Connecting a laptop to a WRT160N Linux

Similar Questions

• No network work - computer laptop IdeaPad Z4070 and Linux Fedora 20

  Salam, Salvation

  Currently, I am not able to connect to the internet using my laptop IdeaPad Z4070 using Linux Fedora 20.

  The network device is detected as:

  Rev10 Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
  Smart Wireless attached b723

  How can I install the necessary drivers? and is there another Linux distro that works well with the laptop, instead of Fedora?

  Help, please! I bought the laptop 3 months ago and cannot connect to net till now.

  For those following and reading of this ... I installed Debian successfully after a format. Debian was chosen because it offers a realtek (package called firmware-realtek) driver.

• 39L4333DG will not connect to laptop WiDi - timeout

  I'm tempted to try to get the WiDi to work.
  First of all: TV is updated to the latest version via autoupdate.
  Laptop is 2nd generation than i7 2675 WiDi compatible with all the latest drivers.

  I can detect the TV, I can try to connect. Laptop request PIN, the PIN is displayed on the TV.
  TV says then connects, so it is portable. After a while (like 30 seconds) the TV said that there was a timeout. Laptop keeps trying to connect for a few seconds more and that's it.

  Any idea what the problem might be?

  > Laptop is 2nd generation than i7 2675 WiDi compatible with all the latest drivers.

  First, please check if computer laptop supports WLan Intel WiDi appropriate card.
  Where it is, you must update the Intel WiDi software.

  Here, on this page from Intel, you will find the required software from Intel:
  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031109.htm

  You must update: Intel®, Intel® Wireless Driver driver.
  Need to install the latest version of the software Intel WiDi and other Intel WiDi Widget

  I hope this helps!

• Toshiba laptops work well with Linux?

  I'm a big fan of Toshiba, but it's the last time I buy a Toshiba product. Producing none of Toshiba laptops running Linux? Least toshiba engineers could do is to make sure that a live ubuntu cd works on the laptop, to make sure that the fan starts and check maybe even the graphics driver works. If it's the fault of ubuntu then drop a bug in launchpad. As far as I know, none of the new Toshiba laptops have a fan that works properly, don't waste your money.

  > All computers laptop Toshiba work well with Linux?
  In General, they work well with Linux. If you see this section of Linux, you'll see that menu use Linux on various models of Toshiba laptops.

  Officially, Linux is not supported on Toshiba laptops and it may happen that you will have a few small problems with Toshiba specific things like the multimedia keys.
  A bit this section Linux and pick up the info you need.

• Equium A100-147: can I connect my laptop to my desktop hard drive?

  My computer laptop satellite has a permanent error when I turn it on: "autochk program not found - skipping autocheck.

  I've tried everything I can think (and advice of you internet) to get the data on my laptop hard drive, including the creation of a boot disk (using an external floppy drive) and a knoppix disk and nothing worked.

  Now, I suppose that if I can connect the hard drive laptop on my desk, I can get the data in this way? But how can I do?

  I bought an IDE 3.5 "to 2.5" adapter disk hard drive, but the instructions indicate that laptop hard drive must have a male connector 44? The hard drive is a Toshiba MK6034GSX and when I removed it I couldn't see 44 pine?

  Any help would be greatly appreciated.

  Thank you

  Yes you can do it, but you need USB 2.0 2.5 hard drive enclosure Kit ".
  Make sure that you buy a box with the right interface. Your HARD drive is SATA HDD.

  If you can connect the laptop HDD s to every desktop or laptop as external HARD drive and you will have access to all stored data.

• How to connect my laptop seconded to the display of lightning?

  How to connect my laptop spare Windows PC to the display of lightning?

  It doesn't seem likely... this thread explains a little bit problems > http://apple.stackexchange.com/questions/181277/connect-a-thunderbolt-display-to-windows-8-Bureau

• IAM trying to connect my laptop to my TV using a cable video. s, but I can't do now.i once before, but I think that I went somewhere and cloned it .anybody me help please jack

  trying to connect my laptop to my TV can't do it now, I did it once before, but I think that I went somrwhere and cloned it .can sume one help me pleas jack.      E-mail address is removed from the privacy * if we're cut off

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  It will be useful.

