Connecting flash drive not recognized

Similar Questions

• Nighthawk R8500, USB 3.0 Flash drive not recognized USB 3.0 Port, Port of only 2.0

  My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.

  At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.

  Thanks in advance for any help, Carlos

  Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos

• Flash drive not recognizing USB - c

  I just bought the new macbook 12 inches with the retina. I am very satisfied, but I'm having some trouble with two flash drives that I bought on Amazon. Sometimes, they recognize and sometimes they are not then I reboot

  and they work fine. What is happening to someone else? How can I fix?

  Others have noticed the same thing. Here are two threads, you might look at. In my eyes, there was not a single solution that works for most people with this problem. I do not recommend that you report your problem to Apple directly but I guess that they are aware.

  Retina Macbook does not notice external HD

  On Macbook USB devices

  Good luck

  Richard Glendon

• USB flash drive not recognized and install

  USB port works fine in my computer, I have Windows vista basic with acer laptop
  but when a usb flash drive is inserted it not recognize and install
  unitentified error of device and driver to the generic sound of end error

  pls help

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• ScanDisk flash drive not recognized by windows desktop 7

  My Cruzer Scandisk SDCZ36 - 032G works on my laptop but not on my desktop pc

  Running windows 7, but the problem has been resolved. I have 8 usb ports and I tried them all and one finally worked. I thought it might be a problem with how the BIOS has been set, but fortunately, it was a simple fix.  Thanks for the attention to my problem, well rated.

• USB Flash drive not working no-V112b

  Unable to content on a USB flash drive, not getting not formatted. It is within the warranty period. How the guarantee?

  Only if the drive was still usable and allowing for the write you to read the summary file but not. A read-only error.

  You declare that you cannot access the drive at all, is - this correct? If so, I would get the replaced disk.

  If you can read the content, not only to write and run this tool to fix this error.

  Reach
  http://www.PNY.com.tw/index.php?CLS=2&mode=download
  Download USB Driver Flash Format Tool (Ufix-II).
  You will need to have installed to extract the .rar of 7 - Zip. It is downloadable for free. http://www.7-zip.org/download.html
  You will extract the downloaded file "RecoverTool_V2.00.42_M1223 8CE.exe" and run.

  IF this is not what is wrong, then the drive is bad. Trying to force the reader to format isn't going to work. Replace it.

  It will be useful.

• In Vista, AutoPlay opens briefly when connect flash drive but is not visible

  AutoPlay briefly blinks when I plug a flash drive but is not visible. How can I configure what to maintain visible autoplay?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  It will be useful.

• external USB drives not recognized under xp pro 64

  I bought a genuine version of XP Pro 64 to load on my computer and because Win 7 froze with drivers nVidia graphics.

  When I plug a recently bought Seagate Goflex or one of the new Western Digital external hard drives, they are not recognized.

  They do not show on my computer or disk management at all.

  They appear in Device Manager with a yellow question mark big under 'other devices '.

  I right click on the hard drive in the Device Manager to update the driver, and it always fails.

  Before ask you, these USB drives work perfectly on my other XP Home 32 System. The cables are good.

  I tried different ports, front and rear... no good.

  My system XP 64 Prp is updated w/Windows update and software chip to the motherboard.

  Strangely, I have a hard drive WD Passport USB 500 Gb one-year-old that works fine on XP 64 system.

  WD technicians say that I am the only one with this problem. PlugNPlay needs no driver, what do say.

  I also have IDE/SATA USB cable w / the power cable, I use to connect my old internal drives.

  Works fine on the XP Home 32, but I get the error "USB to ATA/ATAPI Bridge" in the device with the 64-bit System Manager.

  Yes these devices are all "turned on."

  Something is missing on the XP 64 system.

  Help is very appreciated.

  Been looking for a solution for a week now.

  Thank you.

  Hello

  See the following articles that may help you resolve this problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196
  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
  http://support.Microsoft.com/kb/314634

• Newly installed internal Second hard drive not recognized

  L1701X XPS laptop (running Win 10). Installed a second 500 GB WD hard drive that is not recognized in the BIOS. I've updated (flashed) BIOS to the A10 and I updated all drivers recommended by Dell Support.

