opens a new window - manage wireless networks that use (wireless)

  3. click on add

  4. click on add a network profile

  5. Enter the name of the network - security Type and security key (this info should be provided by your internet service provider)

  6. check the box that says "Connect automatically when this network is in range" and click the next button

  7. click on the close button in the next window that opens (or you can take a look at the settings, if you like, and then click close)