• connect my laptop to my tv with HDMI.

  Im tring to connect my laptop to my sony bravia TV with a hdmi cableand I have this error: unsupported signal. Please check the output of the device.

  I plugged the laptop in the other lcd TV and have no problem, I just plug the hdmi cable and select the correct output and my screen is replicated on the TV. is there something you need to do for sony model? IV tried changing the outputs and other things but have no luck. ??

  I think you would be better served if you posted on a forum of Sony TV or looked at the web site of Sony.

• Connect a laptop running Windows XP to a LCD via HDMI

  Hello

  I did a fresh install of windows XP SP3 on my Sony Vaio Z series. I bought a HDMI cable to connect my laptop to an LCD (DYNEX 32 '') so that I could watch movies and so. Unfortunately, the LCD doesn't detect any signal from my laptop. Is there a solution for this problem... I have to install some driver or what?

  Please advice...

  Hello, mykhtarz

  Since you have made a new installation, it is likely, that you do not have the required driver installed software to automatically switch to the HDMI. I recommend first check with the manufacturer for updated driver software.

  There may also be a combination of keys on the laptop to change HDMI manually, usually a combination of # FN + F. You'll need to refer to the documentation of your laptop for which key can control the HDMI.

  You can also go into the display properties and change the default view for the HDMI. To check the display properties, follow these steps:

  1. Click Startand then click Control Panel.
  2. Click appearance and themes, and then click display.
  3. In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to designate as the primary monitor.
  4. Click to select the use this device as the primary monitor check box. Note that this check box is not available when you select the icon of the monitor that is currently set as your primary monitor.

  For more information, see the following link: How to configure and use multiple monitors in Windows XP:http://support.microsoft.com/kb/307873

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

  Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Hello

  1. If it works well before?
  2. Did you of recent changes to the computer before the show?
  3. What happens when you connect the VGA cable to TV to the laptop screen?

  I suggest to refer to the article and perform the steps mentioned there.

   

  How to configure and use multiple monitors in Windows XP:

  http://support.Microsoft.com/kb/307873

   

  Reference:--

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

   

   

   

• I WOULD LIKE TO CONNECT MY LAPTOP TO MY FLAT SCREEN TV

  I WOULD LIKE TO CONNECT MY LAPTOP TO MY TV SCREEN DISH, ARE THERE INDIVIDUAL PARAMETERS SHOULD BE FOR THIS?

  I HAVE THE CABLE AND CAN CONNECT, JUST DO NOT KNOW AFTER THAT.

  http://www.Google.com/search?q=connect+Windows+XP+laptop+to+TV&ie=UTF-8

• OfficeJet Pro 8610: Unable to connect 2 laptop HP Officejet Pro 8610

  I have 2 HP laptops each with Win7 (64 bit) SP1 and I'm trying to connect to the computer laptop 2nd in an OfficeJet Pro8610 to print wireless.  I tried using the CD rom and download the drivers online but I can connect this laptop to the printer.  I get to a point where the login process requires the printers claim id code but when I enter the code I got a message that this code is already in use (the other laptop is connected wireless) and in order to connect, I have to delete the other laptop.  I am at a loss here because I had both the same laptops connected to my old 6700 OfficeJet and could print without any problem installing wireless at all.

  What I'm missing here with the 8610?  Thank you

  Alkymst

  Alkymst

  The code you enter is likely to set up ePrint for the printer address.  Once this has been done it is not necessary to do it again.

  An alternative is that the laptop is connected directly to the printer with direct wireless wireless.  In this case, you will need to disconnect the laptop computer from the printer to use the other laptop.

  A better configuration would be to connect the printer to your router wither wireless or cable LAN cable.  It would give the IP address which you can find by pressing the front panel of the printer to the printer (if the printer is in mode "sleep"), then tap the wireless at the bottom of the screen.  This will bring up the LAN wireless status, where you can find the IP address of the printer.

  You should be able to set up the printer with the driver available at http://www.hp.com/go/toolsinstallation wizard.

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)