  If I remove the new second player and hover over the first (original) hard drive to the second vacant slot it works very well and also appears in the BIOS - so it seems to me that there is no problem with the second player port.

  I tried everything I could find on the Net about it, for example, to check the connection of the second disc, but nothing done yet.

  Can someone help me with this?

  I'm pulling this Post because I don't get all of the possible solutions to my question.  Thanks to the two people who have asked questions.

• Built in hard drives not recognized Mac pro 2010

  Hi all. At work, I have a Mac Pro 2010 tour which has two built in disks, running 10.10.5. Recently, the computer is not recognizing its own built in disks. The keyboard eject button will not open any of them, nor will be the eject option in the menu bar - he thinks that there are no drives connected. It is a work computer, and we'd love to have this feature back. Thanks in advance!

  

  Are they after reboot:

  -Display in Disk Utility?

  -Display in System Profiler under SATA/SATA Express?

  OS X: about system information and System Profiler - Apple Support

  https://support.Apple.com/en-us/HT203001

  Have you tried pulling sleds and reintegrate them?

  Have you tried to move to another Bay sleds?

  Try resetting the SMC

  Reset of the management system (SCM) on your Mac controller

• External hard drive not recognized

  It seems as if my Macbook Superdrive is not recognized by both my MacBook after upgrade to El Capitan.  I took my external drive to the Apple iStore, it has been tested and I've been told that it does not.  Then, I bought a new disc (R1999.30 - a lot of money!), and after connecting to my two computers today, I realized that this new album is also "does not work".  After each update, something that has worked well in the past, does not work. Has anyone found a solution yet?

  How you try to burn the disks?

  You get an error message? So then what?

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• External Toshiba HARD drive not recognized on USB 2.0 ports, but only on USB 3.0

  Hello

  I have a Toshiba drive external HARD 750 GB USB2.0/USB3.0
  Now, this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port.

  I have try on port USB2.0 computers different (desktop, laptop) but it doesn't work. The LED is the lightning, but the drive does not appear in the file Explorer.

  You have any ideas?

  Thank you

  > Now this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port

  USB 3.0 port 900mA feeds. The USB 2.0 port common provides 500mA.
  I think that the HARD drive needs more 500mA power in order to work properly.

  So if you want to use the HARD drive on USB 2.0 ports, I recommend you to use a USB Y cable which allows to connect the HARD drive to two USB 2.0 ports

• EliteOne 800 G2: EliteOne 800 G2 NIC driver not recognized with Windows Deployment Service WDS

  Hello

  I have just taken receipt of 5 new HP EliteOne 800 G2 23 "no touch machines. All PC's are generally imaged using Windows Deployment Services.

  I downloaded sp72515.exe that is the Intel I219 NIC driver pack for Windows 7 64 bit and injected these drivers into Windows Deployment Service and updated the boot LiteTouchPE_x64.wim file. Windows reported it went slowly and the 6 drivers concerned are all showing loaded with so much success in WDS.

  

  

  Problem. When I PXE boot the Windows EliteOne 800 G2 pilot of the CARD is not recognized by the 800 EliteOne G2.

  Wizard error

  A connection to the deployment share (\ < servername > \Deploymentshare$) could not be made. The following network device did not have a driver installed. PCI\VEN_8086 & DEV_15B7 & SUBSYS_8058103C & REV_31

  Hello:

  The only suggestion I can offer would be to try the driver directly from Intel...

  The 2nd file listed on the left side of the page is for W7 x 64.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-?v=t

• 1.5 TB external DRIVE not recognized on various laptops disk

  Hello

  I was wondering if someone could help me.

  I bought my 1.5 terrabyte toshiba external hard drive just for more than a year. It works fine on my other computer, laptop and cell phone from my boyfriend, but when I joined four other new laptops (all different brands) recently it was not recognized at all on these laptops.

  Is there something wrong with my outside or something on these computers it prevents to be recognized? Do you know how I can fix this problem?

  Thank you very much!

  Hello

  And if you connect the external HARD drive to your boyfriend s computer laptop, everything is always ok? Only problems with new laptops?

  Well that s really strange have you tried another USB cable and different USB ports?

  Maybe on the new laptops the antivirus or firewall blocks access to the external hard drive. Check your security software and to allow external devices.